What's the 'best practice' way to get email and fax number from vendor?

Hello *,
could anybody let me know what the 'best-practice' is to get the fax number and smtp address from the vendor master? Is there a preferred function module I should use?
Thanks a lot,
Torsten

Hi ,
try that:
TYPE-POOLS: szadr.
DATA adr_kompl TYPE szadr_addr1_complete.
DATA adr1 TYPE szadr_addr1_line.
DATA adtel TYPE szadr_adtel_line.
DATA admail TYPE szadr_adsmtp_line.
DATA adfax TYPE szadr_adfax_line.
CALL FUNCTION 'ADDR_GET_COMPLETE'
       EXPORTING
            addrnumber              = lfa1-adrnr
       IMPORTING
            addr1_complete          = adr_kompl
       EXCEPTIONS
            parameter_error         = 1
            address_not_exist       = 2
            internal_error          = 3
            wrong_access_to_archive = 4
            OTHERS                  = 5.
* Mail
LOOP AT adr_kompl-adsmtp_tab INTO admail.
    MOVE admail-adsmtp-smtp_addr TO atab-mail.
ENDLOOP.
* fax
LOOP AT adr_kompl-adfax_tab INTO adfax.
    MOVE adfax-adfax-fax_number TO atab-fax_number.
ENDLOOP.
regards Andreas

Similar Messages

App store icon gone what's the best/ easiest way to get it back?

App store icon is gone what's the best / easiest way to get it back?

Sophia,
Be sure to look closely for the app in all of your user created folders.

What is the best practice for creating master pages and styles with translated text?

I format translated text all the time for my company. I want to create a set of master pages and styles for each language and then import those styles into future translated documents. That way, the formatting can be done quickly and easily.
What are the best practices for doing this? As a company this has been tried in the past, but without success. I'd like to know what other people are doing in this regard.
Thank you!

I create a master template that is usually void of content, with the exception I define as many of the paragraph styles I believe can/will be used with examples of their use in the body of the document--a style guide for that client. When beginning a new document for that client, I import those styles from the paragraph styles panel.
Exception to this is when in a rush I begin documentation first, then begin new work. Then in the new work, I still pull in those defined paragraph and or object styles via their panels into the new work.
There are times I need new styles. If they have broader applicability than a one-off instance or publication, then I open the style template for that client and import that style(s) from the publication containing the new style(s) and create example paragraphs and usage instructions.
Take care, Mike

What is the best practice to create IDM user and target accts via recon

usecase:
LDAP<--->idm---->AD.
User exists in LDAP. IDM and AD are empty. Need to create IDM user and AD acct from LDAP data.
I can recon against LDAP and create the IDM user. But I cannot create AD acct in the same recon process. What is the best practice to do the above.

i think you have to have a "Per-account Workflow" set which creates the user in AD.

What is the best practice way of stopping a sub-domain from being indexed?

Hi there
I notice that a client site is being indexed as both xxx.com.au [their primary domain] as well as xxx.PARTNERDOMAIN.com.au.
I have Googled quite a bit on the subject and have browsed the forums, but can't seem to find any specific best practice approach to only having the primary domain indexed.
One method that seems to be the most recommended is having a second robots.txt site for the sub-domain xxx.PARTNERDOMAIN.com.au with Disallow: /
Does anyone have a definitive recommendation?
Many thanks
Gavin

Sorry I assumed they were two different sites, they are the same "content" just two different URLs?
Canonical links will help but it wont stop or remove you being indexed it only adds higher index weight to the Canonical linked URL. Plus only search engines that support that meta tag will work.
You essentially need two robots.txt to do this effectively or add the META TAG if you can split the sites somehow.
There is a more complex way, you could host the second domain somewhere else, use htaccess or similar to do a reverse proxy to the main site to pull the contents in realtime, all except the robots.txt file. This way you could have two sites with only 1 to update but still have two robots.txt's
http://en.wikipedia.org/wiki/Reverse_proxy
I've done this for a few sites, you are essentially adding a middle man, it will be a tad slower depending on how far the two servers are apart, but it is like having a cname domain but with total control.

What is the best practice to connect 2 sites and replicate ADDS between 2 different sites using windows server 2012 r2?

I found that there is new features remote access inside windows server 2012 r2 which is much more easier. Is there anybody can suggest me how to connect 2 different sites and it will be the tunnel to replicate ADDS (RW) between both sites.

See this
https://social.technet.microsoft.com/Forums/windowsserver/en-US/133e7780-6a59-4bd7-906b-70830bea48d0/sites-connections-best-practice?forum=winserverDS
Regards,
Biswajit
MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
Blog:
Script Gallary:
LinkedIn:
Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

What is the best practice to get thumbnail of photo which I get from cameraUI

Hi,
I building a photo sharing application in android and I want to upload a smaller size of photo just after I receive the photo from the cameraUI.
What is the best practice to resize the photo and to upload it, At the moment I doesn't resize it And the file size is big (1MB) for HTC DESIRE HD ?
Is it possible to resize the image and keep the EXIF data ?
Thanks,
Nimrod.

Yep,
Media Manager is the way to go.
Read the manual aout it.
It is all explained in there.
Rienk

What is the best practice for full browser video to achieve the highest quality?

I'd like to get your thoughts on the best way to deliver full-browser (scale to the size of the browser window) video. I'm skilled in the creation of the content but learning to make the most out of Flash CS5 and would love to hear what you would suggest.
Most of the tutorials I can find on full browser/scalable video are for earlier versions of Flash; what is the best practice today? Best resolution/format for the video?
If there is an Adobe guide to this I'm happy to eat humble pie if someone can redirect me to it; I'm using CS5 Production Premium.
I like the full screen video effect they have on the "Sounds of pertussis" web-site; this is exactly what I'm trying to create but I'm not sure what is the best way to approach it - any hints/tips you can offer would be great?
Thanks in advance!

Use the little squares over your video to mask the quality. Sounds of Pertussis is not full screen video, but rather full stage. Which is easier to work with since all the controls and other assets stay on screen. You set up your html file to allow full screen. Then bring in your video (netstream or flvPlayback component) and scale that to the full size of your stage (since in this case it's basically the background) . I made a quickie demo here. (The video is from a cheapo SD consumer camera, so pretty poor quality to start.)
In AS3 is would look something like
import flash.display.Loader;
import flash.net.URLRequest;
import flash.display.Bitmap;
import flash.display.BitmapData;
import flash.ui.Mouse;
import flash.events.Event;
import flash.events.MouseEvent;
import flash.display.StageDisplayState;
stage.align = StageAlign.TOP_LEFT;
stage.scaleMode = StageScaleMode.NO_SCALE;
// determine current stage size
var sw:int = int(stage.stageWidth);
var sh:int = int(stage.stageHeight);
// load video
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
var vid:Video = new Video(656, 480); // size off video
this.addChildAt(vid, 0);
vid.attachNetStream(ns);
//path to your video_file
ns.play("content/GS.f4v");
var netClient:Object = new Object();
ns.client = netClient;
// add listener for resizing of the stage so we can scale our assets
stage.addEventListener(Event.RESIZE, resizeHandler);
stage.dispatchEvent(new Event(Event.RESIZE));
function resizeHandler(e:Event = null):void
// determine current stage size
    var sw:int = stage.stageWidth;
    var sh:int = stage.stageHeight;
// scale video size depending on stage size
    vid.width = sw;
    vid.height = sh;
// Don't scale video smaller than certain size
    if (vid.height < 480)
    vid.height = 480;
    if (vid.width < 656)
    vid.width = 656;
// choose the smaller scale property (x or y) and match the other to it so the size is proportional;
    (vid.scaleX > vid.scaleY) ? vid.scaleY = vid.scaleX : vid.scaleX = vid.scaleY;
// add event listener for full screen button
fullScreenStage_mc.buttonMode = true;
fullScreenStage_mc.mouseChildren = false;
fullScreenStage_mc.addEventListener(MouseEvent.CLICK, goFullStage, false, 0, true);
function goFullStage(event:MouseEvent):void
    //vid.fullScreenTakeOver = false; // keeps flvPlayer component from becoming full screen if you use it instead
    if (stage.displayState == StageDisplayState.NORMAL)
        stage.displayState=StageDisplayState.FULL_SCREEN;
    else
        stage.displayState=StageDisplayState.NORMAL;

What is the best practice to perform DB Backup on Sun Cluster using OSB

I have a query on OSB 10.4.
I want to configure OSB 10.4 on 2 Node Sun Cluster where the oracle database is running.
When im performing DB backup, my DB backup job should not get failed if my node1 fails. What is the best practice to achieve this?

Hi,
Each Host that participates in an OSB administrative domain must also have some pre-configured way to resolve a host name to an IP address.Use DNS, NIS etc to do this.
Specify cluster IP in OSB, so that OSB always looks for Cluster IP only instead of physical IPs of each node.
Explanation :
If it is 2-Node OR 4-Node, when Cluster software installed in these nodes we have to configure Cluster IP so that when one node fails Cluster IP will automatically move to the another node.
This cluster IP we have to specify whether it is RMAN backup or Application JDBC connection. Failing to second node/another Node is the job of Cluster IP. So wherever we install cluster configuration we have to specify in all the failover places specify CLUSTER IP.
Hope it helps..
Thanks
LaserSoft

What is the best practice for BADI?

Hi all, this is my first post.
I've seen many BADI examples here at SDN and elsewhere where after defining the badi at SE18, and the implementation at SE19, you just create a Z program and call the badi and its method. No brainer. I know how to use the new badi of 'get badi' and 'call badi' instead of the classic exit handler. So I do know how to call a badi properly, in a Z program.
However, SAP's intention of BADI is to replace the traditional user exit. My question is how do you guys use badi in replacement of user exit?
User exits have 'call customer-functions' where you put your code in the Z includes, without touching standard SAP programs. Where/how do i link standard programs to call my badi? Even if I implement a standard bapi, my implementation is a Z. And a standard bapi and its methods are, well, standard. How do I call the Z stuff.
1. If using cmod, call customer-function and the z include to call my badi and method, how does that replace user exit if I'm still using cmod???
2. I've seen people add includes in a standard function-pool. The Z include calls the badi. But doing so is a modification, which I thought is to be avoided.
So my question is what is the best practice out there, how do you guys use badi for enhancement in replacement of user exit? In combination of cmod, adding includes in standard programs, other methods?

Hi Shawn,
Welcome to SDN
First thing, you got the whole concept of BADI partially wrong.
BADI are like user-exits only and the difference is it uses ABAP OO an some more functionalities.
As you find in the code CALL CUSTOMER FUNCTION, the same way there are exit handlers for BADI.
User Exits are not completely removed. They are still there and will be there. Its just the extra flexibility with BADI.
Regards,
Atish

What is the BEST practice - use BO or Java Object in process as webservice

Hi All,
I have my BP published as web service. I have defined My process input & output as BOs. My BP talks to DB through DAO layer(written in JAVA) which has Java objects. So I have BO as well as java Objects. Since I am collecting user input in BO, I have to assign individual values contained in BO to Java object's fields.
I want to reduce this extra headache & want to use either of BO or Java object.I want to know What is the best practice - use BO or Java object as process input. If it is BO,how I can reuse BOs in Java?
Thanks in advance.
Thanks,
Sujata P. Galinde

Hi Mark,
Thanks for your response. I also wanted to use java object only. When I use java object as process input argument..it is fine. But when I try to create Process web service, I am getting compilation error - "data type not supported".....
To get rid of this error, I tried to use heir (BO inheriting from java class). But while invoking process as web service, it is not asking for fields that are inherited from java class.
Then I created Business Object with a field of type java class... This also is not working. While sending request, it is giving an error that - field type for fields from java class not found.
Conclusion - not able to use java object as process(exposed as web service) input argument .
What is the Best & feasible way to accomplist the task - Process using DAO in Java & exposed as web service.
Thanks & Regards,
Sujata

What is the best practice to handle JPA methods in JSF app?

I am building a JSF-JPA web app(No EJB).
I have several methods that has JPA QL inside.
Because I have to put those methods inside JSF beans to inject EntityManagerFactory (am I right about this?).
And I do want to separate those methods from regular JSF beans which are used by page authors.
And I may need to use them in different JSF managed beans.
My question here is that what is the best practice to handle that?
I. write a or a few separate JSF Beans and inject them into regular Beans?
II. write a or a few separate JSF Beans and access them into regular Beans using FacesContext?
III. others?
Waiting to hear from you opinions.

You can create named queries on your Entities themselves then just call entityMgr.createNamedQuery("nameOfQuery");
Normally, we put these named queries in the class of the entity which will be returned. This allows for all information pertaining to a given entity and all ways of accessing that entity (except em.find() and stuff, of course) to be in one place. As long as the entity is defined in your persistence.xml file, any named queries which reside on that entity will be available through the EntityManager.
As for the EntityManagerFactory, we normally create an application scope bean which holds the factory itself (because this is a heavy-weight object) and then just get all EntityManager instances from that by injecting this bean into whatever needs it. For example, I might have:
//emfBB is the injected app scope bean which holds the entity manager factory.
private EmfBB emfBB;
private void lookupSomeData()
EntityManager em = this.getEmfBB().getEmf()
I hope this answered your question?
~Zack
Edited by: zmarr on Nov 6, 2008 1:29 PM

What are the best practices to replace a disk in 6140 ?

What are the best practices to replace a disk in 6140?
Regards

The best way is to follow CAM Service Advisor instructions.

What is the best practice for changing view states?

I have a component with two Pie Charts that display
percentages at two specific dates (think start and end values).
But, I have three views: Start Value only, End Value only, or show
Both. I am using a ToggleButtonBar to control the display. What is
the best practice for changing this kind of view state? Right now
(since this code was inherited), the view states are changed in an
ActionScript function which sets the visible and includeInLayout
properties on each Pie Chart based on the selectedIndex of the
ToggleButtonBar, but, this just doesn't seem like the best way to
do this - not very dynamic. I'd like to be able to change the state
based on the name of the selectedItem, in case the order of the
ToggleButtons changes, and since I am storing the name of the
selectedItem for future reference.
Would using States be better? If so, what would be the best
way to implement this?
Thanks.

I would stick with non-states, as I have always heard that
states are more for smaller components that need to change under
certain conditions, like a login screen that changes if the user
needs to register.
That said, if the UI of what you are dealing with is not
overly complex, and if it will not become overly complex, maybe
states is the way to go.
Looking at your code, I don't think you'll save much in terms
of lines of code.

What is the best practice to display info of completed task in process flow

Hi all,
I'm starting to study BPM modeling with CE7.1 EHP1. Thanks to the tutorial and example on SDN site and I can easily build my own process in NWDS and deploy to server, start it, finish it.
I like the new runtime which can show a BPMN diagram to the processors. However, I can't find a way to let the follow up processor to review the task result completed in previous step. I'm more familiar with Guided Procedure, and know there is "Display Callable Object" which can used to show some info of a completed task when the processor/owner/admin/overseer click on a completed task. Where is the feature in BPM ? What is the best practice to show such task information in BPM environment.
For example, A multiple level approval process, the higher level approver need to know the comment written by the previous approver. Can he read this information from process flow ?
I think it is very important feature for a BPM platform. In Guided Procedure, such requirement can be done with Display Callable Object + View Permission, and you just need some coding for the UI. If BPM is superior to GP, I think there must be a way to achieve this, I just do not know how ?
Can anyone shed me some light on it ?

Oliver,
Thanks for your quick reply.
Yes, Notes and Attachment CAN BE USED for the purpose. But I'm still looking for a more elegant solution.
With the solution of using Notes/Attachment, the processor need to give input at two places : the task UI and Note/Attach , with similar or same data. It is really annoying.
Is there any SAP BPM real-world deployment ? None of customer has the requirement ?

What's the 'best practice' way to get email and fax number from vendor?

Similar Messages

Maybe you are looking for