Problem with Starting Edit JTable after Enter Pressed

Hi.
Who knows what to do in such case:
I have JTable. When I press ENTER on Cell - the editing process must begin, like it happens when I make Double Click on Cell.

The KeyStroke to invoke editing on a cell is the "F2" key. So you want to map the Enter Action to be the same as the F2 Action.
This posting shows how to remap the Action for the Enter key:
http://forum.java.sun.com/thread.jspa?forumID=57&threadID=505866

Similar Messages

I have Problems with starting em dbconsole after a fresh Installation

I have been having problems running EM console on Oracle 10g R2 on windows xp after a fresh installation and I did not receive any error messages while the Installation was going on. I was able to log into sqlplus successfully and I started the instance and em dbconsole (which started up successfully, but still yet , after logging into em dbconsole the status of the instance is still not running?
I still tried further to startup the instance, after entering my host credentials and sysdba account, I get this error message;;
Error
java.lang.Exception: Exception in sending Request :: null
What could possibly be the reason for this situation?

Thanks 4 responding to my enquiries, accidentally I had already gotten a tip from someone who suggested that I should turn off the dbcontrol and leave the database and listener running, then recreate the enterprise manager repository using the "emca.bat" utility.
<emca.bat -config dbcontrol db -repos recreate>
Which I did after entering the values I got this error message;
Do you wish to continue? [yes(Y)/no(N)]: y
Jun 24, 2006 7:40:20 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\dcity\emca_2006-06-24_07-38-59-PM.log.
Jun 24, 2006 7:40:21 PM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Jun 24, 2006 7:40:22 PM oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
Jun 24, 2006 7:40:23 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Repository successfully dropped
Jun 24, 2006 7:40:23 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Jun 24, 2006 7:40:23 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Jun 24, 2006 7:40:23 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\dc
ity\emca_repos_create_<date>.log for more details.
Jun 24, 2006 7:40:23 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\dcity\em
ca_2006-06-24_07-38-59-PM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\dcity\emca_2006-06-24_07-38-59-PM.log for more details.
From the look of this, the repository could not be created? What is probably the next step to solve this problem?

Problem with starting IWS6.0 after installing PHP

I recently installed php40 with IWS60 running on sparc sol8. When
starting webserver from either command lines or admin panel, the server
failed to start with the following errors:
start failed. (2: unknown early startup error)
iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
failure: server exit: status 1 (Interrupted system call)
Error
An error occurred during startup.
The server https-dhcppc0 was not started.
Looking at error logs, these are the following errors:
info (18731): successful server startup
info (18731): iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
security (18731): Temporary directory /tmp (specified by the TempDir
magnus.conf directive) is not owned by the server user. This is a
potential security hole. Please change TempDir or remove the directory
and restart the server.
Ok - now I look at /tmp folder and its owned by sys and group sys. In
addition, I went in and look at magnus.conf file and there is a line of:
TempDir /tmp/https-dhcppc0-ab0d7966. I deleted (remaned to something
else) that file in /tmp folder but still getting the same errors.
Could someone help to tell me what going on with these errors which
prevented the server to start.
Thanks
Paul

The error is pretty explicit about wha tthe problem is.
Look at the /tmp/https-dhcppc0-ab0d7966 directory. What are it's
permissions? They should be 700 for the UID iWS runs as. Here's mine:
[foobar@www /tmp]$ ls -ld /tmp/https*
drwx------ 2 root root 1024 Sep 19 16:46 https-admserv
drwx------ 2 nobody nobody 1024 Sep 19 16:49 https-www
Super-User wrote:
>
I recently installed php40 with IWS60 running on sparc sol8. When
starting webserver from either command lines or admin panel, the server
failed to start with the following errors:
start failed. (2: unknown early startup error)
iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
failure: server exit: status 1 (Interrupted system call)
Error
An error occurred during startup.
The server https-dhcppc0 was not started.
Looking at error logs, these are the following errors:
info (18731): successful server startup
info (18731): iPlanet-WebServer-Enterprise/6.0 B05/18/2001 11:18
security (18731): Temporary directory /tmp (specified by the TempDir
magnus.conf directive) is not owned by the server user. This is a
potential security hole. Please change TempDir or remove the directory
and restart the server.
Ok - now I look at /tmp folder and its owned by sys and group sys. In
addition, I went in and look at magnus.conf file and there is a line of:
TempDir /tmp/https-dhcppc0-ab0d7966. I deleted (remaned to something
else) that file in /tmp folder but still getting the same errors.
Could someone help to tell me what going on with these errors which
prevented the server to start.
Thanks
Paul--
Joe McCabe ... bleakness ... desolation ... plastic forks ...
House O' Mozilla

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

Problem with starting Photoshop CS6 in Windows 8.1 after PC weak up from sleep

Hello,
I have continuously problems with Photoshop CS6. After weak up my PC from sleep mode Photoshop take ages to start. It take about 15 minutes than it starts. After restart it's just fine and Photoshop start up in few seconds. Before with Windows 8 was everything ok.
I tried reinstall whole Creative Suite, delete all files from system folders of Photoshop, no plugin used, all is up to date!
CS used: Creative Suite Design Standard CS6, Czech language (Photoshop 13.01 64 bit and 32 bit - both do the same)
System: PC, Windows 8.1 64bit Czech language, system and program discs: Intel and Corsair SSD, CPU Intel i7 4Ghz, 24GB RAM, Graphic - Nvidia Geforce 580 GTX (graphic drivers up to date).
Adobe need to fix that.
Thanks for help, it's really annoying problem.

Martycz wrote:
Adobe need to fix that.
Along with all the other problems in this world that are all Adobe's fault.
OK so this all went pear shaped after updating Windows to 8.1? Have a look at Preferences > Performance and see if Graphics acceleration is still checked. Or it might even be greyed out. Apparently the 8.1 installer arbitarily installs a generic graphics card driver, so you might find that your drive is not so up to date as it used to be.
You know that you need to update it from the card maker's site?

Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

Hello! Help me please, I have a problem with the program occurred after the upgrade to version 3. 6. 16, namely by pressing the button 'Open a new tab' nothing happens. ?

This issue can be caused by the Ask.com toolbar (Tools > Add-ons > Extensions)
See:
* [[Troubleshooting extensions and themes]]

Problem with local editing after update to SP13

Hallo,
we have updated our Enterprise Portla 7.00 to SP13. Now many user have Problem with local editing. The error message is "The download of the document fail".
I know that every PC needs the "Docservice" Active X component installed. The "Docservice" is also installed.
At my PC theres only this problem with "html" documents.
What could be the problem. ?
Please help.
Many thanks
Ronald

We found that there is a problem with the Docservice Active X Component.
If we work in a deeper folder there is a problem with the length of the url. I changed the TEMP Setting
"Setting a different TEMP directory:
In cases that it is problematic to use the standard %TEMP% directory,
setting the environment variable SAPKM_USER_TEMP pinpointing to a
corresponding directory path (e.g.
X:\SHARES\USERS\xxx\CheckedOutDocuments) will be also supported. If the
access to that directory fails the standard %TEMP% directory will be
used as fallback."
I used "C:\TEMP" and now it works....... but this cant be the solution....
thans Ronald

Problem with my 7911 phone when i press Keys 1,2 or 3 it leads me to settings menu.

I have a problem with my 7911 phone when i press Keys 1,2 or 3 it leads me to settings menu. I cannot factory reset phone because when i press 1 after holding # it starts booting.

I have never heard of bug causing this type of an issue. Do you have other phones of the same models and if so do they behave the same way? Sounds to be like faulty phone.
Chris

Problem with Rescue and Recovery after installing Norton Internet Security 2010

Hi all.
It's my first time in this forum.
I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
The message I get it:
"Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
I tried to close the Norton but I couldn't find how.
Tanks
Doron71

Hi and welcome to the forum,
the reason for this situation is, that the antivir files are protected from being modified.
This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
This will skip the backup of this file and will fix your situation.
Please let me know, if you have covered this.
Cheers

I have a problem with external editing preferences where Photoshop will not launch when I choose "Edit In"...

Hi. I have a problem with external editing preferences. If I add Photoshop as an external editor, it won't launch when selected, if I add it as an additional external editor it will. Why? How can I fix this as I need to use Photoshop and another program as the additional external editor.
I use a Mac running OS X (10.8.5) and PS CS4 and LR 5.7. Any ideas on a fix? Thanks in advance.

I don't know why Photoshop won't start. However, it's possible to create external editor presets using the additional external editor tools. There are instructions on how to do this in the Lightroom help. You could assign Photoshop and create one preset, and then assign another program and create another preset.
I don't know if deleting your preferences would fix the problem or not. It can sometimes fix other problems.
Preference and other file locations in Lightroom 5

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Problem with starting Windows when W510 in docking station

When I put in my W510 to the docking station, I have usually every second day problems with starting up Windows operation system.
I make 2 videos, where on the first 100_1060.MOV you can see starting Windows when it is frozen (first 1 minute record, I start record after about 3 minutes frozen), then I have to reboot W510 by on/off button and start ThinkVantage.
On the second video 100_1061.MOV is starting operating system after ThinkVantage process, this start is OK.
http://www.licko.cz/w510/100_1060.MOV
http://www.licko.cz/w510/100_1061.MOV
Why I have this problems? I have latest Windows and W510 updates.
Regards,
Lubomir Licko
Solved!
Go to Solution.

There was some upgrades of Microsoft and Lenovo and I don't have this problem long time.

Problem with starting more than one SwingWorker

Hello
I wonder if anyone could tell me if there are known problems with starting more than one SwingWorker thread at once?
In response to an action the user performs, I need to obtain several lists of things from the server. This includes a couple of server-calls, and I want to do the server calls in a thread outside the awt-event thread. So I start a couple of SwingWorker-threads. This works fine sometimes, but not always. Sometimes code in some of the SwingWorkers finished method does not update the ui. I can see that the correct calls are made, but the ui is still not updated correctly. The problem seems to be related to the sequence of when the different thread are finished. For instance, if the sequence is like this:
SwingWorker1.construct
SwingWorker2.construct
SwingWorker1.finished
SwingWorker2.finished
Things go fine, but if the sequence is:
SwingWorker1.construct
SwingWorker1.finished
SwingWorker2.construct
SwingWorker2.finished
the ui-updates in SwingWorker1.finished is not done correctly.
Can anyone help me with this?

This is the point:
In one SwingWorker thread you have 1 construct method, and 1 finish method - which are both invoked once.
Therefore you only have one opportunity to update the gui in that thread. This forces you to use many threads if you want regular updates, which I try to avoid.
Therefore, the solution!
Have a loop in the construct method that executes the algorithm accordingly, updating the gui accordingly at regular times, maintaining just the 1 thread - becomes easier and nicer for the programmer and the JVM.
The finish method in this case is to update the gui when all iterations are finished.
There is nothing wrong with this. Just because you have a finish method that is called in the event-dispatching thread doesn't mean that all your update code must be in there.
What you MUST ensure is that ALL your update code is executed in the event-dispatching thread, that is the most important thing. After all, SwingWorker is just a helper class, not the gospel template of how to update a gui.

SOLMAN 7.0 EHP1 problem with starting SMD instance

Hello everyone, 
i have problem with starting instance SMD in my Solution Manager. After START this instance is status for one-two secend green and then status go to yellow color in SAP Management Console. I dont now where is problem, i try everything, can you help me? 
Here is LOG from dev_SMDAgent 
trc file: "G:\usr\sap\SMD\J98\work\dev_SMDAgent", trc level: 1, release: "701"
node name : smdagent
pid : 1136
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:55 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
 arg[02] : -DSAPINFO=SMD_98_server
 arg[03] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\J98\..\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\J98\..\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5392] Thu Jul 08 14:49:55 2010
[Thr 5392] JLaunchRequestQueueInit: create named pipe for ipc
[Thr 5392] JLaunchRequestQueueInit: create pipe listener thread
[Thr 2068] JLaunchRequestFunc: Thread 2068 started as listener thread for np messages.
[Thr 220] WaitSyncSemThread: Thread 220 started as semaphore monitor thread.
[Thr 5392] NiInit3: NI already initialized; param 'maxHandles' ignored (1;202)
[Thr 5392] CPIC (version=701.2009.01.26)
[Thr 5392] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 5392] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\J98\..\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\J98\..\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5392] JLaunchISetDebugMode: set debug mode [no]
[Thr 2448] JLaunchIStartFunc: Thread 2448 started as Java VM thread.
[Thr 2448] Thu Jul 08 14:49:56 2010
[Thr 2448] [JHVM_PrepareVMOptions] use java parameters set by profile parameter
 Java Parameters: -Xss2m
JHVM_LoadJavaVM: VM Arguments of node [SMDAgent]
-> stack : 1048576 Bytes
-> arg[ 0]: exit
-> arg[ 1]: abort
-> arg[ 2]: vfprintf
-> arg[ 3]: -DP4ClassLoad=P4Connection
-> arg[ 4]: -Dsys.global.dir=G:\usr\sap\SMD\SYS\global
-> arg[ 5]: -Dapplication.home=G:\usr\sap\SMD\J98\..\exe
-> arg[ 6]: -Djava.class.path=G:\usr\sap\SMD\J98\..\exe\jstartup.jar;G:\usr\sap\SMD\J98\..\exe\jvmx.jar;lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> arg[ 7]: -Djava.library.path=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\J98\..\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> arg[ 8]: -Dmemory.manager=256M
-> arg[ 9]: -Xmx256M
-> arg[ 10]: -Xms256M
-> arg[ 11]: -DLoadBalanceRestricted=no
-> arg[ 12]: -Djstartup.mode=JCONTROL
-> arg[ 13]: -Djstartup.ownProcessId=1136
-> arg[ 14]: -Djstartup.ownHardwareId=H1630488451
-> arg[ 15]: -Djstartup.whoami=server
-> arg[ 16]: -Djstartup.debuggable=yes
-> arg[ 17]: -Xss2m
-> arg[ 18]: -DSAPINFO=SMD_98_server
-> arg[ 19]: -DSAPSTARTUP=1
-> arg[ 20]: -DSAPSYSTEM=98
-> arg[ 21]: -DSAPSYSTEMNAME=SMD
-> arg[ 22]: -DSAPMYNAME=SAPVSM01_SMD_98
-> arg[ 23]: -DSAPDBHOST=
-> arg[ 24]: -Dj2ee.dbhost=
[Thr 2448] JHVM_LoadJavaVM: Java VM created OK.
JHVM_BuildArgumentList: main method arguments of node [SMDAgent]
-> arg[ 0]: run
-> arg[ 1]: jcontrol
[Thr 2448] JHVM_RegisterNatives: registering methods in com.sap.bc.proj.jstartup.JStartupFramework
[Thr 2448] Thu Jul 08 14:49:57 2010
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Initial (0)]
[Thr 2448] JLaunchISetState: change state from [Initial (0)] to [Waiting for start (1)]
[Thr 2448] JLaunchISetState: change state from [Waiting for start (1)] to [Starting (2)]
[Thr 3140] JLaunchIExitJava: exit hook is called (rc = -11112)
[Thr 3140] **********************************************************************
ERROR => The Java VM terminated with a non-zero exit code.
Please see SAP Note 943602 , section 'J2EE Engine exit codes'
for additional information and trouble shooting.
[Thr 3140] JLaunchCloseProgram: good bye (exitcode = -11112) 
LOG dev_jcontrol 
trc file: "G:\usr\sap\SMD\J98\work\dev_jcontrol", trc level: 1, release: "701"
node name : jcontrol
pid : 840
system name : SMD
system nr. : 98
started at : Thu Jul 08 14:49:53 2010
arguments :
 arg[00] : G:\usr\sap\SMD\J98\..\exe\jcontrol.exe
 arg[01] : pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
JStartupReadInstanceProperties: read instance properties [G:\usr\sap\SMD\J98\profile\smd.properties]
-> ms host :
-> ms port : 36
-> OS libs : G:\usr\sap\SMD\exe
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : G:\usr\sap\SMD\J98\profile\smd.properties
Instance properties
-> ms host :
-> ms port : 36
-> os libs : G:\usr\sap\SMD\exe
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
Worker nodes
-> [00] smdagent : G:\usr\sap\SMD\J98\profile\smd.properties
[Thr 5968] Thu Jul 08 14:49:53 2010
[Thr 5968] *** WARNING => Key profile parameters not set G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL:
j2ee/scs/host=
j2ee/scs/system= [jcntrxx.c 1459]
[Thr 5968] *** WARNING => Can't open default profile [G:\usr\sap\SMD\J98\..\SYS\profile\DEFAULT.PFL] for migration [jcntrxx.c 1460]
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlExecuteBootstrap: jcontrol runs in 6.20 compatible mode
[Thr 5968] JControlIBuildProcessList: Maximum error count is set to 4
[Thr 5968] [Node: SMDAgent] java home is set by profile parameter
 Java Home: C:\j2sdk1.4.2_26-x64\
[Thr 384] JControlRequestFunc: Thread 384 started as listener thread for np messages.
[Thr 5968] Thu Jul 08 14:49:54 2010
[Thr 5968] JStartupICheckFrameworkPackage: can't find framework package G:\usr\sap\SMD\exe\jvmx.jar
JStartupIReadSection: read node properties [smdagent]
-> node name : SMDAgent
-> node type : server
-> node id : 1
-> node execute : yes
-> java path : C:\j2sdk1.4.2_26-x64\
-> java parameters : -DP4ClassLoad=P4Connection
-> java vm version : 1.4.2_26-b03
-> java vm vendor : Java HotSpot(TM) 64-Bit Server VM (Sun Microsystems Inc.)
-> java vm type : server
-> java vm cpu : amd64
-> heap size : 256M
-> init heap size : 256M
-> root path : ..\SMDAgent
-> class path : lib\launcher\smdagentlauncher.jar;..\..\exe\jstartupapi.jar;..\..\exe\jstartupimpl.jar
-> OS libs path : G:\usr\sap\SMD\exe
-> main class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : G:\usr\sap\SMD\exe\jstartup.jar;G:\usr\sap\SMD\exe\jvmx.jar
-> shutdown class : com.sap.smd.agent.launcher.SMDAgentLauncher
-> parameters : run jcontrol
-> debuggable : yes
-> debug mode : no
-> debug port : 58981
-> shutdown timeout : 20000
[Thr 5968] JControlConnectToMS: jcontrol runs in 6.20 compatible mode without message server
JControlStartJLaunch: program = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[00] = G:\usr\sap\SMD\J98\..\exe\jlaunch.exe
-> arg[01] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> arg[02] = -DSAPINFO=SMD_98_server
-> arg[03] = -nodeId=0
-> arg[04] = -file=G:\usr\sap\SMD\J98\profile\smd.properties
-> arg[05] = -syncSem=JSTARTUP_WAIT_ON_840
-> arg[06] = -nodeName=smdagent
-> arg[07] = -jvmOutFile=G:\usr\sap\SMD\J98\work\jvm_SMDAgent.out
-> arg[08] = -stdOutFile=G:\usr\sap\SMD\J98\work\std_SMDAgent.out
-> arg[09] = -locOutFile=G:\usr\sap\SMD\J98\work\dev_SMDAgent
-> arg[10] = -mode=JCONTROL
-> arg[11] = pf=G:\usr\sap\SMD\J98\..\SYS\profile\SMD_J98_SAPVSM01
-> lib path = PATH=C:\j2sdk1.4.2_26-x64
jre\bin\server;C:\j2sdk1.4.2_26-x64
jre\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
-> exe path = PATH=C:\j2sdk1.4.2_26-x64
bin;G:\usr\sap\SMD\exe;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files (x86)\Microsoft SQL Server\100\DTS\Binn\;C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\PrivateAssemblies\;G:\usr\sap\SMD\exe
[Thr 5968] JControlICheckProcessList: process SMDAgent started (PID:1136)
[Thr 5968] Thu Jul 08 14:49:59 2010
[Thr 5968] JControlICheckProcessList: process SMDAgent (pid:1136) died (RUN-FLAG)
[Thr 5968] JControlIResetProcess: reset process SMDAgent
[Thr 5968] JControlIResetProcess: [SMDAgent] not running -> increase error count (1)
[Thr 5968] JControlICheckProcessList: shutdown node from console -> restart off
THANKS FOR RESPONSE

Hi Martin,
Check note 940893 (If this is not done already )
Regards
Tobias

Solutions for problems with QuickTime files in After Effects CC (12.0)

We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components.
Please read that post and let us know here on this forum thread if you have any questions or comments.
Also, please let us know if the proposed solution works for you.

Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x04981f90 0 + 77078416
1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

Problem with Starting Edit JTable after Enter Pressed

Similar Messages

Maybe you are looking for