OBIEE 11g Dashboard page load performance issue

Hi All,
One of my dashboard is taking for 5 to 15 min to load,Once the dashboard is displayed reports are coming fast. Dashboard has 5 pages.
Eg:
When I click on Dashboard -> XXXX Dashboard. It took 5 to 15 min to display the dashboard page. Reports are coming fast once the page is loaded.
Please help me on this.
Regards,
Hari

Cool,
Thank you for sharing the opinions of you.
My English i'snt so good. May not have expressed myself correctly.
In response to my post, I said that "OTHER" point which should also be evaluated is the environment you are using. not that this point is paramount.
Since the OBIEE is generated queries, the evaluation of queries generated and sent the data sources for sure should be evaluated.
thank you guys

Similar Messages

Link to OBIEE 11g Dashboard Page from a 10g Dashboard Page

Hi all,
Is it possible to place a Link object on a dashboard page (within OBIEE 10g) and have that navigate to an OBIEE 11g dashboard page?
If so, how is that implemented?
Our 11g and 10g environments are on different servers.
For business reasons (and budgets) we are not migrating our entire 10g environment to 11g just yet.
Thanks.

You can use Go URL as long as they are on same network domain [Go URL|http://docs.oracle.com/cd/E21043_01/bi.1111/e16364/apiwebintegrate.htm#i1005050]
http://sureshotstrategies.wordpress.com/2008/12/13/integrating-oracle-obiee-content-using-go-url-syntax-2/
http://www.iwarelogic.com/2010/09/integrating-oracle-obiee-content-using-go-url-850/
Hope this helps.
SVS

Re: OBIEE 11g Dashboard Page Prompt

Hi all,
We have a Dashboard page in that multiple reports is there and one Region prompt is there with the scope of page level ,
once i gave the filter with that prompt every report is filtered based on that prompt values .
but in that reports for a particular report we were already drill down based on hierarchy and the remaining all reports are in highest level , now we were applies the filter through the prompt the remaining reports are filtered based on prompt value except that report which is in already drill down mode .
Can any body help me out , is it a tool limitation/ i have to do any changes.
Thanks,
Ravi

Hi,
The report will react to a prompt only if there is a is promt column in that report. Check if there a is prompt filtered column in the report and remove it.
If you think that column is to be filtered as Is prompted and should not react to the dashboard prompt, then need to check...
Thanks

Character blinking/flickering/flashing on obiee 11g dashboard page

Hi all,
I have a dashboard with one page/tab where we have taken one text item with below html script. My business requirement is to make a particular word or a text to be blinking or flashing whatever. I have used below options to achieve
1. text-decoration:blink;
2. <blink>my text<\blink> ----this is not supported by IE & mozilla browsers.
but the above options did not work, is there any work around to achieve this. Any pointer would be appreciated.

<style>
.gcr_link, .gcr_link:visited {
font-size: 14px;
font-weight: bold;
font-family: Arial;
color: #660000;
</style>
<div style="text-align:center;margin-top:25px;">
<table border="0" cellpadding="15" cellspacing="1" bgcolor="#cccccc">
<tr>
<td bgcolor="#ffffff" width="100" align="left" valign="center"><img src="/analytics/res/sk_blafp/b_mozilla_4/gcr/1.png" /></td>
<td bgcolor="#ffffff" width="400" align="left" valign="center">
<p><a class="gcr_link" href="/analytics/saw.dll?Dashboard&PortalPath=%2fshared%2fSector%2f_portal%2fCredit%20Portfolio%20(Sector)&Page=01%20Sector%20Overview">Credit Portfolio (Sector)</a></p>
<font color="#660000"><b>Please note that between working day 3 and 16, R&A data is subject to adjustment.</b></font>
<p>Sector management identifies the shape we want our portfolio to take in rebuilding standalone strength. Whilst each individual transaction will be considered on its merits, we have highlighted our appetite for each sector into three categories.</p>
<p>The reports here show sector appetite limit management, cluster summaries, Divisional positions, trends and RWA against average PD.</p>
</td>
</tr>
</table>

Thanks & Regards

Hi paul & venkat thanks for you inputs, finaly we have used below javascript to achieve it.
<head>
<script type="text/javascript">

</script>
</head>
<body>
<font color="#FF0000"><b><blink> MY TEXT GOES HERE.</blink></b></font>

OBIEE 11g: Dashboard not invoking simple javascript alert

Hi Experts,
I'm trying to invoke one simple ALERT command with javascript in obiee 11g dashboard. The purpose is when it loads, it should print one ALERT message and also when we change something in the prompt and clicking Apply button.
Here is code written in a text item (Checked html markup option) after prompts;
<script language="Javascript">
alert ("Hello");
</script>
The Javascript alert message is showing when the dashboard page loads, but its not coming when we click the Apply button after changing the prompts.
Can anyone give helpful hint, how to check it and why its not showing up when we press Apply button?
Any hint or some useful links will b highly appreciated.
Thanks in advance.

You just used code and I would say the default event is onload of the page, thats the reason you are able to see alert.
Since you didnt ask or written code onClick event to show alert, its not showing.
You need to tell to browser when to prompt alert message instead of onload.
Hope you are more confuse about 'how to do'
if yes, mark :)
give some more info about your actual req. that helps any other gurus to help.
Edited by: Srini VEERAVALLI on Mar 27, 2013 8:42 AM

Oracle Portal page load performance

We have implemented Oracle Portal - Our HOme Page takes a long time to load. Can anyone suggest ways to improve the page load performance for portal

- please look at the application log and apache logs. do you see any indicators there? are you getting any errors too (timeout errors, etc) along with slow speed?
- performance depends upon a variety of factors. please tell us about your system, version, number of servers and the number of users and size of db.
- please be a little more descriptive in your questions to get a reasonable answer. that's usually a sign of an Administrator who should be dealing these issues, instead of an amateur developer for whom it shouldnt be a concern.
regards,
AMN

OBIEE 11g Dashboard Prompt Reset Button Functionality

Dear Experts,
Can anyone explain what is the exact functionality of 'Reset' Button in any OBIEE 11g Dashboard Prompt.
If anyone found any documentation related to it... please let me know.
thanks,
Varun

Hi Varun,
This is the functionality of Reset button,
Reset will go back to last applied values. It does not clear values. Currently the Reset button works in the following ways:
if 1) the prompt is blank 2) select some value, 3) reset 4) it should go back to blank.
if 1) the prompt is blank 2) select some value, 3) apply 4) reset. 5) it should NOT to back to blank. actually it does not change anything.
if 1) the prompt is blank 2) select some value, 3) apply 4) change any values 5) reset. 6) it should undo any changes in step 4.
Rgds,
Dpka

Loading performance issues

HI gurus
please can u help in loading issues.i am extracting data from standard extractor in purchasing for 3 lakhs record it is taking 18 hrs..can u please suuguest me loading performance issues .
-KP

Hi,
Loading Performance:
a) Always load and activate the master data before you load the transaction data so that the SIDs don't have to be created at the loading of the transaction data.
b) Have the optimum packet size. If you have too small a packet size, the system writes messages to the monitor and those entries keep increasing over time and cause slow down. Try different packet sizes to arrive at the optimum number.
c) Fine tune your data model. Make use of the line item dimension where possible.
d) Make use of the load parallelization as much as you can.
e) Check your CMOD code. If you have direct reads, change them to read all the data into internal table first and then do a binary search.
f) Check code in your start routine, transfer rules and update rules. If you have BW Statistics cubes turned on, you can find out where most of the CPU time is spent and concentrate on that area first.
g) Work with the basis folks and make sure the database parameters are optimized. If you search on OSS based on the database you are using, it provides recommendations.
h) Set up your loads processes appropriately. Don't load all the data all the time unless you have to. (e.g) If your functionals say the historical fiscal years are not changed, then load only current FY and onwards.
i) Set up your jobs to run when there is not much activity. If the system resources are already strained, your processes will have to wait for resources.
j) For the initial loads only, always buffer the number ranges for SIDs and DIM ids
Hareesh

View maps on OBIEE 11g Dashboard

Hi All,
My Installation: I have OBIEE 11g installed on Windows Server 2008. My Database is SQL Server 2012.
My Requirement: Display maps in OBIEE Dashboard.
Firstly, from the various posts available online, I have understood that the OBIEE 11g MapViewer works ONLY with Oracle database. If this is true then I need another way to view maps because I don't have Oracle DB.
Can I have Google maps on my OBIEE dashboard ?
Any suggestions/advice will be highly appreciated.
Thanks n Regards
Dev
Edited by: Devpriyo on Mar 25, 2013 3:45 PM

Hi Dev
Did you find the resolution.Even I am facing the same issue.It would be great if u have found the solution.
Regards
Kishore

OBIEE 11g Dashboard Customizations

Hi All,
I have this question which I need to be able to resolve in a short window. I have deployed a new skin for the OBIEE Dashboard and everything is working fine apart from the color or the Dashboard Page name being messed up.
Please refer attached link for a screen-shot of the issue.
https://plus.google.com/u/0/photos/114302734370650365790/albums/5966634315151450721
Thank you in advance

User, please post your question in the right forum. This forum Community Feedback and Suggestions (Do Not Post Product-Related Questions Here)
is not for product related question as the name tells you.
Try Business Intelligence Suite Enterprise Edition
Timo

QUERY PERFORMANCE AND DATA LOADING PERFORMANCE ISSUES

WHAT ARE QUERY PERFORMANCE ISSUES WE NEED TO TAKE CARE PLEASE EXPLAIN AND LET ME KNOW T CODES...PLZ URGENT
WHAT ARE DATALOADING PERFORMANCE ISSUES WE NEED TO TAKE CARE PLEASE EXPLAIN AND LET ME KNOW T CODES PLZ URGENT
WILL REWARD FULL POINT S
REGARDS
GURU

BW Back end
Some Tips -
1)Identify long-running extraction processes on the source system. Extraction processes are performed by several extraction jobs running on the source system. The run-time of these jobs affects the performance. Use transaction code SM37 Background Processing Job Management to analyze the run-times of these jobs. If the run-time of data collection jobs lasts for several hours, schedule these jobs to run more frequently. This way, less data is written into update tables for each run and extraction performance increases.
2)Identify high run-times for ABAP code, especially for user exits. The quality of any custom ABAP programs used in data extraction affects the extraction performance. Use transaction code SE30 ABAP/4 Run-time Analysis and then run the analysis for the transaction code RSA3 Extractor Checker. The system then records the activities of the extraction program so you can review them to identify time-consuming activities. Eliminate those long-running activities or substitute them with alternative program logic.
3)Identify expensive SQL statements. If database run-time is high for extraction jobs, use transaction code ST05 Performance Trace. On this screen, select ALEREMOTE user and then select SQL trace to record the SQL statements. Identify the time-consuming sections from the results. If the data-selection times are high on a particular SQL statement, index the DataSource tables to increase the performance of selection (see no. 6 below). While using ST05, make sure that no other extraction job is running with ALEREMOTE user.
4)Balance loads by distributing processes onto different servers if possible. If your site uses more than one BW application server, distribute the extraction processes to different servers using transaction code SM59 Maintain RFC Destination. Load balancing is possible only if the extraction program allows the option
5)Set optimum parameters for data-packet size. Packet size affects the number of data requests to the database. Set the data-packet size to optimum values for an efficient data-extraction mechanism. To find the optimum value, start with a packet size in the range of 50,000 to 100,000 and gradually increase it. At some point, you will reach the threshold at which increasing packet size further does not provide any performance increase. To set the packet size, use transaction code SBIW BW IMG Menu on the source system. To set the data load parameters for flat-file uploads, use transaction code RSCUSTV6 in BW.
6)Build indexes on DataSource tables based on selection criteria. Indexing DataSource tables improves the extraction performance, because it reduces the read times of those tables.
7)Execute collection jobs in parallel. Like the Business Content extractors, generic extractors have a number of collection jobs to retrieve relevant data from DataSource tables. Scheduling these collection jobs to run in parallel reduces the total extraction time, and they can be scheduled via transaction code SM37 in the source system.
8). Break up your data selections for InfoPackages and schedule the portions to run in parallel. This parallel upload mechanism sends different portions of the data to BW at the same time, and as a result the total upload time is reduced. You can schedule InfoPackages in the Administrator Workbench.
You can upload data from a data target (InfoCube and ODS) to another data target within the BW system. While uploading, you can schedule more than one InfoPackage with different selection options in each one. For example, fiscal year or fiscal year period can be used as selection options. Avoid using parallel uploads for high volumes of data if hardware resources are constrained. Each InfoPacket uses one background process (if scheduled to run in the background) or dialog process (if scheduled to run online) of the application server, and too many processes could overwhelm a slow server.
9). Building secondary indexes on the tables for the selection fields optimizes these tables for reading, reducing extraction time. If your selection fields are not key fields on the table, primary indexes are not much of a help when accessing data. In this case it is better to create secondary indexes with selection fields on the associated table using ABAP Dictionary to improve better selection performance.
10)Analyze upload times to the PSA and identify long-running uploads. When you extract the data using PSA method, data is written into PSA tables in the BW system. If your data is on the order of tens of millions, consider partitioning these PSA tables for better performance, but pay attention to the partition sizes. Partitioning PSA tables improves data-load performance because it's faster to insert data into smaller database tables. Partitioning also provides increased performance for maintenance of PSA tables for example, you can delete a portion of data faster. You can set the size of each partition in the PSA parameters screen, in transaction code SPRO or RSCUSTV6, so that BW creates a new partition automatically when a threshold value is reached.
11)Debug any routines in the transfer and update rules and eliminate single selects from the routines. Using single selects in custom ABAP routines for selecting data from database tables reduces performance considerably. It is better to use buffers and array operations. When you use buffers or array operations, the system reads data from the database tables and stores it in the memory for manipulation, improving performance. If you do not use buffers or array operations, the whole reading process is performed on the database with many table accesses, and performance deteriorates. Also, extensive use of library transformations in the ABAP code reduces performance; since these transformations are not compiled in advance, they are carried out during run-time.
12)Before uploading a high volume of transaction data into InfoCubes, activate the number-range buffer for dimension IDs. The number-range buffer is a parameter that identifies the number of sequential dimension IDs stored in the memory. If you increase the number range before high-volume data upload, you reduce the number of reads from the dimension tables and hence increase the upload performance. Do not forget to set the number-range values back to their original values after the upload. Use transaction code SNRO to maintain the number range buffer values for InfoCubes.
13)Drop the indexes before uploading high-volume data into InfoCubes. Regenerate them after the upload. Indexes on InfoCubes are optimized for reading data from the InfoCubes. If the indexes exist during the upload, BW reads the indexes and tries to insert the records according to the indexes, resulting in poor upload performance. You can automate the dropping and regeneration of the indexes through InfoPackage scheduling. You can drop indexes in the Manage InfoCube screen in the Administrator Workbench.
14)IDoc (intermediate document) archiving improves the extraction and loading performance and can be applied on both BW and R/3 systems. In addition to IDoc archiving, data archiving is available for InfoCubes and ODS objects.
Hope it Helps
Chetan
@CP..

OBIEE 11g Dashboard dropdown

Hi,
In OBIEE 11g the dashboards are located in a dropdown box (to choose from), not so nice - I think. Is it possible to change this appearance so it looks like in OBIEE 10g? Hopefully a setting somewhere.........

Hi,
I too have the same need, I think the 10g dashboard layout is easier to work with.
Thanks
Hicham

Poor Data Load Performance Issue - BP Default Addr (0BP_DEF_ADDR_ATTR)

Hello Experts:
We are having a significant performance issue with the Business Partner Default Address extractor (0BP_DEF_ADDRESS_ATTR). Our extract is exceeding 20 hours for about 2 million BP records. This was loading the data from R/3 to BI -- Full Load to PSA only.
We are currently on BI 3.5 with a PI_BASIS level of SAPKIPYJ7E on the R/3 system.
We have applied the following notes from later support packs in hopes of resolving the problem, as well as doubling our data packet MAXSIZE. Both changes did have a positive affect on the data load, but not enough to get the extract in an acceptable time.
These are the notes we have applied:
From Support Pack SAPKIPYJ7F
Note 1107061     0BP_DEF_ADDRESS_ATTR delivers incorrect Address validities
Note 1121137     0BP_DEF_ADDRESS_ATTR Returns less records - Extraction RSA3
From Support Pack SAPKIPYJ7H
Note 1129755     0BP_DEF_ADDRESS_ATTR Performance Problems
Note 1156467     BUPTDTRANSMIT not Updating Delta queue for Address Changes
And the correction noted in:
SAP Note 1146037 - 0BP_DEF_ADDRESS_ATTR Performance Problems
We have also executed re-orgs on the ADRC and BUT0* tables and verified the appropriate indexes are in place. However, the data load is still taking many hours. My expectations were that the 2M BP address records would load in an hour or less; seems reasonable to me.
If anyone has additional ideas, I would much appreciate it.
Thanks.
Brian

Hello Experts:
We are having a significant performance issue with the Business Partner Default Address extractor (0BP_DEF_ADDRESS_ATTR). Our extract is exceeding 20 hours for about 2 million BP records. This was loading the data from R/3 to BI -- Full Load to PSA only.
We are currently on BI 3.5 with a PI_BASIS level of SAPKIPYJ7E on the R/3 system.
We have applied the following notes from later support packs in hopes of resolving the problem, as well as doubling our data packet MAXSIZE. Both changes did have a positive affect on the data load, but not enough to get the extract in an acceptable time.
These are the notes we have applied:
From Support Pack SAPKIPYJ7F
Note 1107061     0BP_DEF_ADDRESS_ATTR delivers incorrect Address validities
Note 1121137     0BP_DEF_ADDRESS_ATTR Returns less records - Extraction RSA3
From Support Pack SAPKIPYJ7H
Note 1129755     0BP_DEF_ADDRESS_ATTR Performance Problems
Note 1156467     BUPTDTRANSMIT not Updating Delta queue for Address Changes
And the correction noted in:
SAP Note 1146037 - 0BP_DEF_ADDRESS_ATTR Performance Problems
We have also executed re-orgs on the ADRC and BUT0* tables and verified the appropriate indexes are in place. However, the data load is still taking many hours. My expectations were that the 2M BP address records would load in an hour or less; seems reasonable to me.
If anyone has additional ideas, I would much appreciate it.
Thanks.
Brian

Report Links in OBIEE 11g Dashboard not displayed correctly

In the Dashboard pages the Report Links for Export are not displayed correctly .
Instead of showing the multiple options for export/download it shows just text.

It can be done by doing below steps.
1) before doing this take a backup of instanconfig.xml file and do the below changes...
You can configure various options that change the way that right-click interactions are handled in views for an analysis at runtime. The elements in the instanceconfig.xml file specify the default settings for a new or upgraded analysis. You can edit the properties of an analysis in Presentation Services to modify how the analysis handles right-click interactions in views.
Before you begin this procedure, ensure that you are familiar with the information in Section 3.4, "Using a Text Editor to Update Configuration Settings."
To manually configure for interactions in views:
2) C:\Oracle\Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1\instanceconfig.xml
Open the instanceconfig.xml file for editing,
3)
Locate the sections in which you must add the elements
Include the elements and their ancestor elements as appropriate, as shown in the following example:
<ServerInstance>
<Analysis>
<InteractionProperties>
<InteractionPropertyAddRemoveValues>false</InteractionPropertyAddRemoveValues>
<InteractionPropertyCalcItemOperations>false</InteractionPropertyCalcItemOperations>
<InteractionPropertyDrill>false</InteractionPropertyDrill>
<InteractionPropertyGroupOperations>false</InteractionPropertyGroupOperations>
<InteractionPropertyInclExclColumns>false</InteractionPropertyInclExclColumns>
<InteractionPropertyMoveColumns>false</InteractionPropertyMoveColumns>
<InteractionPropertyRunningSum>false</InteractionPropertyRunningSum>
<InteractionPropertyShowHideSubTotal>false</InteractionPropertyShowHideSubTotal>
<InteractionPropertySortColumns>false</InteractionPropertySortColumns>
</InteractionProperties>
</Analysis>
</ServerInstance>
4) Save your changes and close the file.
5)
Restart Oracle Business Intelligence.
Mark as correct if it is helpful :)
Thanks.

OBIEE 11G DASHBOARD CREATION DIFFICULTIES

i HAVE BEEN TRYING TO SAVE MY ANALYSIS ON A SHARED FOLDER SO THAT I COULD PULL IT OUT TO CREATE ADDITIONAL DASHBOARD PAGES BUT THIS MESSAGE KEEPS POPING UP: CANT SAVE IN ROOT FOLDER. THIS MADE IT DIFFICULT FOR ME TO ADD CONTENT TO A NEW DASHBOARD PAGE. EVEN WHEN I SAVED ON MY FOLDER IT IS IMPOSSIBLE TO FIND IT. PLEASE CAN SOMEBODY FIND AN ANSWER FOR ME.

You just used code and I would say the default event is onload of the page, thats the reason you are able to see alert.
Since you didnt ask or written code onClick event to show alert, its not showing.
You need to tell to browser when to prompt alert message instead of onload.
Hope you are more confuse about 'how to do'
if yes, mark :)
give some more info about your actual req. that helps any other gurus to help.
Edited by: Srini VEERAVALLI on Mar 27, 2013 8:42 AM

OBIEE 11g Dashboard page load performance issue

Similar Messages

Maybe you are looking for