No Audio When using Video Out to Firewire

I do not get any audio when I use Firewire ntsc as my video out. When I set video out to canvas playback then I get audio. I want to use print to video but I cannot because the audio will not work with Firewire. I get the image on my external monitor but not the audio. I checked to make sure and the audio was not on the recorded dvd. I cannot not use print to video with canvas playback.
My Easy Setup is Format: NTSC, Use DV NTSC DV Converter. I tried using Firewire basic and got the same results.
Please Help
Ken

The audio does not play at all from the timeline if video out is set to Firewire. To answer your question, no the audio does not play in the external monitor when playing back from the timeline when Canvas is used as the video out. However, I don't believe the converter box is the problem. The audio would play in the internal speakers when using firewire as video out but it does not.
Is there a problem with FCE 4?

Similar Messages

  • Stereo audio when using video camera?  Any way to do this?

    Is there any way to record in stereo (2 mics) when recording video with the onboard camera? Can the 30-pin connector receive a stereo signal when videoing?  (iPad3, iOS 7)

    I figured it out myself so thought I'd share this for anyone else who wants to record video with the audio portion in stereo, you can do this using Sonoma Wireworks' GuitarJack2 in conjunction with a mixer.  Keep in mind this isn't a portable solution at all but the resulting audio is excellent, especially in headphones so this is great for doing a video of yourself singing and playing guitar (for example) and you want to capture a good stereo audio signal.  Basically, the way is works is you plug your two mics (we're talking recording style microphones with the XLR connectors) into your mixer of choice.  You then run a line out of the mixer into the 1/8" audio input jack of the GuitarJack 2 (it's a stereo line-in) and the 30-pin connector goes into your iPhone/iPad.  There are a couple of settings you have to make with the software for the GuitarJack but once you've done that, you can then make some videos with terrific stereo sound.  You monitor the audio via the headphone jack of your mixer.  If anyone knows an easier way to do the same thing, please let me know but this is the only way I've found. 

  • Blurry Text When Using Video out With FX 5900U

    I just got a MSI Geforce FX5900Ultra VTD256, and i was trying to play games on my TV.  I used the S-Video to video (the yellow Cable) adapter and when im in the desktop, all the text is real blurry, i cant even read it.  I tried lowering the resolution to see if that would make it easyer to read, but it didnt work.  Can someone please help.  Maybe the is somthing wronge with me TV???

    Hi,
    TV sets have lower resolution and bandwidth than PC monitors - the two are sort of related, but are not quite the same thing.
    Resolution is often measured in "lines", meaning the number of individual vertical lines that could be displayed across the width of the TV and still be distinguishable as individual lines. A figure of 800 lines was considered pretty good, and could usually only be achieved in a TV studio, from a camera direct to a monitor. So 800 pixels is about as much as a TV (especially a smaller one) can reasonably display. (The vertical resolution depends on the TV standard, and is about 600 lines or pixels for PAL, and about 500 for NTSC)
    The other factor is Bandwidth, which is measured in Megahertz (MHz). Basically, the finer the (horizontal) detail, the more bandwidth you need in the path between the source and the picture tube to display it faithfully. Broadcast TV is deliberately limited to about 5MHz, whereas a computer monitor will have several tens of MHz of bandwidth.
    Also, the chrominance (colour) component of a composite or S-Video signal is limited to less than 2 MHz, so fine colour detail will be worse off (Black on white or vice-versa will give best results).
    Anyway, the practical outcome of all this is that the highest resolution you can use for TV out is 800x600, and even then you need to use larger fonts (so the vertical lines are thicker, and there are a reasonable number of horizontal lines in a character).  The maximum number of characters per line should be less than 60-80.
    There are some scan-converters available which use fancy techniques to render a reasonable image at higher resolutions, but they are fairly expensive.
    S-Video should give better results than composite, but you will still be up against bandwidth and resolution limits
    Cheers

  • How can i detach the video from a clip so i can only use the audio when using imovie?

    how can i detach the video from a clip so i can only use the audio when using imovie?

    First, go to iMovie/Preferences and enable the Advanced Tools.
    Import the video clip into an iMovie Event. When you get ready to use it in an iMovie Project, select the clip in the Event and drag & drop it on top of a video or photo clip in the project at the place where you want it to begin. When the pop-up menu appears, choose Audio Only.

  • Iphone 5S IOS8 - quality of  audio when taking video?

    The biggest disappointment with the 5S was the TERRIBLY distorted audio when taking videos of live music or loud events.  The 4S didn't feature the front mic and therefor sound was passing by perpendicular to the mic and it would not be as "hot" of a signal.
    I have not one but two external mice I use when I plan*** on taking video but living in a city with tons of music I am not always prepared with an external mic.  Taking video with IOS7 with the 5S is useless if the audio source is above 85db or so. 
    Can anyone who has upgraded IOS on the 5S confirm that they have corrected the software for the mic sensitivity for a 5S?  My buddy has the 6 and his live videos of music do NOT distort.
    Thanks!

    Hello AudioArchist,
    Does the issue of recording videos still not get any sounds? If so, take a look at the article below to troubleshoot the issue further. Now it may be hard to give the exact reason why that happened, but the article should assist with getting it fixed.
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    http://support.apple.com/en-us/HT203792
    Regards,
    -Norm G. 

  • HT201177 no audio when using a mini display port to HDMI cable to TV on my Macbook pro

    no audio when using a mini display port to HDMI cable to TV on my Macbook pro. can only see the video

    I keep saying this over and over, in the hope that people who do a search will find it.  Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there.  The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple.  They're expensive, but they work perfectly.
    My guess is that you bought a cheap MDP to HDMI cable, or have a defective one.  From my reading of these boards over the past few months, cheap cables have a high failure rate.  And the regular priced ones have only a slightly less of one.  Try a new one.  Make sure you do not damage the Thunderbolt port.

  • Using Video Out Distorts Desktop Icons

    When I use my video out, the icons on my desktop get moved around. I understand why this happens when the resolution changes to send video out, but why don't the icons restore back to their original locations once I disconnect the video out? Is there a way to prevent the icons moving or to get the computer to restore them automatically? It's such a pain that I avoid using video out even though I could get a lot of use out of it. Any suggestions short of removing all the icons from my desktop? Thanks.

    In Finder, View/Show View Options
    Is 'Snap to Grid' or 'Keep arranged by' checked ?

  • HT201335 I can only get audio when using airplay through sky go on my apple tv on iphone 4

    I cn only get audio when using airplay through sky go on my apple tv on iphone4. Any ideas?

    Sky go is an app that does not support video AirPlay, not all apps do.

  • Timed video out through firewire?

    Hey everyone,
    In Final Cut Pro 5, is there a way to set print to video on a timer? For example, print to video on Friday at 2PM.... Or simply, just play the entire video in the timeline at a specific time?
    I'm assuming not, so does anyone know of any program out there that can play Quicktime videos out through Firewire on some kind of timer system?
    I know this is an unusual request... and I can explain why exactly I want this if anybody wants me to, but it's kind of a long story =)
    Any suggestions would be great!
    Thanks,
    Dean.

    You can easily set up an Automator script to work with an iCal event...
    use the script for PLAY MOVIE instead of record new video that I used here:
    http://homepage.mac.com/captmench/QTAuto.swf
    The video was done in haste... and there are a few errors in it... but you'll get an idea of what to do.
    Good luck,
    CaptM

  • I have no audio when using chrome

    I have no audio when using chrome. I have audio when using Internet explorer and when playing from my pc. I have tried uninstalling chrome and flash player then reinstalling them. have tried FAQ on chromes site and Adobe's site. did not work.

    Hi Funkd, 
    The video / audio team is still hard at work trying to fix the audio problems introduced in 11.3.  Would you be willing to test a build of Flash Player that contains a few changes and additional debug logging functionality?  If so, please contact me directly at [email protected]
    Thanks,
    Chris

  • No audio when recording video iPhone 6 (4.7in)

    I just got my 6 and love it, but I have noticed that I have ZERO audio when recording video, but rather some feedback.
    I have tried rebooting and powering off/on. Nothing has worked.
    Any help would be very much appreciated. I hope my phone doesn't have an issue.
    Thanks,
    Geoff

    Nevermind, I had the back covered. Silly me to think it used the same microphone on the bottom of the phone..

  • No audio when using FaceTime on iPhone.

    No audio when using FaceTime on iPhone. The video works, but just static is heard during call. I have attempted multiple calls to another iphone and my mac. Should I send the phone in for repair?

    Hi Anne-Lill Holme,
    Thanks for visiting Apple Support Communities.
    If you are not being heard during FaceTime calls on your iPhone 6, I recommend starting with these troubleshooting tips:
    Restart your device.
    If using FaceTime over a Wi-Fi network, go to the steps to resolve Wi-Fi network issues.
    From:
    iOS: Troubleshooting FaceTime
    Next, I recommend testing your iPhone 6 microphone in other applications, such as Voice Memos. 
    If you cannot be heard on recordings in other apps, see this article for additional troubleshooting help:
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    Best Regards,
    Jeremy

  • How to sync/edit audio when using frame freeze or time remapping?

    how to sync/edit audio when using frame freeze or time remapping? in premiere pro cs6

    You need to give more information about what you want to happen to the audio when you freeze or time remap the associated video.
    Is it synch video?
    Is it music?
    Is it Voice?
    Generally .. you have to cut and design the audio around the video effect.

  • How do you turn off Flash audio when using captivate Nav bar?

    Hi Guys and Girls
    I have an imported flash file that plays an audio track,
    I have no problem turning the audio off, when the user uses
    the button within the flash file to go to the next slide in the
    captivate movie...
    on(release){
    stopAllSounds();
    _root.rdcmndNextSlide = 1;
    BUT if the user decides to use the navigation bar within the
    captivate movie it all goes pair shape.. The flash audio continues
    to play into the next slide. Anyone have a know how to solve this
    problem?
    How do you tell flash to stop playing the audio when using
    the captivate navigation bar?
    (The flash file is a flip book and the audio NEEDS to stay
    within the flash file)
    Cheers
    Aquil0

    Thank you! Thank you! Thank you! This totally solved my issue. I had a Captivate 4 movie using an embeded animation that had audio. It would play the audio again when the next slide appeared. I have to use Captivate 4, because my audience still uses Flash 7 (yikes). However, if you have Captivate 5 and are having this problem there is a widget that solves this issue: http://blogs.adobe.com/captivate/2010/11/animations-%E2%80%93-audio-sync-issue.html#commen t-3872
    Thanks!
    EliteEraser

  • When phone not muted, why isn't there any audio when using facetime?

    When phone not muted, why isn't there any audio when using facetime?

    What version of iMovie?
    What camera?

Maybe you are looking for

  • How to run/generate a payment in f110

    Guys help me!! I have created a parameter in TCODE F110(AUTOMATIC PAYMENT TRANSACTIONS: STATUS )  and I need to run/generate it. The only message I got was "payment run has been carried out". I need to come up with a message like this "posting orders

  • How can I get firefox to reconize my sky caddy

    I have been trying to sync my Golf Sky Caddy and firefox is blocking it. It states that it doesn't reconize it. How do I correct this issue?

  • A Programming problem with PXI 8461

      I use PXI-8461 CAN Card.   The subvi READ_AI's function is to aquire data,and save datas to database.   And Process.vi dynamicly calls READ_AI twice,and a Main.vi calls Process.vi for every step.   Every step lasts 10 seconds,and has 10 seconds int

  • Calling methods in controller from View.

    Hi Experts, Can any one let me know or point to the document which explains how to call a userdefined method in component controller from view. Thanks, James

  • Call to_char, to_number or to_date with nls_pars but without a format model

    Hi      Does somebody know if there is a way to call to_char, to_number or to_date functions defining nlsparam argument and without defining the format model arument, in order to use implicit conversions. Thanks Bye Alessandro