VMWARE not working after latest kernel upgrade [SOLVED]

I've done a kernel update and after rebooting VMWare was not working. That's "standard", I figured, because I have a new kernel.
So, I run the any_any patch (as usual) to re-configure the VM to the new kernel but this time no joy
Is there anyone else having the same problem?
The error seems to be here:
In file included from /tmp/vmware-config0/vmmon-only/common/hostKernel.h:56,
from /tmp/vmware-config0/vmmon-only/common/task.c:24:
include/asm/page.h: In function 'pte_t native_make_pte(long unsigned int)':
include/asm/page.h:112: error: expected primary-expression before ')' token
include/asm/page.h:112: error: expected ';' before '{' token
include/asm/page.h:112: error: expected primary-expression before '.' token
include/asm/page.h:112: error: expected `;' before '}' token
make[2]: *** [/tmp/vmware-config0/vmmon-only/common/task.o] Error 1
make[1]: *** [_module_/tmp/vmware-config0/vmmon-only] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.22-ARCH'
make: *** [vmmon.ko] Error 2
make: Leaving directory `/tmp/vmware-config0/vmmon-only'
Unable to build the vmmon module.
R.
Note: Running /usr/bin/vmware-config.pl is of no help either (same error).
Last edited by ralvez (2007-07-28 13:58:06)

stonecrest wrote:Yes, and the PKGBUILD works;
You'd rather say "I, myself, me, thinks it works".
Because it does not work for many people, including me.
The modules do build with kernel 2.6.22.X, but the network behaviour using bridged networking is extremely clumsy (used to work fine with 2.6.21.X), and shared folders are a pain in the butt- for example whenever I try to copy a file from the guest to a host shared folder, the guest OS (winXP) comes close to totally freezing, and I have to kill explorer to stop the transaction.
Do you call THAT "works"?
IMO the issues with kernel 2.6.22 won't be addressed before a new VMWare version is out... Until then, yeah... the old version/PKGBUILD works...
I'm close to ditching VMWare in favour of VirtualBox, but a couple of VMWare features (mainly related to low level hardware access) still prevent me from doing so.
Last edited by scarecrow (2007-07-29 13:31:51)

Similar Messages

  • Not booting after latest kernel upgrade x86_64

    The new kernel 2.6.23.9 refuses to boot - spits out something about filesystems, says cd rom sata all (hooks) ndiswrapper, forcedeth blah blah, continously call traces happening but not booting. Not even in fallback mode.
    I will try to boot thru live CD, but what should I alter? mkinitcpio.
    This is on 64 bit only. My 686 desktop does not have this issue (atleast one of them). The other one I am using now. I don't want to upgrade this too and become incommunicado as the other desktop is in the office.
    This is happening too often with Arch nowadays. It automatically upgraded the nvidia module and asked me to log out of X and remove the module manually. But I chose to reboot and this is what happened.

    Actually it is screwing up at the loading modules stage
    it says bug soft lockup cpu#0 stuck for 11s [rc.sysinit:1782]
    modules linked in ndiswrapper forcedeth ext3 jbd mbcache sd_mod sr_mod cdrom ehci_hcd usbcore sata_nv ata_generic pata_amd libata
    Pid : 1782 comm: rc.sysinit Tainted: P       D:  2.6.23-ARCH#1
    Then a lot of gibberish about RIP etc. This is continuously looping

  • Wifi not working after latest iOS update

    wif not working after latest iOS update 7.0.4.  Any suggestions?

    Same happening to my iphone no wifi or bluetooth since latest update tryed everything reset restore reset back to factory setting all to no avail phoned apple they want 155 pound for a replacement (cheeky #$%/$$#@) when everyone knows its there fault .i read phone may need new wifi chip if its out of warrenty cheaper to take to local phone doctor

  • Most of my apps do not work after 3.1 upgrade

    Most of my apps do not work after 3.1 upgrade. I have done a softboot 2 times and they still willnot connect.

    Are you running the current version of the 3rd party apps on your iPhone - have you checked for app updates with iTunes on your computer?

  • Beats Audio Control Panel software not working after Windows 10 upgrade.

    Beats Audio Control Panel software not working after Windows 10 upgrade.  the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties  I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device?  IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

    Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at  https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver.  I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update.  After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

  • VMware wont start after latest kernel update!

    Okay when i went to reboot it went to boot into arch but wile it was loading the vmware modules it would stay stuck at loading vm communication interface socket family and would just stay there the only way i could even boot into arch was to edit my grub so i could login and at least comment out vmware i tried to reapply the vmware patch fix that was on the wiki and had no luck also tried reinstalling + reapplying patch after words and still no luck I'm hoping this is happening to someone else as well and not just me (mean i know lol) I also tried virtualbox but seems it has it's own mess of problems as well after latest kernel update.

    I have tried rebuilding the the kernel image and even tried reinstalling grub with no luck.  After not having a usable system for several days I ended up just having to reinstall and maybe found out more about the problem.  Using the net install image and a 64 bit install this time making a EXT2 boot and a root partition of JFS right after install I get a panic during boot about how the system can't find a valid filesystem on what would be root partition.  Even when passing the "rootfstype=jfs" to the kernel line in grub it still errors out telling me that it is "Bailing out, your on your own.  Good luck!" (pretty funny error messages if you are not ripping your hair out).  After that I redid the install this time making a EXT4 root partition and everything is working.
    It seems to me that this all points to a problem with JFS on 64 bit systems, my other systems are all 32 bit and usign JFS root just fine... can anyone else confirm this?
    Last edited by vendion (2011-01-12 13:39:56)

  • Usb wireless mouse not working after latest -Syu

    after todays kernel upgrade to :
    Linux archie 3.7.4-1-ARCH #1 SMP PREEMPT
    my usb mouse is not working anymore, The touchpad still works fine
    lsusb: Bus 002 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
    any ideas?

    resolved: alternate usb-wireless mouse works fine - it's the battery!!
    oh well

  • Iphone 6 plus facetime camera not working after 8.1 upgrade

    iphone 6 plus facetime camera not working after ios 8.1 upgrade, also while making calls the voice on the other side sounds distant. Any pointers.

    It seems the facetime camera does not work for whatsapp only it works normally.

  • IBooks bookmarks not working after 1.2 upgrade

    I have noticed the bookmarks on my iPad iBooks are not working after upgrading to 1.2 today.
    I am unable to bookmark pages when I need to. It only works sporadically.
    I have also noticed when closing a book and reopening, the book opens at last bookmarked page instead of last page read.
    Please advice about any fix.

    Same problem here, Bookmark always worked properly before iOS 5. I too noticed this while reading Steve's biography, ironic??
    I have noticed that besides it appearing on previous page, that if I turn to lanscape and chose the bookmark it is appearing on the right of the second page of the two that appears as should be. So I wonder if this is some problem of formating between landscape 2 page view and the single page portrait view?
    My two cents but this is sure annoying!  I have not seen it jump back like some noticed however, just previous page in portrait view!

  • Apple tv not working after latest update

    apple tv not working after installing latest update.

    I have the latest update of the Remote app on my iPhonne but still no AppleTV icon visible.
    how can I do a roll back on my Apple TV?

  • Amd video drivers not working after win 10 upgrade

    AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again.  Alienware here i come.

    Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad.  FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

  • Z580 Dolby digital plus not working after Windows 10 upgrade

    Dolby Digital Plus is not working after I installed Windows 10 upgrade, I've tried several things to fix the problem with no luck, has anyone else experienced the same problem and found a fix ???

    Hi,I have tried by switching dolby on but its not showing any difference. The app is installed but not working you can do on/off, set equlaizer but it doesnot show any effect. Recently i have upgraded to windows10.I used to love the Dolby experience but now its not working and its really disappointment for music lovers & gamers. Please provide any help on this issue. ThanksGopal

  • TS2621 why my outgoing mail server not working after ios 6 upgraded

    why my outgoing mail server not working after ios 6 upgraded

    Ask your carrier to send you the settings over wifi and then install them that way.
    I'm on giffgaff and I used the giffgaff app from the store to sort this out.
    Overall though I must say Apple has let itself down on this as why isn't something written in the ios script that keeps the original settings??
    Very Poor indeed and I held off using Apple products for years for this very reason!!

  • Some Widget does not work after latest upgrade

    Today is July 23rd, 2011. By recent latest upgrade, mainly for supporting Lion, where I am still using Snow Leopard 10.6.8, some widget does not work, including Battery Meter, Digital Clock Alarm, Victoria Digital Clock, etc.
    By the way, my company use Chatter and I installed Chatter Desktop. Again, after recent upgrade, it no longer work anymore.
    Do you experience the same problem?
    For those who has upgraded to Lion, do you also find some widget does not work?

    I have read a couple of complaints like that, but not sure it's widespread.
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    Then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
    If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it.

  • OneKey Overclocking Not Working After Windows 10 upgrade

    I upgraded my OS to Windows 10, and after the instalation, I realized that  when i press the OVERCLOCK button on my to  on my desktop to run the overclock it doesnt light up or run  nor can i run the aplication when i click it on my computer (the one that allows me to switch from basic, extreme etc.) I would really appreaciate some help with this. Thanks  (My Desktop is a Erazer x510 desktop 10140)

    Lenovo Pls solve this Issue quickly this is one the main reasons I bought this machine and now its not working just sent out some privet msgs to lenovo tech staff i hope they answer with a fix.

Maybe you are looking for

  • In WE19 getting error Message as Function module missing

    Hi Friends, I need to debug the Inbound function module so in WE19 i am providing the IDOC number and clicking on the Inbound function module then i am getting pop-up i am able to select my function module name and checking the Fore ground processing

  • Preparing 16:9 graphics from 720x480 files

    Hello, I have a demo reel type DVD project in which all the tracks have the same titling. However, one of the tracks differs from the others in that it is 16:9. The client wants the titling within trackt sized so that it maintains the same absolute s

  • Transparency issue flash please help

    Has anyone come across transparency problem with png's and animations in flash player 9.0.115.0 ? They seem to be showing a semi transparent white box around the png or animation is this an issue with the flash player or something else? transparency

  • Retrive Cookie Information in the Apache Access Log Files

    Hi All, Can anyone give me the solution or any link to follow the steps for retriving cookie information and user information in the Apache Access log files using httpd.conf file. we are using Oracle Appserver 10.1.2 Version and we have specfied belo

  • Pdf Presentation

    Just upgraded from cs2 to cs5, where the heck is pdf presentation at? (company made me) (expected to do the same things in cs5 that i did in cs2 and they removed cs2) Don't tell me use bridge, cause it don't work. (doesn't embed fonts or vector data)