Reading data from flat file Using TEXT_IO

Question

Dear Gurus
I already posted this question but this time i need some other changes .....Sorry for that ..
I am using 10G forms and using TEXT_IO for reading data from flat file ..
My data is like this :-
0|BP-V1|20100928|01|1|2430962.89|27|2430962.89|MUR|20100928120106
9|2430962.89|000111111111|
1|61304.88|000014104113|
1|41961.73|000022096086|
1|38475.65|000023640081|
1|49749.34|000032133154|
1|35572.46|000033093377|
1|246671.01|000042148111|
Here each column is separated by | . I want to read all the columns and want to do some validation .
How can i do ?
Initially my requirement was to read only 2 or 3 columns so i did like this ...
Procedure Pay_Simulator(lfile_type varchar2,lac_no varchar2,lcur varchar2,lno_item number,ltotal number,ldate date,lpay_purp varchar2,lfile_name varchar2)
IS
v_handle utl_file.file_type;
v_filebuffer varchar2(500);
line_0_date VARCHAR2 (10);
line_0_Purp VARCHAR2 (10);
line_0_count Number;
line_0_sum number(12,2);
line_0_ccy Varchar2(3);
line_9_sum Number(12,2);
line_9_Acc_no Varchar2(12);
Line_1_Sum Number(12,2);
Line_1_tot Number(15,2) := 0;
Line_1_flag Number := 0;
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
Begin
v_file := mcb_simulator_pkg.GET_FILENAME(lfile_name); -- For the file name
v_path :=rtrim(regexp_substr( lfile_name , '.*\\' ),'\'); For the Path
v_path := SUBSTR (lfile_name,0, INSTR (lfile_name, '\', -1));
v_handle := UTL_FILE.fopen (v_path, v_file, 'r');
LOOP
UTL_FILE.get_line (v_handle, v_filebuffer);
IF SUBSTR (v_filebuffer, 0, 1) = '0' THEN
SELECT line_0 INTO line_0_date
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
SELECT line_0 INTO line_0_Purp
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 4;
SELECT line_0 INTO line_0_count
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 7;
SELECT line_0 INTO line_0_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 8;
SELECT line_0 INTO line_0_ccy
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_0, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 9;
ELSIF SUBSTR (v_filebuffer, 0, 1) = '9' THEN
SELECT line_9 INTO line_9_Acc_no
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_9, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
SELECT line_9 INTO line_9_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_9, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 2;
ELSIF SUBSTR (v_filebuffer, 0, 1) = '1' THEN
line_1_flag := line_1_flag+1;
SELECT line_1 INTO line_1_sum
FROM (SELECT LTRIM (REGEXP_SUBSTR (v_filebuffer, '[^|]+{1}', 1, LEVEL)) line_1, ROWNUM rn
FROM DUAL
CONNECT BY LEVEL <= LENGTH (REGEXP_REPLACE (v_filebuffer, '[^|]*')) + 1)
WHERE rn = 3;
Line_1_tot := Line_1_tot + line_1_sum;
END IF;
END LOOP;
DBMS_OUTPUT.put_line (Line_1_tot);
DBMS_OUTPUT.PUT_LINE (Line_1_flag);
UTL_FILE.fclose (v_handle);
END;
But now how can i do ? Shall i use like this select Statement for all the columns ?

Answer 1

Sorry for that ..
As per our requirement ...
I need to read the flat file and it looks like like this .
*0|BP-V1|20100928|01|1|2430962.89|9|2430962.89|MUR|20100928120106*
*9|2430962.89|000111111111|*
*1|61304.88|000014104113|*
*1|41961.73|000022096086|*
*1|38475.65|000023640081|*
*1|49749.34|000032133154|*
*1|35572.46|000033093377|*
*1|246671.01|000042148111|*
*1|120737.25|000053101979|*
*1|151898.79|000082139768|*
*1|84182.34|000082485593|*
I have to check the file :-
Validation are 1st line should start from 0 else it should raise an error and insert that error into one table .
The for 2nd line also same thing ..it should start from 9 else it should raise an error and insert that error into one table .
Then the 3rd line should start from 1 else it should raise an error and insert that error into one table .
After that i have to do a validation like i will read the 1st line 2nd column .. It should be like this BP-V1 else raise an error and insert that error to a table . Then i will check the 3rd column which is 20100928 , it should be YYYYMMDD format else same thing ERROR.
Then like this for all columns i have different validation .......
Then it will check for the 2nd line 3rd column . this is an account no .1st i will check it should be 12 char else ERROR .Then I will check that what user has imputed in the form.Like for example User putted 111111111 then i will check with this 000111111111 which is there in the 2nd line . I have to add 000 before that Account no which user imputed .
Then the lines which is starting from 1 , i have to take all the 2nd column for all the lines which is starting from 1 and i have to do a sum . After that i have to compare that sum with the value in the 1st lines ( Starting from 0) 6th column . It should be same else ERROR ...
Then same way i have to count all the lines which is starting from 1 . Then i have to compare with the 7th column of 1st line . It should be same . Here in this file it should be 9.
MY CODE IS :-
Procedure Pay_Simulator(lfile_type varchar2,lac_no varchar2,lcur varchar2,lno_item number,ltotal number,ldate date,lpay_purp varchar2,lfile_name varchar2)
IS
v_handle TEXT_IO.file_type;
v_filebuffer varchar2(500);
line_0_date VARCHAR2 (10);
line_0_Purp VARCHAR2 (10);
line_0_count Number;
line_0_sum number(12,2);
line_0_ccy Varchar2(3);
line_9_sum Number(12,2);
line_9_Acc_no Varchar2(12);
Line_1_Sum Number(12,2);
Line_1_tot Number(15,2) := 0;
Line_1_flag Number := 0;
lval number;
lacno varchar2(16);
v_file varchar2(20);
v_path varchar2(50);
LC$String VARCHAR2(50) ;--:= 'one|two|three|four|five|six|seven' ;
LC$Token VARCHAR2(100) ;
i PLS_INTEGER := 2 ;
lfirst_char number;
lvalue Varchar2(100) ;
Begin
v_file := mcb_simulator_pkg.GET_FILENAME(lfile_name); For the file name
v_path :=rtrim(regexp_substr( lfile_name , '.*\\' ),'\'); For the Path
--v_path := SUBSTR (lfile_name,0, INSTR (lfile_name, '\', -1));
Message(lfile_name);
v_handle := TEXT_IO.fopen(lfile_name, 'r');
          BEGIN
                    LOOP
                    TEXT_IO.get_line (v_handle, v_filebuffer);
                    lfirst_char := Substr(v_filebuffer,0,1);
                    --Message('First Char '||lfirst_char); 
                              IF lfirst_char = '0' Then
                              Loop
                              LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
                              Message('VAL - '||LC$Token);
                              lvalue := LC$Token;
                              EXIT WHEN LC$Token IS NULL ;
i := i + 1 ;
End Loop;
                              Else
                                   Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (9999,'0002','First line should always start with 0');
                                   Forms_DDL('Commit');
                                   raise form_Trigger_failure;
                              End if ;
                    TEXT_IO.get_line (v_handle, v_filebuffer);
                    lfirst_char := Substr(v_filebuffer,0,1);
                    LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
                    --Message('Row '||LC$Token);
                         IF lfirst_char = '9' Then
                              Null;
                         Else
                              Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (8888,'0016','Second line should start with 9');
                              Forms_DDL('Commit');
                              raise form_Trigger_failure;
                         End IF;
                    LOOP
                    TEXT_IO.get_line (v_handle, v_filebuffer);
                    lfirst_char := Substr(v_filebuffer,0,1);
                    LC$Token := mcb_simulator_pkg.Split( v_filebuffer, i , '|') ;
                    --Message('Row '||LC$Token);
                              IF lfirst_char = '1' Then
                              Null;
                              Else
                                   Insert into MU_SIMULATOR_output_ERR (load_no,ERR_CODE,ERR_DESC) values (7777,'0022','The third line onward should start with 1');
                                   Forms_DDL('Commit');
                                   raise form_Trigger_failure;
                              End if;
                    END LOOP;
                    --END IF;
                    END LOOP;
          EXCEPTION
               When No_Data_Found Then
          TEXT_IO.fclose (v_handle);
          END;
Exception
     When Others Then
     Message('Other error');
END;
I am calling the FUNCTION which you gave SPLIT as mcb_simulator_pkg.Split.