Start up code

Is it possible to write a startup code that access a data base
and populates a java class (like hashtable) that can be loaded
into the memory (when the server starts) and this global
variable then can be access by all the java class (EJB,
Servlets, JSP).
Prasanna

IF this was only for servlets, you would put this in the init()
of one of the servlets....and then use the deployment descriptor
for the servlet to make sure it auto-deployed...
But this would not be much good for an ejb. For the entire
application, the only thing would be an application-client. Put
your code in the client. Make sure the client auto-deploy's by
configuring the orion-application.xml tag client-module. Make
sure there is a user specified for auto-deploy to work.
Now you can access the java class with jndi
to "comp/clientjavaname" from any code in your app, ejb's,
jsp's, or servlets.
Regards,
the elephantwalker
www.elephantwalker.com

Similar Messages

"This device cannot start. (Code 10)" 6th gen nano ?

Hello!
I recently purchased a used ipod nano 6th gen. It was working great by itself but it won't connect to my laptop. Here's the short story:
Ipod worked fine out of the box. Is not recognized by Windows7. Installed and reinstalled the driver, no effect. iPod does not charge from the laptop of from the power outlet. I have itunes version 11.2.2.3 but the ipod has not been able to connect or be recognized by itunes yet.
Here's the Long story w/ the details:
1. Before I connected it to anything with the cable, I was able to use all of the features and played the radio it worked fine.
2. It began to give the low battery warning.
3. I plugged it into my laptop with the usb cable for the first time.
4. Windows (7) gave the error window pop-up: "USB Device not Recognized."
5. If I click on that error pop-up window the next window says "Windows has stopped this device because it has reported problems. (Code 43)"
6. If I open Device Manager, it shows one of the USB ports name is "Unknown Device". If I leave the nano plugged into the USB, the device manger window appears to update every 10s or so and alternates between displaying the port name "Unknown Device"and not displaying the port named "Unknown Device".
7. If I click on device properties of the "Unknown Device" USB port from the Device manager screen, I see that the error also alternates between "Windows has stopped this device because it has reported problems. (Code 43)" and "Currently, this hardware device is not connected to the computer. (Code 45)"
8. When attached to the USB port the nano screen alternates between 3 displays, 1 - "low battery", 2 - the apple logo, 3 - the home menu, which is operational. The battery meter symbol shows 0 power and does not indicate charging.
9. If I unplug the nano it does not turn on with the sleep/wake button, I think due to depleting the battery.
10. If I plug the nano into the wall charger, the screen alternates between the home menu which is operational and the apple logo. The battery symbol shows 0 power and does not indicate charging.
11. I followed some troubleshooting steps, on the "Device Properties" window I see the following information:
Driver Provider: Microsoft; Driver Date: 6/21/2006; Driver Version: 6.1.7601.18328;
12. If I select "Driver Details" button, a window appears that says"No Driver files are required or have been loaded for this device"
13. I found trouble shooting steps on the apple website to install the driver, which I followed. I navigated to the folder with the driver as recommended from the apple website and selected it. C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers "usbaapl", then selected "Apple iPod USB Driver" from the list to install.
14. I get the error window titled "Update Driver Warning" which explains installing the driver is not recommended as Windows cannot verify it is compatible with my hardware, but I proceed with "yes".
15. Next window titled "Update Driver Software - Apple Modbile Device USB Driver" shows the error "Windows encountered a problem installing the driver software for your device; Windows found driver software for your device but encountered an error while attempting to install it; Apple iPod USB Driver; This device cannot start. (Code 10)" and it suggests to download a new driver.
16. Next, I uninstalled the driver and followed all of those steps and it indicated success, also chose delete driver software option.
17. If I plug in the nano at this point I get the indication windows is trying to install driver software, and then the same error occurs as when I first plugged it in "USB Device not Recognized." and I can go through all of the steps again.
18. The Driver details button gives the following info:
Provider: Apple, Inc.; File Version: 1,64,0,0; file names usbaapl.sys & usbaaplrc.dll; driver version 6.0.9999.65.
19. Now the device manager window alternates between showing and not showing the USB port named "Apple Mobile Device USB Driver".
20. If I look under Devices and Printers, it shows a generic icon with the title "Apple Mobile Device USB Driver" with a yellow exclamation mark and the status shows "Needs troubleshooting"!
Can anyone help me I will give you any detail and info you want!
thanks!
steve

Hi: You need to download and install this graphics driver... This package provides the AMD video drivers and control panel for the supported notebook models that are running a supported operating system. File name: sp57199.exe

IPad2 on Windows 7 : MTP USB Device = This device cannot start. (Code 10)

Hi Guys,
I want to access to the Internal Storage of my iPad 2 on Windows 7.
But I have an error with the MTP USB Device => This device cannot start. (Code 10)
So I cannot see my iPad in Windows Explorer.
I tried many actions from Forums :
update the driver to the "Apple Mobile Device USB Driver" located in "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers"
delete the upper and lower filters in REGEDIT : {36FC9E60-C465-11CF-8056-444553540000}.
stop and restart the service "Apple Mobile Device"
But as soon as I connect again the iPad there is the same error message after Installing device driver software => "Device driver software was not successfully installed" : MTP USB Device : Fail
Is there someone who get the solution ?
Thank you for you help
Stephane

I have a similar problem, only mine is Code 31 for the MTP USB Driver. The Apple driver loads fine, and I'm able to sync with iTunes, but I can't connect to the device as a drive and copy the photos off of it.
I've tried nearly everything at this point that has been suggested in other threads, and nothing has seemed to work.

Bootcamp bluetooth driver issue ("This device cannot start. (Code 10)")

Hi everyone,
I have a problem (re)pairing my Apple mighty mouse with Windows 7 under Bootcamp.
Initially I had my mouse working through updating the driver to the one from Apple as is described on various forums.
After rebooting my laptop the mouse didn’t connect anymore. So I tried to repeat updating the driver to the apple one. But this time it didn’t work.
I then updated the Bootcamp drivers from the OSX installation disc.
Then, when I checked the hardware, it showed:
Apple Built-in Bluetooth
Microsoft Bluetooth Enumerator
Under these setting my computer still doesn’t detect my mouse under windows.
So I checked to see if I could update my drivers again. This time there were four instead of two:
Apple Broadcom Built-in Bluetooth version 3.1.0.1 [23-11-2009]
Apple Broadcom Built-in Bluetooth version 4.0.0.1 [27-4-2011]
Apple Built-in Bluetooth
Apple Built-in BluetoothDFU
First there were only the first two. Of these two, the first one worked for the first time I paired my mouse.
When I change the driver to any of the three other than the Apple Built-in Bluetooth, it says:
“Windows encountered a problem installing the driver software for your device” with this error:
“This device cannot start. (Code 10)"
After trying this, the initially set driver (Apple Built-in Bluetooth) gives the same error. Resulting in having to reinstall all the drivers all over again.
Anyone encountered the same problem or at least the error of “This device cannot start. (Code 10)"?
Thanks.

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

This device cannot start. (Code 10) - XtremeGamer

This device cannot start. (Code 0) - XtremeGamer? System Specs
Processor : Core 2 Quad Q9550 2.83 Ghz
Motherboard: XFX 780i SLI
Ram: 8 Gigs OCZ Reaper @ 800mhz
Video Card: EVGA GTX 260
Sound Card: XtremeGamer model: SB0730
Bios Revision: P08
Power Supply: OCZ GameXStream 850 Watt
OS: Windows Vista 64 Premium SP
Onboard Sound Disabled in Bios.
Problem
I installed the sound blaster into a brand new system with the specs above. Tried all the PCI slots, tried different bios versions, drivers that came on the cd and newest ones, different amounts of ram. However I still can't get the card to work just keep getting the error message "This device cannot start. (Code 0)". Any ideas?
Message Edited by Kaelan on 02-04-2009 :4 [email protected]

Kaelan wrote:
Picture if it helps http://img443.imageshack.us/img443/575/errormsglv3.jpg
I've tried enabling/disabling UAC.
I've run the drivers as an admin.
I've formatted a few times just to make sure no driver conflicts.
Also I've tested the card on another PC running XP sp3 works fine.
PCI slot works fine as well tested with an ethernet card.
You've tried about everything.
Did you try to disable any non essential onboard devices (HD Audio, LAN, additional SATA/IDE controller etc)?
What about installing XP on a spare dri've?

WinUsb "Device cannot start. (Code 10)"

Heya,
Well, usually i end up solving my bugs alone after a few hours working on it but it seems i cant get away with this one.
Im trying to install winusb as a driver for an USB device i made, but right after the installation i get a message saying "This device cannot start. (Code 10)". When i check the device properties though (through device manager), WinUsb.sys is defined
as the device driver.
Beside, when i check the device with USB Device Viewer, i get this :
[Port1] : My Product
---===>Device Information<===---String Descriptor for index 2 not available while device is in low power state.
ConnectionStatus:
Current Config Value: 0x00 -> Device Bus Speed: Full
Device Address: 0x03
Open Pipes: 0
*!*ERROR: No open pipes!
===>Device Descriptor<===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0200
bDeviceClass: 0x00 -> This is an Interface Class Defined Device
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40 = (64) Bytes
idVendor: 0xFFFF = Vendor ID not listed with USB.org as of 02-15-2012
idProduct: 0xFFFF
bcdDevice: 0x0100
iManufacturer: 0x01
String Descriptor for index 1 not available while device is in low power state.
iProduct: 0x02
String Descriptor for index 2 not available while device is in low power state.
iSerialNumber: 0x03String Descriptor for index 3 not available while device is in low power state.
bNumConfigurations: 0x01
Which is weird because windows actually CAN read string descriptors, since the name of the product and other strings are displayed correctly in device manager.
Here is the .inf file i used for driver install. (Created from USB Application project template in WDK 8.1)
; USBApplication1.inf
; Installs WinUsb
[Version]
Signature = "$Windows NT$"
Class = USBDevice
ClassGUID = {88BAE032-5A81-49f0-BC3D-A4FF138216D6}
Provider = %ManufacturerName%
CatalogFile=USBApplication1.cat
; ========== Manufacturer/Models sections ===========
[Manufacturer]
%ManufacturerName% = Standard,NTAMD64
[Standard.NTAMD64]
%DeviceName% =USB_Install, USB\VID_FFFF&PID_FFFF
; ========== Class definition ===========
[ClassInstall32]
AddReg = ClassInstall_AddReg
[ClassInstall_AddReg]
HKR,,,,%ClassName%
HKR,,NoInstallClass,,1
HKR,,IconPath,%REG_MULTI_SZ%,"%systemroot%\system32\setupapi.dll,-20"
HKR,,LowerLogoVersion,,5.2
; =================== Installation ===================
[USB_Install]
Include=winusb.inf
Needs=WINUSB.NT
[USB_Install.Services]
Include=winusb.inf
Needs = WINUSB.NT.Services
;AddService=WinUsb,0x00000002,WinUsb_ServiceInstall
[USB_Install.Wdf]
KmdfService=WINUSB, WinUsb_Install
[WinUSB_Install]
KmdfLibraryVersion=1.11
[WinUsb_ServiceInstall]
DisplayName = %WinUsb_SvcDesc%
ServiceType = 1
StartType = 3
ErrorControl = 1
ServiceBinary = %12%\WinUSB.sys
[USB_Install.HW]
AddReg=Dev_AddReg
[Dev_AddReg]
; By default, USBDevice class uses iProduct descriptor to name the device in
; Device Manager on Windows 8 and higher.
; Uncomment for this device to use %DeviceName% on Windows 8 and higher:
;HKR,,FriendlyName,,%DeviceName%
HKR,,DeviceInterfaceGUIDs,0x10000,"{6cdbce05-4bbf-4ab5-8e75-bcd65e13c088}"
[USB_Install.CoInstallers]
AddReg=CoInstallers_AddReg
CopyFiles=CoInstallers_CopyFiles
[CoInstallers_AddReg]
HKR,,CoInstallers32,0x00010000,"WdfCoInstaller$KMDFCOINSTALLERVERSION$.dll,WdfCoInstaller","WinUsbCoInstaller2.dll"
[CoInstallers_CopyFiles]
WinUsbCoInstaller2.dll
WdfCoInstaller$KMDFCOINSTALLERVERSION$.dll
[DestinationDirs]
CoInstallers_CopyFiles=11
; ================= Source Media Section =====================
[SourceDisksNames]
1 = %DiskName%
[SourceDisksFiles]
WinUsbCoInstaller2.dll=1
WdfCoInstaller$KMDFCOINSTALLERVERSION$.dll=1
; =================== Strings ===================
[Strings]
ManufacturerName="MySelf"
ClassName="Universal Serial Bus devices"
DiskName="USBApplication1 Installation Disk"
WinUsb_SvcDesc="WinUSB Driver"
DeviceName="USBApplication1 Device"
REG_MULTI_SZ = 0x00010000
Hope you guys can help me ! Thx

Hello Doron,
thanks for your answer.
did you change the hardware id in the inf to match your device?
d -- This posting is provided "AS IS" with no warranties, and confers no rights.
Yes i did, its a temporary ID, just for testing.
also, how did you install the inf? If with devcon, make sure to use the update option, not install
d -- This posting is provided "AS IS" with no warranties, and confers no rights.
Yea, I installed it via the update option.
Finally found out what was wrong. The bug was in the firmware program. I moved out to an other library, it works now !

This device cannot start. (Code 10) Status Device Power Failure for Intel (R) Audio Display

Hi I just bought HP Envy M7 Sleekbook last week and upgraded from 8.0 to 8.1 for Windows 8.
Now I have no sound and this is the error message I get:
This device cannot start. (Code 10) Status Device Power Failure (for Intel (R) Audio Display)
under Sound, Vieo and Game Controllers in the Device Manager.
Anyone else having this issue after upgrading?
Getting a new lappy is stressful enough but to alreay have issues is ridiculous
If the upgrade is not the issue could something have happened in transit? (I have an issue with the way Best Buy packed it for shipment and wonder if it could have been compromised)
Any help is appreciated. Or should Ibe taing this back to best buy and have them address it?
Thanks
Pam

Ahmed, if your HP Envy has an Intel processor chances are it will be necessary to download new drivers for both sound and chipset due to compatibility issues with Windows 8.1. After 4-1/2 hours on the phone with various technical agents and a lot of frustration I finally got one who had the knowledge and training to resolve my issue. I believe he downloaded the new drivers from the HP support site. Good luck!!

Ideapad U350 Light Sensor (This device cannot start. Code 10) in Windows 7

After I installed Windows 7 (32bit), everything works fine. However I am getting a yellow mark in Device Manager for the Light Sensor (Ambient Light Sensor). If you look closely, it says "This device cannot start. Code 10".
I have search the Lenovo site but I cannot find the driver, drivers for other hardware devices are available here
http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=61415
Is a Windows 7 driver for ALS available from Lenovo? If not, does anyone know who is the manufacturer for the ALS component?
Also where can I download the following software for Windows 7 that is pre-installed into Vista?
Lenovo OneKey Recovery
ReadyComm
Veriface

help i have the same problem, but i am in Vista 32bits, i cannot even see the light sensor in the device manager!!
where can i download the drivers for vista?

Sound card problem - This device cannot start. (Code

hi all,
here's my situation...
i had a dell dimension 4400 that came with a sound blaster li've! value(wdm) sound card. i recently got a new motherboard/case etc. i transferred the sound card to my new system and i get a "This device cannot start. (Code 0)" error when i check device manager. for some reason, the game port on the sound card is working fine, but the audio processor part has the error. windows recognizes the card, but it won't use it. the card is a little over 3 years old.
now, i've read the forums, tried a clean install, registry tweaks, changed bios settings, even did a hd format. i also tried different pci slots. i have sp2 and all my other drivers are updated.
the new motherboard i have is a gigabyte 8ipe000g. i already contacted gigabyte, did not get much help. it has onboard ac97 audio. i disabled the onboard audio, but it did not seem to change anything. i have also tried windows drivers, the dell drivers from the cd, and the drivers from the creative website. none of them changed anything. i am now having trouble removing the drivers from add/remove programs. i keep removing them, but they still remain, even after using the wdm driver remover from the cd (a file named ctapxx.exe, or something similar). it's almost like windows is not actually installing the drivers when i install them. i'm wondering if the code 0 error is specifically driver related.
the first time i disabled the onboard audio and updated the drivers a weird thing happened. every time i started the computer up it would crash when it got to the desktop. it no longer does this for some reason, everything now starts up, but i have no audio. the sound card is the only device giving me problems on my system.
is there anything else i need plugged into the sound card? all i have is the sound card plugged into the pci slot, and an audio cord going from the card to my dvd dri've. is there anything that is supposed to go from the card directly to the motherboard? as far as i can tell, i have everything hooked up correctly. i don't understand why the game port works, but not the audio processor.
so, i have basically tried everything. seems like quite a few people get code 0 errors with some sort of hardware they have, but it usually seems like there is no definite solution.
does anyone have a similar problem, or a solution? hopefully i don't have to get a new sound card. i would just stick with my onboard audio, but i hear it can cause problems with games.

Since you have a new board it maybe a bios setting.
Is there IRQ conflict from the soundcard.
Maybe remove the card and unistall the software, use a tool "driver cleaner pro" to remove all creative files.
Check your mainboard manual on what pci slot that dont share, i hear slot 3 is the one to use, i use slot 5.
Fit the card and reinstall.
Best of luck.

BW-ABAP start routine code logic

Hello friends,
I am writing start rotine code between ODS and InfoCube.I need your help determining the right logic.
Requirement is as follows.
1. Create one database table to store GL account ranges.
2. This table will have multiple ranges of GL account.
3. Write a code such a way that only GL acc. range in this table is included and
    all the other records containing GL acc. outside this range should be deleted.
Here is the logic which I have developed.
Please help me with your suggestion.
Message was edited by:
        John Anderson

Hi John,
   I did not check the syntax of this program and I am very bad at remembering the syntax. Let me know if you face any problem with the code I am supplying.
Code removed ....
Best Regards,
Kazmi
Message was edited by:
        Kazmi

This device cannot start. (Code 10) Intel (R) 82566MM

Ok guys I hope someone can help me with this annoying issue. Just today I clicked "undock Computer" and had to reboot becaues of some funky error message. When the machine came back on the LAN connection would no longer connect. Now under the status it just has the following:
This device cannot start. (Code 10)
Click Troubleshoot to start the troubleshooter for this device.
Any ideas?
Message Edited by Riekal on 12-22-2008 09:58 PM

Code 10 is a default error code that Device Manager generates when the operating system cannot determine which specific error code to return after an issue occurs.
Problem
The problem can range from hardware failure to software config.
Here is the MS article with further info on code 10 here.
Solution
Updating the Driver could solve the issue is some cases.
Visit Lenovo.com to download and install Ethernet latest driver.
Troubleshooting
If you have the factory install(if you haven't installed your own windows on unit), you should be able to access the recovery partition by pressing the blue ThinkVantage Button in the top left hand corner of the keyboard when the computer show the Thinkpad screen(when computer is first coming on) -> further info on accessing partition here.
Once in the recovery partition you can click "open browser" to attempt to connect to the internet there. The recovery partition has a completely different set of settings and drivers to use for the Ethernet device. If you can access the internet here than the problem is definitely with the software.
There is a "diagnose hardware" option on the left as well that allows you to run PCdoc to test hardware as well.

This device cannot start. (Code 10): is the message i get on my Pavilion Dv7-

There is a yellow tag on the Ads Instant HDTC PCI in the device manager. when I check the details I recieve this message:
This device cannot start. (Code 10)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
When I check fr solutions it says this device is installed properly.. Can anyone help?

Right click on it select uninstall >> clcik on Action > scan for hardware changes. >> drivers will be reinstalled >> restart the PC
if you have internet connection then right click on it and select update drivers.
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Seq starting time-code

Is there a way to change an existing timelines starting time-code without having to make a new sequence and drag dropping my footage into that seq??

Hiya,
If you go to FCP main menu>FinalCutPro>User Preferences>Timeline Option you can see that you can change the timeline starting timecode but that will not affect existing sequences. Changes will affect only new sequences.
G.

Game Port Error: This device cannot start. (Code

I recently did a PC rebuild and have a fresh install of XP SP2. When trying to play with a gamepad that worked just fine before the reinstall of XP, it shows the game port as not working.
Sure enough, Device Manager shows a problem with the game port.
I uninstalled the game port and reinstalled it to no avail.
This is the error the properties of the game port has listed:
This device cannot start. (Code 0)
Anyone have any idea how to fix this - I saw several posts in this forum from some time ago with no answers.
Thanks in advance!

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

Satellite P200-1FC: CD/DVD drive will not start - error Code 10

My Satellite P200-1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD Drive is listed in device manager as "TSST corp CDDVDW TS-L632H ATA Device".
At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
Clicking check for solutions produces "could not load driver software" but no solution.
Searching similar questions in user forums suggests a use of a Microsoft Help & Support page headed "The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".
However this involves modifying the registry! As a relative novice I am reluctant to do this unless I can find no easier way.
Must I bite the bullet and and enter this minefield, or is there a better way?

>At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
This error is definitely caused by a wrong registry entry.
I had such error several times ago and I have solved it removing the lower and upper filters from these registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Here are some steps how it worked on my Windows system;
- I removed the CD/DVD drive from the device manager
- Then edited the registry as described above
- Rebooted the notebook
Im sure it will help you too.
Bye

T22 ethernet card cannot start error code 10

i iust bought this computer trying i have t22 2647 m2u trying to find driver for ethernet card ive tried several drivers from different sights none seem 2 work all say cannot start error code 10 i tryed 3com mini pci card and and intel 10/100 sp mobile combo i have win xp sp 3 anything else you need to know email me sorry if didnt do something right on this im new at this posting

Welcome to the forum!
The problem here is most likely that there is no ethernet card installed, although there is a port in the back, since that's the way machine had left the factory:
Product: ThinkPad T22 2647-M2U [change]
Operating system: All [change]
Original description: PIII 900MHz (256KB), 128MB RAM, 20.0GB HDD, 14.1 XGA(1024x768) TFT LCD, 8x-2.3x DVD, Modem, TV out, Li-Ion battery, Win98SE
But don't worry, you can get a combo modem/LAN card for a few bucks nowadays.
Hope this helps.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Start up code

Similar Messages

Maybe you are looking for