Problem with image path names

We have a website created in CF4.5 and is hosted on our own server, call it www.oldsite.com A vendor created a new website which is hosted at another location and it uses the same name and the DNS info was updated so this new site has the same name and now runs when our oldsite name is used.
The vendor created a new name - "legacy.oldsite.com" and pointed to our old IP address at our office and serverfor the origonal site. We have lots of customer support info on the old site and wanted customers to be able to find these docnuments. When we type "legacy.oldsite.com" we land on an index.cfm page one folder above the orogional index.cfm rathee rthan the old index.cfm page. I have added a tag to this page to go to the correct index.cfm page. But the problem now is that all the images on the site and the documents are missing or will not download. When I look at the path of these images and documents, some images start with Http://www.oldsite.com/etc" some are "http://legacy.oldsite.com/path" (In this case some folder name is missing in the path so it does not work). So it looks like the path is coded somewhere? I see no other way that the www.oldsite.com path could be read any other way. So does anyone have may ideas where I mightbe able to fix this issue and get the old site to load images and documents?
Thanks
TedT

I never used the compressed folder option nor I'm sure I really understand what this feature is.I can browse "into" an archive, open it like a folder (is this the "compressed folder" feature?). I extracted the sub folder via drag and drop. The extraction was very slow, but it finished. When I tried to delete the folder, there was an error message stating that the content could not be saved to the trash because of long file names.
I repeated the test and initially created that awful long path which WinRAR was using (pdt-2.0.0GA_debugger-5.2.15.v20081217-all-in-one-win32) and extracted the archives content into that folder. This time extraction stopped with error message "0x80010135: path too long".
All if seen so far seems to indicate that there's a max_path problem with Explorer (only x64 version?) and system parts based on it (like wastebasket), not only a problem with WinRAR.
Windows 7 x64 - Gigabyte EP-45-DS3 (Intel P45 chip set), 4GB RAM, ATI 4670

Similar Messages

Problem with long path names?

I tried to unpack the PHP eclipse package to a folder named like the ZIP package (pdt-2.0.0GA_debugger-5.2.15.v20081217-all-in-one-win32). WinRAR stopped with an error message (something like "file name to long"). I was unable to delete the folder until I shortened the directory name. Extracting worked only with a short path name.
Did anybody experience something like this?
Windows 7 x64 - Gigabyte EP-45-DS3 (Intel P45 chip set), 4GB RAM, ATI 4670

I never used the compressed folder option nor I'm sure I really understand what this feature is.I can browse "into" an archive, open it like a folder (is this the "compressed folder" feature?). I extracted the sub folder via drag and drop. The extraction was very slow, but it finished. When I tried to delete the folder, there was an error message stating that the content could not be saved to the trash because of long file names.
I repeated the test and initially created that awful long path which WinRAR was using (pdt-2.0.0GA_debugger-5.2.15.v20081217-all-in-one-win32) and extracted the archives content into that folder. This time extraction stopped with error message "0x80010135: path too long".
All if seen so far seems to indicate that there's a max_path problem with Explorer (only x64 version?) and system parts based on it (like wastebasket), not only a problem with WinRAR.
Windows 7 x64 - Gigabyte EP-45-DS3 (Intel P45 chip set), 4GB RAM, ATI 4670

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

Problem with file path in linux

hi,
i have problem with file path accessing in linux. my java class is accessing a abc.cvs file and and getting all data. it is working fine in windows xp. but i run this same file in linux it does not access the abc.cvs file and does not get any data.
my project structure
Search
abc.cvs
search.SearchMain
i am sccessing this cvs file in this SearchMain class by this way file name = "abc.cvs"
It is working fine with window but problem with linux.
when i place this abc.cvs in a folder as "./data/abc.cvs" also working fine with windows but not in linux.
I am new for linux.
Please give me solution.
Thanks in advance
Ravi

forgot to tell,
then you need to export that path
export $CLASSPATH
code}

Problem with Image.createImage()

Hi all!
I'm writing a simple midlet just to display an image on the screen and I'm having some problems with Image.createImage()
Here is my code
Image bg_img;
ImageItem imageItem1;
imageItem1 = new ImageItem("", null,ImageItem.LAYOUT_DEFAULT, "");
try{
bg_img = Image.createImage("/image.png");
imageItem1.setImage(bg_img);
catch(java.io.IOException e){
e.printStackTrace();
I'm getting an exception on bg_img = Image.createImage("/image.png");
I can't understand what is it...:(
I know for sure that the problem is not "file not found"
Any one can help me???

If you are catching IOException, then u may have problem with ur image path. "image not found on the specified path." if ur image is not in the current directiry then put it into current directory. otherwise, If u are using resouce folder and it is already included into the resouce path, then put ur image in that folder..try this..
Still not get, then please give some detail about ur development toolkit. and ur apllication packaging scheem. are you using ANT?
Pranav

Experiencing problem with image display in LR5

I have an intermittent problem with images displaying and exporting in LR. It just began a couple of months ago and is totally random - will do it with RAW (CR2) or JPG. It displays this way in all modules - Library, Develop, Slideshow....The image displays fine in a non-Adobe image viewer (Faststone or Windows Viewer). I've reloaded LR5 and PSCC and is still persists. I know the image file is fine. It also has begun effecting older images that were showing up just fine a while ago. I just loaded about 200 images and maybe 3 or so have this viewing problem in LR & PS. Has anyone else experienced it and have a suggested fix? My graphics card has the latest drivers and shows no problems with other applications. Here is the same image - one a jpg export from Lighroom, the other a save as jpg from Faststone. HELP!

This is almost always a hardware problem, causing corruption of the file. The difference you see between Lightroom and other software is that Lightroom is accessing the full RAW image, while the other software is trying to read the embedded JPG preview.
To figure out exactly what hardware is the problem, you need to try different transmission paths and hardware ... different camera cards, different card readers or USB cables/USB ports, different hard disks, etc. Eventually you should be able to isolate the problem.

Error message in time machine: "There was a problem with the user name or the password of the network

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

I have been unable to back up my macbook to my time capsule for some time now. I received the following error message (translated from Swedish) when trying to back up using time machine:
"The network's volume could not be placed on the desktop. There was a problem with the user name or the password for the network.
Open system preferences and go to Time Machine. Select the volume for security backup again and state the correct user name and password."
I have confirmed the network password, and also tried with resetting the password. I have not idea what else to do. Any help is much appreciated.
Best regards,
John

Problem with Connection Broker name

Hi,
When i change the connection broker name using for example:
Set-RDClientAccessName -ConnectionBroker serverbrokerName.domain.com -ClientAccessName NewBrokerName.domain.com
no.manchete.pt
And setup a DNS pointing to NewBrokerName.domain.com
When someone tries to connect it gives him the following error:
"Your computer cannot connect to the remote computer because the Connection Broker couldn't validate the settings specified in your RDP file. Contact your network administrator for assistance".
What am i doing wrong?
Sincerely,
AM

Hi,
When i change the connection broker name using for example:
Set-RDClientAccessName -ConnectionBroker serverbrokerName.domain.com -ClientAccessName NewBrokerName.domain.com
no.manchete.pt
And setup a DNS pointing to NewBrokerName.domain.com
When someone tries to connect it gives him the following error:
"Your computer cannot connect to the remote computer because the Connection Broker couldn't validate the settings specified in your RDP file. Contact your network administrator for assistance".
What am i doing wrong?
Sincerely,
AM
The services needed to be restarted, now im facing another problem with the new name:
error: "Remote Desktop can't connect to the remote computer "NewBrokerName.domain.com" for one of these reasons:
1) Your user account is not listed in the RD Gateway's permission list.
2) You might have specified the remote computer in NetBIOS format ( for example, computer1), but the RD Gateway"
EDIT: Also solved this error RD Gateway was only allowing connections to Domain Computers, change to all resources

Problem with images opened in Photoshop CS 5

Hi, I have a problem with images that I open in Photoshop CS 5. F. ex. I opened
the following image:
The image appears with a purple color in Photoshop. If I hover over the image
with a tool like lasso, it temporarily regains it´s original color. The image mode is RGB Color, 8 Bits/Channel.
I resetted the start settings of Photoshop with the CTRL-Shift-Alt-combination, which had no effect.

The confusion arises from the imprecise error message in the Preferences > Performance dialog box, to wit:
OK, that seems to be open to misunderstanding indeed.
The video card: Citrix Systems Inc. Display Driver.
Could not find a list for CS6 specifically, but the card may fall short.
http://helpx.adobe.com/photoshop/kb/tested-video-cards-photoshop-cs5.html
If I invoke View > Proof Colors, the only thing that changes is that the text in the brackets
Also if you set View > Proof Setup to something different?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Problem with image url

Hello,
today I have a problem with image url. I wanted Image to change when mouse dragged over it. But nothing happened. Any ideas?
def maxIco: ImageView = ImageView{
image: Image{
url: "{__DIR__}ikony/max.png"
onMouseDragged: function(event: MouseEvent){
maxIco.image = Image{
url: "{__DIR__}ikony/max2.png"
}

This is working for me:
src/main/Main.fx
src/main/icon/image1.bmp
src/main/icon/image2.bmp
//Main.fx
package main;
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.image.Image;
import javafx.scene.image.ImageView;
import javafx.scene.input.MouseEvent;
var changed = false;
def imgView: ImageView = ImageView {
    image: Image {
        url: "{__DIR__}icon/image1.bmp"
    onMouseDragged: function (e: MouseEvent): Void {
        if (not changed) {
            imgView.image = Image {
                url: "{__DIR__}icon/image2.bmp"
            changed = true;
            println(imgView.image.url);
    onMouseReleased: function (e: MouseEvent): Void {
        imgView.image = Image {
            url: "{__DIR__}icon/image1.bmp"
        changed = false;
        println(imgView.image.url);
Stage {
    title: "ImageTest"
    scene: Scene {
        width: 700
        height: 600
        content: [
            imgView
}I've changed few things to switch image only one time on mouseDragged event.
It print the image URL.

Having problem with change of name in the datagrid Coding

I am having problem with changing the name of the datagrid header text name for one of the data either in the flash file or the php file.
The thing is i want to change the Course_Name to Course Name that has no underscore so that it will look nicer in the datagrid but if I change it in the php file like SELECT Course_Name as 'Course Name' ....., it will not turn out in the datagrid when I CTRL ENTER the flash file but the others like Price,description and display is shown.
There is no problem with my php code but I do not know how to change the Course_Name into Course Name so please help me resolve this error that I am having.
This is my flash code
function goCourse(e : MouseEvent):void
gotoAndStop(5);
refreshResponder = new Responder (refreshSuccess, onFault);
connection = new NetConnection ();
connection.connect (gateway);
dataDG.addEventListener (Event.CHANGE, gridItemSelected);
refreshData (true);
function gridItemSelected (e: Event): void {
ID = e.target.selectedItem.ID;
courseTxt.text = e.target.selectedItem.Course_Name;
priceTxt.text = e.target.selectedItem.Price;
descTxt.text = e.target.selectedItem.Description;
private function getParams () {
var param: Object = new Object ();
param.ID = ID;
param.Course_Name = courseTxt.text;
param.Price = priceTxt.text;
param.Description = descTxt.text;
return param;
private function refreshData (refresh: Boolean): void {
if (refresh)
connection.call ("Course.viewCourse", refreshResponder);
private function refreshSuccess (result: Object): void {
dataDG.dataProvider = RecordSetDP.toDataProvider (result);
dataDG.columns = ["Course_Name","Price","Description","Display"];
private function onFault (fault: Object): void {
trace (String (fault.description));
This is my php file code.
function viewCourse()
$this->connect();
$sql = "SELECT Course_Name,Price,Description,Display
FROM coursetb";
return mysql_query($sql,$this->_connection);

i don't see where you're calling your php file in your code, but change 'Course Name' to 'Course_Name' (or vice-versa) there.

Problem with image gallery

Hi to all.
With ios 5.01 I have a little problem with image gallery. As you can see I have only 1 image, but there is always this **** message "download 0 of 46) (sorry, but I'm Italian )
I've removed my icloud account from settings, but there is nothing to do, this message don't goes away. What I can do? Thanks in advance

Hello,
Just adding a gallery I want to do the same slideshow WoodWing's, but in InDesign, if anyone knows of?
Thank you
Link video slideshow WoodWing's: http://www.youtube.com/watch?v=Xt6gNaEZ0-M&feature=relmfu
The first slideshow shown

Problems with image scaling

I'm facing a real problem with image scaling
I've used several algorithms but it all has defects but the most common thing is the out of memory error after several enlargments...
does any one know a solution...
note:
I've used several packages to do so,but I'm looking for a solution from the jdk itself
JAlexscorpio

Did you take into account that the getScaledInstance() -method creates a completly new Image?
So if you use it like in
ImageIcon icon1=new ImageIcon("Blah.gif");
ImageIcon icon2=new ImageIcon(icon1.getImage().getScaledInstance(400,400,SCALE_FAST);
you will end up with 2 different Images which have their own data and memory requirements.
even if you use something like
ImageIcon icon1=new ImageIcon("Blah.gif");
Image i=icon1.getImage();
icon1.setImage(i.getScaledInstance(200,200,SCALE_FAST));
You will need enough memory to store the data for the original image, as well as the data for the scaled
version of the image, at least for the time that it take the JRE to create the scaled version. You never know when the garbage collector kicks in to delete you old data so it could be that this takes some time and until
that moment your memory is not available. If your now doing several of the scaling operations, and there is no chance for the garbage collector to do its work, you will run out of memory.
I hope that might help, if not feel free to post again

Problems with Image Variants

I got two problems with Image Variants:
1. catalogCache.GetImagePath("Images", id) doesnt work for some id. The error message is GetImageVariant error.
2. catalogCache.Preload("Images", Original)
    catalogCache.Preload("Images", Thumbnails)
    catalogCache.Preload("Images", null)
   catalogCache.Preload("Images", "")
get failed, the status code is -2147483647
Anyone know how to setup image variants?
Thanks.
Forrest

status code: -2147483647 is RC_BADPARAM.

Copy and Paste Problems with Images

I'm having the strangest problems with images. I copy an image off of the web for one of my art history classes and I go to paste into another program but, whether it's Keynote, Powerpoint, Photoshop, or Graphic Converter, something always goes wrong: the images definitely lose some of their quality, become brighter in appearance, and get jagged on the edges. This is starting to drive me nuts, especially since it never happened in 10.4 on my iBook G4. Any suggestions?

Make it an 8-bit file (Image menu > mode).

Problem with image path names

Similar Messages

Maybe you are looking for