Using JNI i am writing sample program i am getting the erro in jni.h

Hi,
i am writing sample programs using JNI interface while compliling the c program i am getting the error in jni.h file.
wherever the JNICALL has in jni.h i am getting the error that particular line.
can anyone help me on this regard?
Thanks
Balaji

baalu999 wrote:
Hi Thanks a lot for your update
i found the correct Jni.h now i was able to compile my c program but i was unable to create .dll file in mainframe environment. can you please help me in this regard.No, because that makes no sense.
A dll runs on windows. Nothing else.
If you can't figure out how to create a dll then that is a windows question. And a windows forum works for that.

Similar Messages

I have downloaded adobe camera raw 8.7 . Closed all adobe programs . Reopen PS cc6 , it is still using camera raw 8.2 . How can I get the updated plug in to become active ?

I have downloaded adobe camera raw 8.7 . Closed all adobe programs . Reopen PS cc6 , it is still using camera raw 8.2 . How can I get the updated plug in to become active ?

Please clarify your version of Photoshop.
There is no CC6.
There is
Photoshop CS6
Photoshop CC
Photoshop CC 2014
Also, what is your operating system?

I updated to the newest version of itunes, now I cannot open the program. I get the message "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes". What now?

I updated to the newest version of iTunes and now I can not open the program. I get the message "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes". What now? I'm using Windows Vista.

Had same problem and solved it without having to reinstore any music or movies:
1. Delete old Library file
2. Go to the 'Previous iTunes Libraries' folder and copy one of the earlier files - note, they have a date extension, e.g. 'iTunes Library 2011-11-01'.
3. Paste this file in your iTuners folder and rename file by removing the date extension - 'iTunes Library'
You should have all your music and paylists in tact, unless it was a really old previous file.

While running the BPM servlet Sample I am not getting the Mail.

Hi
I am using the downloaded 30 day evaluation copy of WebLogic Integration 2.1
I've got one issues regarding Data Integration Servlet Sample.
While running the BPM servlet Sample I am not getting the Mail.Even I don't know whether workflow is getting started or not.
Suppose My SMTP Server IP Address is 123.456.78.90 , then what should I write for mail.host=
Anyone Please

You cannot remove or change the old ID. This is Find My iPhone Activation Lock. You need to recover the credentials for the Apple ID originally used to activate the iPad.
Check your spam and junk folders.

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

I have a JVC video camera and it records the video to a .mod format (which Apple devices don't support). I figured out how to get them to iPhoto using iMovie but I want to be able to get the videos on my iPad 2 but it won't let it sync. Any help?

Thanks for that. Much more constructive than the last comment. It's only the restriction code I can't recall, not the access passcode. So I can currently access the device, just not age restricted content. Does that's make a difference? I also wondered if anyone knew how many attempts you get to try to get it right. Now tried 21 times and so far nothing bad has happened but I am concerned I'll eventually be completely locked out of the device. That doesn't seem in the spirit of things though. Surely it's foreseeable that a child could repeatedly try to guess the code so I can't see that it would be right to lock the device down completely in that circumstance, particularly if the access code is being typed in correctly every time.
Thanks

I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices

I have a new ipad and a iphone 5 which are under same Apple ID. I lso have a macbook that uses an older apple ID. How can I get the macbook to have same Apple ID as the other 2 devices

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

I am using a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). How can I get a faster response?

I am trying to create a virtual engine within a timed while loop and am unable to get the loop to run at a speed of less than 1ms (I am currently using the Wait(ms) function). This does not however allow realistic engine speeds. How can I overcome this? I have access to a PCI-MIO-16E-4 board.

andyt writes:
> I am using a timed while loop and am unable to get the loop to run at
> a speed of less than 1ms (I am currently using the Wait(ms) function).
> How can I get a faster response?
>
> I am trying to create a virtual engine within a timed while loop and
> am unable to get the loop to run at a speed of less than 1ms (I am
> currently using the Wait(ms) function). This does not however allow
> realistic engine speeds. How can I overcome this? I have access to
> a PCI-MIO-16E-4 board.
Andy,
Unless you use a real time platform, getting extactly 1 ms loop rate
(or even less) is impossible. It starts getting troublesome at about
0.1 Hz for standard operating systems.
I'd tackle your problem with "if i mod 10 == 0 then sleep 1 ms".
Of
course this is jerky by design.
HTH,
Johannes Nie?

I have iphone 6 plus. When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

I have iphone 6 plus (IOS 8.0.2). When i am connecting it to my Hyundai Grand i10 using Bluetooth and trying to call someone, unable to get the ringing sound. Sound comes only when the person receives a call.

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

I am using iphone 5s, glass got broked, where can i get the original panel and what would be price

i am using iphone 5s, glass got broked, where can i get the original panel and what would be price

If you are from India ,here is how you get Out of Warranty service in India
Out-of-Warranty Service
Please contact an iPhone Authorized Service Provider for out-of-warranty service options.

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

I am having problems using mov files imported into a project. I get the message "Not rendered" in the Canvas and clip won't play. Can anyone help?

When clips won't play without rendering in the Timeline, it usually means that the clip's specs don't match the Sequence settings.
A .mov file could be made from any number of codecs; the QuickTime Movie designation is merely a container for video files of all kinds. Since FCE only works with the QuickTime DV codec and the Apple Intermediate Codec (AIC) natively, if your mov files aren't one of those two, you need to convert them PRIOR to importing into your FCE project.
-DH

I lost my iphone 5 and i don't have i tunes.can i use my phone number or any other way to get the serial number?

i lost my iphone 5 and i don't have i tunes.can i use my phone number or any other way to get the serial number?

No.
Serial number is available If you have:
1. The iPhone box when you bought it, if you still have it.
2. The receipt, where you bought the iPhone
3. Computer iTunes, if you have synced or backuped the iPhone.
4. https://supportprofile.apple.com if you have iPhone registered

How to get the erroe message, if i run java program using .bat file

Hi,
I have a java file which accepts two inputs as command line argument. I want to make this pgm a tool. So have created a *.bat file which has the following command
java myprogram arg1 arg2
I'm gonna share this program with others. So i'll keep the class file and the .bat file in a commaon folder. All the users have to do is, edit the .bat file to give his/her args and run the .bat file. The pbm is, if the user input is not valid, I have put displays in the pgm to show it.
But if i run thru .bat, I'm not getting the error message or I don't know where it is getting displayed.
Can anyone help me with this ?
Thanks,
Mary

When i run from the console, I can see the output.
But, when i double click on the .bat file from the
folder, it runs fine and i couldn't see the output.
nullThat's because the error message is printed, and then the console is closed. The message is there but you need to read really really fast :)

I can't use firefox after upgrading to 4.0. I get the message I have to restart my computer for upgrading, but ik doesn't start. I get the message over and over

I can't open firefox after upgrading to 4.0
I get the message over and over again that i have to restart my computer for upgrading to firefox.
I tried new installation. But i got problems on all my accounts

Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access.

In SQL Loader based Concurrent Program, how to get the current request id

Hi All,
I am trying the following control file.
OPTIONS ( SKIP = 1 , ERRORS = 0 )
LOAD DATA
INFILE *
REPLACE INTO TABLE XXPA_ASSET_TRANS_INTERFACE
FIELDS TERMINATED by ',' OPTIONALLY ENCLOSED BY'"'
TRAILING NULLCOLS
     Project_Number
     ,Asset_Name
     ,Location_Country Constant USA
     ,request_id CHAR "fnd_global.conc_request_id"
in request id column I am getting -1 ...
Please lt me know how can i get the current request id in the request_id field.
Thanks

Hi
To my knowledge, this can't be achieved with SQL*Loader concurrent programs. Depending on what You are using the request id, the options provided may be useful.
I had a similar issue, requiring the use of user_id and login_id for who columns, and the solution applied was:
- Define a template for the control file, with place holders for the additional info:
user_id constant "x_user_id"
- Create a shell to receive the additional info as parameters, and use sed to change the template file to generate the control file, using the parameter to replace placeholders.
Create a request set to launch the shell concurrent program and then the sql loader program, whose control file now has the additional information required.
Caution when more than one middle tier node is used.

Using JNI i am writing sample program i am getting the erro in jni.h

Similar Messages

Maybe you are looking for