Scanning .txt file and outputting results?

Greetings Everyone. My employer has charged me with a rather
confusing task. Basically I need to scan a .txt file and retrieve
some information from it. Here is a little background on the file
itself.
This is a feed file containing the information for employees
such as name, department, employement status etc...Zeros are used
in place of spaces in this file. What I am charged with is
retrieving the employment status and name for every single person
in the file (60,000+).
I need to write a coldfusion script that can do the
following.
1. Scan a .txt file that is sent to me every night and look
for the 99th character on each line of the .txt file
2. If the 99th character is a 'T' I need to pull characters
'10-50' (which contain the name for that person).
3. Output the results of the scan to a coldfusion page
displaying the individuals' names.
If anyone out there can point me in the right direction I
would be very grateful. I've been looking for websites on this
topic but I have been unsucessful so far. Should I post this in the
advanced section of the cf forums? Once again, thank you for any
help you can give me.

I guarantee you can do this! And it shouldnt be to hard so
you can breath a sigh of relief... :)
I would use <cffile action="read" file="filepath/name.txt"
variable="fileContents">
Then you should be able to do something like <cfset
fileArray = ListToArray(fileContents, "#CHR(13)##CHR(10)#")>
Now you have an array so you can loop through and try
something like the following...
<cfloop index="i" from="1" to="#ArrayLen(fileArray)#"
step="1">
<cfif fileArray
NEQ "">

<cfset 99thchar = Mid(fileArray, 99, 1)>
<cfif 99thchar EQ "T">

<cfset empName = Mid(fileArray
, 10, 40)>

<cfset empName = Replace(empName, "0", "#CHR(32)#")>
<cfoutput>#empName#</cfoutput> 
</cfif>
</cfif>
</cfloop>
That should be close to what you could use... You may have to
tweak it a bit... now if it is going though 60000+ records this may
take a while...lol You might have to use the cfsetting tag to
extend the normal request timeout..
Hope this helps!

Similar Messages

Read from .txt file and output the content as two arrays

I am using the contoured move to control the x-y stage. The trajectory datas for x and y axis are generated using my interpolation program and it is stored in a .txt file as two columns. What I want to do is read .txt file and output the content of this file as two arrays. Is there anyone has any ideas? Thanks, the .txt file is attached.
Attachments:
R.75.txt ‏172 KB

Hi Awen,
This is quite easy to do, you can merely use the "read from spreadsheet file" function to get a 2D array (2 columns and n rows) and then use the index array function to get whatever row/colums you want..
Hope the attached VI helps you
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
read sprdsheet file.vi ‏27 KB

I want to open a txt file and output data through an AO-using DAQmx for PXI

I have a PXI running a 8145RT CPU. I have a PX6040E Multifunction DAQ card installed in the PXI. I want to program an application where I open a txt file (existing in one of the the RT machines' folders), read the first row, and output its data through an AO channel. The drivers I should use is DAQmx v7.1, and the Labview RT v.7
Any idea?

What exactly are you having problems with? Reading a text file can be done a number of ways. Look at the File I/O palette and check out Read Lines From File or Read Characters From File. There are string to number conversion functions on the string palette (i.e. Scan From String). There are also numberous shipping examples on using DAQmx for analog out. If you have a specific problem or question, please post back with additional details.

Compare two .txt files and show result

HI
Could anybody show me how to compare two text files and show the result.
i.e.
textfile1.txt
harry.denmark
karry.sweden
textfile2.txt
harry.denmark
karry.sweden
marry.usa
Compare
result=
marry.usa
The text files I want to compare are how ever much larger than this example. (up to 2-3.000 words)
anybody ??
Sincerly
Peder

HI & thanks for reply
I know almost nothing about java so could you or anybody please show me the code to do this? Or is it perhaps too large or difficult a code?
I know how to compile a .java file and run it in prompt :-) and thats about it (almost)
I offcourse understand if its too much to ask for :-)

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?

I have a VI and an attched .txt data file. Now I want to read the data from the .txt file and display it as an array in the front panel. But the result is not right. Any help?
Attachments:
try2.txt ‏2 KB
read_array.vi ‏21 KB

The problem is in the delimiters in your text file. By default, Read From Spreadsheet File.vi expects a tab delimited file. You can specify a delimiter (like a space), but Read From Spreadsheet File.vi has a problem with repeated delimiters: if you specify a single space as a delimiter and Read From Spreadsheet File.vi finds two spaces back-to-back, it stops reading that line. Your file (as I got it from your earlier post) is delimited by 4 spaces.
Here are some of your choices to fix your problem.
1. Change the source file to a tab delimited file. Your VI will then run as is.
2. Change the source file to be delimited by a single space (rather than 4), then wire a string constant containing one space to the delimiter input of Read From Spreadsheet File.vi.
3. Wire a string constant containing 4 spaces to the delimiter input of Read From Spreadsheet File.vi. Then your text file will run as is.
Depending on where your text file comes from (see more comments below), I'd vote for choice 1: a tab delimited text file. It's the most common text output of spreadsheet programs.
Comments for choices 1 and 2: Where does the text file come from? Is it automatically generated or manually generated? Will it be generated multiple times or just once? If it's manually generated or generated just once, you can use any text editor to change 4 spaces to a tab or to a single space. Note: if you want to change it to a tab delimited file, you can't enter a tab directly into a box in the search & replace dialog of many programs like notepad, but you can do a cut and paste. Before you start your search and replace (just in the text window of the editor), press tab. A tab character will be entered. Press Shift-LeftArrow (not Backspace) to highlight the tab character. Press Ctrl-X to cut the tab character. Start your search and replace (Ctrl-H in notepad in Windows 2000). Click into the Find What box. Enter four spaces. Click into the Replace With box. Press Ctrl-V to paste the tab character. And another thing: older versions of notepad don't have search and replace. Use any editor or word processor that does.

Scenario to read from txt-file and create a sales order

Hi,
i have started creating a scenario to read from an txt-file and to create a sales order.
When i activate my scenario, i get the following message :
 no scenario step (vBIU) associated for this step for the incoming system (SysId)
When i look into the detailed xml-file i see that all the records are read from the file, but there is no next step to be treated.
Has somebody any idea how this come ?
-<Msg MessageLog="true" msglogexcl="false" logmsg="0009" recording="true" BeginTimeStamp="20111202095144" MessageId="11120209514499820828C0A801674F24" xmlns="urn:com.sap.b1i.vplatform:entity">-<Header><msglog b1ifactive="true" always="false" step="Default message log"/>-<Resumption><starter ipo="/vP.0010000138.in_FEAN/com.sap.b1i.vplatform.runtime/INB_FI_EXST_ASYN_NAM/INB_FI_EXST_ASYN_NAM.ipo/proc"/></Resumption><IPO tid="11120205535899820808C0A801678C54" Id="INB_FI_EXST_ASYN_NAM"/><Sender Id="0010000138"/><Inbound file="ORDERS_TEST" ext="csv" path="C:\TEMP\In" pltype="txt" wrap="" deli=";"/></Header>-<Body><Payload Type="File exist" Role="T"/>-<Payload Role="S">-<io xmlns="urn:com.sap.b1i.bizprocessor:bizatoms" pltype="txt">
-<row>
<col>OH</col>
<col>0000087077</col>
<col>201110041205</col>
<col>220</col>
<col>9</col>
<col>201110191702</col>
<col>8710624300012</col>
<col>8714252008609</col>
<col>8710624300012</col>
<col>8714252008609</col>
<col>8710624300012</col>
<col>N</col>
<col>N</col>
<col>N</col>
</row>
-<row>
<col>OL</col>
<col>1</col>
<col>8711715844378</col>
<col>20</col>
</row>-<row>
<col>OL</col>
<col>2</col>
<col>8711715844392</col>
<col>60</col>
</rowrow>
<col>OL</col>
<col>16</col>
<col>8710251791092</col>
<col>280</col>
</row>
</io>
</Payload>
</Body>
</Msg>
This is my final atom :
<?xml version="1.0" encoding="UTF-8"?><xsl:stylesheet xmlns:b1e="urn:com.sap.b1i.sim:b1event" xmlns:b1ie="urn:com.sap.b1i.sim:b1ievent" xmlns:bfa="urn:com.sap.b1i.bizprocessor:bizatoms" xmlns:jdbc="urn:com.sap.b1i.adapter:jdbcadapter" xmlns:rfc="urn:sap-com:document:sap:rfc:functions" xmlns:sim="urn:com.sap.b1i.sim:entity" xmlns:utils2="com.sap.b1i.bpc_tools.Utilities" xmlns:vpf="urn:com.sap.b1i.vplatform:entity" xmlns:xci="urn:com.sap.b1i.xcellerator:intdoc" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0" bfa:force="" vpf:force="" jdbc:force="" rfc:force="" b1ie:force="" b1e:force="" xci:force="" sim:force="" utils2:force=""><xsl:output method="xml" encoding="UTF-8" indent="yes"></xsl:output><xsl:param name="atom"></xsl:param><xsl:param name="sessionid"></xsl:param><xsl:variable name="msg" select="/vpf:Msg/vpf:Body/vpf:Payload[./@Role='S']"></xsl:variable><xsl:variable name="vpSender" select="/vpf:Msg/vpf:Header/vpf:Sender/@Id"></xsl:variable><xsl:variable name="vpObject" select="/vpf:Msg/vpf:Header/vpf:Sender/@ObjId"></xsl:variable><xsl:variable name="vpReceiver" select="/vpf:Msg/vpf:Header/vpf:ReceiverList/vpf:Receiver[./@handover='P']/@Id"></xsl:variable><xsl:template match="/">
<Msg xmlns="urn:com.sap.b1i.vplatform:entity">
<xsl:copy-of select="/vpf:Msg/@*"></xsl:copy-of>
<xsl:copy-of select="/vpf:Msg/vpf:Header"></xsl:copy-of>
<Body>
<xsl:copy-of select="/vpf:Msg/vpf:Body/*"></xsl:copy-of>
<Payload Role="R" id="{$atom}">
<xsl:call-template name="transform"></xsl:call-template>
</Payload>
</Body>
</Msg>
</xsl:template><xsl:template name="transform">
<FinalAtomResult xmlns="">
<BOM>
<BO>
<AdmInfo>
<Object>17</Object>
<Version>2</Version>
</AdmInfo>
 <Documents>
 <row>
 <DocDate>
 <xsl:copy-of select="$msg/io/row[0]/col[2]/text()"></xsl:copy-of>
 </DocDate>
 <DocDueDate>
 <xsl:copy-of select="$msg/io/row[0]/col[5]/text()"></xsl:copy-of>
 </DocDueDate>
 <CardCode>KD10251</CardCode>
 <NumAtCard>
 <xsl:copy-of select="$msg/io/row[0]/col[1]/text()"></xsl:copy-of>
 </NumAtCard>
 <U_PMX_JD_COMP>32</U_PMX_JD_COMP>
 </row>
 </Documents>
 <Document_Lines>
 <xsl:for-each select="$msg/io/row">
 <row>
 <BarCode>
 <xsl:copy-of select="$msg/io/row[*]/col[2]/text()"></xsl:copy-of>
 </BarCode>
 <Quantity>
 <xsl:copy-of select="$msg/io/row[*]/col[3]/text()"></xsl:copy-of>
 </Quantity>
 </row>
 </xsl:for-each>
 </Document_Lines>

Mike,
you were right, you may not specify the extension of a file.
Another thing i detected is that the loop of my data start with the index 1 instead of 0 !!!
In this scenario, i have to read all the lines of the file and each time i should do a SQL-query,
so that i can use the result to build my sales document.
Do you know if it this is possible or have you any idea how to do this ?
thx,
Mario

How to encypt a .txt file and how to decrypt a same .txt file when i need

My requirement is i want to encrypt a .txt file and
keep it in some folder. In that file we put database connection
information. when ever we need that file we have to access it and decrypt
it. with that decrypted values we have make connection with database.
i am sending a code in which i wrote both encyption and decrytion in same file, but i want to do it separately.
Please help me regarding this.
package com.businessobjects;
import java.io.*;
import java.security.*;
import javax.crypto.*;
public class EncryptDecrypt
     public static void EncodeIt()
          try
          // generate Cipher objects for encoding and decoding
          Cipher itsocipher1 = Cipher.getInstance("DES");
          Cipher itsocipher2 = Cipher.getInstance("DES");
          // generate a KeyGenerator object
          KeyGenerator KG = KeyGenerator.getInstance("DES");
          System.out.println("Using algorithm " + KG.getAlgorithm());
          // generate a DES key
          Key mykey = KG.generateKey();
          // initialize the Cipher objects
          System.out.println("Initializing ciphers...");
          itsocipher1.init(Cipher.ENCRYPT_MODE, mykey);
          itsocipher2.init(Cipher.DECRYPT_MODE, mykey);
          // creating the encrypting cipher stream
          //System.out.println("Creating the encrypting cipher stream...");
          /*FileInputStream fis = new FileInputStream("Original.txt");
FileOutputStream fos = new FileOutputStream("Encypt.txt");
          CipherInputStream cis1 = new CipherInputStream(fis, itsocipher1);
          // creating the decrypting cipher stream
          //System.out.println("Creating the decrypting cipher stream...");
          byte[] b1 = new byte[8];
int i1 = cis1.read(b1);
          while (i1 != -1)
               fos.write(b1, 0, i1);
               i1 = cis1.read(b1);
fis.close();
fos.close();*/
// writing the decrypted data to output file
FileInputStream fis1 = new FileInputStream("Encypt.txt");
FileOutputStream fos1 = new FileOutputStream(Decypt.txt");
CipherInputStream cis2 = new CipherInputStream(fis1, itsocipher2);
          byte[] b2 = new byte[8];
          int i2 = cis2.read(b2);
          while (i2 != -1)
               fos1.write(b2, 0, i2);
               i2 = cis2.read(b2);
fis1.close();
          fos1.close();
//cis1.close();
          cis2.close();
          catch (Exception e)
          System.out.println("Caught exception: " + e);
With regards
Pavankumar.

here is the solution you wanted it
uses password based encryption
but your requirements are for very badly
designed code
This is the encryption part
it converts the inputfile original.txt
into the outputfile encrypt.txt which
contains the original encrypted
import java.io.FileInputStream;
import java.io.FileOutputStream;
import javax.crypto.Cipher;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.PBEParameterSpec;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
public class PWBEncryption {
    // Salt
    static byte[] salt = {
        (byte)0xc7, (byte)0x73, (byte)0x21, (byte)0x8c,
        (byte)0x7e, (byte)0xc8, (byte)0xee, (byte)0x99
    // Iteration count
    static int count = 20;
    public PWBEncryption() {
    // params:
    // password   -> the pasword used to create the key
    // inputfile -> the file containing the stuff to be encrypted
    // i.e. original.txt
    // outputfile -> the file that will contain the encrypted stuff
    // i.e. encrypt.txt
    public static boolean doIt(char[] password,String inputfile,String outputfile){
        try{
            // Create PBE parameter set
            PBEParameterSpec pbeParamSpec = new PBEParameterSpec(salt, count);
            PBEKeySpec pbeKeySpec = new PBEKeySpec(password);
            // create secretkey
            SecretKeyFactory keyFac = SecretKeyFactory.getInstance("PBEWithMD5AndDES");
            SecretKey pbeKey = keyFac.generateSecret(pbeKeySpec);
            // create cipher
            Cipher pbeCipher = Cipher.getInstance("PBEWithMD5AndDES");
            pbeCipher.init(Cipher.ENCRYPT_MODE, pbeKey, pbeParamSpec);
            // read input
            FileInputStream fis = new FileInputStream(inputfile);
            byte[] input = new byte[fis.available()];
            fis.read(input);
            // encrypt
            byte[] output = pbeCipher.doFinal(input);
            // write encrypted output
            FileOutputStream fos = new FileOutputStream(outputfile);
            fos.write(output);
            return true;
        catch(Exception e){
            System.out.println(e.toString());
            return false;
}This is the decrypt part
import java.io.FileInputStream;
import java.io.FileOutputStream;
import javax.crypto.Cipher;
import javax.crypto.spec.PBEKeySpec;
import javax.crypto.spec.PBEParameterSpec;
import javax.crypto.SecretKey;
import javax.crypto.SecretKeyFactory;
public class PWBDecryption {
    // Salt
    static byte[] salt = {
        (byte)0xc7, (byte)0x73, (byte)0x21, (byte)0x8c,
        (byte)0x7e, (byte)0xc8, (byte)0xee, (byte)0x99
    // Iteration count
    static int count = 20;
    public PWBDecryption() {
    // params:
    // password   -> the pasword used to create the key
    // inputfile -> the file containing the decrypted data
    // i.e. encrypt.txt
    // outputfile -> the file that will contain the decrypted data
    // i.e. decrypt.txt
    public static boolean doIt(char[] password,String inputfile,String outputfile){
        try{
            // Create PBE parameter set
            PBEParameterSpec pbeParamSpec = new PBEParameterSpec(salt, count);
            PBEKeySpec pbeKeySpec = new PBEKeySpec(password);
            // create secretkey
            SecretKeyFactory keyFac = SecretKeyFactory.getInstance("PBEWithMD5AndDES");
            SecretKey pbeKey = keyFac.generateSecret(pbeKeySpec);
            // create cipher
            Cipher pbeCipher = Cipher.getInstance("PBEWithMD5AndDES");
            pbeCipher.init(Cipher.DECRYPT_MODE, pbeKey, pbeParamSpec);
            // read input
            FileInputStream fis = new FileInputStream(inputfile);
            byte[] input = new byte[fis.available()];
            fis.read(input);
            // encrypt
            byte[] output = pbeCipher.doFinal(input);
            // write encrypted output
            FileOutputStream fos = new FileOutputStream(outputfile);
            fos.write(output);
            return true;
        catch(Exception e){
            return false;
}runner
public class RunRun {
    public RunRun() {
    public static void main(String args[]){
        char password[] = {'q','w','e','r','t','y'};
        boolean enc = PWBEncryption.doIt(password,"C:\\original.txt","c:\\encrypt.txt");
        System.out.println("Encryption status == "+enc);
        boolean dec = PWBDecryption.doIt(password,"c:\\encrypt.txt","c:\\decrypt.txt");
        System.out.println("Decryption status == "+dec);
}

Reading text file and output (to stdout) a list of the unique words in the

Hi,
I have a main method as
main.java
package se.tmp;
public class Main
public static void main( String[] args )
WordAnalyzer.parse( args[0] );
and text file as
words.txt
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the quick brown fox jumps over the lazy dog
the requirement is like
I need create this WordAnalyzer class, implement the parse method, and then commit the file. This method takes a single parameter, the filename of the file to parse. The method should read this file and output (to stdout) a list of the unique words in the file along with the number of times each appears in the file.
Can anyone please help me on this?
Thanks.

Where are you having problems?

Reading integers from a .txt file and computing means

I have a program that uses for loops to produce ten integers (1-10) are returns the average mean, geometric mean, and harmonic mean.
Now i need to change this program to read integers from a .txt file and return the same data. Basically i need to change my for statements that are incrementing to read the text file.
Thanks guys.

You haven't asked a question. You haven't posted code. What are you expecting here?
But I guess I'll take a stab at it and say you should look at the Scanner class
http://java.sun.com/javase/6/docs/api/java/util/Scanner.html
or BufferedReader
http://java.sun.com/javase/6/docs/api/java/io/BufferedReader.html
I'll never understand what makes people come to the forums, create an account, and ask a lazy question, when they could get a great answer much quicker through Google.
http://www.google.com/search?q=java+file+input (hint: look at the second search result)

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the rows? Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.

The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ

I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file

I have dragged 2 files to the trash bin but I cannot delete them from the trash bin. It keeps telling me these files are in use when they are not. How do I delete these files? One is a txt file and the other is an xls file

From the Finder menu select 'Secure Empty Trash'. If this or the suggestion above doesn't resolve the problem take a look at the various suggestions in this link:
http://www.thexlab.com/faqs/trash.html

How can I input read a line from a file and output it into the screen?

How can I input read a line from a file and output it into the screen?
If I have a file contains html code and I only want the URL, for example, www24.brinkster.com how can I read that into the buffer and write the output into the screen that using Java?
Any help will be appreciate!
======START FILE default.html ========
<html>
<body>
 
<center>

Welcome to a DerekTran's Website! 
Underconstructions.... 
 </center>
 
Hello, 
 
I've been using the PWS to run the website on NT workstation 4.0. It was working
fine. 
The URL should be as below: 
http://127.0.0.1/index.htm or http://localhost/index.htm
And suddently, it stops working, it can't find the connection. I tried to figure
out what's going on, but still NO CLUES. Does anyone
know what's going on? Please see the link for more.... I believe that I setup
everything correctly and the bugs still flying in the server.... 
Thank you for your help.

PeerWebServer.doc
 
CannotFindServer.doc
 
HOSTS file is not found
 
LMHOSTS file
 
How to Setup PWS on NT
 
Issdmin doc
Please be patient while the document is download....
 If you have any ideas please drop me a
few words at [email protected] 
 
 

 
</body>
</html>
========= END OF FILE ===============

Hi!
This is a possible solution to your problem.
import java.io.*;
class AddressExtractor {
 public static void main(String args[]) throws IOException{
 //retrieve the commandline parameters
 String fileName = "default.html";
 if (args.length != 0) fileName =args[0];
 else {
 System.out.println("Usage : java AddressExtractor <htmlfile>");
 System.exit(0);
 BufferedReader in = new BufferedReader(new FileReader(new File(fileName)));
 StreamTokenizer st = new StreamTokenizer(in);
 st.lowerCaseMode(true);
 st.wordChars('/','/'); //include '/' chars as part of token
 st.wordChars(':',':'); //include ':' chars as part of token
 st.quoteChar('\"'); //set the " quote char
 int i;
 while (st.ttype != StreamTokenizer.TT_EOF) {
 i = st.nextToken();
 if (st.ttype == StreamTokenizer.TT_WORD) {
 if (st.sval.equals("href")) {
 i = st.nextToken(); //the next token (assumed) is the '=' sign
 i = st.nextToken(); //then after it is the href value.
 getURL(st.sval); //retrieve address
 in.close();
 static void getURL(String s) {
 //Check string if it has http:// and truncate if it does
 if (s.indexOf("http://") > -1) {
 s = s.substring(s.indexOf("http://") + 7, s.length());
 //check if not mailto: do not print otherwise
 if (s.indexOf("mailto:") != -1) return;
 //printout anything after http:// and the next '/'
 //if no '/' then print all
 if (s.indexOf('/') > -1) {
 System.out.println(s.substring(0, s.indexOf('/')));
 } else System.out.println(s);
}Hope this helps. I used static methods instead of encapsulating everyting into a class.

How to search a special string in txt file and return it's position in txt file?

How to search a special string in txt file and return it's position in txt file?

I just posted a solution for a similar question here: http://forums.ni.com/ni/board/message?board.id=170&view=by_date_ascending&message.id=362699#M362699
The top portion can search for the location of a string, while the bottom portion is to locate the position of a character. Both can search for a character.
The position of the character within the file is displayed in the indicator(s).
R

How can i open a DOC or TXT file and insert the data into table?

How can i open a DOC or TXT file and insert the data into table?
I have a doc file . the doc include some columns and some rows.(for example 'ID,Name,Date,...').
I'd like open DOC file and I'd like insert them into the table with same columns.
Thanks.

Use the SQL*Loader utility or the UTL_FILE package.

Printing messages in Log File and Output File using Dbms_output.put_line

Hi,
I have a requirement of printing messages in log file and output file using dbms_output.put_line instead of fnd_file.put_line API.
Please let me know how can I achieve this.
I tried using a function to print messages and calling that function in my main package where ever there is fnd_file.put_line. But this approach is not required by the business.
So let me know how I can achieve this functionality.
Regards
Sandy

What is the requirement that doesn't allow you using fnd_file.put_line?
Please see the following links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Dbms_output.put_line+AND+Log+AND+messages&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=%22dbms_output.put_line+%22+AND+concurrent&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Scanning .txt file and outputting results?

Similar Messages

Maybe you are looking for