Why can't I change the transparent color and font color in IOS 7?

Who thought all this WHITE AND TRANSPARENT color looks appealing?
Why can't I change the color of the folders and text?
I already tried inverting the colors and then it washes out the photos I use as my wallpaper.
I love everything, so far, except this transparent issue.

That's very sad those colors can't be changed. They really look ugly.
Thanks for responding.

Similar Messages

Why can't I change the transparent color in IOS 7?

Who thought all this WHITE AND TRANSPARENT color looks appealing?
Why can't I change the color of the folders and text?
I already tried inverting the colors and then it washes out the photos I use as my wallpaper

That's very sad those colors can't be changed. They really look ugly.
Thanks for responding.

HT201210 Why can't I change the location of my device backups?

Why can't I change the location of my device backups?
iTunes seems to force me to use my c:\ drive as the destination for all backups.
Background: I have set up my c:\ drive only for programs - all data is stored on separate drives - including my iTunes library and all media. So, I can't skinny down the c:\ drive any more without uninstalling programs.
The issue is that my 10,000 rpm, 280 GB - C:\ drive is fast but small and is now FULL after I got about 1/2 way through a 128 GB backup of my ipad. (Yes, all movies have been deleted off of the iPad to minimize the size of the backup.)
I deleted the partial iPad backup, moved all the Mobile Applications to another drive, emptied the recycle bin and tried again with my much smaller iPhone. You guessed it: the io7 update hung and both of my devices are now paper weights.
Which leaves me f*cked, anyone know how I can un-f myself?

SPURCHASE wrote:
The issue is that my 10,000 rpm, 280 GB - C:\ drive is fast but small and is now FULL after I got about 1/2 way through a 128 GB backup of my ipad. (Yes, all movies have been deleted off of the iPad to minimize the size of the backup.)
iTunes movies are not part of an iDevice backup.
Videos & photos you take with the camera (in the Camera roll) are part of the backup but those should be sync'd to the computer and removed from the camera roll.

Why can't I change the transaction isolation level?

I was trying to change the transaction isolation level from an EJB. My source codes are shown as the follows:
======================================================
/*********************** Database Routines *************************/
private void makeConnection() {
try {
InitialContext ic = new InitialContext();
DataSource ds = ( DataSource )ic.lookup( dbName );
con = ds.getConnection();
DatabaseMetaData dmd = con.getMetaData();
show_supported_trans_levels( dmd );
int status = con.getTransactionIsolation();
System.out.print( "1. " );
disp_tx_status( status );
System.out.println( "con.isReadOnly() = " + con.isReadOnly() );
con.setTransactionIsolation( Connection.TRANSACTION_SERIALIZABLE );
System.out.print( "2. " );
disp_tx_status( status );
} catch( SQLException ex ) {
System.err.println( "SQLException: " + ex.toString() );
throw new EJBException("Unable to connect to database. " +
ex.getMessage());
} catch( NamingException ex ) {
System.err.println( "NamingException: " + ex.toString() );
throw new EJBException("Unable to connect to database. " +
ex.getMessage());
private void disp_tx_status( int status )
System.out.print( "Transaction Status: " );
switch( status )
case( Connection.TRANSACTION_READ_UNCOMMITTED ):
System.out.println( "TRANSACTION_READ_UNCOMMITTED" );
break;
case( Connection.TRANSACTION_READ_COMMITTED ):
System.out.println( "TRANSACTION_READ_COMMITTED" );
break;
case( Connection.TRANSACTION_REPEATABLE_READ ):
System.out.println( "TRANSACTION_REPEATABLE_READ" );
break;
case( Connection.TRANSACTION_SERIALIZABLE ):
System.out.println( "TRANSACTION_SERIALIZABLE" );
break;
case( Connection.TRANSACTION_NONE ):
System.out.println( "TRANSACTION_NONE" );
break;
default:
System.out.println( "UNKNOWN" );
break;
private void show_supported_trans_levels( DatabaseMetaData dmd ) throws SQLException
System.out.println( "List of Supported Transaction Isolation Levels: " );
if( dmd.supportsTransactionIsolationLevel( Connection.TRANSACTION_READ_UNCOMMITTED ) )
System.out.println( "TRANSACTION_READ_UNCOMMITTED is supported!" );
else
System.out.println( "TRANSACTION_READ_UNCOMMITTED is unsupported!" );
if( dmd.supportsTransactionIsolationLevel( Connection.TRANSACTION_READ_COMMITTED ) )
System.out.println( "TRANSACTION_READ_COMMITTED is supported!" );
else
System.out.println( "TRANSACTION_READ_COMMITTED is unsupported!" );
if( dmd.supportsTransactionIsolationLevel( Connection.TRANSACTION_REPEATABLE_READ ) )
System.out.println( "TRANSACTION_REPEATABLE_READ is supported!" );
else
System.out.println( "TRANSACTION_REPEATABLE_READ is unsupported!" );
if( dmd.supportsTransactionIsolationLevel( Connection.TRANSACTION_SERIALIZABLE ) )
System.out.println( "TRANSACTION_SERIALIZABLE is supported!" );
else
System.out.println( "TRANSACTION_SERIALIZABLE is unsupported!" );
=========================================================
However, I encountered the following exception when running at the highlighted statement:
======================================================
SQLException: java.sql.SQLException: Transaction manager errors. statement not allowed in XA Session.
======================================================
To my surprise, the isolation level TRANSACTION_SERIALIZABLE is supported from the database vendor. So why can't I change the transaction isolation level?

You can change the setting, you may need to click the lock at the bottom of the preference pane. Be careful what you download and install, Gatekeeper is there to help you. OS X: About Gatekeeper - Apple Support

Why can't i change the setting at the security

Why can't i change the setting at the security & privacy? After I switch to OS X Yosemite, i cant install some application. It says that I can install due unidentified developers. Can anyone help?

You can change the setting, you may need to click the lock at the bottom of the preference pane. Be careful what you download and install, Gatekeeper is there to help you. OS X: About Gatekeeper - Apple Support

Why can't I change the content for some songs when I click the Get Info button?

Why can't I change the content for some songs when I click the Get Info button? The information on the song, artist, genre is grayed out and will not allow me to alter the information.

Hi htechadmin,
Revcevied your PM and noted all details, Many Thanks.
Getting this addressed by the team, either they will reply to you, here, or they shall email Or Call you.
Regards,
LP

WHY can't i change the civility in itunes store always said that there is an error, WHY can't i change the civility in itunes store always said that there is an error

HELP
WHY can't i change the civility in itunes store always said that there is an error, WHY can't i change the civility in itunes store always said that there is an error

try this
http://support.apple.com/kb/HT1452
but also, do you already have your itunes account runnig on other computers? if so how many ?

Why can I not change the apple id associated with iphoto and imovies

Why can I not change the appleid associated with iphoto and imovies

Is it not your Apple ID? Is this a used Mac? If so, the Mac, OS X and the iLife apps are all registered to the original owner of the Mac.
When someone sells a Mac they should erase the Mac and reinstall the most recent version of OS X that came with the Mac. And they should call Apple Care and have the Mac, the OS and the iLife apps disassociated from their Apple ID. Can you call the original owner and request that?

Which option do I have to select If I buy the latest iPad with cellular feature for international use? If I choose verizon can I just change the sim card and insert one from another country?

Which option do I have to select If I buy the latest iPad with cellular feature for international use? If I choose verizon can I just change the sim card and insert one from another country?

I would guess you need the A1460 model
see here
http://www.apple.com/ipad/LTE/

Can I change the Screen colour and font size?

Can I change the screen colour and font size?

Yes. Use an iPhone browser, such as iExplorer, to access your iPhone's file system. The screensaver photos are stored here;
/System/Library/PrivateFrameworks/AppleTV.framework/DefaultAnimalPhotos
/System/Library/PrivateFrameworks/AppleTV.framework/DefaultFlowerPhotos
Once you locate these files, you can replace the photos with your own or add more to the folders. Do not change the name of the the folder.

IMovie-Why can't I change the font of my title?

My simple question is that when I open the Font window from the menu to try to change the type, size and color of my font it doesn't change anything.
Below is the step by step of what I'm doing if you need this information:
I choose "T" button below view screen.
Select "Organic Main" and drag and drop it infront of my video (Green line indicates where to put it, and a green plus confirms the move is good).
Screen pops up asking me to choose background, I choose "Organic".
View screen shows new background with Text "Title Text Here" highlighted.
Project screen shows the new block in the front of my video clips, on top of this box is the blue rectangle box that is highlighted yellow and repeats the "Title Text Here" text.
So far so good.
I go to the top menu and choose "Text > Show Fonts". The Font window pops up.
Now when I click on fonts, font sizes, or try to change the color of the font, nothing happens.
I close the font window and hit done on my preview window and still nothing happens.
What am I doing wrong?
Thank you so much in advance, you people are always so helpful
Michele Ireys

Hi Appleman,
So what causes the Title Sequence from not being able to be edited?
As per michelepost comments earlier, neither the "Show Fonts" function allows title values to be changed, nor if the iMove Font Panel displayed?
From the Menu options, neither does the Cmd- or Cmd+ functions work to manage the size of the title text...
Can new titles be created with images from my photo library be used as backgrounds for Titles?
Whilst on the theme, why when changing photo image durations, the value in time entered does not relate to the image(s) selected? I enter 1.8seconds, and 0.9 is displayed against the selected image.......
Looking forward to your response in advance.
Maggie

Why can't I change the names of my states in my symbol?

For some reason, Fireworks won't let me change the names of my states in my symbol.
I double click on the state name in the states panel, and nothing happens.
It works fine for normal "non-symbol" pages.
Can you normally change the names of states in symbols?
Any ideas why I am having difficulty doing so?

Thank you SO much! Funny thing, I didn't even notice the tiny folder icon at the top of the info window until I saw it in the screen shot at the beginning of that article.
See, I have begun changing the icons of the folders of digital scrapbooking alphabets I have (screenshot below). Now it will be so much easier to scroll through my hundreds of alphas and choose one, because I can SEE them without going in and out of each folder.
A million thank yous!!!!!

Why can't I change the genre on the new iTunes

I wish to change the genre of a song on the new iTunes. I right click on the song go to details, write in the genre and then click on OK and yet nothing changes. So how can I effectively change the genre of a song?

I found out that in order to have iTunes accept changes, I must first go into Windows Explorer to the music file under properties, in the General tab, then uncheck in Attributes the read only box. Then iTunes accepts the changes.
Thank you and have a great day!

Why can't I change the background color of my UIView in IB?

I have a rootController which controls several other ***ViewController's and I have been doing the usual thing by changing the background color in IB. However, for one controller, I cannot change it's background color from the default no matter what I do.
To be clear, each new controller created has been done in the same manner using the UIViewController subclass with nib file.
I have cleaned the project and deleted the app from my iPhone countless times and still no change.
Any suggestions will be greatly appreciated.
Thanks!

@ KT
I'm replying to myself because I cannot see your post ??????
From my email- KT said:
"Typically, when a same-only different controller acts up like this, the first thing to do is to rewire - sounds like you've gone down that path tho.
Can you duplicate one of the cooperative controllers, add it to the mix and see if things change there?"
I've tried all of that several times. I have no idea. Maybe some sleep will help it and me.
Thanks for your comments and suggestions.
Edit
As soon as I posted this - your post appeared. Again??????

Why can't I change the color of my ProgressBar? Always green.

I added a ProgressBar object to my form. Works fine. But the bar is always green despite setting the Forecolor to Blue in the Design and to red in code:
' intTotalNumberOfFiles = 80
pgbCloset.Value = 0
pgbCloset.Step = 1
pgbCloset.Maximum = 99
pgbCloset.ForeColor = Color.Red ' for testing.
For intCnt = 1 To intTotalNumberOfFiles
'If intTotalNumberOfFiles > 0 Then pgbCloset.ForeColor = Color.Green
'If intTotalNumberOfFiles > 30 Then pgbCloset.ForeColor = Color.Yellow
'If intTotalNumberOfFiles > 60 Then pgbCloset.ForeColor = Color.Red
pgbCloset.PerformStep()
Next
Any idea why? How do I fix this? Thx.

... ups, VB,so here's something to start with... (or uncheck the "enable XP visual styles" checkBox in your project's settings)
Partial Public Class Form1
Inherits Form
Private WithEvents progressBar1 As New NewProgressBar()
Private WithEvents button1 As New System.Windows.Forms.Button()
Private WithEvents timer1 As New System.Windows.Forms.Timer()
Private WithEvents button2 As New System.Windows.Forms.Button()
Private WithEvents trackBar1 As New TrackBar()
Private WithEvents trackBar2 As New TrackBar()
Public Sub New()
InitializeComponent()
Me.button1.Location = New System.Drawing.Point(20, 105)
Me.button1.Name = "button1"
Me.button1.Size = New System.Drawing.Size(75, 23)
Me.button1.TabIndex = 1
Me.button1.Text = "button1"
Me.button1.UseVisualStyleBackColor = True
Me.timer1.Interval = 50
Me.progressBar1.Location = New System.Drawing.Point(41, 1)
Me.progressBar1.Name = "progressBar1"
Me.progressBar1.Size = New System.Drawing.Size(187, 23)
Me.progressBar1.TabIndex = 0
Me.progressBar1.ShowText = True
Me.progressBar1.ForeColor = Color.White
'Colors and Positions
Me.progressBar1.Color1 = Color.Red
Me.progressBar1.Color2 = Color.Yellow
Me.progressBar1.Color3 = Color.Green
'PositionColor2 must be in a range from 0 to 1.0F
Me.progressBar1.PositionColor2 = 0.71F
Me.progressBar1.GammaCorrected = True
'change OverlaySpeed and Delay and Width
Me.progressBar1.OverlayAddAmount = 0.8F
Me.progressBar1.OverlayReshowDelay = 35.0F
Me.progressBar1.OverlayWidth = 50.0F
Me.button2.Location = New System.Drawing.Point(120, 105)
Me.button2.Name = "button2"
Me.button2.Size = New System.Drawing.Size(75, 23)
Me.button2.TabIndex = 2
Me.button2.Text = "button2"
Me.button2.UseVisualStyleBackColor = True
Me.trackBar1.Location = New Point(20, 145)
Me.trackBar1.Width = Me.progressBar1.Width
Me.trackBar1.Minimum = 0
Me.trackBar1.Maximum = 100
Me.trackBar1.Value = 10
Me.trackBar2.Location = New Point(20, 195)
Me.trackBar2.Width = Me.progressBar1.Width
Me.trackBar2.Minimum = 0
Me.trackBar2.Maximum = 100
Me.trackBar2.Value = 30
Me.Controls.Add(Me.button2)
Me.Controls.Add(Me.button1)
Me.Controls.Add(Me.progressBar1)
Me.Controls.Add(Me.trackBar1)
Me.Controls.Add(Me.trackBar2)
Me.progressBar1.Left = 0
Me.progressBar1.Width = Me.ClientSize.Width
End Sub
Private Sub trackBar2_ValueChanged(sender As Object, e As EventArgs) Handles trackBar2.ValueChanged
Me.progressBar1.OverlayReshowDelay = CSng(Me.trackBar2.Value)
End Sub
Private Sub trackBar1_ValueChanged(sender As Object, e As EventArgs) Handles trackBar1.ValueChanged
Me.progressBar1.OverlayAddAmount = CSng(Me.trackBar1.Value) / 10.0F
End Sub
Private Sub button1_Click(sender As Object, e As EventArgs) Handles button1.Click
Me.timer1.Enabled = True
End Sub
Private Sub timer1_Tick(sender As Object, e As EventArgs) Handles timer1.Tick
Me.timer1.Stop()
Me.progressBar1.Value += 0.5F
If Me.progressBar1.Value = Me.progressBar1.Maximum Then
Me.progressBar1.Value = 0
End If
Me.timer1.Start()
End Sub
Private Sub button2_Click(sender As Object, e As EventArgs) Handles button2.Click
Me.timer1.Enabled = False
End Sub
End Class
Public Class NewProgressBar
Inherits ProgressBar
Public Property Percentage() As Single
Get
Return m_Percentage
End Get
Set(value As Single)
m_Percentage = Value
End Set
End Property
Private m_Percentage As Single
Public Property ShowText() As Boolean
Get
Return m_ShowText
End Get
Set(value As Boolean)
m_ShowText = Value
End Set
End Property
Private m_ShowText As Boolean
Private _doMarqueeOverlay As Boolean = False
Private WithEvents timer1 As New Timer()
Private _pos As Single = 0
Private _rWidth As Single = 71
Public Property OverlayWidth() As Single
Get
Return _rWidth
End Get
Set(value As Single)
_rWidth = value
End Set
End Property
Private _c As Integer = 0
Private _posAdd As Single = 1.5F
Public Property OverlayAddAmount() As Single
Get
Return _posAdd
End Get
Set(value As Single)
_posAdd = value
End Set
End Property
Private _posDelay As Single = 50
Public Property OverlayReshowDelay() As Single
Get
Return _posDelay
End Get
Set(value As Single)
_posDelay = value
End Set
End Property
Public Property Color1() As Color
Get
Return m_Color1
End Get
Set(value As Color)
m_Color1 = Value
End Set
End Property
Private m_Color1 As Color
Public Property Color2() As Color
Get
Return m_Color2
End Get
Set(value As Color)
m_Color2 = Value
End Set
End Property
Private m_Color2 As Color
Public Property Color3() As Color
Get
Return m_Color3
End Get
Set(value As Color)
m_Color3 = Value
End Set
End Property
Private m_Color3 As Color
Public Property PositionColor2() As Single
Get
Return m_PositionColor2
End Get
Set(value As Single)
m_PositionColor2 = Value
End Set
End Property
Private m_PositionColor2 As Single
Public Shadows Property Value() As Single
Get
Return Me.Percentage
End Get
Set(value As Single)
Me.Percentage = value
'maybe dont invalidata always...
If Not _doMarqueeOverlay Then
Me.Invalidate()
End If
End Set
End Property
Private m_useImg As Boolean
Public Property UseImg() As Boolean
Get
Return m_useImg
End Get
Set(value As Boolean)
m_useImg = value
End Set
End Property
Private m_image As Bitmap
Public Property Image() As Bitmap
Get
Return m_image
End Get
Set(value As Bitmap)
m_image = value
End Set
End Property
Public Sub New()
Me.SetStyle(ControlStyles.UserPaint, True)
Me.DoubleBuffered = True
Color1 = Color.Lime
Color2 = Color.Green
Color3 = Color.Red
PositionColor2 = 0.55F
End Sub
Public Property GammaCorrected As Boolean
Protected Overrides Sub OnPaint(e As PaintEventArgs)
Dim rec As Rectangle = e.ClipRectangle
rec.Width = CInt(rec.Width * (CDbl(Value) / Maximum)) - 4
If ProgressBarRenderer.IsSupported Then
ProgressBarRenderer.DrawHorizontalBar(e.Graphics, e.ClipRectangle)
Else
e.Graphics.DrawRectangle(Pens.Gray, 0, 0, Me.Width, Me.Height)
End If
rec.Height = rec.Height - 4
If m_useImg AndAlso Not Image Is Nothing Then
Using t As New TextureBrush(Image)
e.Graphics.FillRectangle(t, 2, 2, rec.Width, rec.Height)
End Using
Else
Using l As New System.Drawing.Drawing2D.LinearGradientBrush(e.ClipRectangle, Color.Green, Color.Red, 0.0F)
Dim lb As New System.Drawing.Drawing2D.ColorBlend()
lb.Colors = New Color() {Color1, Color2, Color3}
lb.Positions = New Single() {0, PositionColor2, 1.0F}
l.InterpolationColors = lb
l.GammaCorrection = Me.GammaCorrected
e.Graphics.FillRectangle(l, 2, 2, rec.Width, rec.Height)
End Using
End If
Using l2 As New System.Drawing.Drawing2D.LinearGradientBrush(e.ClipRectangle, Color.FromArgb(147, 255, 255, 255), Color.FromArgb(0, 255, 255, 255), System.Drawing.Drawing2D.LinearGradientMode.Vertical)
Dim lb As New System.Drawing.Drawing2D.ColorBlend()
lb.Colors = New Color() {Color.FromArgb(40, 255, 255, 255), Color.FromArgb(147, 255, 255, 255), Color.FromArgb(40, 255, 255, 255), Color.FromArgb(0, 255, 255, 255)}
lb.Positions = New Single() {0, 0.12F, 0.39F, 1.0F}
l2.InterpolationColors = lb
l2.WrapMode = System.Drawing.Drawing2D.WrapMode.Tile
e.Graphics.FillRectangle(l2, 2, 2, rec.Width, rec.Height)
End Using
If Me.ShowText Then
Using sb As New SolidBrush(Me.ForeColor)
Dim sz As SizeF = e.Graphics.MeasureString(Percentage.ToString("N0") + " %", Me.Font)
e.Graphics.DrawString(Percentage.ToString("N0") + " %", Me.Font, sb, New PointF((Me.Width - sz.Width) / 2.0F, (Me.Height - sz.Height) / 2.0F))
End Using
End If
If Value > 0 AndAlso _doMarqueeOverlay = False Then
StartMarquee()
End If
If Value = Maximum - 1 Then
StopMarquee()
End If
If _doMarqueeOverlay Then
Dim rWidth As Single = _rWidth
If rec.Width < rWidth Then
rWidth = rec.Width
End If
If rWidth + _pos > rec.Width Then
rWidth = rec.Width - _pos
End If
Using l As New System.Drawing.Drawing2D.LinearGradientBrush(New RectangleF(_pos + 2, 2, _rWidth, rec.Height), Color.FromArgb(127, 255, 255, 255), Color.FromArgb(0, 255, 255, 255), System.Drawing.Drawing2D.LinearGradientMode.Horizontal)
Dim lb As New System.Drawing.Drawing2D.Blend()
lb.Factors = New Single() {1, 0, 1}
lb.Positions = New Single() {0, 0.5F, 1.0F}
l.Blend = lb
'l.TranslateTransform(_pos - rWidth, 0);
l.WrapMode = System.Drawing.Drawing2D.WrapMode.TileFlipXY
e.Graphics.FillRectangle(l, _pos + 2, 2, rWidth, rec.Height)
_pos += _posAdd
If _pos >= rec.Width Then
If _c < _posDelay Then
_pos -= _posAdd
_c += 1
Else
_pos = -_rWidth - _posDelay
_c = 0
End If
End If
End Using
End If
End Sub
Private Sub StopMarquee()
timer1.Stop()
_doMarqueeOverlay = False
End Sub
Private Sub StartMarquee()
_doMarqueeOverlay = True
timer1.Interval = 10
timer1.Start()
End Sub
Private Sub timer1_Tick(sender As Object, e As EventArgs) Handles timer1.Tick
timer1.Stop()
Invalidate()
timer1.Start()
End Sub
Protected Overrides Sub Dispose(disposing As Boolean)
If timer1.Enabled Then
timer1.Stop()
End If
timer1.Dispose()
If Not Image Is Nothing Then
Image.Dispose()
End If
MyBase.Dispose(disposing)
End Sub
End Class
Regards,
Thorsten

Why can't I change the transparent color and font color in IOS 7?

Similar Messages

Maybe you are looking for