Subscription Issue - Assembly could not be installed
Hi all
I am attempting to replicate a database based on 2008 R2 to an SQL 2012 server. I have successfully made a transactional distribution on the source server with the snapshot created. The issue is when I create a subscription in the destination
server, it seems to create ok but upon monitoring the subscription, an error is displayed with the message 'Assembly 'smdiagnostics' could not be installed because existing policy would keep it from being used.' Any idea on what this means and how I
can overcome this?
Thanks in advance.
Hi - thanks for your reply on this.
I have narrowed the problem to the functions we have in the database. In one or more of these functions, this dll is used. If I don't include the functions, it replicates OK up to the point of one or more of the SPs trying to reference said functions.
Then it fails (as it's supposed to, because the function are not part of the article setup).
Also, the folder which you have mentioned does not exist. However C:\Windows\assembly\SMDiagnostics.dll does (without
the GAC_MSIL) on both source and destination servers. Both are also version 3.0.0.0.
Subscription can be monitored on the source - this is where the error message is displayed, as well as on the subscription
sync status.
Both servers are running Windows Server 2008 R2.
Thanks.
Similar Messages
-
Add feature - assembly could not be found error 0x80073701
I am trying to install the SNMP service on this server - succesfully did this on an identical server.
Windows reports back "The request to add or remove features on the specified server failed. The reference assembly could not be found. Error 0x80073701"
This error has been posted in a few places on the forums so I have followed the advice which includes the following:
1) I have run a chkdsk and rebooted.
2) I have run the system file checker (sfc / scannow) and this reported no issues with system integrity.
3) I have run DISM /Online /Cleanup-Image /RestoreHealth. Reported repair made and I rebooted.
4) I have only the English language pack installed.
On inspecting the CBS log I see these errors, just a sample:
i)2014-03-24 14:49:57, Error
CSI 0000000d 2014/3/24:14:49:57.330 (F) base\wcp\componentstore\csd_locking.cpp(216): Error STATUS_SXS_ASSEMBLY_MISSING originated in function CCSDirectTransaction::LockComponent expression: (null)[gle=0x80004005]
ii)2014-03-24 14:49:57, Error
CSI 0000000e (F) STATUS_SXS_ASSEMBLY_MISSING #5681# from CCSDirectTransaction::OperateEnding at index 0 of 1 operations, disposition 2[gle=0xd015000c]
iii)2014-03-24 14:49:57, Error
CBS Failed to process single phase execution. [HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
iv)2014-03-24 14:49:57, Error
CBS Failed to perform operation.
[HRESULT = 0x80073701 - ERROR_SXS_ASSEMBLY_MISSING]
However I am still getting the same message. Can anyone advise how I should progress?
Many thanks for your input.Hi,
>>I am trying to install the SNMP service on this server
In fact, SNMP is deprecated. Instead, use the Common Information Model (CIM), which is supported by the WS-Management web services protocol and implemented as Windows Remote
Management.
However, we still can use SNMP service on Windows Server 2012. For double check, we can follow the blog below to check whether something is missing during installation process.
Install SNMP on Windows Server 2012
http://michaeljgirard.com/index.php/install-snmp-on-windows-server-2012/
Best regards,
Frank Shen -
I click on Firefox and it says that Firefox is installing your updates and will start in a few minutes. Then I get "The update could not be installed. Please make sure there are no other copies of Firefox running on your computer, and then restart Firefox to try again." this cycle never ends. Do I need to deinstall Firefox and re-install? If I do that, do i lose all of my bookmarks, etc?
See http://kb.mozillazine.org/Software_Update (Software Update not working properly)
Remove the files in the updates and updates\0 folder:
*C:\Documents and Settings\<user>\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates
*(%USERPROFILE%\Local Settings\Application Data\Mozilla\Firefox\Mozilla Firefox\updates)
*C:\Program Files\Mozilla Firefox\updates
*Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
*Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer. Do not remove personal data when uninstalling.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
You can skip the step to create a new profile, that is not necessary for this issue.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall -
SCCM 2012 - sms_notificaiton_server install fails, bgbisapi.msi could not be installed
Hi,
installed a SCCM 2012 R2 Primary site on a 2012 R2 server on the D: drive. Everything seemed to go well, however i am am now encountering issues with the SMS_NOTIFICATION_SERVER in that the site component manager is unable to install it. The status message
viewer informs me that, "Site Component Manager failed to install this component, because the Microsoft Installer File for this component (bgbisapi.msi) could not install."
When i check the Bgbsetup.log, i see the following lines:
<01/19/15 14:46:27> CTool::RegisterComPlusService: Failed to unregister D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/19/15 14:46:27> CTool::RegisterComPlusService: run command line: "C:\Windows\Microsoft.NET\Framework64\v4.0.30319\RegSvcs.exe" /extlb /tlb:"D:\Program Files\SMS_CCM\microsoft.configurationmanager.bgbserverchannel.tlb" "D:\Program
Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll"
<01/19/15 14:46:30> CTool::RegisterComPlusService: Failed to register D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll with .Net Fx 4.0
<01/19/15 14:46:30> Cannot register BGB server channel DLL D:\Program Files\Microsoft Configuration Manager\bin\x64\microsoft.configurationmanager.bgbserverchannel.dll. Installation cannot continue.
<01/19/15 14:46:30> Fatal MSI Error - bgbisapi.msi could not be installed.
Having done a bit of reading, it seems a few other people have come accross this issue before:
https://rikkoss.wordpress.com/2013/12/11/tip-do-not-change-the-default-installation-location-for-configmgr-2012/
http://www.windows-noob.com/forums/index.php?/topic/7401-sms-notification-server-failed-critical-sccm-sp1-sql-2012-sp1/
The solution for these folks seems to be to edit 2 files in the .Net folder,InstallUtil.exe.config and Regsvc.exe.config,
and insert the following code:
<runtime>
<loadFromRemoteSources enabled=”true”/>
</runtime>
However, this hasn't worked for me and i'm still getting stuck with the same error messages. Since i'd really like to avoid reinstalling SCCM on the C: drive, can anyone suggest any possible solutions to this issue?The MPsetup.log has this:
<01/20/15 16:28:11> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<01/20/15 16:28:11> Installing the SMSMP
<01/20/15 16:28:11> Passed OS version check.
<01/20/15 16:28:11> IIS Service is installed.
<01/20/15 16:28:11> No versions of SMSMP are installed. Installing new SMSMP.
<01/20/15 16:28:11> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<01/20/15 16:28:11> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80
USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<01/20/15 16:28:12> mp.msi exited with return code: 1603
<01/20/15 16:28:12> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<01/20/15 16:28:12> Fatal MSI Error - mp.msi could not be installed.
and the MPmsi.log has this:
MSI (s) (B0:E0) [16:37:14:660]: Invoking remote custom action. DLL: C:\WINDOWS\Installer\MSI23F6.tmp, Entrypoint: CcmRegisterPerfCounters
[16:37:14] @@ERR:25001
Internal Error 25001. 80070057
MSI (s) (B0!F8) [16:37:14:676]: Product: BGB http proxy -- Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
Had a go at removing the MP, disabled the UAC and reinstalling the MP. Same result unfortunately...The server is temporarily housed in a block GPO OU so group policy shouldn't be an issue. Thanks for all the help so far! -
Trying to install iTunes on my Laptop, running windows 7 (64-bit), but whenever I reach the end of the install, it pops up with an error telling me:
"Service 'Apple Mobile Device' (Apple Mobile Device) could not be installed. Verify that you have sufficient privileges to install system services"For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Hello everyone,
Give you a little background on the hardware/software which we are running to do a Windows 8.1 Deployment, we have an VM of Windows Server 2008 R2 with Windows Deployment Services installed and configured correctly. For the boot image it's a Windows 8.1
WIM and as for the Install Image we have a base image of Win 8.1 with all drivers installed for an HP EliteBook 8540w , we Syspreped and then capture the image using the W2K capture on PXE to capture and upload the image to the server. This is where we first
ran into the problem of connecting to the server and had to inject the lan drivers to have network connectivity. After the image was uploaded to the server, we thought to try and run a deployment of that image on an identical laptop. PXE boot into that Image,
it asks for domain credentials which are accepted it begins the installation process and fails at "Windows installation cannot continue because a required driver could not be installed"?
We just set up client logging on the server and it is useless it just says that the driver is missing, but what driver is missing? There are thousands, which one?
Another forum has this issue: http://social.technet.microsoft.com/Forums/windows/en-US/4cf0b378-09d0-4e0b-bc6e-3d898b668f98/during-deployment-windows-installation-cannot-continue-because-a-required-driver-could-not-be?forum=w8itproinstallHi,
Please first check the solution here:
Error: Windows installation cannot continue because a required driver could not be installed
http://support.brainwaregroup.com/kb/article/AA-00702/0/Error%3A-Windows-installation-cannot-continue-because-a-required-driver-could-not-be-installed.html
Also, please try to find out Setup logs from the client computer, and we can see the details in the Setup log:
If the failure occurs in Windows PE before the disk configuration page of the WDS client is completed, you can find the logs at the
X:\Windows\Panther folder. Use Shift+F10 to open a command prompt, and then change the directory to the location.
If the failure occurs in Windows PE after the disk configuration page of the WDS client is completed, you can find the logs on the local disk volume at the
$Windows.~BT\Sources\Panther folder. The local disk volume is usually the drive
C. Use Shift+F10 to open a command prompt, and then change the directory to the location.
Kate Li
TechNet Community Support -
I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
How can I verify the status of the HD, in absence of symptoms for my own information?mottoo wrote:
I have a 2009 MAC PRO 10.6.8. Had never had any problems. Tried installing Mountain Lion today. Was told, " Mountain Lion could not be installed because Hard Disk is broken"!
Is it because HD is broken or perhaps incompatible? Has any one else had this problem? I had no symptoms suggestive of a broken HD. Will I get reimbursed if ML could not be installed? If so what do I have to do?
How can I verify the status of the HD, in absence of symptoms for my own information?
The solution to your problem is rather simple
1: Get a external hard drive and use Disk Utility to format it with a GUID partition map and OS X extended Journaled.
2: Export your browser bookmarks and any other needed data to a file,. Copy your User data folders of Music, Pictures etc over to the external drive via drag and drop copy methods, disconnect the drive.
I don't advise using TimeMachine at this point since your boot drive is messed up, thus so will be your TM drive, just transfering the problem later on back to the new install. We are proceeding with a "Fresh install" method to eliminate as many issues as possible which a TM restore can return to a new OS X install.
3: Next you will need to follow these instructions to zero erase (important) and install 10.6 fresh, use the same named account (different password ok)
How to erase and install Snow Leopard 10.6
4: Before you return files or install programs, Software Update fully and use the AppStore to install 10.8, this way it will be on a fresh 10.6 install, free of issues.
5: Install any and all 10.8 compatible programs as much as possible before returning your User files, this is a performance measure.
If you need too, use this site to find one's that are 10.8 compatible.
http://roaringapps.com/apps:table
6: Last install your user files from the external drive backup into their respective Music, Pictures, Movies etc., folders, into the same named accounts so you preserve your iTunes playlists. When you open those programs, they will update their respective support files automatically. -
Adobe AIR could not be installed because another application is already being installed
OS Windows XP
If I try to start a new setup I receive the following message:
"Adobe AIR could not be installed because another application is already being installed. Complete the first installation before proceeding with this one."
This is the messagge when I try to remove Adobe Air 1.0 from Control panel:
"Another installation is already in progress. Complete that installation before proceeding with this install."
This is the log file:
[2011-04-08:19:59:21] Runtime Installer begin with version 2.6.0.19120 on Windows XP x86
[2011-04-08:19:59:21] Commandline is:
[2011-04-08:19:59:21] No installed runtime detected
[2011-04-08:19:59:23] Starting runtime install. Installing runtime version 2.6.0.19120
[2011-04-08:19:59:24] Installing msi at d:\docume~1\carlo~1.zan\locals~1\temp\air78.tmp\setup.msi with guid {AFF7E080-1974-45BF-9310-10DE1A1F5ED0}
[2011-04-08:19:59:27] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-04-08:19:59:27] Rolling back install of d:\docume~1\carlo~1.zan\locals~1\temp\air78.tmp\setup.msi
[2011-04-08:19:59:27] Rollback complete
[2011-04-08:19:59:27] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1618" errorID=5008]
[2011-04-08:19:59:28] Runtime Installer end with exit code 7
In the past I had problems with a virus and I removed some voices on regedit. I think I've combined some mistake.Hi,
I'm sorry you're having problems installing/uninstalling air. Have you tried rebooting to see if that resolves the issue?
If it still fails, can you enable MSI logging using the instructions found on the following page and then post the msi log contents for review?
How to enable Windows Installer logging
Thanks,
Chris -
I downloaded Mail Update for Mac OS X 10.5.6 and was told it could not be installed because it was from an unidentified developer. Tried installing download from MailUpdate & advised the disk did not meet the requirements for update. Expect it's due to being at 10.9.1. Mail is still teetering between dysfunctional and non-functional. Advice?
I'm not sure what "Mail Update for Mac OS X 10.5.6" is. Mac OS X 10.5.6 is Leopard, a system that is quite old at this point. There have not been any Mail updates for Leopard in quite some time. If you are trying to install some old Mail update for Mac OS X 10.5.6 in Mavericks, that won't work.
If you are trying to install the Mavericks Mail update manually, that's not necessary if you have updated through the App Store. If the App Store shows no updates, you don't need this. (The error message doesn't make sense, and may indicate some other problem with your system, assuming that you were downloading this update from Apple's site.)
I'd advise you to start a new topic in the Mavericks forum and describe the problems you are having with Mail. Be sure to include specifics, but try to avoid speculating on causes, as responses that may be related to an inaccurate assumption on your part can cloud the issue. -
Trying to download the free trial of Adobe Acrobat XL Pro. I keep getting the message "The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author." I've repeatedly tried getting a new installer file, but get the same message every time.
K_don52 and Ande8135 please remove your current installation of the Adobe Download Assistant and reinstall. You can find more details in the known issues section of Troubleshoot Adobe Download Assistant.
-
When downloading itunes to my pc, get error message 'Apple mobile device could not be installed - verify you have sufficient privileges to install system services'
i am forced to abort/cancel. Can anyone help please?Me too. And if someone comes back on here with the same solution of "uninstall and re-install", please provide further advice after you have done that 3 times and the program still has the same problem in addition to the "failure to load the C runtime library" R6034 issue. I have removed itunes 3 times however I do not have permission to remove the program files/apple file and the uninstall doesn't remove it.
You're not alone buddy.
Frustrated. -
I tunes tries to update over and over again to 10.2.2. Each time it fails and lists message"Service 'ipad service'could not be installed. Verify that you have sufficient privelege to install system services."
I have an iphone and use itunes to update it. I do not have an ipad if that is an issue. Is this problem related to apple, or to Windows vista? I am system administrator on Windows 7 so the problem must be related to apple. I would appreciate a clue as to what I need to do. Or are there sufficient problems with 10.2.2 that I should be happy it will not update? This problem is getting beyond annoying since i have work to do other than cater to apple itunes.I would say it is Windows.
Which are you using btw, Vista or 7?
And did you download the 64-bit version if that is what you run?
There were a lot of tips to troubleshoot (never needed to in 4 yrs though knock on wood).
Uninstall itunes
run chckdsk and sfc /scannow
CCleaner 3.05
If 7 did you upgrade to SP1? Driver Sweeper has been known to cause some problems with Windows 7 SP1
Trouble installing iTunes or QuickTime Windows
iTunes Troubleshooting quits, freezes, or launch issues -
E902: package could not be installed. Error in installing application
Hi All,
we try to deploy our first application(IPPhoneServicesTutorial)
we do it using designer 2.4.2.009 on application server cuae
2.4.2.009, and we get the following error:
E902: package could not be installed. Error in installing application
we check the application server log and this is the result:
Full information as follows:
Source: mscorlib
Message: Value cannot be null.
Parameter name: path1
Stack Trace:
at System.IO.Path.Combine(String path1, String path2)
at
Metreos.ApplicationFramework.Assembler.Assembler.DetermineWSE3Path()
at Metreos.ApplicationFramework.Assembler.Assembler..cctor()
2008:04:07::04:57:29(04): Error: AM
Application 'IPPhoneServicesTutorial' installation failed:
Application IPPhoneServicesTutorial failed to load.
2008:04:07::04:57:35(10): Info: MCP Unable to connect to media
server Media1 (127.0.0.1)
2008:04:07::04:57:50(17): Info: MCP Unable to connect to media
server Media1 (127.0.0.1)
2008:04:07::04:58:05(17): Info: MCP Unable to connect to media
server Media1 (127.0.0.1)
2008:04:07::04:58:20(18): Info: MCP Unable to connect to media
server Media1 (127.0.0.1)
note that the media server service always stoped automaticallyHi,
I am also getting the same error. I did one sample application in cuad. when i try to build my project the following error came:
Full error information as follows:
Source: mscorlib
Message: Value cannot be null.
Parameter name: path1Stack Trace: System.String Combine(System.String, System.String)
at System.IO.Path.Combine(String path1, String path2)
at Metreos.Max.Framework.ProjectBuilder.PackageApplication()
at Metreos.Max.Framework.MaxMainUtil.BuildProject(Int32& warningCount, Int32& errorCount)
at Metreos.Max.Framework.MaxMain.OnBuildProject()
Please help me regarding this.
Thanks,
Ajith -
Flash Installer cannot download. "Adobe Flash Player could not be installed."
Flash Installer cannot download. Finally get the message, "Adobe Flash Player could not be installed." I already uninstalled the old copy, now I have no Flash Player.
My issue was identical.... days of frustrating downloads and initializing but no installation........ UNTIL I chose to not use the default installer and chose 'Save File'. Now I have the latest Flash installed in OS 10.8.5 no problems !!
This time a long download of 16MB arrived in the downloads folder that actually worked.
Prior to this, all downloads were around 1.6MB and there was no .dmg in the package.
I got my download under where it says "Still having problems?"
Hope this helps you.
See the attached page for reference. -
The following Nuget packages could not be installed in project~
When i create a new azure cloud service project in VS, the VS
process fails with dialog message. See this error,
Windows Azure Tools for Microsoft Visual Studio
The following NuGet packages could not be installed in project
WebRole:
Microsoft.WindowsAzure.Caching (version ?.2.0.0?: Value cannot
be null.
Parameter name: path1
WindowsAzure.Storage (version ?.1.0.0?: Value cannot be null.
Parameter name: path1
I wanted to upload image, but the forum give me a tip:
Body text cannot contain images or links until we are able to verify your account.
So I have to paste the error in post.
I installed the azure SDK2.2 and VS2013. Can you tell me how to set the Path and how to solve issue?
Thanks!
Regards,Hi,
I have faced a similar issue.
It seems the installation was broken.
Solution would be to uninstall both VS 2013 and Azure SDK.
And then re-install them.
Note: Some times azure SDK web platform installer gives errors after installing some components. on that case you might need to run the web platform installer again to install remaining components.
If you found this post useful, Please "Mark as Answer"
and "Vote as Helpful".
Best Regards, Tuan Khalib
Maybe you are looking for
-
This happens regardless of the pdf file I am trying to open within a page using Firefox. My version of Firefox is updated (3.6.13). Please help!
-
Upgrading Mac Pro 3.1 (early 2008) worth it ?
Hi I was wondering if it´s still worth to upgrade my mac pro 3.1 (early 2008) ..... or I should sell it and buy maybe the mac pro 2010 or anything like that... my system is 2,8 Ghz 8-Core 8 gb 800 Mhz DDR2 ram Ati radeon 2600 (i think it slows every
-
How to read long line from text file
Hi, I just faced problem when reading a big text file. BufferedReader br = new BufferedReader(new FileReader("D:\\afile.txt")); String str; int i; while ((str = br.readLine())!=null) i++; //do some work here... ...This code throws exception: Exceptio
-
Can't burn a simple regular lengh movie (less than 120 mins long) in a dvd even if Im using a disc with enough capacity always have to split a regular movie file , for example if it last 90 mins the movie and try to burn it on the 120 mins DVD disc I
-
Credit against advance payment
Hi friends, I have an situation where the customer's are to be delivered / order created only if the advance payment is received from the customer. There are some set of customers who have a set credit limit upto which they can procure from the compa