Unzipping Oracle8i Lite???
I downloaded the 5 files needed, and the batch file, ran the batch, it says o8ilite.zip was merged. But I can't find the file anywhere in order to unzip it, what am I doing wrong?
It sounds to me like you aren't familiar with
what zip files are. You need an "unzip" utility. The original is PKWares' zip utility. Currently, on a 32 bit winblows environment you will need pkzip25.exe to open the file.. (or a clone unzip utility). Check www.shareware.com to get this tool
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jefums:
I downloaded the 5 files needed, and the batch file, ran the batch, it says o8ilite.zip was merged. But I can't find the file anywhere in order to unzip it, what am I doing wrong?<HR></BLOCKQUOTE>
null
Similar Messages
-
Problem with Oracle8i Lite and Forms 6i
Problem:
I have installed first Oracle8i Lite Version 4.0.0.2.0 on my computer witch has no network card and it works wery well with The Open Client Adapter (OCA).
Then, I have installed Oracle Forms and Reports Release 6i, and from this moment, I get this message : "OCA-30002: ubofscr function not supported".
In the release notes, I can read :
"OCA Release 6.0.5.3.0 is installed for compatibility with Oracle Required Support Files version 8.0.5. If you install newer client tools which upgrade your Required Support Files to version 8.0.5.1, you may experience an error message, "OCA-30002: ubofscr function not supported". To upgrade OCA to correct this problem, copy the OCA605290.zip file from the \WIN32 folder of the Oracle8i Lite CD-ROM, unzip it and follow the instructions in the README.TXT file which it contains."
But on my Oracle8i Lite CD-ROM, there is no OCA605290.zip file from the \WIN32 folder.
What can I do ?
nullYou could try to "hide" the db-link by creating a local view above the dblink-table.
-
Error while creating a simple trigger in Oracle8i Lite
Hi,
I have Oracle8i Lite release 4.0.
I want to create a simple trigger on 8i Lite.
first I created .java file and got the .class file after successful compilation.
The .class file is sitting in my local C:\ drive.
I have a table having only two columns in 8i Lite and the structure is
TABLE : SP
ACC_NO NUMBER,
ACC_DESC VARCHAR2(20)
Then I issued the command :
SQL> ALTER TABLE SP ATTACH JAVA SOURCE "JournalInst" in '.';
After that getting the following error :
alter table sp attach java source "JournalInst" in '.'
ERROR at line 1:
OCA-30021: error preparing/executing SQL statement
[POL-8028] error in calling a java method
Following is the cause/action for the error code :
POL-8028 Error in calling a Java method
Cause: Most commonly refers to a problem when converting between Java and Oracle Lite datatypes.
Action: Check the calling parameters.
I can't understand where I am wrong ?
Could anybody help me out ?
Here is my source code of .java file
import java.lang.*;
import java.sql.*;
class JournalInst {
public void INSERT_JOURNAL(Connection conn, double AccNo, String AccDesc)
System.out.println("Record Inserted for :"+AccNo +" "+AccDesc);
Thanks in advance for solutions.
Sarada
nullI just started with 8i Lite, but as far as I know 8i Lite does not support PL/SQL code.
So you have to write your triggers and stored procedures in Java.
Ciao -
Error while creating a simple function, procedure or triger in Oracle8i Lite
Hi,
I have Oracle8i Lite release 4.0.
While creating a simple proceudre/function/trigger on the database, it's throwing the following error:
create or replace function test return number is
ERROR at line 1:
OCA-30021: error preparing/executing SQL statement
[POL-5228] syntax error
Here is my sample code.
create or replace function test return number is
begin
return 0;
end;
Tried to create the same function in the user SYSTEM too but got the same error message.
Thanks in advance for the soluton.
nullI just started with 8i Lite, but as far as I know 8i Lite does not support PL/SQL code.
So you have to write your triggers and stored procedures in Java.
Ciao -
Has Oracle8i Lite JAccelerator?
Hi,
I saw performance test received using JAccelerator running Oracle
8.1.5, but I can't find any information where to get it.
How about Orale 8i Lite? Has Oracle8i Lite JAccelerator?
Whithout it performance of Java stored procedures is very bad.
Regards,
Vladimir.
nullI have the Oracle8i Lite trial CD but it asks for authorization key which I could not find on the oracle web. Someone has the key?
How can I get the key? I have the same problem. Can anyone help out? I have also the same problem. Can anyone help out? Ce site d'oracle est de la merde. Ils disent les choses et ils ne tiennent pas leurs paroles. Tous ces liens ne marchent pas .... -
Need Help!!! Oracle8i Lite
Hi there,
I defined a connection against an oracle8i lite (4.0.1.x). This connection works fine - I can see the tables within the table-browser.
Try to create a new bc4j-package against this oracle8i lite with just 1 very small entity (table test with the column test_id). The business components package wizard "hangs" up when trying to load the keys at creating the entity object. This is the last action this wizard ever does:-(
I need help!!!
My environment is Win2k, Oracle8i Lite, Jdev 9.0.2.
Any ideas???Hi guys,
I downloaded 8iLite on my laptop just last week and had similar problems trying to log in to SQL Plus 8.0
This is what worked:
Upon install, Oracle provides us with a starter database called polite.odb - but to use this, you must do the following.
1. Open the ODBC Data Source Adminstrator, click on Drivers tab to make sure that Oracle Lite 40 ODBC Driver is present.
2. Click on the User DSN tab, click on Add, select Oracle Lite 40 ODBC Driver, and type the following:
Data Source Name: POLITE
Description: (whatever)
Database Directory: (this should be your Oracle Home directory) for example: D:\orant\oldb40
Database: polite.odb
now you can log into SQL PLUS like so:
Username: SYSTEM
Password: (type anything here) for example: abc
Host String: ODBC:POLITE
for further info, look at: http://technet.oracle.com/products/8i_lite/
documentation -- user's guide -- before you begin -- Installing Oracle Lite -- using the starter database
Good Luck!
null -
Hello.
I'm testing Oracle8i Lite 4.0 with PalmIII and I have problem. I
try to install demo database ADDROLRL4P. All is OK, but when I
hotsync data between Palm and PC I get hotsync error:
Consolidator Error:
java.lang.NumberFormatException: 3,00
and no data synchronize.
Where is problem?
Thank you very much for your answer.
J. Fikker
nullHello,
i will do this within next day's, i will report you what happen's
in my enviroment.
But in advance, i had a similar problem with a other Pilot
application. I had to upgrade my palm OS. Do you have the newest
version ?
See www.palm.com
Wolfgang
null -
Is it possible to use DB2 Everyplace or Oracle8i Lite to connect to palm?
Hi all,
I have read from articles on DB2 Everyplace and Oracle8i Lite that it is able to use as databases in Palm. So is it really possible to do it as i am not able to connect it.
If it is possible, how should i do it? I will really appreciate it very much if someone can answer me. Thanks!Hi all,
I have read from articles on DB2 Everyplace and
Oracle8i Lite that it is able to use as databases in
Palm. So is it really possible to do it as i am not
able to connect it.
If it is possible, how should i do it? I will really
appreciate it very much if someone can answer me.
Thanks!The current J2ME specifications (CLDC/MIDP) provides its own record store known as RMS. Currently, there is no J2ME API that is available for a developer with a MIDlet to connect to a native Palm database app such as the DB2 Everyplace or Oracle8i Lite installed on a Palm.
HTH.
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/ -
NT workstation and Oracle8i Lite
Hi,
I hope someone can help me with the following questions.
I've recently downloaded Oracle8i Lite and installed it on my NT workstation. It's no problem connection to the default db (odbc:polite). How do I do to start a TNS listener? I don't want to connect via the odbc-driver, I want to use the Net8 config to configure a data source, is it possible ? I gues the whole point is about starting a TNS listener but I can't find any command for doing the job.
I hope someone can help me!
//FredrikOK, I see.
Is the full product name Personal Edition ?
I wanted to install a "light" variant of Oracle8i and thought Oracle8i lite was the one for the job. If I install Personal Edition am I able to connect to my db with SQL*PLus using Net8, in short have a TNS listener ?
//Fredrik
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ikon:
Fredrik
The whole idea of Oracle Lite is ODBC. You need to install Personal Edition on NT.
Regards<HR></BLOCKQUOTE>
null -
Oracle8i Lite Demo install problem
Hi guys.
After download of Oracle8i lite demo and runing Setup.exe i just get the following error:
ORAINST caused an invalid page fault in
module OIBKND32.DLL at 0167:00bead01.
Registers:
EAX=00000400 CS=0167 EIP=00bead01 EFLGS=00010202
EBX=00ca9cb5 SS=016f ESP=0064dd58 EBP=0064f030
ECX=0064f148 DS=016f ESI=00000057 FS=212f
EDX=bff76855 ES=016f EDI=00ca9cb5 GS=0000
Bytes at CS:EIP:
c6 04 38 00 75 18 8b 44 24 20 50 ff 15 50 43 bf
Stack dump:
0064f030 00ca978c 00da0ed0 00ca9cb5 5c000100 00000001 00000400 00000001
c29b7170 00000001 41524f24 00454c43 41524f24 00454c43 00c2e4ee 00000100
This is happening on 2 different PCs, so
please help.
Sinisa Perovic
nullYou must reinstall your Oracle 9iLite.
Best regards,
Simone -
Problem by connect to Oracle8i Lite
Can`t connect to the default SID (ORCL), when installing Oracle8i Lite.
The following error occurs:
- using the BEQuest-Protocol: ORA-12203.
- using the TCP-Protocol: ORA-12224.
Has Oracle8i Lite only one NT-Service ("Oracle%ORACLE_HOME_SERVICE%ClientCache80")? Oracle8i has some more NT-Services: TNS Listener, Context Listener, ...
nullTry system/manager@odbc:polite to connect because OLite does not install a Listener-Process.
A. Helbig -
OCA-30002 Error, SQL-Plus 8.0.5, Oracle8i Lite
I had install Oracle8i lite and Developer 6.0
After installing "Required Support Files" v.8.0.5.1.0 (from
Developer) instead "Required Support Files" v.8.0.5.0.0 I cant
start SQL-Plus. It raise Error code OCA-30002 when trying
connect to system/dummy@ODBC:POLite.
This problem exist on Windows 95 and Windows NT.
nullOrder by cannot be used in a subquery while for inline view it is supported but in Oracle8i, release 8.1 and up
Khurram -
Installation Oracle8i Lite on Windows95
Hi,
I recently downloaded Oracle8i Lite on my home machine (Packard Bell 166MHz,Windows95) to start with Oracle database, and immediately got a problem on running Setup. As I'm accepting defaults:
Name: DEFAULT_HOME
Location: C:\orawin95
Language: English
the message: "win32.stp(1066) Invalid instantiation string in instantiate()" appears on the screen.
Appreciate your help on resolving this issue.
Luba Grechko
[email protected]Try the 8iLite discussion forum
iSQL*Plus Team -
JDeveloper 2 and Oracle8i Lite
Hello,
I'm trying to connect to an 8i Lite using the 8i Lite JDBC
driver in JDeveloper 2.0, but it keeps telling me that it can't
find the driver anywhere. The documentation says to add the JAR
files to the library. The location of the 8i Lite JAR files is
set in the CLASSPATH. Even if I add location of the JAR files
to the project library it doesn't seem to find it. Is there
anyone out there who can help me out?
Thanks in advance.
Kind regards,
Eric Sirois
nullHi
Oracle JDeveloper can use the driver which comes with Oracle8i
Lite to connect to the Oracle8i Lite database. To configure
Oracle JDeveloper to work with the Oracle8i Lite database:
1. Install JDeveloper.
2. Install Oracle8i Lite 4.0 or higher.
3. Launch JDeveloper.
4. Add a library for Oracle Lite by following these steps:
Choose the menu option Tools | Default Project Properties.
Click the Libraries button at the bottom of the dialog.
Click the New button on the lower right to add a new library.
Name the library Oracle8i Lite by typing in the Name field.
Add the path to the Oracle8i Lite driver by typing in the Class
Path field.
This should be a jar file called
<oracle_home>\lite\classes\olite40.jar, but
check the documentation for your version of Oracle Lite.
If you are using JDK1.1, you also need to add
<oracle_home>\lite\classes\oljdk11.jar to the Class path
Click OK to add the Library. JDeveloper analyses the dependencies
for the > driver and returns to the Default Project Properties
dialog.
Click Add to add Oracle Lite to the default project properties
for all future generated projects. Alternatively, you may add
the Oracle Lite driver on a project by project basis by
selecting Project | Project Properties
and adding the newly created library to the current project.
5. Quit JDeveloper.
6. Add the Oracle Lite jar file to the IDE Classpath by following
these steps:
Open the file <jdev_home>\bin\jdeveloper.ini.
Under the section [Java_Global], add the path of the Oracle Lite
drivers to the IDEClassPath. This should be jar files called
<oracle_home>\lite\classes\olite36.jar and
<oracle_home>\lite\classes\oljdk11.jar, but check the
documentation for your version of Oracle Lite.
7. Restart JDeveloper.
regards
Eric Sirois (guest) wrote:
: Hello,
: I'm trying to connect to an 8i Lite using the 8i Lite JDBC
: driver in JDeveloper 2.0, but it keeps telling me that it can't
: find the driver anywhere. The documentation says to add the
JAR
: files to the library. The location of the 8i Lite JAR files is
: set in the CLASSPATH. Even if I add location of the JAR files
: to the project library it doesn't seem to find it. Is there
: anyone out there who can help me out?
: Thanks in advance.
: Kind regards,
: Eric Sirois
null -
[b]Stream Corrupted Exception with ORACLE8i LITE[/b]
Our application on the client needs to insert word documents in the form of BLOBS in the ORACLE I LITE database.
I am using the below JDBC driver to store and retrieve the BLOB from the database and i have the ODBC driver for the Oracle LITE installed on the machine.
String jdbcURL = "jdbc:Polite:egcaspacclient";
String uid = "system";
String passwd = "***";
String driver = "oracle.lite.poljdbc.POLJDBCDriver";
But i try to read the BLOB from the database i am getting a streamCorrupted exception while reading the StreamHeader. I am using ObjectInputStream and ObjectOutputStream to store and retrieve the BLOB information.
I infact tried the same code with the ORACLE8i database and it is working.
I read some documentation that Oracle LITE supports storing the BLOBS.
I am wondering if anything wrong with the driver i am using.
Also the datatype in the BLOB column of the database is showing as undefined. But i see some information is stored to that column when i insert the BLOB.
I would appreciate if anybody provide with some clues.
Thanks
SurendraThis forum is meant for discussions about OTN content/site and services.
Questions about Oracle products and technologies will NOT be answered in this forum. Please post your product or technology related questions in the appropriate product or technology forums, which are monitored by Oracle product managers.
Product forums:
http://forums.oracle.com/forums/index.jsp?cat=9
Technology forums:
http://forums.oracle.com/forums/index.jsp?cat=10
As a general guideline, please first search the forum to see if your question is already answered. You will find answers for the most frequently asked questions by simply searching the forum. This will help you to find the answer right away and will save time for all of us.
Maybe you are looking for
-
How do I get an actor to wait for its nested actors to stop running before stopping itself?
I'm developing a series of projects that are based on the Actor Framework and my actor dependency hierarchy is starting to get some depth. One of the issues I'm facing now is making sure that each actor will only stop running (and signal this via a L
-
Hi, I am getting ST22 dump CALL_FUNCTION_ACCEPT_FAILED. Dump details are as under: ~ Runtime Errors CALL_FUNCTION_ACCEPT_FAILED Date and Time 28.08.2007 17:50:38 ShrtText Error when starting a Remote Function Call (ACCEPT). What
-
Start BPM instance from soapUI
Hi all, I want to start an instance of a BPM process by using soapUI. I enabled WS-RM and WS-A but I get the following error: <SOAP-ENV:Envelope xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xm
-
IMac freezes with every other click
I am new to the community and hope to find help for a big problem. I run OS Yosemite 10.10.1 on my 2010 iMac 2.93 i7 (upgraded to 12GB RAM a year ago). For the past 5 days it gives me the colorful wheel of death almost with every second click. I cann
-
Separate Jabber account to control presence?
I have a customer that wants admins or secretaries to be able to control their Presence. Is there a way to configure a separate profile that can't see messages but can control the account's presence?