Problem attempting to create a purchase order via SRM Portal instance.

Unsing SRM7.0 with PPS; When attempting to create a purchase order via the "Create Purchase
Order" button in SRM Portal instance, after select ECPO type; the following message is show in the screen: "Object or set with GUID 00000000000000000000000000000000 does not exist".
Could you please advise what the problem might be and what to do.Thanks, responds would be very appreciated.Kind regards.
Edited by: ital230 on Jun 30, 2010 10:37 AM
Edited by: ital230 on Jun 30, 2010 11:05 AM

Solve!
The problem was the attributes specialy the BSA.
chekout the attribute should be at highest level and in the user not excluded (grayed).
Also
Define Backend System for Product Category: check that the system for category transfer should be from srm to backend:

Similar Messages

WebDynpro Error while creating a Purchase Order in SRM 7.0

Hello Friends,
I need help.
We are on SRM 7.0 with support pack 8.0 and we are getting the below error wile clicking on Shopping cart or Purchase Order link in Portal.
Any idea on how to resolve this error.
Thanks
Jyothi.
http://sapsrm.erpcx.com:8000/sap/bc/webdynpro/sapsrm/wda_l_fpm_oif/
ASSERTION_FAILED
The ASSERT condition was violated.
Method: ADD_EVENT_TO_QUEUE of program CL_FPM========================CP
Method: IF_FPM~RAISE_EVENT of program CL_FPM========================CP
Method: SET_CREATE_BUTTON_ACTIVE of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: IF_COMPONENTCONTROLLER~SET_CREATE_BUTTON_ACTIVE of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: RESET_SCREEN of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: IF_V_PRSEL~RESET_SCREEN of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: WDDOMODIFYVIEW of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/0FJM4718F184UKVHA34J==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP

Here is what I see:
Error analysis |
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"ASSERTION_FAILED" " "
"CL_FPM========================CP" or "CL_FPM========================CM004"
"ADD_EVENT_TO_QUEUE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
|

Automatically determine conditions when creating a purchase order via bapi

Hi Gurus,
I need some help...
I'm creating purchase orders with data of some sales orders. Tha data from sales orders is transfered to an alv grid... In this alv I need to display the values for the price scheme (as in ME21N when I put de material and vendor and press enter).
Thanks in adavnce,
LR

Dear Anna Shao
1 .Our SBO is version 2007B
2. The Decimal of Amount is 2 and that of Price is 6
3. Vat rate is 17%
4. The gross price is not small,the problem is that the difference is not small either.Sometimes it's bigger than 0.1 RMB.I can give you the example.
LineNo     ItemCode Quantity UnitPrice       VatRate      GrossPrice     LineTotal     GrossTotal
1            A     10         299.145299    J1(17%)      349.995299      2991.45      3499.95
2            A     10         299.150000    J1(17%)      350.000000      2991.45      3500.00
3            A     10         299.150000    J1(17%)      350.010000      2991.50      3500.10
If you set the unit price list for ItemCode 'A', you will get the result like row 1 above.
If you set the gross price list for ItemCode 'A' ,you will get the result like row 2 above.
If you do not set any price list for ItemCode 'A' and you just set the unit price 299.150000 in the purchase order,you will get the result like row 3 above.
The perfect one is row 2.It is just what our customer needs.So they set the gross price list for ItemCode 'A'. But another problem occured when using MRP order recommendation. It is the one why I post a thread,just as I have descripted at first
Edited by: Jianzhong Zhang on Feb 25, 2009 3:53 AM

Problem with services hierarchy and purchase order

Hi I'm in Srm 7 EHP8(classic scenario) and i have a problem with services hierarchies:
I create a Purchase requisition in ECC with the next structure:
1.Hier
1.1 Serv1
1.2 Serv2
1.3 Serv3
Then I upload this PR to SRM(I activated the BBP_EXTLOCALPO_BADI to change to the Extended-classic scenario to upload correctly the hierarchy)
and in the SOCO I only choose the position 1.1 Serv1 and create a purchase order.
The problem is the purchase order created in ECC contain all the services of the purchase requisition, not only the service I choose(1.1 Serv1) to create the purchase order, in SRM the purchase order is correct with only one position(1.1 Serv1)
Any Idea?.
Thanks for the help.

Hi,
I have the same problem, any new about that?
Rgs,
Pedro

Problem in sending purchase order via EDI

Hello Experts ,
I want to send purchase order via EDI , for this i have refer the below link for configurations.
link :
http://help.sap.com/saphelp_nw04/helpdata/EN/dc/6b7c9f43d711d1893e0000e8323c4f/content.htm
I have created purchase order (ME21N)and saved it.
Then i went to ME22N , Goto -> Messages, i am getting below error .....
Maintain outgoing EDI connection data for partner 8888(this is the partner number i have created in partner profile)
please suggest the possible cause of the error and how could i rectify it.
Thanks
Sonal

Ensure that you have the relevant message type in outbound parameters for this partner profile

Problem while creating Asser Purchase Order

Dear Xperts,
User has created one Purchase Order containing 2 line items.All the 2 line items are Asset with different Asset Codes. 1st one line item is having one Asset code & single account assignment & the 2nd line item is having 2 Asset codes with multiple account assignments.
Problem is that for the 1st line item accounting document has got generated but for the 2nd one no accounting doc has been generated for the same material document.When carefully checked the PO,have seen that GR Non valuated indicator is ticked for the 1st line item but not in the 2nd one.What could be the reason?
Regards,
Soumick

Hi,
Problem is that for the 1st line item accounting document has got generated but for the 2nd one no accounting doc has been generated for the same material document.When carefully checked the PO,have seen that GR Non valuated indicator is ticked for the 1st line item but not in the 2nd one.What could be the reason?
First basic thing ,If you have Gr-Non valuated indicator ticked then system will not generated any accounting document in MIGO and accounting document will generated at time of MIRO
moreover check following link also
[Fi Document is not generating in MIGO for multiple account assignment in PO;
Regards
Kailas Ugale

Automatic purchase order via MIGO

Hello,
I'm trying to do a GR via MIGO. The GR is supposed to create a Purchase Order. I enter the vendor account in "buisiness partner" tab but I keep getting error massage "please enter vendor" (M7 018).
I'm working on version 4.6c.
Has any one ancountered the same problem ?
Many thanks,
Sarit Babnik

Hi
you have to check all the setting befor you to MIGO
1.Material master in purchasing screen Auto PO checked
2.Purchase group should be same in
         Material master
         Vendor master
          info record
3. Vendor master purchasing screen should be checked with Auto PO
then do a MIGO with Mvt type 101. then it will give PO number once you post the document.

Error while creating a Purchase Order

Hi Friends,
I am new to SAP MM. I am getting a problem while creating a purchase order. I created Purchase Info Record, Source List, but while creating Purchase Order, price is not picking from the purchase order. I am getting an error i.e. Net Value must be greater than 0. I checked all the settings, but getting same error.
Could you please solve this

Hi,
Give some price at the item level for the item in the PO.
And check the Pricing procedure in PO
Hope it helps you.
Thanks.

Budget Exceed Error during creating of Purchase order in reference to PR

Hi,
I am getting the subject error (Budget Exceed Error) every time when I want to create a purchase order related to purchase requisition of my project.
Issue is that after release the project when the purchase requisition has created for non stock item under activity I found in transaction CJ31 the assign value has already updated.
Let say my budget is 400 US$, and the purchase requisition has created for 380 US$. Now when I check with CJ31I found the assigned value is 380. Now If I create a purchase order it throws an error that budget exceed.
The tolerance limits are following:
SA     ZSA01     Budget Profile Overall AVAC     ++     1     90,00
SA     ZSA01     Budget Profile Overall AVAC     ++     3     100,00
SA     ZSA01     Budget Profile Overall AVAC     01     1     90,00
SA     ZSA01     Budget Profile Overall AVAC     01     3     100,00
Please advice what will be the proposed solution for the above issue.
Thanks in advance.
With Regards,

Your budget is 400$ and PR value is 380$ but you have not mentiond what is the tax value ?
when u r creating PO at that time system will check the budget against PO value considering taxes also.
eg. 380$+tax value.
after considering taxes your total PO value imay be getting updated more that 400$.
Explre you error by clicking on error information you get the exact diffrence in budget and PO value.
Hope this will sove your problem, reply after doing this.

Get a wrong price when creating a Purchase Order in order recommendation

Dear all
    I meet a strange problem .I have already set a gross price list for Item 'A' . When I create a purchase order in Purchase Order Window,It will calculate a unit price (net price) according to the gross price list automatically .But when I create a purchase order in Order Recommendation Window,It will get a unit price as same as the gross price in predefined gross price list.They should not be equal in fact.

Dear Anna Shao
1 .Our SBO is version 2007B
2. The Decimal of Amount is 2 and that of Price is 6
3. Vat rate is 17%
4. The gross price is not small,the problem is that the difference is not small either.Sometimes it's bigger than 0.1 RMB.I can give you the example.
LineNo     ItemCode Quantity UnitPrice       VatRate      GrossPrice     LineTotal     GrossTotal
1            A     10         299.145299    J1(17%)      349.995299      2991.45      3499.95
2            A     10         299.150000    J1(17%)      350.000000      2991.45      3500.00
3            A     10         299.150000    J1(17%)      350.010000      2991.50      3500.10
If you set the unit price list for ItemCode 'A', you will get the result like row 1 above.
If you set the gross price list for ItemCode 'A' ,you will get the result like row 2 above.
If you do not set any price list for ItemCode 'A' and you just set the unit price 299.150000 in the purchase order,you will get the result like row 3 above.
The perfect one is row 2.It is just what our customer needs.So they set the gross price list for ItemCode 'A'. But another problem occured when using MRP order recommendation. It is the one why I post a thread,just as I have descripted at first
Edited by: Jianzhong Zhang on Feb 25, 2009 3:53 AM

DBIF_RSQL_INVALID_RSQL when creating a Purchase Order (ME21N)

Hi,
The system is generating a short dump DBIF_RSQL_INVALID_RSQL when a user tries to create a purchase order.
what could be the cause of this? i have analysed the short dump in st22 and looked at sm21 and st11 and they are giving very little detaill.
                                                                                Error in the module RSQL accessing the database interface.
What happened?
Error in ABAP application program.
The current ABAP program "SAPLZMM_GET_ACT" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
neither
caught nor passed along using a RAISING clause, in the procedure
"ZMM_GET_ACT_PLN" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The SQL statement generated from the SAP Open SQL Statement violates a
restriction imposed by the database system used in R/3.
Possible errors:
o The maximum size of an SQL statement has been exceeded.
o The statement contains too many input variables.
o The space needed for the input data exceeds the available memory.
o ...
You can usually find details in the system log (SM21) and in the
developer trace of the work process (ST11).
If an error occurs the developer trace often informs you about the
current restrictions.
How to correct the error
The exception must either be prevented, caught within the procedure
"ZMM_GET_ACT_PLN"
"(FUNCTION)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
The SAP Open SQL statement must be divided into several smaller units.
If the problem occurred due to the use of an excessively large table
in an IN itab construct, you can use the addition FOR ALL ENTRIES
instead.
When you use this addition, the statement is split into smaller units
according to the restrictions of the database system used.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_RSQL_INVALID_RSQL" CX_SY_OPEN_SQL_DBC
"SAPLZMM_GET_ACT" or "LZMM_GET_ACTU01"
"ZMM_GET_ACT_PLN"

Hi,
Wherever you have used SQL statement please do check all the fields here as some of the fields are not in correct order as they are required per the actual table in dictonary, to just verify that you can use addition of "INTO CORRESPONDING FIELDS OF INTERNALTABLE" in your SQL statement as this will not require the fields to be in order but this may cause performance issue.
Thanks and Regards
Sudharshan

Creating a Purchase Order using ORDERS05 Idoc

Hi Experts,
I need to create a purchase order using ORDERS05 Idoc, with the data I am using a sales order is gettig created but I need to create a PO insted of SO.
Please let me know what is difference between a PO and SO while using ORDERS05. Also please let me know what are all the fields that needs to chaged in the Idoc.
Thanks,
Suma

Hi,
   I'm looking at a similar problem, can we use ORDERS05 IDOC basic type to create a Purchase Order?
   What is the inbound processing FM? I tried IDOC_INPUT_ORDRSP, but it seem to only allow changes to a PO, and not creation of a PO.
   For IDOC_INPUT_ORDERS FM this one seem to only create Sales Orders?
   Which inbound FM should i be using?
Regards.

Creating a purchase order form that has a flowable layout" Help Tutorial

Regarding the "Creating a purchase order form that has a flowable layout" Help Tutorial, I can't seem to get the data to pull in for just the PO in question, is there a secret?
Ideally, it should create one form for each PO with the detail lines for each PO on the individual forms. Can we do this?
Many thanks!

Hi
If the smartform purchase order is not available in your system
means you can download the form IDES and you can upload the form in ur ecc 6.0 system.we faced a similar kind of problem in our system and we did as i said.
Once you uploaded the things you can easily view the form interface and rest of the things related to smartforms.
Thanks and Regards
Arun Joseph

Which Sales order created a purchase order?

Dear Experts,
What would be the table to look at to check which Sales order is used to create a type of purchase order?
I know the stock purchase order but not the sales order number that triggered an auto creation of this PO.
Pls advise. Thanks
regards
M Russo

Hello,
Ideally purchase order is linked to sales order in cross docking and third party sales scenario.
In both of above scenario's sales order is linked to purchase order via purchase requistion.
If you know the purchase order number, then you can find the respective sales order number in the account assignment tab in purchase order screen.
You need to open the purchae order with ME23N/ME22N and go to item detail and check the account assignment tab.
Here you will get the corresponding sales order number.
BR/
Tushar

Steps to create a purchase order in SAP r/3

Hi All,
    I need to create a purchase order in SAP R/3,I am very new to SAP R/3 just started using material managements module in R/3.Could any one please help me to know what all steps i need to take for creating a PO.Do i require some pre-requisite data in R/3?
Waiting for your reply!
Thanking you.
Regards,
Namrata.

Trigger
A purchase order needs to be created, and the vendor is known
Business Process Description Overview
A purchase order is a legal document issued by the buyer to the vendor to supply materials or service at the agreed price, terms and conditions. The Purchase Order forms the basis for all follow-on activities like Goods Receipt, Invoice Verification, etc. The Purchase Orders can be created directly by entering all the required data, copying already created purchase order, with reference to an RFQ/Contract or with reference to a PR.
Purchase Order creation is possible only if sufficient budget allocation is there for the Fund Centers. It is not possible to create Purchase Orders for a Vendor who is blocked for procurement or not maintained in source list for that item. Also it is not possible to create PO for Quantity more than the PR quantity.
All the price components which are to be paid to vendors and requires to be inventoried has to be included in PO.It is possible to add different vendors for delivery costs. The tax codes should be correctly maintained in PO for the purpose of Cenvat availment etc.
The payment term defaulted from Vendor Master or RFQ has to be verified and changed if required.
The incomplete Purchase Orders can be saved as HOLD document and later completed and saved thru Change PO menu
Input - Required Fields     Field Value/Comments
Vendor     Vendor number
Purchasing Organization     1000
Purchasing Group     Purchasing Group code
Date     Purchase order date
Account assignment category     Where costs will be allocated
Delivery Date     Anticipated Delivery Date
Plant     For which plant we are buying the material
Output - Results     Comments
Purchase order document     Can be changed, displayed or printed which can then be mailed to vendor
Tips and Tricks
The Purchase Orders can be created directly by entering all data required for creating PO or by copying another PO or with reference to RFQ/Contract/PR.To create a purchase order by copying existing document (PO/RFQ/PR), you can either select the desired document in the document overview   .and adopt it in the current purchase order in the right-hand area of the screen using the ADOPT button   .In addition you can drag it onto the shopping basket symbol   with the left-hand mouse button.
Click the Personal Settings button on the tool bar, this function is for default information for purchase order header data and also purchase order item data. This will reduce the amount of redundancy in the data entry, i.e. plant, company code.
One Purchase Order may be created for several purchase requisitions
Procedural Steps
1.1.     Access transaction by:
Via Menus     Logistics èMaterials ManagementèPurchasingèPurchase OrderèCreateèVendor/Supplying Plant Known.
Via Transaction Code     ME21N
1.2.     Double-click
On screen Create Purchase order
On screen select Domestic Purchase order in this screen . You can also select other document if you want to create other. Here drop down menu is available.
Click   to enter the organization data.
Screen will change in the header; enter data as given in the table below:
Field Name     R/O/C     Description
Purchasing Org.     R     Enter the purchasing organization code.
Example: 1000
Purch. Group     R     Enter the purchasing Group which is procuring the material
Example: P01
Company Code     R     Enter the company code under which above purchasing
Organization is.
Example: 1000
After entering the organization data enter the vendor or material supplier in the field    here drop down is available.click   to see the drop down.
Field Name     R/O/C     Description
Search term     O     Text that describes the vendor in more detail.
Example:     MICON
Vendor     O     Description of the vendor.
Example:     100008
Click   .
System displays all possible entries available as per data entered
Restrict value range (1)   1 Entries found
To select required Vendor Click   .
Click   .
Vendor selected
Now go to   ,here the system will pick up the data automatically from the vendor master but if you want to chane the data you can change the data. Here drop down menu is available.
Now go to   to mainatin the text.
After maintaining the text if you want to see or change the vendor address click   and do the amendments.
Now Go to   and click to enter the Items and other data as per the table given below:
Field Name     R/O/C     Description
Account Assignement     R     Key that identifies specific settlement receiver types such as cost centers, internal orders, work orders, asset accounts, or project WBS elements.Example: K
drop down menu is available here.
Item Cateogry     O     How the procurement of a material is controlled.
Drop down menu is available here.Example: Standard
Material     R     Here you will enter the material to be purchased from the
Vendor.
Here also drop down menu is available. Use the following
to select the material. Example ZROH-DEMO
In the figure above enter the search cretira for the material for example ZROH-DEMO and click
. The follwing result will appear on the screen select the line item and click   to select
the material.
Short Text     R     Enter here short description about the material,if the text is not
automatically picked up from the material master.
PO Quantity     R     Enter here quantity to be ordered.
Example 10
Order unit     R     Here we enter the order units of measurement.
Here also drop down menu is available.
Example : KG
Category of delivery date     O     Here you can enter deleviery date format.
Here also drop down menu is available.
Example : Day format
Delivery date     R     Enter the delivery date. You can use the calender provided by
the system.
Example : 28.02.2006
Net price     R     Enter the net price of the material here
Example : 1000 INR
Material group     R     Enter the material group to which that material belongs.Here
also drop down menu is available. This field is also automatic
picked up field.
Example : M10001
Plant     R     Enter the plant code for which you are purchasing the material
Here also drop down menu is available.
Example : 1100
Storage location     O     Here you will enter where the material is to be stored. Drop
Down menu is available here.
Example WH01
Click Enter and system will give you message
You will now see the screen
Field Name     R/O/C     Description
Cost Centre     R     The purchase is done for which purpose. Here also drop down
Menu is available.
Example: 11050 for CDU/VDU /SGU OP
G/L Account     R     G/L account from which payment will be done.
It will be automatically be picked up from the material group
You can change it also.
Unloading Point     O     Specifies the point at which the material is to be unloaded.
Recipient     O     Specifies the recipient for whom the material is destined.
Click   to see and to change the Tax Code at item level.
Select    to view the taxes applied on the line item.
click   to go back to the previous screen .
On the main screen in the same tab if you want to change the taxe select the tax code from the drop down available
After selection again, Select    to view the taxes applied on the line item.
If you want to add more conditions click   tab and enter the conditions from the drop down
You can also maintain the text at item level by clicking   tab.
After completeing this all click   to check wether here is any error in the purchase order , If there will not
                         ↓
any error then on the screen following line will appear.
If there will be some error the system will throw the message on the screen
select the line item and click   to see the detail of the error.
close this window now and goto main screen to rectify the error.
After rectifying the error again click   to check wether here is any error in the purchase order.
Now click   to save the purchase order, after clicking the button the following message will appear

Problem attempting to create a purchase order via SRM Portal instance.

Similar Messages

Maybe you are looking for