Problems at receiving messages at RFC-Sender

Hi all,
i have configured the following scenario in NWDS for testing a message flow in PO:
SOAP request comes into PI -> map Request to RFC -> send request to ERP Test System -> wait for RFC Response -> send to PI -> map Response to SOAP -> send to File
Therefore i have, amongst others, created a RFC Channel for sending the RFC response to the mapping operation.When i run the scenario for the first time everything worked pretty well without any error messages. But after testing it the second time the message got stuck in the ERP Test System and couln't be forwarded anymore. It turned out that whenever i deployed the channel with some config changes, the message flow worked for the first time, but crashed after every following.
In the error log i get the following message:
java.lang.RuntimeException: Bean Z_PP_PDES_RESPONSE not found on host xxx, ProgId =RFC_HMC100_POD: Object not found in lookup of Z_PP_PDES_RESPONSE.
at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:121)
at com.sap.engine.services.rfcengine.RFCJCOServer$J2EEApplicationRunnable.run(RFCJCOServer.java:267)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:185)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:302)
Caused by: com.sap.engine.services.jndi.persistent.exceptions720.NameNotFoundException: Object not found in lookup of Z_PP_PDES_RESPONSE.
When i look in the message log at the same position of a successful message, the log says...
MP: processing local module localejbs/RfcAFBean
... which is actually the module defined in the channel.
So for me it looks like that after the first run something in the module config crashes and the channel tries to use Z_PP_PDES_RESPONSE instead of the RfcAFBean.
Any help very much appreciated!!!
Thanks,
Maurice

Issue has been solved! There has been a running jco server with same program id as the one of the scenario. This led to complications. After stopping the server it worked perfectly...

Similar Messages

Problem in receiving messages via RFC Sender Adapter

Hi,
I have problems in receiving messages from SAP backens systems. Sometimes we are getting all messages sometimes not. Strange.
We are transfering report-results via asynchronous RFC calls. To avoid big message sizes we split them up in max. 1000 rows blocks.
Each RFC call on backend side is completed with COMMIT WORK!
We increased the number of connections in the RFC sender adapter. Then it was better, but the problem still exists! Not so often, but sometimes !?!?!
I hope everybody can help me. Thanks a lot!
best regards,
Hannes

hi,
when you don't receive messages what do you see in SM58
on the r3?
any errors over there?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

I have set up my Yahoo! account to be used as default mail account on iMac. I am receiving messages, but cannot send them. All settings appear to be right. What can I do?

I have set up my Yahoo! account to be used as default mail account on iMac. I am receiving messages, but cannot send them. All settings appear to be right. What can I do?

The problems I am having are when I use Yahoo! with the iMac mail application. Yahoo works fine on the browser.
The outgoing settings I am using are:
Outgoing Mail Server (SMTP): yahoo.co.uk (Offline)
Description: yahoo.co.uk
Server name: smtp.mail.yahoo.com
Use default ports (25, 465, 587)
Use SSL
Authentication: Password
User Name: ********@yahoo.co.uk
Password: *************
Of note:
I cannot stop it from saying Offline after the outgoing mail server.
I have used the same settings on my ipad and iphone and that works fine.
Really grateful if you can help.
Thanks

HT201412 My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail

My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail

Try resseting the network settings in settings>general then go to reset a the bottom.
Then reset NETWORK settings.

HT4623 I can receive messages but not send them. any ideas?

I can receive messages but not send any. any ideas?

Are you talking about text message or emails?
http://support.apple.com/kb/ts2755

All messages are marked as spam, 5.7.1 ? how do I fix this, I can receive messages but cant send.

All messages are marked as spam, 5.7.1 ? how do I fix this, I can receive messages but cant send.

Oh with the rot that goes on with emails and spam filters these days almost anything can be considered spam. Mail addresses to your self can be all that is required for it to be spam on some systems, so test using your email address to check it is working must be done with an account not hosted bu the same provider, given the web site is not blacklisted.
I checked before replying, as brand new web sites are often blacklisted because they share a server or IP address range that is blacklisted (Poor neighborhood) or the server is run from a dynamic IP address and therefore considered to be a home computer with an infection.
One thing you can try is go to the account settings on the tools menu, open the settings pane by clicking on the account name and removing any reply to address. (some spam filters get all excited about reply to addresses. If that does not work I suggest you contact hostbox for a more detailed instruction on why your mail is considered "confirmed spam".
But please let us know how you get on.

Problem in receiving message from server

Hi all,
i am new to socket programming. i tried a simple echo server-client programs. The problem is client is able to send the message but it is not receiving and no problem with server. can anyone help me?

(a) is the client flushing its output stream?
(b) is the server flushing its output stream?
(c) are there any exceptions being thrown?
(d) What if anything is the server receiving?
(e) What if anything is the client receiving?

I am unable to send text messages in Message. I can receive messages but not send. I am able to do both with my iPhone. Why can't I send?

Why can't I send text messages on my iPad? I can send and receive messages on my iPhone.

Hi Kathy,
Happy Holidays! Do you have an iPad with cellular service and a text-messaging plan?
Send messages with your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201287
What's the difference between SMS/MMS and iMessage?
SMS/MMS lets you send text messages and photos to other cellular phones or devices. iMessage lets you send text messages and photos to another iOS device over Wi-Fi, without worrying about text-messaging charges (cellular data charges may apply).
What do I need to use SMS/MMS and iMessage?
Here's what you need to use SMS/MMS and iMessage:
SMS/MMS: A text-messaging plan. Contact your carrier for more information.
iMessage: An iPhone, iPad, or iPod touch with iOS 5 or later.
How do I know if my message used SMS/MMS or iMessage?
You can tell which type of message you're sending by the color of the Send button and text bubble.
SMS/MMS: Send button and text bubbles are green.
iMessage: Send button and text bubbles are blue.
How can I link my iPhone number with Messages on my iPad, iPod touch, or Messages for Mac?
When you sign in to Messages with your Apple ID on your iPhone, you link your phone number to your Apple ID. If you then sign in to Messages with the same Apple ID on your iPad, iPod touch, or Mac, Messages will link that device to your phone number as well.
I hope this information helps ....
- Judy

Mail can receive messages but cannot send them

I can receive messages in Mail but suddenly I cannot send them.
I just had my hard drive replaced. Runing 10.7.2.
I can send message using my iPad and the same account.

Check all your server setting on that account for the correct username and password, port number and the server address (POP/imap.Mail.XXX.com/net).
This is the only reason mail will not be sent. Incorrect settings on the account.
It may be best to delete the account and recreate it. that way you aren't skipping over the incorrect setting as we humans often do.
Just like I didn't type a capitol T on That in the above sentence. Although I caught that one.

Problem with receiving message over socket

class TCPClient5 {
public static void main(String argv[]) throws Exception
java.io.InputStream s = null;
java.io.InputStreamReader r = null;
try {
URLConnection uc = new URL("http://www.countryflower.com/Country_Flower_Home_Pic.jpg").openConnection();
s = uc.getInputStream();
System.out.println(uc.getContentLength());
int x = uc.getContentLength();
BufferedInputStream buffer = new BufferedInputStream(s);
File f = new File("c:\\Users\\dell\\Desktop\\image\\image.jpg");
DataOutputStream outdata = new DataOutputStream(new FileOutputStream(f));
int n = 0;
while(true) {
n = s.read(byte[x] buffer,0,buffer.length); ----- here I am getting error
if (n == -1) break;
if (n == 0) {Thread.sleep(50); continue;}
outdata.write( buffer,0,buffer.length);
outdata.close();
finally {
//if (b != null) b.close();
if (r != null) r.close();
if (s != null) s.close();
In above code I am getting error .................
I am unable to receive message from server..........Please help me with code

n = s.read(byte[x] buffer,0,buffer.length); ----- here I am getting errorHere we are unable to read your mind. What error? The syntax you've typed isn't correct, is that really what you have?
if (n == -1) break;
if (n == 0) {Thread.sleep(50); continue;}'n' can never be zero. Omit this line.
outdata.write( buffer,0,buffer.length); That should be outdata.write(buffer, 0, n);

Can receive messages but not send them....only certain numbers.

Hi, My sister is having an issue with her iPhone 5 that she can receive messages from my iphone 5s but cannot reply to them.....she has noticed it with one other number, Any ideas?
She has reset her phone, checked my number is right and we havent blocked each other.....
Opinions welcome on what could cause this....thanks

http://support.apple.com/kb/HT3529
http://support.apple.com/kb/ts2755

I can receive messages but cannot send them; a big red "X"

Solved!
Go to Solution.

We're going to need a lot more information here. what kind of messages? Emails, Text Messages? If email messages then what email service (gmail, hotmail, etc.) are you using and when you open the mail with the red x and scroll up into the headers what is the error message you receive?
Please be as specific as you can be about the problem and whether or not you've contacted your carrier about the issue, as well.
John
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Problems when receiving messages

When I receive a message (SMS) can I not see this on the display, neither that I have a new message nor that I have any unread ones although there is a message in the box. My wife has exactly the same problem in her Iphone. This problem has not existed earlier

Hi,
Please also check whether the migration completed successfully.
If it still not working after performing suggestions that Jason provided, please try to move the mailbox to another database for testing. It will repair something odd automatically.
Thanks
Mavis
Mavis Huang
TechNet Community Support

I receive messages but cannot send them

The other number is from the same carrier and is not an iphone. It is the only number that does this. I can recieve her messages but when i attempt to reply or send one, i recieve an error code telling me that the number is invalid.

Hi Brittney257,
Welcome to the Support Communities!
The article below may be able to help you with this.
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If the issue occurs with a specific contact or contacts, back up or forwardimportant messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
Back up and restore your iPhone as new.
If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
Contact your carrier to confirm that you are provisioned for sending SMS and are in an area with cellular coverage.
Contact your carrier to verify there are no blocks or filters placed on your wireless account preventing you from sending SMS.
Cheers,
- Judy

Problems in RFC Sender adapter

Hello
I am having a scenario where I am sending the message through RFC sender. The message is getting posted on integration server but its giving error in SXMB_MONI.
The error says
"HTTP response contains status code 503 with the description Service Unavailable XML element Envelope missing in SOAP message header (SAP XI Extension)" in call adapter.
I checked some notes mentioning about poll parameter of sap af messaging in visual admin but still the problem is same.
Thanks in advance.
Regards
Rajeev

Udo,
I checked the file adapter but the status is green which says "No message processing till now" and also it is not listed in Message monitoring.
Also as described in note mentioned by shekhar I tried to change the Visual Admin poll interval. also i tried that URL which gave "Messaing servlet is active"
<?xml version="1.0" encoding="UTF-8" ?>
- <scenario>
<scenname>MSG_SCEN</scenname>
<scentype>SERV</scentype>
<sceninst>MSG_001</sceninst>
<scenversion>001</scenversion>
- <component>
<compname>SERVLET</compname>
<compdesc>Messaging System</compdesc>
<comphost>localhost</comphost>
<compinst>MSG_001</compinst>
- <message>
<messalert>OKAY</messalert>
<messseverity>100</messseverity>
<messarea>QR</messarea>
<messnumber>801</messnumber>
<messparameter>na</messparameter>
<messtext>MessagingServlet is active.</messtext>
</message>
</component>
</scenario>

Problems at receiving messages at RFC-Sender

Similar Messages

Maybe you are looking for