When printing from Preview, the document prints with large print and many lines added and pages added

When printing from Preview, the document prints with large print and many lines added and pages added. Why does this happen?

Thank you!!! That was the problem--scale was set at 200% (don't know why)--when I reduced it to 100% it printed perfectly.
Thanks again for helping me resolve this problem.

Similar Messages

  • When will apple fix the bending problem with iPhone 6 and 6 ?

    Does anybody know when new batches of the iphone 6 and 6 plus ,without the bending problem (bendgate), will be released ? I wanted to buy the iphone 6 but id rather wait till they fix the bending problem.

    theatreus wrote:
    I would like to calmly and rationally talk for a moment. On the internet and with people so invested in a company's products that can be hard to do. I find it very irritating reading people saying it is a hoax while I'm sitting here with a bent plus myself. First off, most people don't take major mainstream news companies seriously anymore. So CNNMoney isn't where anyone needs to be researching. However there are multiple other people who demonstrate this problem. So check YouTube and remember you'll find what you search for. So, if you search for iPhone 6 plus doesn't bend you'll find videos of people trying to prove it doesn't bend. It is getting ridiculous, XBOX VS PLAYSTATION, Creationists vs Evolutionists, iPhone vs Android. Seriously, I have a friend with an HTC One M8 and another friend who just got the regular iPhone 6. I told the guys about the reasoning behind the bend. "All aluminum bodied phones do it" my iPhone friends says yep that's true and my HTC friend comes over and asks me to bend his phone. I said no at first because i was afraid i might actually break it... He never put a case on his phone btw... He talked me into it and I couldn't bend it at my full force i barely saw it arch. After much more research I found out why that might be. THE ONE THING APPLE KEEPS PUTTING OFF. The screen on high end Android devices is Gorilla glass very hard to break and hard to bend. Maybe it is time I go back to Android. Logically they have better phones when you don't think about if its Apple or Android. Well I am sure I will get hate messages and grammer corrections and really intelligent comebacks but I don't care honestly.
    <Personal Information Edited by Host>
    Prove you have a bent Plus.  Post a picture, but be advised, I work for a technology company and if you post a picture of a bent phone that can be easily found through Google, I'll report you.

  • I have Acrobat 9 Pro and when I print hard copies of my PDF letters drop off from sentences throughout the document. Any idea why and how to fix this problem?

    I have Acrobat 9 Pro and when I print hard copies of my PDF letters drop off from sentences throughout the document. Any idea why and how to fix this problem?

    Hi,
    We’re using Windows 7 Professional, Service Pack 1 and system type is 32-bit operating system.
    Ange

  • Trying to print a document from Pages, when I go to print it won't let me select the document.  It is grey and I can't click it.  What should I do?

    Trying to print a document from Pages, when I go to print it won't let me select the document.  It is grey and I can't click it.  What should I do?

    I'm not clear on how you're trying to print. When you select Print from the file menu in Pages the current document is already selected. Perhaps you need to show the details in the print dialog. The first screenshot is from Mountain Lion the second from an earlier OS where you click the blue down-facing triangle button (sorry, I can't remember which one).

  • I want to create an external video widget with iAd. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.

    i want to create an external video widget with iAd to use in an iBook. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.
    hope someone can help!

    May have something to do with whether or not the URL can be reached while building your widget.  I've got a video on the web. When I enter the URL into the field for the video object and click to another field,  the URL is replaced with some text indicating that it is accessing the video then updates itself to displaying just the name of the video file.
    It shows just fine in preview and I can see the full path to the video when I export the widget so it should work for you. 
    Is the video accessible from your Mac while you're laying out your widget?
    -Mark

  • When importing from a Word document placing the text in InDesign

    When importing from a Word document placing the text in InDesign I can only see the text from the first page of the Word document. I have increased the number of pages in the Indesign document to more than what is in the Word document, still only text from the first page is shown. What am I doing wrong or did I not set a setting correctly?

    When you want to auto flow text while placing, hold down the Shift key when clicking with the Place cursor on the first page. New pages will be generated and text will be auto flowed using the margins set up on the master page.

  • When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

    When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

    TLCMediaDesign wrote:
    I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
    IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
    When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary.

  • When I send open office documents to a PC user (even saved and sent in the word format), the document reaches with serious format changes and is rendered unusable to the PC user. How to overcome the problem??

    When I send open office documents to a PC user (even saved and sent in the word format), the document reaches with serious format changes and is rendered unusable to the PC user. How to overcome the problem??

    I don't use OpenOffice (I have it on my internal just to play around with, but seldom even open it). I do use MS Word and have few problems sharing files - it's usually a font issue so I tend to use MS fonts for documents that I know will need to be shared.
    Unless you need to make collaborative changed to the document, you could always save it as a pdf file. With Acrobat Pro you can even save a pdf file to a Word document with very little change in formatting.
    If I were you - and you have a need for .doc or .docx files to travel and play nicely - I'd just invest in MS Office. If you don't have to send a Word file, try pdf.
    Clinton

  • Hi i recently created a document on iwork pages via my icloud account however when i click on the document now it doesnt seem like it saved the latest version? can anyone help with this?

    Hi i recently created a document on iwork pages via my icloud account however when i click on the document now it doesnt seem like it saved the latest version? can anyone help with this?

    Welcome to the Apple Community.
    Are you also trying to re-open it on the same device as you edited it.

  • My mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be?

    my mac is running slow, the spinning beach ball constantly appears. it seems that when i am in the apple store with fast wifi its a bit better. genius at the apple store checked the hard drive, it's all fine. what can it be? can it be a software issue with the wifi?
    also i noted that it has only been doing this since quite recently, before it was fine
    please help!

    First, back up all data immediately, as your boot drive might be failing.
    Step 1
    This diagnostic procedure will query the log for messages that may indicate a system issue. It changes nothing, and therefore will not, in itself, solve your problem.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|timed? ?o' | tail | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    A TextEdit window will open with the output of the command. Normally the command will produce no output, and the window will be empty. If the TextEdit window (not the Terminal window) has anything in it, stop here and post it — the text, please, not a screenshot. The title of the TextEdit window doesn't matter, and you don't need to post that.
    Step 2
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Reset the System Management Controller.
    Run Software Update. If there's a firmware update, install it.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    If you have a portable computer, check the cycle count of the battery. It may be due for replacement.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane. See whether there's any change.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you have a MacBook Pro with dual graphics, disable automatic graphics switching in the Energy Saverpreference pane for better performance at the cost of shorter battery life.
    Step 3
    When you notice the problem, launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the View menu or the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for User, System, and Idle at the bottom of the window.
    Select the Memory tab. What value is shown in the bottom part of the window for Swap used?
    Next, select the Disk tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in andWrites out.)
    Step 4
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard by pressing the key combinationcommand-C. Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Hiding buttons when printing and adjusting field to compensate

    Hi,
    I had a request for a form in which the Add a Row button and Delete Row button are hidden when printed to make it look a little nicer.  I was able to hide the buttons when printing, but the table that the delete is part of still looks odd and there is a larger space than I'd like to have between the tables once the add a row doesn't show.  Is there are a way to make things look nicer?  I've attached the demo of the form I'm working on a sample of what it looks like right now when I print.
    I did see a post about Hiding text field borders when printing and it sounded like I might need to do something similar, but I'm not quite sure what.
    Thanks!
    Image: https://acrobat.com/#d=HvU8V27oA*Ki6HzoI2Ec0w
    Form: https://acrobat.com/#d=1K*EfksEnAH0azzxTrx31w

    The easiest way to deal with the buttons down the side is to set the borders of those cells to none, then you don't have to worry about it - you will end up with a little extra space down the right side but the table will look finished when the buttons hide. This is how I do it, because the button takes the whole space of the cell I just don't put a border on it. Getting into hiding columns and shifting table size to fill the space is getting pretty tricky.
    To get the tables closer together when you print and hide the add row button, put the following script in the prePrint event of the button:
    this.presence = "hidden";
    And this script in the postPrint event:
    this.presence = "visible";
    Because the button is part of the flowed subform the table is in when you set its presence to hidden the subform will close the gap.

  • Exporting file to pdf from internet, the document its in blank or incomplete

    When i export a file to pdf from internet, the document is in blank or incomplete. Its the same if i donwload in a PC or opening online. The trouble is only in this PC, and i try with diferent browsers.
    I try deleting temporary files, upgrading a latest version of Reader and modifying the security configuration in the browser.
    Any idea?

    Hi da23841142,
    What are you using to export the file to PDF? Or, are you simply downloading a PDF file from the Internet, and then trying to view it in Reader? What version of Reader are you using, and are you on Mac OS or Windows?
    Best,
    Sara

  • My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB

    My IPOD Touch initially had a white screen.  I tried correcting this by restoring default settings via ITunes.  The Restore Failed with error 1602 and now the IPOD touch is completely dead. It will not power on or respond when I plug it into my PC via USB.  I get an error on my PC stating that device attached to USB port is not recognizable.  Can anyone help?

    Error 1602: Try the following steps to resolve this error:
    Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
    Follow the steps listed for Error 1604.
    This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
    Above from:
    http://support.apple.com/kb/TS3694

  • TS1539 How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

    How do we deal with Error 50 when downloading a movie rental then stopped with error 50 and when I try to resume the downld, it doesn't do it?

    Yeah this "fix" is bunk. The movie is downloading just fine, but the extra features is the one giving me this error code. It is NOT my firewall. If it was, then both files wouldn't download. Plus, I already have the firewall "issue" tacked down and fixed. Have had it fixed for months now. No, this is due to the "new" itunes version 11 software. The only conclusion to fix this issue is UPgrading from 11 back to 10.7 which is what I am going to do. This is completely ridiculous! Come on, Apple, get itunes working once and for all, and fire the people responsible for itunes 11, just like you did to the guy who was responsible for apple maps. Thankfully Google came back to the rescue with google maps app.

  • OOTB workflow gives error when user rejects in the document in publishing a major version.

    Hi All,
    I am using OOTB workflow with little customization  with following configuration
    1. Allow content approval enabled
    2. Configure a workflow with following general settings true
    3. Start workflow on publish of Major version only is enabled
    4. workflow has following configuration enabled.
    Now, when user start publishing of major version and Starts the workflow. workflow starts without any problem.
    But as and when the user rejects the document it is rejected with Reject status with "Approval Status" as well as workflow status which is expected.(This is correct )
    But when i look at the workflow history i can see at last line there is an Error with
    An error has occurred in In [Workflow Name].
    Now when user check out and check in item again and try to publish with Major version again. it gives errors that the previous version is still running.
    I have trace a lot and also test with original OOTB workflow itself. it is behaving the same.
    As per my findings there is problem in "Completion condition of this task process" the end task process is not being executed correctly.
    I tried to end the task process with End the task process action but it is still not working.
    I need some help in this issue as users are facing problems in case of rejection. I hope some one has the solution for the same.
    Two things i have noticed are
    1. My MS office 2010 professional plus is expired as i was using trial version
    2. I have made stop inheriting tasks permission and remove all default groups as i have settings in workflow "Only allow task reception and process owner to read and edit workflow task"
    3. Earlier i had also installed "Sharepoint 2010 April 2012 updates". i had also observed that (installing Sharepoint 2010 April 2012 updates) before that if user has selected "Automatically rejects the document if any participant rejected". it ends
    with "rejected" status. At present it remains in inprogress and not stops with rejected status.
    Can any one give me a hint what should be the problem ? Is it a problem with latest Sharepoint 2010 April 2012 updates ?
    Thanks,
    S. M. MANIYAR

    I have done following testing.
    1. The server in which i have not installed sharepoint 2010 April 2012 updates the above scenario is working fine without any problem
    2. I have also observed following logs of error in server where April 2012 updates is installed.
    8/28/2012 03:51:41.33  w3wp.exe (0x0F08)                        0x0A00 SharePoint Foundation        
     Workflow Infrastructure        88xr Unexpected WinWF Internal Error, terminating workflow Id# 8bf7fef1-c92e-4b22-a16f-480425d3adc6 
    08/28/2012 03:51:41.33  w3wp.exe (0x0F08)                        0x0A00 SharePoint Foundation        
     Workflow Infrastructure        98d4 Unexpected System.InvalidOperationException:
    CompositeActivity cannot transition to 'Closed' status when there are active child context still exist for child activity.     at System.Workflow.ComponentModel.Activity.MarkClosed()     at System.Workflow.ComponentModel.ActivityExecutionContext.CloseActivity()    
    at Microsoft.Office.Workflow.Actions.OfficeTask.FinalClose(Object sender, EventArgs eventArgs)     at System.Workflow.ComponentModel.ActivityExecutorDelegateInfo`1.ActivityExecutorDelegateOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)    
    at System.Workflow.Runtime.Scheduler.Run() 
    Following are last two lines of workflow history.
    S. M. MANIYAR

Maybe you are looking for