Unable to create sub site after setting up site subscription in Sharepoint Foundation 2013

Hi, All,
I have set up sit subscription in to the sharepoint. I have a Site collection which is assign to specific tenant group. I have assign sevral custom features to the tenant group. What happening now is, when I am creating a sub site, it throws an error that
specific feature(e.g CustomList feature) is not available. So I added that feature definition to tenant group. Again I tried to create sub site. Now it shows error that specific feature(this time it shows AnnouncementList feature) is not available. So I added
that feature too. Now its showing me these kinds of error continuously.
So what required is I need to add all the default features to my tenant group. Do you have idea how can I add those feature by single command instead of I add it to the tenant group one by one ?
Thanks.
Your help is appreciated.

You can use Powershell to create a Feature Pack that will add multiple features to a tenant group. Here's one for the default Foundation Features.
http://gallery.technet.microsoft.com/office/SharePoint-2013-Foundation-d3d1637f
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Similar Messages

How do I create a project site after I publish a project in Project Server 2013?

How do I create a project site after I publish a project from project pro 2013 in Project Server 2013? I'm trying to look for an option in the ribbon but haven't found any.
Thanks
James T.F

Hi James,
See in the article the procedure for site provisionning settings.
Note that the project site is created based on the template associated to the chosen project type (EPT) when the user first publishes his project. Be aware that if you allow the user to choose weither or not he'll create a sharepoint site when publishing
his project, he will be prompted in Project Pro with a dialog box giving the choice to create or not the site.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Sharepoint foundation 2013 : After doing backup cannot access the site "Sorry, this site hasn't been shared with you"

I am using SharePoint Foundation 2013 , i have backed up the site using powershell with the following command:
-backup-spsite -identity http://dmsserver/sites/demo/ -path C:\SPSiteBackup.bak
After backup finished, i can't access the site, the message "Sorry, this site hasn't been shared with you" appears, even the site administrator collection is configured coorectly, with the Administrator account.
Whats the problem?
Please Advice.

Hi husseinsa,
According to your description, my understanding is that you could not access the site after backing up the site collection in SharePoint 2013 Foundation.
Could you access other sites at the same site collection?
Let’s do a troubleshooting for this issue:
Please delete the IE cache: IE options->General->Delete, select all checkboxes, and click Delete.
Go to CA->Application Management->Manage web applications, select the web application which hosts the problematic site .
Click Permisson Policy, make sure there are not any deny policies for site collection administrator and site collection auditor.
Back to the web application list page, click User Policy, check whether there are any user policies for denying permissions.
Change the site collection administrator or add a secondary site collection administrator in CA, then use the new site collection administrator to log in the site, compare the result.
Open IIS, expand the server, and click application pools.
Find the problematic web application pool, make the identity of the pool is correct, then do an IISRESET, compare the result.
If this issue still exists, please check the log file to find more information about this issue. The path of the log file is
: C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Or you can use Event Viewer(Start->Run->event viewer) to find the log.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Site Login Behavior For SharePoint Foundation 2013 Users With Expired Passwords?

What are the most user-friendly ways of getting external users with expired AD passwords back into the SharePoint site with a new working password?
We already send automated email notifications to users reminding them to change their soon-to-expire passwords. However, sometimes they miss seeing the email notifications before the password expires (such as after returning from vacation or just carelessness
and lack of attention to email messages) or they see the warning messages and forget to act on it.
When this happens and they try to log into the SharePoint site from the Internet, their login fails without telling the user the reason they can't log in is because their password expired. So, they end up confused and call the help desk to get their
password reset.
Is there a way to set up SharePoint Foundation 2013 login in a similar way to the OWA login so that, when a user with a correct but expired password tries to log in, it gives them a prompt to set a new password right there rather than just an error indicating
their login failed for unknown reasons or password is "incorrect?"

It could be done. You get a different event log entry for an expired login attempt than for a wrong password, 4625 events denote a login failure and an error ID of 23 denotes a logon failure.
A naff, but simple, approach would be to create a tool that checks your server logon event log for 4625 entries and then emails that user, or the help desk, or security, that they're trying to get onto your system with expired credentials.
For a more polished experience you've got a lot more work and bluntly it's going to be impractical for you. You'd have to re-write sections of the SharePoint authentication process or intercept the process, both are risky and not a good idea to try.
There's a really interesting paper here that might be of interest, it won't help you in your current situation but it might shed more light on the overall authentication/authorisation process.
http://www.sans.org/reading-room/whitepapers/forensics/windows-logon-forensics-34132

SharePoint Foundation 2013 Feature Pack and Site Templates

I have created a site using a site subscription and a SharePoint Foundation 2013 Feature Pack ( used the SP Foundation Feature Pack Script here http://gallery.technet.microsoft.com/office/SharePoint-2013-Foundation-d3d1637f that
was created by Spencer Harbar)
When I go to create a sub-site, there are 3 site templates that are available that strictly speaking should not be for Foundation edition. When I try and create sites using those I get errors because the features needed from them are not part of the subscription.
The site templates available are:
Collaboration > Project Site
Enterprise > Document Center
Enterprise > Records Center
Does any one know why these would be displaying?

Hello, if I remember correctly the issue was that I created the form with InfoPath 2013 and was trying to test using InfoPath 2010. This does not work.
Did you create the form using InfoPath 2013?

Error 503 after renaming SharePoint Foundation 2013 Server

We renamed a SharePoint Foundation 2013 server using the procedure outlined here:
http://www.bluesphereinc.com/blog/renaming-a-sharepoint-20102013-server/
Everything seemed to work fine until we tried to access the site afterwards. Now all we get when trying to access the site is the Error 503: Service is unavailable message. We can get into central administration without any problems.

Hi ,
According to your description, my understanding is that you encountered 503 error after renaming SharePoint Foundation 2013 Server.
For your issue, please refer to the actions as follow:
1.Check the web site properties in IIS. Under home directory tab, check the application pool value and then open that application pool from the application pools (separate node in the IIS tree). Click the
identity tab and see who is the pool assigned to. For the sake of testing, you can select "Predefined" and select local service from the drop down. Restart IIS and see if things work out for you. Http 503 error is generated by the IIS and it happens
when web server sends data stream back to the web site.
2.Verify that all SharePoint services are started, this error might occur because of changing the service account password. You may need to change the new password to application pool or SharePoint timer
service. Click the stopped application pool -> click advanced settings ->Identity ->click the user to retype the user ->Application Pool Identity dialog ->click set -> manually type the user name and password. Then restart the server.
If your issue persists, please provide detail error message of ULS log
to determine the exact cause of the error?
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
Best Regards,
Eric
Eric Tao
TechNet Community Support

Windows Security Prompt in Internet Explorer 10 on Sharepoint Foundation 2013 site

Hi,
I have Sharepoint Foundation 2013 and when I access the site from Internet Explorer 10 I get prompted for windows security, after enter my domain credential I am able to log into the site. When I access the site from Internet Explorer 9 I don't
receive the windows security prompt. Below you will find screenshot. How can I prevent Internet Explorer 10 and later to not prompt for domain credential?
Thanks

Add *.domain.com to the Intranet Zone in IE.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Search not working in site collections migrated from MOSS 2007 to SharePoint Server 2013

I have few site collections migrated from MOSS 2007 to SharePoint Server 2013 using database attach (first to 2010 and then to 2013).
When I search for anything in these migrated sites, I get "Nothing here matches your search".
Checked the crawl log for these sites and see this error for all items.
The content processing component failed to process the security descriptor of the item. ( The input ACL is invalid (1210 / 2072).; ; SearchID =
Some-Random-GUID )
Search works fine in newly created sites in 2013 environment.
Please help.

Hello
Did you migrate your users to claims when you migrated the databases?
$wa = Get-SPWebApplication http://yourdom.com
$wa.MigrateUsers($true)
$wa.ProvisionGlobally()
I assume the sites that work and the migrated content are in the same database?
MCITP-EA | "Never test how deep the water is with both feet"

SharePoint Foundation 2013 error after March 2013 PU

Hi all!
i have SharePoint Foundation 2013, install March 2013 PU but now i can't edit webpart pages that have a search webpart. Then i install the SP1 too, but the issue continue. Any idea?
I read about the SP1 problem, but i installed the lasted update.
the errror on the IE developer tool says that SCRIPT5009: 'WebForm_OnSubmit' is undefined
Its only when i put a search webpart on page.
thanks

Hi all,
I had to open a MS case to resolve this issue.
I going to explain the problem and the resolution for you.
Our SharePoint time zone is Caracas (-4:30)
Our SharePoint language was Spanish (Venezuela)
This was part of the page code before install the upgrade:
var _spRegionalSettings={adjustHijriDays:0,calendarType:1,firstDayOfWeek:0,firstWeekOfYear:0,localeId:2058,currentDateInLocalCalendar: new Date(2014, 5, 27),showWeeks:0,timeZone:'-04:30:00.0001171',timeZoneInHours:-4.5,workDayEnd:1020,workDayStart:480,workDays:'0111110',time24:0};…
And after the upgrade:
var _spRegionalSettings={adjustHijriDays:0,calendarType:1,firstDayOfWeek:1,firstWeekOfYear:2,localeId:3082,currentDateInLocalCalendar: new Date(2014, 5, 27),showWeeks:0,timeZone:'-04:30:00.0005463',timeZoneInHours:-4,5,workDayEnd:1020,workDayStart:480,workDays:'0111110',time24:1};…
So for this thing all script failed.
In our case I noticed when added any search webpart.
So the resolution:
Change the language to Spanish (Mexico) or some language where the decimal separator wasn’t a coma “,”
I hope this help.
Thank you Victoria.
Alexandra
Alexandra

Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2

HI,
I am Unable to install Sharepoint Foundation 2013 in Windows Server 2012 for FIM 2010 R2,
Before SharePoint Foundation 2013 installation I installed all prerequisite software that is required for SharePoint Foundation 2013 but when we run SharePoint Foundation 2013 setup that gives below error so I am requesting you please help on this.
Setup is unable to proceed due to the following error(s):
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Regards
Anil Kumar

You really need to do what error is suggesting.
Windows Server Appfabric is not correctly configured.You should unistall Windows Server Appfabric and reinstall it using the SharePoint Products Preparation Tool.
Nosh Mernacaj, Identity Management Specialist

Error Accessing Host Named Site Collections In SharePoint Foundation 2013

We have a new SharePoint Foundation 2013 server that has one web application two host named site collections. We get the "This page can't be displayed" message when we try to navigate to either of the site collections. Adding the server's IP to
the host file on the machine we are testing from doesn't help. We can ping the new sites from that machine. The web application does not have a host header.
Web application URL = http://servername
Site collection #1 URL = http://customer.company.com
Site collection #2 URL = http://vendor.company.com

Hi,
I recommend to verify the things below:
Check if site can be accessed with site collection administrator.
Add the SharePoint sites to a trusted zone to see if the issue still occurs.
As this issue can be caused by many reasons, you may check the ULS log for more detailed errors.
For SharePoint 2013, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

No Page title after migration from WSS 3.0 to SharePoint Foundation 2013

Dear community,
I have migrated serval sitecollections from WSS 3.0 (SharePoint 2007) to SharePoint 2010 Foundation and then to SharePoint Foundation 2013.
Now in SharePoint 2013 no page titles appears, but under the title "Homepage" appears. I'dont know where "Homepage" is come from. The title of the page is "Test". Changing the title has no effect. In SharePoint 2010 Foundation
the page titles appears correctly.
Does anyone have a solution for this problem?
Thank you very much and best regards,
Lucian

I compared the html code of the two sites.
Migrated site:
<h1 id="pageTitle" class="ms-core-pageTitle">
<span id="DeltaPlaceHolderPageTitleInTitleArea">
<label class="ms-hidden">Test Title</label>
</span>
<div id="DeltaPlaceHolderPageDescription" class="ms-displayInlineBlock ms-normalWrap">
<a href="javascript:;" id="ms-pageDescriptionDiv" style="display:none;">
<span id="ms-pageDescriptionImage"> </span>
</a>
<span class="ms-accessible" id="ms-pageDescription">
</span>
<script type="text/javascript">// <![CDATA[
_spBodyOnLoadFunctionNames.push("setupPageDescriptionCallout");
// ]]>
</script>
</div>
</h1>
Standard site:
<h1 id="pageTitle" class="ms-core-pageTitle">
<span id="DeltaPlaceHolderPageTitleInTitleArea">
Test Title
</span>
<div id="DeltaPlaceHolderPageDescription" class="ms-displayInlineBlock ms-normalWrap">
<a href="javascript:;" id="ms-pageDescriptionDiv" style="display:none;">
<span id="ms-pageDescriptionImage"> </span>
</a>
<span class="ms-accessible" id="ms-pageDescription">
</span>
<script type="text/javascript">// <![CDATA[
_spBodyOnLoadFunctionNames.push("setupPageDescriptionCallout");
// ]]>
</script>
</div>
</h1>
There is a .NET Code in the HTML Code of the migrated site:
<label class="ms-hidden">Test Title</label>

When connecting to a server farm in sharepoint foundation 2013 cannot create new farm error: One or more types failed to load

When trying to create a new server farm in the sharepoint foundation 2013 we get a following error :
The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered.
PS C:\Users\Administrator> New-SPConfigurationDatabase
cmdlet New-SPConfigurationDatabase at command pipeline position 1
Supply values for the following parameters:
DatabaseName: SharePoint_Config
DatabaseServer: PC78\SQLEXPRESS,25111
FarmCredentials
Passphrase: *********
New-SPConfigurationDatabase : One or more types failed to load. Please refer
to the upgrade log for more details.
At line:1 char:1
+ New-SPConfigurationDatabase
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase:
SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPUpgra
deException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon
figurationDatabase
And the error log is shown below :
Microsoft.SharePoint.Upgrade.SPUpgradeException: One or more types failed to load.
Please refer to the upgrade log for more details.
at Microsoft.SharePoint.Upgrade.SPActionSequence.LoadUpgradeActions()
at Microsoft.SharePoint.Upgrade.SPActionSequence.get_ActionsInternal()
at Microsoft.SharePoint.Upgrade.SPUtility.GetLatestTargetSchemaVersionByMajorVersion(Type typeActionSequence, Int32 majorVer)
at Microsoft.SharePoint.Upgrade.SPUtility.get_CurrentSPSiteWssTargetSchemaVersion()
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, Strin... b712a522-fa85-49eb-b59c-dedf55295504
...g secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName, Boolean overrideCompatibilityRestriction)
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, Boolean useHostHeaderAsSiteName)
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, ... b712a522-fa85-49eb-b59c-dedf55295504
...String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuil... b712a522-fa85-49eb-b59c-dedf55295504
...der configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase.InternalProcessRecord()
at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord() b712a522-fa85-49eb-b59c-dedf55295504
Error Category: InvalidData Target Object Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase Details NULL RecommendedAction NULL b712a522-fa85-49eb-b59c-dedf55295504
Leaving ProcessRecord Method of New-SPConfigurationDatabase. e9ae5ba6-c499-0000-d35c-aee999c4cf01
we are using server 2012 R2 and we don't have office 2010 installed

Yes,SQL server is on the same server as SharePoint
SQL has both the permissions Securityadmin
and DBcreator roles on SQL Server.
When we run those sharepoint management shell commands the database will be created with the error
msg (shown in attachment)

Unable to create webOS account to set up HP Touchpad

Alright, so I got my Touchpad Saturday, and tried to set it up the day after. So in order to actually use it, you have to create a webOS account, but every time I try, I get the error "We are unable to create an account for you. Please try again in a few minutes or contact HP for help resolving this problem. Visit palm.com/support for more information." I tried countless times, still getting the same error, even after starting the setup process over, restarting the touchpad and my router, trying different wireless connections, trying it at different times during the day, as well as changing the security question, password and email to see if that had an effect. I have tried going to the site suggested and trying to chat online with them, as well as calling them, but they were busy, so I was hoping I could find an answer here.
Post relates to: HP TouchPad (WiFi)
This question was solved.
View Solution.

I too am having the same problems and can't get the WebOS Doctor because I don't have the palm account. There has to be a way to download the doc without an account.

Unable to create image buffer after RAM preview

Running into an odd and frustrating error. Built a comp using the new Ray-traced 3D renderer and now I'm regretting being an early adopter big time with all the problems I've been encountering with it. The latest comes whenever I do a longer RAM preview in an attempt to watch the whole duration of my comp. It will get to about 170 frames or so, at which point I've interrupted by pressing spacebar because I don't need to see all the way to the end of my work area (around 220 frames). It'll play the RAM preview back fine, and even loop it, but as soon as I stop playback, I get this error message: "After Effects warning: Unable to create image buffer." There's only one button: "okay" and as soon as I click it the same error pops up again and it will never go away, forcing me to close AE from the task manager. I've taken to saving before every RAM preview like I used to do with Flash before previewing my buggy swfs for fear I'll lose all my work after previewing. Any ideas about what might be causing this?
Some more details about my comp:
1920x1080 @ 29.97
Ray-traced 3D
About 70 3D layers (I'm guessing this is my downfall - new renderer not designed for this many layers?)
Running Windows 7 Professional
i7 2600K
32GB RAM
2x GTX 570 video cards running latest driver (301.42, CUDA 4.2.1)
508GB free on my 2TB internal drive where the project and cache lives
From my GPU info window in case it's useful:
Fast Draft:
Available
Texture Memory:
600.00 MB
Ray-tracing:
GPU
OpenGL
Vendor:
NVIDIA Corporation
Device:
GeForce GTX 570/PCIe/SSE2
Version:
3.0.0
Total Memory:
1.20 GB
Shader Model:
4.0 or later
CUDA
Driver Version:
4.2
Devices:
2 (GeForce GTX 570, GeForce GTX 570)
Current Usable Memory:
1.04 GB (at application launch)
Maximum Usable Memory:
1.25 GB

Yeah, some buffer is very likely not flushing when you interrupt the preview and then there is no more memory on the graphics hardware. Consider setting the work area and your preview options to use only the work area. if it finishes the preview "correctly", it may not suffer the issue. Beyond that - raytracing doesn't/ shouldn't care about the number of items. The math is such, that it makes no difference whether you render a million polygons or just one. Of course there are still limitations due to the GPU dependency, but I doubt you ever truly exhaust the cards' geometry buffers. Compared to pixel data that is a small amount...
Mylenium

Unable to create sub site after setting up site subscription in Sharepoint Foundation 2013

Similar Messages

Maybe you are looking for