Unable to open project file - from one 6.0.2 to another 6.0.3.

Hi
We're at a time-critical stage of finishing our movie, and we need to get the color-corrected sequence from the post-house to our studio so we can make some picture changes and get it back to them. They can open the project file just fine (it was created in 6.0.2, but they since updated their system to 6.0.3), and we have just updated to 6.0.3 also. Quicktime is 7.4.5 (which matches their version). However, they've FTP'd it to us, and we cannot open it here. FCP gives the error "Unable to open project file". It's not the "older version" message which I've seen before, it just ... fails to open it. Almost as if the file were corrupt. However, the post house can re-download the file from FTP and open it there, so this confuses me. I've also tried the file on a FCP 6.0 system (which I can't update because it's an Avid system locked to a certain version of Quicktime) and the same error message.
Would anyone be willing to test the file and see if they can, at least, open it?
Many thanks.
Matt

Have them zip the file... Project files via email often don't open if they aren't zipped..
Jerry

Similar Messages

  • Unable to open project files from 2001

    I have a .fcp file and a .fcm file from 2001 that I am unable to get FCP 5 to recognize. For the .fcp it gives the error "Unable to open project file." For the .fcm it says "File error: Wrong type." I don't remember which version of FCP they were made on (perhaps even FCP 1?) but I'm really worried about not being able to open them anymore. Any suggestions, please?

    Oh no! I am really in trouble, because this is a very complex project with about a million cuts. What you're basically saying is I should just start over? What other options to I have? There must be some way to convert an old FCP file, no?

  • Unable to open project files can filters effect this ?

    Hi Guys ! I have been a long time reader of the forums and from just observing have always learned a great deal from the discussions. Up until now I have been able to read through post and always find an answer from some of the great advice. As a relatively new Final Cut Editor I have limited knowledge but can edit and have learned enough to structure my work flow and put a project together how I would like it and complete with good results.
    I have read a few post on this subject “Unable to open project file” but haven’t seen any with the specifics as my own.
    Up until yesterday my files were opening all fine and working perfectly until this last night I had saved and shut down my Mac in the normal fashion. When I tried to open two specific files I was greeted with the infamous “Unable to open Project Files”. These as I can gather are the only two files that will not open and both files have used the RIVER ROCK– Chromatic Glow, or Day for Night Free downloadable Filters in the last 2 weeks could this be the reason ?
    I have all the recent updates and have tried going into the Auto Vault and Render files to access the last available versions of these project files. I am able to access those but am only left with a much earlier version of the same project like a version a week earlier without vital changes.
    So I would pretty much have to start again.
    Any Help would be greatly appreciated
    Regards
    FC

    Hi Tom thanks very much for your reply! , I un mounted the external drive , and reset and created a temporary scratch disk on My Hardrive to get Fce to start.
    The 3 projects I have been working on which all were rendered on the 2nd of April around 3 in the afternoon. Two of the Files using the River rock filters are Not accessible from the most recent and up to date versions. The one remaining Project is able to be opened and is the only one not using the filters.
    The two files accessed from the auto save vaults before April 1st up to 3pm April 2nd are working and are able to be opened with no problem. Everything after that is not opening which is a real downer as its where the project became near completion but at least I have a time frame of when things started to go wrong.
    What would you suggest?

  • Unable to open project file. even though I just saved it.

    Hi,
    I just started back to work on a little FCE 2 video project after a couple of months. When I went to load the file, it said "Unable to open project file". I thought, "hmmm, I'm a beginner, maybe I'm not opening the right file." So, I made a new project with a clip and save it. Then I tried to reopen it. No go. Same message.
    So, something is wrong but I can't figure it out.
    My preferences are set to save the file on an external hd. The file icon shows up but says that the FCE project file has 0KB. How can that be?
    I look using spotlight for the file, thinking maybe the file was saved elsewhere. It doesn't show up.
    Sorry if this subject has been treated before. I searched the forum and didn't find a problem that matched my circumstances. One that was close.
    Thanks for any help you can give.
    Doug

    Thanks for your reply Kyriakos.
    Yep, I've tried the files in the AutoSave Vault and still Unable to Open Project File.
    Also tried deleting the FCE preference and cache file, fixing permissions and doing a save as instead of a straight save, as outlined in the article below:
    http://www.kenstone.net/fcphomepage/good_apps_gonebad.html
    It only has worked on one project which is the only file that opens now.
    It's driving me nuts! I'm going to start doing some major jobs soon and can't have this happen. Maybe I'll try to reinstall FCE then if no luck it's time for a refund.
    Would upgrading from FCE 1 to HD have anything to do with it?
    Have you had any luck, Doug?
    Pat

  • "unable to open project file" (fce icon has transparent sheet behind it??)

    My most recent save of a project keeps coming up as "unable to open project file". I looked in the autosave and its not there either. The icon for this project has what looks to be a transparent sheet over it or behind it. There are stills in the project, not sure if that has anything to do with it. If anyone knows whats going on I would great greatly appreciate the help.
    Thanks,
    C

    Thanks for your reply Kyriakos.
    Yep, I've tried the files in the AutoSave Vault and still Unable to Open Project File.
    Also tried deleting the FCE preference and cache file, fixing permissions and doing a save as instead of a straight save, as outlined in the article below:
    http://www.kenstone.net/fcphomepage/good_apps_gonebad.html
    It only has worked on one project which is the only file that opens now.
    It's driving me nuts! I'm going to start doing some major jobs soon and can't have this happen. Maybe I'll try to reinstall FCE then if no luck it's time for a refund.
    Would upgrading from FCE 1 to HD have anything to do with it?
    Have you had any luck, Doug?
    Pat

  • 'Unable to open project File' Please help....

    Help. Since yesterday, Final Cut Pro has been crashing every time I have tried to render something. I have used the FSC Maintenance Pack that has been recommended and ran Crash Analyser and Corrupt Clip Finder. No corrupt clips were found and the Crash Analyser fixed the problem for a while and I was able to work for a couple of hours. (prior to this I also removed some Motion files and that also temporarily stopped the crashing). I began working on my project again today, and the same thing started to happen. I kept having to turn everything off at the source until finally I gave up! Just before I turned it off I started running Autosave Cleaner but it seemed to freeze too so I Force Quit it. I have just turned it all back on again and to my horror, my project is not even opening. My other FCP projects are opening but not the one I am working on. I have no idea what to do. Final Cut opens and the message is 'Unable to open Project File'. I am so upset and really hope that someone out there can help.
    I run 10.5.8, I have 10 GB memory. All my clips are imported as XDCAM EX 720p25 (original format MPEG HD) but I have been working in this project for weeks without a problem.
    Thanks in advance
    Gill

    I don't know why it is set to the internal disk, but that is the default. That is not project related. It is system related (hence System Settings). So probably you started fcp one without the external disk attached. FCP forces you then to choose another scratch-, waveform-, thumbnail-, autosave location.
    Probably you've set it all to the internal disk then.
    Next time when the external disk was there again you might have only reset the scratch disk, but not your Autosave location... Just a thought.
    That is, IMHO, the disadvantage of system orientated scratch disk settings...
    Rienk

  • "unable to open project file" after importing layered Photoshop file

    After spending a day of work, I saved and closed my 720p project. Today, I can't open it. I get a message saying: "Unable to open project file." Same thing happens with the auto-saved copy.
    I have narrowed down the problem to this: I made a new 720p project file. Without doing any work, I import a single layered Photoshop file (.psd), then save and close the project. When I try to open it, I get the message again: "Unable to open project file."
    Works fine at home. What am I doing wrong?
    Thanks,
    PPJ

    I'm just now having the same problem, though I'm using FCE 3 . I can open older (NTSC) files. Just not new HD files that I have also blindly used alpha+Photoshop layers in. When I create a new HD file with a few HD clips in it and even use an audio track from the project I'm wanting to make, and use TIFF versions of the graphics and save it, it will open right up -- but something about these PS files.

  • Since last update, unable to open PDF files from either banking site. The other (IE) works fine but I hate IE. I deleted newer versions and went back to older releases. No help, same thing. Checked settings in options. That is ok. What's up?

    Unable to open PDF files from my banking statements.

    I think almost every dev is on arch-general, so that is the place to contact the group in general.  Specific points can probably be emailed to the dev involved, if one is identifiable and if the bug tracker is not a better place (bug reports to my email get ignored).
    I think the whole problem here is that there is really no dev in charge of that package.  So your emails were probably seen then skipped over by all devs thinking not my problem...  (I know that is true for me).   Then Andrea noticed an "orphan" package that needed updated and went ahead with it without connecting it to your previous emails, which is unfortunate.
    Now our maintainer backend is fixed, hopefully we can get all the orphan packages adopted out, or at least know if we need to bring on new people to maintain them.  That way, there should always be someone who information about specific packages should be sent to.

  • "Unable to open project file" Error Message

    I pulled an all-nighter (13 hours of editing) last night to create a critical project in FCE 3.5.1 on my Intel iMac running 10.4.11 then left this afternoon for a few hours and shut down my machine. Came back tonight and tried to open the project (which I saved on my Maxtor 1 TB external drive along with all of the scratch disk files). To my absolute panic, it won't open the file now with an error message that simply says, "Unable to open project file". HELP!!!! Anyone have any suggestions?!?!

    In the past I found (and reported to Apple Feedback) the same bug Steve reports here, but I should recall that the problem:
    - only appeared in PAL projects (probably not the case for kscritch) - never heard of it in NTSC
    - was consistent in FCE 3.x, not so in FCE 4
    I made tests importing .psd images with transparency into PAL projects using FCE 4, and I had various behaviours: sometimes the project worked, sometimes I couldn't open the project again (as in FCE 3), sometimes I had error messages with inconsistent behaviour (msg like "file error", but the project opened and file was there...), etc. so I decided to do without.
    Now I only import .tif or .png images when I need transparency
    Piero

  • "Unable to Open Project File" - error

    Does anyone know how to resolve an "Unable to Open Project File" - error. I accidentally shut down my computer wrong, although Final Cut wasn't open.

    Welcome to the forums.
    The project file might have gotten corrupted. Look for the AUTOSAVE VAULT (typically in the DOCUMENTS>FINAL CUT PRO DOCUMENTS folder) and open the most recent version. Copy it to your main project folder if it works.
    If not, then try trashing your prefs with FCP Rescue.
    Shane

  • Unable to open .chm file from a link in Weblogic 7.0

    Unable to open .chm file from a link in weblogic server. But the same
    jsp code works in Websphere
    Sample Code :
    <!-- < a href="JavaScript:window.navigate('help/manual.CHM')">
    Linked Text</a> -->
    The above link, works well in websphere. help is a folder that
    resides in the server. But when i tried to execute the same in
    Weblogic, some junk characters appeared . so i tried to direct the
    link to Display.jsp and passed the path of the chm file as the
    parameter. I cleared teh out buffer using out.clearBuffer() . i set
    the content type to application/x-msdownload and also set the header
    to content disposition.
    Nothing worked .
    I also tried another way.. That is the following
    I even tried including the mime type
    <mime-mapping>
    <extension>chm</extension>
    <mime-type>application/x-msdownload</mime-type>
    </mime-mapping>
    in the web.xml file. and still it doesnt work
    Nothing Worked . What should i do ? I need immediate help to sort out
    this issue. Can anybody help me
    - Angel

    This could be a Launch Services issue. The following article describes how to manually reset Launch Services — the notes at the bottom of the article also provide information about the side effects of deleting each of the files involved:
    Resetting Launch Services
    If you prefer using a cache cleaning utility instead of following the manual procedure described in the previous article, take a look at this other article for general troubleshooting and cache-cleaning procedures. Actually, you should also verify/repair the startup disk (not just permissions), as described there:
    Resolving Disk, Permission, and Cache Corruption
    The most appropriate utility for this particular problem probably is Tiger Cache Cleaner, but you may also want to consider other utilities, such as OnyX, or Cache Out X, which are free. Whatever utility you choose, be sure to read this first:
    Side effects of System cache cleaning
    As an example, this is how you should proceed with OnyX:
    1. Quit all applications.
    2. Launch OnyX and enter your administrator password.
    3. Go to Maintenance > Reset and check LaunchServices database.
    4. Un-check any other pre-checked options.
    5. Click the Execute button.
    6. Restart the computer.
    BTW, if you’re running Mac OS X 10.4 (Tiger), as your profile indicates, it would have been more appropriate to discuss this in the Mail & Address Book - Tiger forum. If the discussion applies to both Mail 1.x and Mail 2.x, it doesn’t really matter, but it’s difficult to know that in advance.

  • I cannot open pdf files from one supplier when using Adobe Reader but I can using another Viewer

    I cannot open pdf files from one supplier when using Adobe Reader but I can open it if using Google PDF viewer or another viewer. The Adobe reader gives the error "There was an error opening this document. The file is damaged and could not be repaired" when I try to open the file. The version of Adobe Reader is 10.1.7, however I have tried other versions and they all fail the same way.  I have tested on a number of different PC's in different networks and all fail using Adobe Reader but work using alternate viewer. Also the PC's will open a PDF from any other source.

    Newer Reader versions are more strict than older versions (and other PDF viewers).  If certain minimum requirements are not met, Reader will tell you that the PDF is damaged.  This can happen when a document was created with software that does not adhere to PDF standards, or when the file was damaged during a download or email transmission.
    You should contact the creator of these PDFs.

  • Unable to open project file

    Hello!
    I'm in desperate need of a miracle here. I've already read over other solutions to this problem, but perhaps someone can come up with something I haven't. I'm using Final Cut Pro 7.0.3, and I finished a project last month that took a lot of editing work. After the project finished, I cleaned up my folders as usual, copying over all the media and the FCP project file over to my network external hard drive. I then made the horrific mistake of deleting my autosave files. Little did I know I'd want to access the project later, and instead of opening and having to reconnect my media, it just comes up with the error of "unable to open project file".
    I've tried copying the project file I saved in November back to my local computer and opening it. I tried dismounting the network external hard drive and opening my local project file. I tried adding a .fcp to the end of the file's name. And I downloaded Pro Maintenance Tools in a hope that it could fix the corrupted file, it said it was fixed, but I still can't seem to open it. All my other FCP files are opening just fine.
    I'm also interested if anyone knows whether my deleting everything FCP created except for the project file might be why it crashed?
    Thank you in advance to anyone who even reads this hoping they can help.

    Sorry, I'm out of ideas. Perhaps someone else with greater tech skills will chime in on this and be able to suggest a solution. Deleting or changing the location of the files you mentioned earlier in the thread can certainly complicate and add time to  a new  edit but should not have caused the problem you've encountered in getting the project file to open.
    Good luck.
    Russ

  • "Unable to open project file" message in final cut express 3.5.1

    I have (well had now) a project with 3 video clips and multiple .psd files as stills. When the project contains just the 3 video clips and a couple of transitions I can save the project and quit Final Cut Express and relaunch FCE and when I try to re-open the same project, it opens just fine, without any problems and just the way I expected it to be. After editing the same project for a couple of hours and saving along the way (this has happened twice now and I don't think the length of time of editing matters) and adding multiple still images to the 3 video clips (this part is new in my working with FCE); I save and quit. When I return to open the same project I get the message "Unable to open project file" and click the OK button, which is my only option and I am given a new blank project. So where did my work go???

    Thank you for the response, but it hasn't worked yet...
    I read the link. I am working off my internal drive.
    I re-named the Capture Scratch folder, and any Render folders and then launched FCE. I was presented with a window that reads "To preserve the integrity of the data used by Final Cut Express HD, it is necessary to ensure the existance of the following path(s)" The path in the box below is where my project file and support files are. My 3 options are Quit, Check again and Reset Scratch disk. I choose the Reset Scratch Disk button and it took me to the Scratch Disk window and I Set/Created a new folder and clicked Choose and then OK back at the Scratch Disk window and Continue at the initial window... the Reset Scratch disk button is now labeled Continue. I am given a new Untitled Project work space. I tried to open my project file and once again with the message "Unable to open project file".
    Where did I go wrong???

  • "Unable to open project file." i need help! URGENT

    before the problem...
    my film project and all its files were in a WD external drive. i had some problems with soundtrack pro being too slow because the files were on an external drive, so i bought 2 Internal Seagate drives. i moved all my files to the internal drives, and i changed my scratch disk to my new drive.
    i have done this procedure several times before, and i never faced this problem before!
    after...
    so i went on to launch my FCP project, and while loading i got this message "Unable to open project file."
    how can i fix it?

    nope!
    but here is what i did:
    i reformatted it, and moved the files again... and surprisingly, it worked!
    computers have a mind of their own sometimes!
    but now i have another problem... i opened soundtrack pro to work on the same project, but its very slow! it keeps freezing whenever i want to make any actions.
    whats the problem? and how can i fix it?

Maybe you are looking for