The mouse pointer seems to change randomly from the usual pointer to the I-beam pointer, finger pointer, column resize pointer, arrow up pointer, etc. without any reference to function.
I actually don't care other than the fact that it isn't the way it should operate and everything else seems to behave. However, the I-beam pointer is hard to see and can disappear. It seems to happen mostly in Safari and then carry over to other applications. Anyone else see this happen?
The program you gave me was great, so simple, yet so effective....yet I still have a problem. The problem is that my interface has a giant TAB inside with lots controls. So I need it to be an arrow when it is in the tab but not on the other controls. I tried manipulating you program and used an if condition inside the event case that if the control reference of the event case is the same as the control reference of the tab then remain an arrow. That works for other controls outside the tab and and the tab itself but it doesn't work with controls inside the tab...... I have attached your vi, just changed a little to see what i am saying. I am pretty sure there must be a way around it so i am trying it out now, but if you know something already that might help, that'll be great
Reza Sed
Attachments:
Default Cursor_modified.vi 38 KB
Similar Messages
-
I have an Adobe Flash Professionals digital classroom book and was following all steps easily until it ask me to select the text tool and change it from classic to tfl in the property inspector. I looked and all that drops down is dynamic, static, and input. Where is the TFL and Classic ? I watched adobe learning center but he was using CS5. Can anyone please help?
Hi,
Do you use Flash CS6 to follow the instructions in the classroom book? If yes, then you can find it under text drop down for an AS3 Document as shown below
If you follow the instruction in Flash CC or Flash CC2014 then you will not find this option as this is deprecated.
Thanks!
Mohan -
On my Mac desktop I must have changed a setting so that now when I move the mouse the open windows fly off to the sides and I can't see them. They come back when I move the mouse, but it is so annoying. How can I make the windows not disappear like that?
Click on the Hot Corners.. button and look at the four definitions. In the picture below, if you moved the cursor to the right top of the screen, it would slide all the applications off the screen as you describe and show the desktop. Set it to "-" to deactivate.
-
I have an issue where coloured dots (small squares) appear on my screen and it gets to the point where the entire screen freezes although the mouse still moves but nothing works and I need to turn the computer off at the switch. It doesn't happen all the time but is very annoying. Any ideas?
Reset the SMC and PRAM, if the issue continues then you likely have a failing GPU (hardware) that requires repair. To be sure take it in and have it professionally assessed.
Intel iMac SMC and PRAM resets -
My Finder keeps grabbing over 100% of the CPU which seems to stop me from opening any folders.
Only quitting the Finder from Activity monitor resets it to normal.
Any ideas?Nope, I don't have a "/Users/charon/Library/Mobile Documents" directory, let alone anything underneath it. Is that like an iCloud thing or something? I tend to avoid the Apple-supplied services when I can (I don't use iTunes either unless I can help it).
As an update, as of about two days later this problem seems to have solved itself. Possibly sleeping and waking did something to it (though that seems unlikely given how many times I rebooted), or else there was just some long-*** kernel process that finally worked itself out. But my system CPU is back down to normal and the cursor freezes are gone.
??? it is a mystery! ??? -
I have just downloaded ML. I can get my email via iCloud, but I can't get it on MAIL 6.0. I have done the JAVA thing--seems to be OK. MAIL 6.0 on my desktop won't sync with Mobile Me and won't download emails. Any suggestions?
Just did something--am not sure what, probably in the "iCloud"--but seems to be working at last!
-
I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about: so I don't loose any of my photos/keywords? Who can help?
The Bridge General Discussion can give you the specifics of transferring your information over to Bridge CS6.
-
i created a form using acrobat XI pro. SOME users of the form cannot save the form. what can i do from my side to 'correct' the issue?
Do you know what PDF viewer those users were using? Do you have any more details about what happens when they attempt to save?
-
i want to turn my macbook air off. the shut down button already appeared but the mouse/cursor just hang and won't work. even after pressing the enter button to shut my mac off won't work. what will i do?
This is not a reply. I just want to elaborate on this problem.
My computer freezes occasionally when it is used after being sleep for a while. The spinning ball appears and everything is totally disabled. Nothing on the keyboard works.
The mouse moves, but does not work.
The only solution is to turn the power off and on (losing all data in open applications.)
I kept the System monitor running on the side to find out which program was running when the computer froze. The Monitor as well as all other applications froze, but the data showed:
Firefox 18.4%
Activity Monitor 0.9%
Firefox Plugin 0.2%
This is all the information I have. By the way, I am using iMac with OS 10.6. -
G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already, nothing ,.. Ppc g4 Mac
Should I check the memory cards themselves? Reseat them?
Yes.
Memtest X or Rember to test the RAM.
Reseat is also good.
The iPhone 4 doesn't like USB 1.1 much.
after the update the computer was working well, except for this freeze when ever I connect iPhone.
I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
Never an issue.
Can't say the same for USB 1.1.......
The above (previous post) linked PCI card is cheap enough.
Want cheaper, try this:
http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
OS X has native NEC chipset USB support. -
I made a mistake and changed my iTunes country to Canada when I live in the U.S. I tried changing my password and doing it on the computer, but it doesn't work. What else should I do? Thanks
Try rebooting and then try it. If it continues contact iTunes store support because it may be an error inside their system.
-
My laptop had water spilled on it 3 days ago, I let it sit as instructed by best buy . I am on it right now but the mouse movement isn't smooth anymore and it is slower. The first time I turned it on it didn't respond at all,can anyone tell how bad the damage really is without actually seeing it ? Do you think maybe it will be just a simple repair or am I looking at a whole new logic board?
Until you take it in so that a technician can look at it, it is all guessing and nothing more.
Allan -
I have Adobe Acrobat installed as part of the CS6 suite.
It has stopped working (yet again -- it has done that three of four times over the last year).
I have spent days trying to repair it; etc. without any success.
The last time this happened, it was necessary for someone from Adobe to reinstall it entirely, if I remember correctly.
I give up. Can anyone tell me what I must do get the program to actually work?
I spend more time trying to get Adobe Acrobat to work, than I do actually doing my work.
My OS is Windows 8.1. My system has 16 MB of RAM, and hard disks are not overfilled.
I run update virus checker (Kaspersky) daily.
Cheers,
HughHi Hugh ,
Could you please tell what are the challenges you are facing while trying to access Acrobat ?
Do you get any error message ?If yes ,please share the screen shot of the same.
Please try the solution outlined here: http://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html
OR
Try repairing it from Control panel, or try launching it with a different user account and check if it works or not.
Install the latest updates for Acrobat X from the link : http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
and check.
Let us know how it goes,
Regards
Sukrit Dhingra -
How to save changed data from a input field to the source structure
Hi,
I have a small problem with the onChange event with HTML input fields.
When changing a value of a input field or by creating a new value for a field the OnChange event is called by moving away the mouse pointer....
get_form_field( 'field_name' ).
But is it possible to write back the new value in the source field ls_screenstructure_field1 without using the OnInputProcessing?
I ask because my application´s structures have a lot of fields that should be filled and changed by input fields.
It´s not comfortable to request every new value with .. = request->get_form_field(... .
Thanks for helping.
Cheers,
Andréyou wanted a onchange for a htmlb:inputfield which would also trigger server event. try the following code.
<htmlb:inputField id = "test"
alignment = "LEFT"
size = "6"
required = "TRUE"
doValidate = "TRUE"
type = "INTEGER"
/>
<bsp:htmlbEvent id="myid" onClick="myonclick" name="ValueChanged" />
<script for="test" event=onchange type="text/javascript">
alert(this.value);
ValueChanged();
</SCRIPT>
if the value in the inputfield is changed it would trigger a alert at the client side and also trigger a server event. now you can caputre the value in oninputprocessing.
Hope this helps.
do let us know if you need help in how to capture this value in oninputprocessing.
Regards
Raja -
I have copied my iTunes library onto a new computer, but when I play back the songs using the new computer, there seems to be random "miss" or "drop out" during play back, similar to a small scratch on a vinyl record. Although when I play the same song over again, the "miss" occurs in a different location during the song. No probs with old computer, just the new one. I'm onto my third new computer - same problem. Any suggestions please?
You don't say which version of iTunes you are using, but the symptoms you describe have been encountered by some users with the 64-bit version of iTunes 12.1.
There is an alternative version for 64-bit editions of Windows here:
iTunes 12.1 for Windows (64-bit — for older video cards)
that seems to address the most of the playback issues that some users have been reporting with the full 64-bit version of 12.1.0.77 - including problems with Bluetooth speakers where either sound is degraded or completely absent. The alternative installer here is the same architecture as most previous "64-bit" versions of iTunes, i.e., a 32-bit application with a 64-bit installer. The "for older video cards" label appears to be something of a misnomer as some people have reported that this corrects problems found on current / high-spec systems.
Some users have reported that after installing this alternative version it is necessary to adjust the "Play audio using" selection (normally to "Direct Sound" rather than "Windows Audio Session", though this may vary based on your audio hardware/drivers) in Edit > Preferences > Playback to restore glitch-free audio (one part of the reported symptoms is that the "Direct Sound" choice isn't available, usually in Windows 8). It may also be necessary to ensure that your Bluetooth speakers are active and selected as the default audio device before you run iTunes.
If this doesn't address the issue, you may want to think about reverting to iTunes 12.0 - see Turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for steps needed to completely remove all installed iTunes components, and for links to the 12.0 installers.
Maybe you are looking for
-
Help needed for enhancement in Purchase requisition
Hi all, Our client uses me59n to generate PO's automatically using purchase requisitions. Now, the requirement is ... If net Purchase value is 0 in purchase requisition, then Free(UMSON) field in Purchase order shoud be "checked". lemme explain the
-
Iphoto'09 won't import any photos
whenever I try to import photos it says "the following file could not be imported (the file is in an unrecognized format)" most of the pictures i tried to import were in jpg. format which shouldn't be the problem. please help!
-
Use a combobox to list records in an access database
Hi, I am trying to create a Word document that contains fields to display data from an Access table. I used the mail merge function. I want to add a combo box in the Word document that will hold the Invoice numbers generated in the Access database. T
-
I'm having a problem in sw update in my nokia C7-0...
Hello everybody .. The problem is when I try to install updates for my nokia c7 through sw update I got always a messaged saying the the update failed I tried the soft reset thing but still the same problem is present I also used OVI Suite in my pc .
-
SB600 RAID 0 on SATA 1 & 2 with a DVD SATA on SATA 4?
Can I have my 2 HD's connected to SATA 1 & 2 (SB600) in a RAID 0 config and also have my DVD on the SB600 (say on SATA 4)? When I try, I no longer see the DVD reported and can't make it a boot device (which I need). Based on some reviews, it looked