Need help with BARS 4.0.12 - 4.0.13 upgrade

Hello,
I'm a VoIP noob and need help with a BARS upgrade. To resolve a known problem (Bug #CSCsi32637) we need to upgrade BARS from 4.0.12 to 4.0.13. This is per TAC. However, no one in our company has done this before. I've reviewed the 4.0.12 Admin Guide since I was unable to find any admin docs for 4.0.13. However, I have several questions about this upgrade that hopefully someone here can help with:
1) The install for 4.0.12 requires a reboot of the server. Is this the same for 4.0.13?
2) CCM version is 4.1(3)sr6; any problems known with BARS 4.0.13 and this version of CCM? I didn't see
anything in the Rel Notes or via the Bug Toolkit (figure it never hurts to ask).
3) Will the previously input configuration settings (i.e., Data Source Servers, Storage Location, Schedule) be preserved or will I have to reinput these settings?
4) Any known issues with performing this upgrade while controlling the server via VNC?
5) The 4.0.12 docs state that "To successfully back up the Cisco Unified CallManager database, the backup server and backup targets must exist in the same cluster and have the same version of BARS installed". So BARS must be installed on my publisher (the Backup Server) AND my three subscribers? I'm not finding BARS on these subscribers now.
Many Thanks for any input,
Brian Read

1) Yes, any version requires reboot after install
2) not that i'm aware of
4) you'll need to reconfigure it
5) no
6) although it's recommended there is no real need to backup any other server than the PUB which contains the master DB, any SUB only needs to pull the info from PUB in case of crash and reinstall
HTH
java
if this helps, please rate

Similar Messages

Need help with JTextArea and Scrolling

import java.awt.*;
import java.awt.event.*;
import java.text.DecimalFormat;
import javax.swing.*;
public class MORT_RETRY extends JFrame implements ActionListener
private JPanel keypad;
private JPanel buttons;
private JTextField lcdLoanAmt;
private JTextField lcdInterestRate;
private JTextField lcdTerm;
private JTextField lcdMonthlyPmt;
private JTextArea displayArea;
private JButton CalculateBtn;
private JButton ClrBtn;
private JButton CloseBtn;
private JButton Amortize;
private JScrollPane scroll;
private DecimalFormat calcPattern = new DecimalFormat("$###,###.00");
private String[] rateTerm = {"", "7years @ 5.35%", "15years @ 5.5%", "30years @ 5.75%"};
private JComboBox rateTermList;
double interest[] = {5.35, 5.5, 5.75};
int term[] = {7, 15, 30};
double balance, interestAmt, monthlyInterest, monthlyPayment, monPmtInt, monPmtPrin;
int termInMonths, month, termLoop, monthLoop;
public MORT_RETRY()
Container pane = getContentPane();
lcdLoanAmt = new JTextField();
lcdMonthlyPmt = new JTextField();
displayArea = new JTextArea();//DEFINE COMBOBOX AND SCROLL
rateTermList = new JComboBox(rateTerm);
scroll = new JScrollPane(displayArea);
scroll.setSize(600,170);
scroll.setLocation(150,270);//DEFINE BUTTONS
CalculateBtn = new JButton("Calculate");
ClrBtn = new JButton("Clear Fields");
CloseBtn = new JButton("Close");
Amortize = new JButton("Amortize");//DEFINE PANEL(S)
keypad = new JPanel();
buttons = new JPanel();//DEFINE KEYPAD PANEL LAYOUT
keypad.setLayout(new GridLayout( 4, 2, 5, 5));//SET CONTROLS ON KEYPAD PANEL
keypad.add(new JLabel("Loan Amount$ : "));
keypad.add(lcdLoanAmt);
keypad.add(new JLabel("Term of loan and Interest Rate: "));
keypad.add(rateTermList);
keypad.add(new JLabel("Monthly Payment : "));
keypad.add(lcdMonthlyPmt);
lcdMonthlyPmt.setEditable(false);
keypad.add(new JLabel("Amortize Table:"));
keypad.add(displayArea);
displayArea.setEditable(false);//DEFINE BUTTONS PANEL LAYOUT
buttons.setLayout(new GridLayout( 1, 3, 5, 5));//SET CONTROLS ON BUTTONS PANEL
buttons.add(CalculateBtn);
buttons.add(Amortize);
buttons.add(ClrBtn);
buttons.add(CloseBtn);//ADD ACTION LISTENER
CalculateBtn.addActionListener(this);
ClrBtn.addActionListener(this);
CloseBtn.addActionListener(this);
Amortize.addActionListener(this);
rateTermList.addActionListener(this);//ADD PANELS
pane.add(keypad, BorderLayout.NORTH);
pane.add(buttons, BorderLayout.SOUTH);
pane.add(scroll, BorderLayout.CENTER);
addWindowListener( new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
public void actionPerformed(ActionEvent e)
String arg = lcdLoanAmt.getText();
int combined = Integer.parseInt(arg);
if (e.getSource() == CalculateBtn)
try
JOptionPane.showMessageDialog(null, "Got try here", "Error", JOptionPane.ERROR_MESSAGE);
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Got here", "Error", JOptionPane.ERROR_MESSAGE);
if ((e.getSource() == CalculateBtn) && (arg != null))
try{
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 1))
monthlyInterest = interest[0] / (12 * 100);
termInMonths = term[0] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 2))
monthlyInterest = interest[1] / (12 * 100);
termInMonths = term[1] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
if ((e.getSource() == CalculateBtn) && (rateTermList.getSelectedIndex() == 3))
monthlyInterest = interest[2] / (12 * 100);
termInMonths = term[2] * 12;
monthlyPayment = combined * (monthlyInterest / (1 - (Math.pow (1 + monthlyInterest, -termInMonths))));
lcdMonthlyPmt.setText(calcPattern.format(monthlyPayment));
catch(NumberFormatException ev)
JOptionPane.showMessageDialog(null, "Invalid Entry!\nPlease Try Again", "Error", JOptionPane.ERROR_MESSAGE);
} //IF STATEMENTS FOR AMORTIZATION
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 1))
loopy(7, 5.35);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 2))
loopy(15, 5.5);
if ((e.getSource() == Amortize) && (rateTermList.getSelectedIndex() == 3))
loopy(30, 5.75);
if (e.getSource() == ClrBtn)
rateTermList.setSelectedIndex(0);
lcdLoanAmt.setText(null);
lcdMonthlyPmt.setText(null);
displayArea.setText(null);
if (e.getSource() == CloseBtn)
System.exit(0);
private void loopy(int lTerm,double lInterest)
double total, monthly, monthlyrate, monthint, monthprin, balance, lastint, paid;
int amount, months, termloop, monthloop;
String lcd2 = lcdLoanAmt.getText();
amount = Integer.parseInt(lcd2);
termloop = 1;
paid = 0.00;
monthlyrate = lInterest / (12 * 100);
months = lTerm * 12;
monthly = amount *(monthlyrate/(1-Math.pow(1+monthlyrate,-months)));
total = months * monthly;
balance = amount;
while (termloop <= lTerm)
displayArea.setCaretPosition(0);
displayArea.append("\n");
displayArea.append("Year " + termloop + " of " + lTerm + ": payments\n");
displayArea.append("\n");
displayArea.append("Month\tMonthly\tPrinciple\tInterest\tBalance\n");
monthloop = 1;
while (monthloop <= 12)
monthint = balance * monthlyrate;
monthprin = monthly - monthint;
balance -= monthprin;
paid += monthly;
displayArea.setCaretPosition(0);
displayArea.append(monthloop + "\t" + calcPattern.format(monthly) + "\t" + calcPattern.format(monthprin) + "\t");
displayArea.append(calcPattern.format(monthint) + "\t" + calcPattern.format(balance) + "\n");
monthloop ++;
termloop ++;
public static void main(String args[])
MORT_RETRY f = new MORT_RETRY();
f.setTitle("MORTGAGE PAYMENT CALCULATOR");
f.setBounds(600, 600, 500, 500);
f.setLocationRelativeTo(null);
f.setVisible(true);
}need help with displaying the textarea correctly and the scroll bar please.
Message was edited by:
new2this2020

What's the problem you're having ???
PS.

I need help with shooting in my flash game for University

Hi there
Ive tried to make my tank in my game shoot, all the code that is there works but when i push space to shoot which is my shooting key it does not shoot I really need help with this and I would appriciate anyone that could help
listed below should be the correct code
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
    //making it so the user can't shoot for a bit
    shootAllow = false;
    //declaring a variable to be a new Bullet
    var newBullet:Bullet = new Bullet();
    //changing the bullet's coordinates
    newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
    newBullet.x = tank_mc.x;
    //then we add the bullet to stage
    addChild(newBullet);
listed below is my entire code
import flash.display.MovieClip;
    //declare varibles to create mines
//how much time before allowed to shoot again
var cTime:int = 0;
//the time it has to reach in order to be allowed to shoot (in frames)
var cLimit:int = 12;
//whether or not the user is allowed to shoot
var shootAllow:Boolean = true;
var minesInGame:uint;
var mineMaker:Timer;
var cursor:MovieClip;
var index:int=0;
var tankMine_mc:MovieClip;
var antiTankmine_mc:MovieClip;
var maxHP:int = 100;
var currentHP:int = maxHP;
var percentHP:Number = currentHP / maxHP;
function initialiseMine():void
    minesInGame = 15;
    //create a timer fires every second
    mineMaker = new Timer(6000, minesInGame);
    //tell timer to listen for Timer event
    mineMaker.addEventListener(TimerEvent.TIMER, createMine);
    //start the timer
    mineMaker.start();
function createMine(event:TimerEvent):void
//var tankMine_mc:MovieClip;
//create a new instance of tankMine
tankMine_mc = new Mine();
//set the x and y axis
tankMine_mc.y = 513;
tankMine_mc.x = 1080;
// adds mines to stage
addChild(tankMine_mc);
tankMine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal(evt:Event):void{
    evt.target.x -= Math.random()*5;
    if (evt.target.x >= stage.stageWidth)
        evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
        removeChild(DisplayObject(evt.target));
initialiseMine();
    //declare varibles to create mines
var atmInGame:uint;
var atmMaker:Timer;
function initialiseAtm():void
    atmInGame = 15;
    //create a timer fires every second
    atmMaker = new Timer(8000, minesInGame);
    //tell timer to listen for Timer event
    atmMaker.addEventListener(TimerEvent.TIMER, createAtm);
    //start the timer
    atmMaker.start();
function createAtm(event:TimerEvent):void
//var antiTankmine_mc
//create a new instance of tankMine
antiTankmine_mc = new Atm();
//set the x and y axis
antiTankmine_mc.y = 473;
antiTankmine_mc.x = 1080;
// adds mines to stage
addChild(antiTankmine_mc);
antiTankmine_mc.addEventListener(Event.ENTER_FRAME, moveHorizontal);
function moveHorizontal_2(evt:Event):void{
    evt.target.x -= Math.random()*10;
    if (evt.target.x >= stage.stageWidth)
        evt.target.removeEventListener(Event.ENTER_FRAME, moveHorizontal);
        removeChild(DisplayObject(evt.target));
initialiseAtm();
function moveForward():void{
    bg_mc.x -=10;
function moveBackward():void{
    bg_mc.x +=10;
var tank_mc:Tank;
// create a new Tank and put it into the variable
// tank_mc
tank_mc= new Tank;
// set the location ( x and y) of tank_mc
tank_mc.x=0;
tank_mc.y=375;
// show the tank_mc on the stage.
addChild(tank_mc);
stage.addEventListener(KeyboardEvent.KEY_DOWN, onMovementKeys);
//creates the movement
function onMovementKeys(evt:KeyboardEvent):void
    //makes the tank move by 10 pixels right
    if (evt.keyCode==Keyboard.D)
    tank_mc.x+=5;
//makes the tank move by 10 pixels left
if (evt.keyCode==Keyboard.A)
tank_mc.x-=5
//checking if the space bar is pressed and shooting is allowed
if(evt.keyCode == 32 && shootAllow){
    //making it so the user can't shoot for a bit
    shootAllow = false;
    //declaring a variable to be a new Bullet
    var newBullet:Bullet = new Bullet();
    //changing the bullet's coordinates
    newBullet.y = tank_mc.y + tank_mc.width/2 - newBullet.width/2;
    newBullet.x = tank_mc.x;
    //then we add the bullet to stage
    addChild(newBullet);
if (tank_mc.hitTestObject(antiTankmine_mc))
        //tank_mc.gotoAndPlay("hit");
        currentHP -= 10;
        // remove anti tank mine
        removeChild(antiTankmine_mc);
if (tank_mc.hitTestObject(tankMine_mc))
        //tank_mc.gotoAndPlay("hit");
        currentHP -= 10;
        // remove anti tank mine
        removeChild(tankMine_mc);
    //var maxHP:int = 100;
//var currentHP:int = maxHP;
//var percentHP:Number = currentHP / maxHP;
    //Incrementing the cTime
//checking if cTime has reached the limit yet
if(cTime < cLimit){
    cTime ++;
} else {
    //if it has, then allow the user to shoot
    shootAllow = true;
    //and reset cTime
    cTime = 0;
function updateHealthBar():void
    percentHP = currentHP / maxHP;
    healthBar.barColor.scaleX = percentHP;
    if(currentHP <= 0)
        currentHP = 0;
        trace("Game Over");
    updateHealthBar();

USe the trace function to analyze what happens and what fails to happen in the code you showed. trace the conditional values to see if they are set up to allow a shot when you press the key

Need help with almost completed plugin engine project

Hi all,
For a while now I have been working on a plugin engine. After a few iterations, the engine is similar to the Eclipse engine, in that plugins use extension points and extensions to allow contributions. Unlike the eclipse engine I have added the ability for plugins to fire events through the engine and other plugins can add listeners, all through the plugin.xml manifest. Dependencies are mostly handled automatically at plugin load time (when extensions get resolved to extension points, and listeners get resolved to events). For the case where a plugin needs to use classes from another plugin, dependencies are also allowed to be declared. Like the eclipse engine, activation of plugins occurs the first time a class is used within the plugin's classpath, OR a plugin can be activated after it is loaded.
What I need help with is testing, working on examples to provide with the engine project, and feedback/suggestions before we release the M1 build. I am asking for those that are interested in this type of work to volunteer to help where applicable and possible. I want to provide a solid plugin engine to the java community, one that is easy to use, works well, and is pretty effecient in terms of resource usage and performance.
Of particular interest to me right at the moment is dealing with multiple versions. As I see it, the engine will be used within an application and as such plugins would be distributed with a specific application version. The plugin version itself is more of a notification as to what version a plugin is, although I imagine it will help when updating at runtime as well.
Just a few other details of the engine. It handles (or will soon) dynamic load, unload and reload of plugins at runtime. Plugins can be distributed in an archive file format, we call .par (Plugin ARchive), with additional plugin filename extensions configurable at runtime. The plugins can be developed and deployed in an expanded directory format as they are in Eclipse as well, or in the archive format. In the archive format they do not need to be unzipped when deployed, and they can contain embeded jar/zip libraries. The engine handles finding and creating classes directly out of the .par file at runtime.
Multiple locations to find plugins are configurable before the engine starts, and even after it starts more could be added to allow additional locations to find plugins. URLs are supported, and soon the HTTP protocol will be supported so that plugins can be downloaded and installed at runtime.
The project can be found at www.sourceforge.net/projects/genpluginengine. If you would like to get involved and help out, please sign up on the dev mail list and send an email to introduce yourself to the rest of the members on the list.
I'll also add that I am working on a Swing UI Framework built entirely from plugins. It provides a ready-to-launce UI application that developers can simply add their plugins to, extending various extension points of the framework to have menu items, toolbar buttons, status bar access, help and preferences dialog additions, file i/o choosers, tons of open-source components ready to use (or extend to add on to), and like Eclipse, hopefully... draggable window frames that can be dropped on any other frame to form a tabbed frame of windows. Some of this is a ways off, some is getting there now. Presently you can add menu items that do allow plugin activation when first clicked, so plugins can be loaded but not activated until needed. The Preference dialog works but is not completed, and a plugin that adds a plugin control panel to view all loaded plugins, activate them, load/unload/reload, view extension points, extensions, dependencies, etc is partially completed. The point is, to allow a ready to run UI framework in Swing with an easy path for developers to quickly build applications with. If you are interested in this, when you join the mail list and introduce yourself, indicate that you are interested in this as well, as we need help with plugin development for it and would appreciate more help here too.
Look forward to some replies.

Might I suggest setting up a project at a known project-site? I've seen your progress and questions posted here from time to time, but one of the drawbacks is that you have to fill each post with the entirity of your vision to explain what you're doing. That's a lot of text to read - and most folks will skip right over it.
On the other hand, a well-crafted, good-looking project web-site, with appropriate links and docs and vision statements, diagrams, etc. will have more likelyhood of attracting volunteers. java.net and sourceforge.net are likely spots to set up shop. In addition, you get CVS and bug-tracking systems, which can be quite valuable in such a large-scale project where there are lots of pieces.

Need help with Outlook 2013 connecting to Exchange server(2010)

Hi
I need help with Outlook 2013 and with my exchange server(2010) email account
After setting up account initially emails come in and than after an hour or two stop. My OWA is working fine with no issues. I have even created a forward rule in OWA to my GMAIL account whch works fine
However Outlook 2013 is not syncing messages, have difficulty in sending emails sometimes as it takes too long. In fact the connection also is intermittent. Even if the task bar shows connected to exchange, it seems that is not the case since new emails
and any emails I compose dont work. I have trouble shot the issue with my ISP and email service provide, but they havent resolved the issue I have also done a TraceRoute and that shows no drops or problems to he exchange server.
Can someone please help me resolve this matter so I can continue to use Outlook 2013( running Windows 8.1) in both my computers which have the identical problem
Look forward to a solution soon
Thanks

Hi Angela
Thanks for your message
To answer your questions, please note the following
a) My account is set up in Cache Mode( not online mode)
b) I am the only other user on the account
c) When the connection to the exchange server is broken, I see upon clicking connection tab that there is no information in the box, and when I press reconnect it starts showing "connecting"
d) When the connection to the server is there, it shows connection as "established"
e) Sorry I dont understand th meaning of CAS array in your environment? Can you pls explain
Since yday I have been using Outlook 2010 on desktop and Outlook 2013 on my laptop using Exchange 2013 account. So far all emails are syncing, and I can send emails from both computers. However, I am concerned that the connection can break-off anytime,
as it has done that in the past on both outlook versions. The max time it has worked without any problem is 48 hrs and than after that the same issue of not connection, not syncing and unable to send emails happens
My ISP has checked and there is no network connectivity issues. My email service provider has trouble shot the issue many times, but to no positive results. I have also changed the profile a few times, but the intermittent connectivity problem hasn't
been resolved.
Can you identify the possible causes and more importantly a working permanent solution please
Thanks
Mahesh

Need help with advanced applet

I need help with designing an applet as follows. Can someone give me a basic layout of code and material so i can fill in the rest or at leats give me some hints so i can get started since i am like no good at applets.
Design and implement an applet that graphically displays the processing
of a selection sort. Use bars of various heights to represent
the values being sorted. Display the set of bars after each swap. Put
a delay in the processing of the sort to give the human observer a
chance to see how the order of the values changes.
heres a website that does something similar
http://www.cs.ubc.ca/spider/harrison/Java/sorting-demo.html

elasolova wrote:
i will not help you this time. but if you buy me a candy maybe i can reconsider the issue. :PI suggest an all-day sucker.

Need help with Patch Tool in CS5

I am having a problem using the patch tool in Photoshop CS5. I click on the Patch Tool and select the Source option from the upper tool bar. Then I circle a gray area in the background of my photo and, holding down the left mouse button, I drag the selection to a black area in the background and release the mouse button. Instead of turning the selected area black it just makes the area slightly darker than it was originally. I just don’t understand why I can’t use the patch tool and any help would be appreciated.

Thank you very much for these suggestions. Robert
Noel Carboni <[email protected]> wrote:
Noel Carboni http://forums.adobe.com/people/Noel+Carboni created the discussion
"Re: Need help with Patch Tool in CS5"
To view the discussion, visit: http://forums.adobe.com/message/4308270#4308270

I need help with XML Gallery Fade in out transition. somebody please help me :(

I need help with XML Gallery Fade in out transition. somebody please help me
I have my post dont want to duplicate it

The problem doesn't lie with your feed, although it does contain an error - you have given a non-existent sub-category. You need to stick to the categories and sub-categories listed here:
http://www.apple.com/itunes/podcasts/specs.html#categories
Subscribing to your feed from the iTunes Store page work as such, but the episodes throw up an error message. The problem lies with your episode media files: you are trying to stream them. Pasting the URL into a browser produces a download (where it should play the file) of a small file which does not play and in fact is a text file containing (in the case of ep.2) this:
[Reference]
Ref1=http://stream.riverratdoc.com/RiverratDoc/episode2.mp3?MSWMExt=.asf
Ref2=http://70.33.177.247:80/RiverratDoc/episode2.mp3?MSWMExt=.asf
You must provide a direct link to the actual mp3 file. Streaming won't work. The test is that if you paste the URL of the media file (as given in the feed) into the address bar of a browser it should play the file.

Need Help With D&D Program

Hi, I'm not sure if I'm allowed to post questions on this forum but I can't find anywhere to talk to helpful people about programming.
I'm making a dnd interface for JComponents. So far I've made a simple program that has a Component that can be lifted from a container and braught to the glass pane then later moved to anywhere on the screen and dropped into the container below it. Here's where my problems come:
1) Rite now my 'Movable Component' is a JPanel which is just colored in. I want to either take a Graphic2d from a JComponent/Component and draw it on the JPanel or change the JPanel to the component I want to paint and disable the component.
The problem with getting the Graphics2d is that if the component isn't on the screen it doesn't make a graphic object. I tried messing with the ui delicate and overriding parental methods for paintComponent, repaint, and that repaintChildren(forget name) but I haven't had luck getting a good graphics object. I was thinking of, at the beginning of running the program, putting 1 of each component onto the screen for a second then removing it but I'd rather not. I'd also like to change the graphics dynamicly if someone stretches the component there dropping and what not.
The problem with disabling is that it changes some of the visual features of Components. I want to be able to update the Component myself to change how it looks and I don't want disabling to gray out components.
I mainly just dont want the components to do any of there normal fuctions. This is for a page builder, by the way.
Another problem I'm having is that mouseMotionListener is allowing me to select 2 components that are on top of one another when there edges are near each other. I don't know if theres a fix to this other than changing the Java Class.
My next problem is a drop layout manager, but I'm doing pretty good with that rite now. It'll problem just move components out of the way of the falling component.
One last thing I need help with is that I don't want the object that's being carried to go across the menu bar and certain areas. When I'm having the object being carried I have it braught up to the glass pane which allows it to move anywhere. Does anyone have any idea how I could prevent the component from being over the menu bars and other objects? I might have to make 1 panel is the movable area that can then be broken down into the 'component bank', 'building page' and whatever else I'm gonna need.
This is all just test code to get together for when I make the real program but I need to make sure it'll be possible without a lot of hacking of code.
Sorry for the length. Thanks for any help you can give.

The trick to making viewable components that have no behaviour, is to render them onto an image of some sort (eg a BufferedImage). You can then display the Image on a JLabel that can be dragged around the desktop.
Here is a piece of code that does the component rendering for you. This particular example uses a fixed component size, but you can modify that as you choose of course...public class JComponentImage
     private static GraphicsConfiguration gConfig;
     private static Dimension compSize = new Dimension(80, 22);
     private static Image image = null;
     public static Image getImage(Class objectClass)
          if (gConfig == null)
               GraphicsEnvironment gEnv = GraphicsEnvironment.getLocalGraphicsEnvironment();
               GraphicsDevice gDevice = gEnv.getDefaultScreenDevice();
               gConfig = gDevice.getDefaultConfiguration();
          image = gConfig.createCompatibleImage(compSize.width, compSize.height);
          JComponent jc = (JComponent) ObjectFactory.instantiate(objectClass);
          jc.setSize(compSize);
          Graphics g = image.getGraphics();
          g.setColor(Color.LIGHT_GRAY);
          g.fillRect(0, 0, compSize.width, compSize.height);
          g.setColor(Color.BLACK);
          jc.paint(g);
          return image;
}And here is the class that makes the dragable JLabel using the class above...public class Dragable extends JLabel
     private static DragSource dragSource = DragSource.getDefaultDragSource();
     private static DragGestureListener dgl = new DragMoveGestureListener();
     private static TransferHandler th = new ObjectTransferHandler();
     private Class compClass;
     private Image image;
     Dragable(Class compClass)
          this.compClass = compClass;
          image = JComponentImage.getImage(compClass);
          setIcon(new ImageIcon(image));
          setTransferHandler(th);
          dragSource.createDefaultDragGestureRecognizer(this,
                                                      DnDConstants.ACTION_COPY,
                                                      dgl);
     public Class getCompClass()
          return compClass;
}Oh and here is ObjectFactory which simply instantiates Objects of a given class and sets their text to their classname (very crudely)...public class ObjectFactory
     public static Object instantiate(Class objectClass)
          Object o = null;
          try
               o = objectClass.newInstance();
          catch (Exception e)
               System.out.println("ObjectFactory#instantiate: " + e);
          String name = objectClass.getName();
          int lastDot = name.lastIndexOf('.');
          name = name.substring(lastDot + 1);
          if (o instanceof JLabel)
               ((JLabel)o).setText(name);
          if (o instanceof JButton)
               ((JButton)o).setText(name);
          if (o instanceof JTextComponent)
               ((JTextComponent)o).setText(name);
          return o;
}Two more classes required by this codepublic class ObjectTransferHandler extends TransferHandler {
     private static DataFlavor df;
      * Constructor for ObjectTransferHandler.
     public ObjectTransferHandler() {
          super();
          try {
               df = new DataFlavor(DataFlavor.javaJVMLocalObjectMimeType);
          } catch (ClassNotFoundException e) {
               Debug.trace(e.toString());
     public Transferable createTransferable(JComponent jC) {
          Transferable t = null;
          try {
               t = new ObjectTransferable(((Dragable) jC).getCompClass());
          } catch (Exception e) {
               Debug.trace(e.toString());
          return t;
     public int getSourceActions(JComponent c) {
          return DnDConstants.ACTION_MOVE;
     public boolean canImport(JComponent comp, DataFlavor[] flavors) {
          if (!(comp instanceof Dragable) && flavors[0].equals(df))
               return true;
          return false;
     public boolean importData(JComponent comp, Transferable t) {
          JComponent c = null;
          try {
               c = (JComponent) t.getTransferData(df);
          } catch (Exception e) {
               Debug.trace(e.toString());
          comp.add(c);
          comp.validate();
          return true;
public class ObjectTransferable implements Transferable {
     private static DataFlavor df = null;
     private Class objectClass;
     ObjectTransferable(Class objectClass) {
          try {
               df = new DataFlavor(DataFlavor.javaJVMLocalObjectMimeType);
          } catch (ClassNotFoundException e) {
               System.out.println("ObjectTransferable: " + e);
          this.objectClass = objectClass;
      * @see java.awt.datatransfer.Transferable#getTransferDataFlavors()
     public DataFlavor[] getTransferDataFlavors() {
          return new DataFlavor[] { df };
      * @see java.awt.datatransfer.Transferable#isDataFlavorSupported(DataFlavor)
     public boolean isDataFlavorSupported(DataFlavor testDF) {
          return testDF.equals(df);
      * @see java.awt.datatransfer.Transferable#getTransferData(DataFlavor)
     public Object getTransferData(DataFlavor arg0)
          throws UnsupportedFlavorException, IOException {
          return ObjectFactory.instantiate(objectClass);
}And of course the test class:public class DragAndDropTest extends JFrame
     JPanel leftPanel = new JPanel();
     JPanel rightPanel = new JPanel();
     Container contentPane = getContentPane();
     Dragable dragableJLabel;
     Dragable dragableJButton;
     Dragable dragableJTextField;
     Dragable dragableJTextArea;
      * Constructor DragAndDropTest.
      * @param title
     public DragAndDropTest(String title)
          super(title);
          dragableJLabel = new Dragable(JLabel.class);
          dragableJButton = new Dragable(JButton.class);
          dragableJTextField = new Dragable(JTextField.class);
          dragableJTextArea = new Dragable(JTextArea.class);
          leftPanel.setBorder(new EtchedBorder());
          BoxLayout boxLay = new BoxLayout(leftPanel, BoxLayout.Y_AXIS);
          leftPanel.setLayout(boxLay);
          leftPanel.add(dragableJLabel);
          leftPanel.add(dragableJButton);
          leftPanel.add(dragableJTextField);
          leftPanel.add(dragableJTextArea);
          rightPanel.setPreferredSize(new Dimension(500,500));
          rightPanel.setBorder(new EtchedBorder());
          rightPanel.setTransferHandler(new ObjectTransferHandler());
          contentPane.setLayout(new BorderLayout());
          contentPane.add(leftPanel, "West");
          contentPane.add(rightPanel, "Center");
     public static void main(String[] args)
          JFrame frame = new DragAndDropTest("Drag and Drop Test");
          frame.pack();
          frame.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          frame.setVisible(true);
}I wrote this code some time ago, so it won't be perfect but hopefully will give you some good ideas.
Regards,
Tim

Need Help with the Clone Tool

I need help with the clone tool, in that when I clone (let's say grass as example), the new cloned area does NOT come out as sharp as the area selected. It comes out much softer and somewhat blurred. I have the opacity and flow both set at 100%. This is very frustrating since I can not get a true clone.

what "tip" do you have selected? where are you sampling from ( found in top option bar) ALSO make sure MODE is normal
http://helpx.adobe.com/photoshop/using/retouching-repairing-images.html
-janelle

Need help with new itouch

Please bare with me, while I 'try' to explain.
I have my itunes account linked to my iphone and macbook. I have bought my daughter an itouch for Xmas. Now I have set up a seperate itunes account for her on my other Windows laptop. So she is able to purchase apps without them going and clogging up my itunes... NOW this is the bit i need help with...
How can i transfer any music i have on my itunes to her itunes? and vice versa?
Thanks in advance

Right, I have now gone down the line of setting up a new user on my macbook, her own ID and then with the help of Mr google, I followed the steps of sharing my music, by moving my itunes media folder to a shared folder.
Now i got my music on her itunes libary but when i did a test download of an app, it wont show in the library. I have even done the 'transfer purchases'. and its still not showing. I am slowing loosing the will to live with it! I really need help.

Need help with a simple program (should be simple anyway)

I'm (starting to begin) writing a nice simple program that should be easy however I'm stuck on how to make the "New" button in the file menu clear all the fields. Any help? I'll attach the code below.
====================================================
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Message extends JFrame implements ActionListener {
     public void actionPerformed(ActionEvent evt) {
     text1.setText(" ");
     text2.setText("RE: ");
     text3.setText(" ");
     public Message() {
     super("Write a Message - by Kieran Hannigan");
     setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     setSize(370,270);
     FlowLayout flo = new FlowLayout(FlowLayout.RIGHT);
     setLayout(flo);
     //Make the bar
     JMenuBar bar = new JMenuBar();
     //Make "File" on Menu
     JMenu File = new JMenu("File");
     JMenuItem f1 = new JMenuItem("New");f1.addActionListener(this);
     JMenuItem f2 = new JMenuItem("Open");
     JMenuItem f3 = new JMenuItem("Save");
     JMenuItem f4 = new JMenuItem("Save As");
     JMenuItem f5 = new JMenuItem("Exit");
     File.add(f1);
     File.add(f2);
     File.add(f3);
     File.add(f4);
     File.add(f5);
     bar.add(File);
     //Make "Edit" on menu
     JMenu Edit = new JMenu("Edit");
     JMenuItem e1 = new JMenuItem("Cut");
     JMenuItem e2 = new JMenuItem("Paste");
     JMenuItem e3 = new JMenuItem("Copy");
     JMenuItem e4 = new JMenuItem("Repeat");
     JMenuItem e5 = new JMenuItem("Undo");
     Edit.add(e5);
     Edit.add(e4);
     Edit.add(e1);
     Edit.add(e3);
     Edit.add(e2);
     bar.add(Edit);
     //Make "View" on menu
     JMenu View = new JMenu("View");
     JMenuItem v1 = new JMenuItem("Bold");
     JMenuItem v2 = new JMenuItem("Italic");
     JMenuItem v3 = new JMenuItem("Normal");
     JMenuItem v4 = new JMenuItem("Bold-Italic");
     View.add(v1);
     View.add(v2);
     View.add(v3);
     View.addSeparator();
     View.add(v4);
     bar.add(View);
     //Make "Help" on menu
     JMenu Help = new JMenu("Help");
     JMenuItem h1 = new JMenuItem("Help Online");
     JMenuItem h2 = new JMenuItem("E-mail Programmer");
     Help.add(h1);
     Help.add(h2);
     bar.add(Help);
     setJMenuBar(bar);
     //Make Contents of window.
     //Make "Subject" text field
     JPanel row2 = new JPanel();
     JLabel sublabel = new JLabel("Subject:");
     row2.add(sublabel);
     JTextField text2 = new JTextField("RE:",24);
     row2.add(text2);
     //Make "To" text field
     JPanel row1 = new JPanel();
     JLabel tolabel = new JLabel("To:");
     row1.add(tolabel);
     JTextField text1 = new JTextField(24);
     row1.add(text1);
     //Make "Message" text area
     JPanel row3 = new JPanel();
     JLabel Meslabel = new JLabel("Message:");
     row3.add(Meslabel);
     JTextArea text3 = new JTextArea(6,22);
     messagearea.setLineWrap(true);
     messagearea.setWrapStyleWord(true);
     JScrollPane scroll = new JScrollPane(text3,
                              JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
                              JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
     //SpaceLine
     JPanel spaceline = new JPanel();
     JLabel spacer = new JLabel(" ");
     spaceline.add(spacer);
     row3.add(scroll);
     add(row1);
     add(row2);
     add(spaceline);
     add(spaceline);
     add(row3);
     setVisible(true);
     public static void main(String[] arguments) {
     Message Message = new Message();
}

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

I need help with adobe iv reader.

iam trying to pin a website using ie.it says the reader cannot read the website,i am not computer saavy so i donot know how to fix this issue, pls help,tyvm.

i am trying to pin a website in internet explorer to my task bar,i get a
message that adobe v1 could not decode the website, i am not computer saavy
so i don't know what that means,plus this is a new computer 4 me.plus it
worked fine a few days ago. tyvm 4 ur help.
regards,
ray nist
In a message dated 6/11/2013 9:27:11 P.M. Eastern Daylight Time,
[email protected] writes:
Re: i need help with adobe iv reader.
created by Pat Willener (http://forums.adobe.com/people/pwillener) in
Adobe Reader - View the full discussion
(http://forums.adobe.com/message/5400013#5400013)

Need Help with Inserting Timeline Markers

Friends,
I have not use my premiere element 3.2 since 2008 and forgot some of the procedures. now, I need help with the insertion of Timeline Markers. I did what the Help Page showed me. But the markers were not effective in the resulting DVD, or, even when viewing the video in the editing page as if thye were not there! Here is what I did:.
1) Click the Timeline button.
2) Click in an empty space in a video or audio track in the Timeline to make the Timeline active and deselect any clips.
3) Move the current-time indicator in the Timeline to the frame where I need the marker.
4) Click the Add Marker icon in the Timeline to place the Marker 5 times where I want them.
5) Verified that each Timeline Marker is present at the intended place.
6) Burned DVD
7) Can NOT jump to any of the intended Marker in the Resulting DVD during playback.
The question is "What did I do wrong or didn't do?" It seems that I did the same before and worked! Please advise!
Also, what are the significance of the Red line just below the Timeline and the yellow bars inside the video and audio frames. But after preforming Timeline/Render Work Area, they were all gone? What purposes do they serve and what is the significance of Rendering? Thank you for your help!
I repeat the process and did a Rendering before making the DVD also. It did not help!
Andy Lim

Steve,
Long time no talk! You used to help me out many times when the PE-1 through PE-3 came out. I was HOPING you would still be around and you are! You came through again this time! Many thanks to you.
I use the Add DVD Scene button to insert the Markers. They are Green. Made a DVD and the markers work OK although ythey are "effective" during play back using the editing window.
While that problem was solved, will you come back and answer the other two questions concerning Rendering and the Red/Yellow lines? I would appreciate it very much!
Andy Lim
~~~~~~~~~~~~~~~~

Hi, I need help with scrolling

Hello I am Kevin Jin, I am working a huge project acually not that big, but I need help with five things, i mihgt have more things in my mind but here it is
1. I need help with scrolling like where you have buttons for example or press on a navigation bar tab, then it goes to that specific pace of the page, for a one page website, for example some sites you press on contacts and gose down to the bottom of the page where the contacts place is located, not opening a new link.
2.Second also I need help with navigation bar, where it fallows the scroll as it gose down, like for example when it is html the object is fixed to the top, and when you scroll down it will fallow it it,
3.I need Parallex scrolling where you can have the timeline or animations run while you scroll in the meantime and have animation running all the time, for example the infographic site where the bees are fluying but still have seperate animations while you scroll
4.I am so sorry i have two more to go, i appreciate your help, I would also like to ask if like looping each animations sperately, not looping the whole timeline, can it be possible to loop an animation while you have all the interactivity witht he site like looping seperately all the time, without interfeering with all the other animation
5.I also are wondering if you can create multiple pages on one animate project, like multiple pages with html
I just moved on to edge animate from html, and html was also beirf learn for me and mostly i was doing design work, and i thought getting out of graphic river and moving on the theme forest would be a better idea for me, thank you guys so much of the help and add me on skype : kevin2019170 or add me on facebook ; [email protected] or graphicriver, www.graphicriver.net/user/phantomore I would appriciate if you just would like contact me through SNS since I have that in hany 24 hours long, but the thred will also do, thank you doo much foryour help,
P.S, I want also all the five things to work on one aimate project not interfeering with other ideas liek all five questions i had should run on one site,
THANK YOU SO MUCH FOR YOUR HELP AND I APPRICIATE YOUR HELP!

1.
write this code in your button Click
$('html,body').animate({scrollTop: sym.$("Your Symbole Name Here").offset().top}, "slow"); // scroll to the top of that symbol name
Or :
$('html,body').animate({"scrollTop":"600px"}, 750); // Higher value means slower , scroll to top page
1 and 2 see this post http://forums.adobe.com/message/5531344#5531344
3 use edge commons plugin http://www.edgedocks.com/edgecommons
4.just put the animations behind eachother so when 1 is done, start with the animating the other symbol/div
5. i thin its best just to make for every page a new project or make the site in muse.

Need help with BARS 4.0.12 - 4.0.13 upgrade

Similar Messages

Maybe you are looking for