WRVS4400N - Logging and Email Alerts when I use a VPN client - Firmware bug?

Hi folks -
I've got a problem with my WRVS4400N that has been dogging me for a long time now, and I'm finally fed up with the email alerts.
My wife has a VPN client for her work, on her laptop. It is nothing fancy, normal IPSec VPN, details on it I can get if needed, but it's just VPN.
My WRVS4400N is running 1.1.03 firmware, latest on the site. I have all VPN pass-throughs enabled. VPN connectivity for the wife works great, no problems that I'm aware of for her functionally.
The problem is, that I have logging turned on with email alerts. When my wife uses her VPN connection, I get flooded with alerts from the router with all sorts of goobly goo information. It's almost like there is a bug in the router firmware that is parsing information incorrectly.
Log levels are set to 0,1,2,3. Email alerts enabled. DoS threshold is 50, Log Queue is 100, Log Time is 60. SMTP information for my mail server populated of course, and Local Log enabled.
Below is a sample of the email body that gets sent. My wife has been using her VPN connection for about 3 hours tonight, and already I've been flooded with over 1000 emails.
Here's some body content:
Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN05 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN07 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENv8 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENW9 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN20 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN43 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENb CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN=CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=w GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136 Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136
Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 7
Does anyone have any ideas? This seems like a code bug to me, but how do I go about reporting to Linksys?
Of course, I can turn off email alerts, but then that defeats the purpose of the router being able to tell me when something is awry.
Any help would be appreciated!
Thanks,
Jesse T.

hay,
Nobody can test this?
nobody has a 5520?

Similar Messages

How do i recieve email alerts when using find my iphone

how can i recieve email alerts when find my iphone is used

You don't, this is a new security measure.
you can send apple a feed back here http://www.apple.com/feedback/

Email alert when calc scripts are done

Hi - I have Essbase 6.5 and wanted to know how do I setup an email alert when one of my calcs are done running?
Thanks

Hi CLAU,
we use second method suggested by Glenn.
instead of BLAT we use SendMail
here is the sample batch file which call a maxl script (which can be your calc script) and then emails the log.
hope this helps.
-Dornakal
www.dornakal.blogspot.com
Batch File to call the MaxL Script and send email about status of the
Rem ******************************************************************************
Rem Object Type: Batch File
Rem Object Name: BatchFileName.bat
Rem Script Date: 01-27-2009
Rem Created by: Dornakal
Rem Purpose: This script loads the following data into Cube
Rem Changed By:
Rem Change Date:
Rem Description:
Rem ******************************************************************************
Rem This starts the log file
echo "Start of log" > E:\Logs\Dataload.log
Rem This calls MaxL script to load data
essmsh E:\Scripts\MaxL \DataLoad.mxl >> E:\Logs\Dataload.log
Rem Send mail about the status of the job
sendmail -b E:\Logs\Dataload.log -s "Subject of the mail (data load status)." -f Sendersemail -r Recievers email -r Receiver’s email -X HQSMTP.yourcompany.net

No email alerts when post are replied to

I don't get an email alert when I get a reply to a post. Please can anyone tell me why and how to change this.

Other uses have reported the same problem. This occasionally happens and there is nothing you can do. It has been reported to Apple.

Prime Infrastructure 2.0 - Email alert when device is unreachable

Is there a way for PI to send email alerts when a device becomes unreachable? I know there are alerts when an interface goes down, but I can't find how to get prime to alert me ONLY when a device becomes unreachable.
Does anyone know how to do this? I can't believe such a simple feature would be so difficult to configure...

PI also generates an event when it finds unreachable device. An event is an occurrence or detection of some condition in or around the network. An event is a distinct incident that occurs at a specific point in time. Examples of events include:
Port status change
Device reset
Device becomes unreachable by the management station
You can view the list of events using the Event Browser.
Choose Operate > Alarms & Events , then click Events to access the Events Browser page.
Prime Infrastructure discovers events by automatically polling devices and discovering changes; for example, device unreachable.
For more details on Events, please check here :
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/user/guide/prime_infra_ug/alarms.html#pgfId-1054357
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

I changed my Apple ID and password. When I use the Apple ID it still show up at old Apple ID. I can't login or purchase anything

I changed my Apple ID and password. When I use the Apple ID it still show up at old Apple ID. I can't login or purchase anything??? What can I do??

Hi,
I had this problem too. Log out on everything you can be logged on with your apple id. After that log in with your new email and password. Hope it helps!

Log and capture problems for HDV using FCP 5.0.1

I cant seem to get a picture in my log and capture browser when using HDV. The screen says my camera is connected, I see timecode correctly rolling in sync with my cameras timecode, I can use the controls, but no picture on the screen?
When I hit capture now, the capture screen pops up and gives a message "waiting for data from device".
we shot at 720p at 25fps, there is no capture preset for this in my version of FCP. Could this be the problem? Please help!!

Thanks for responding.
It's a mac osx 10.4.11 and a 2 ghz intel core duo. I'm using easy set up in final cut pro, but there is no option for hd fire wire basic (which apple support told me to look for). The only hd options are 1080i50, i60 and 720 p30. The other hd options are for the apple intermediate codec. When I use the easy set up for hd 1080i60, then go to log and capture, it doesn't give me the preview window to set in's out, batch capture etc. It only lets me capture straight from the camera and I have to manually stop it and start it which is a major pain. Plus the clips need to be rendered once I put them in a timeline. I've shot and edited on mini dv with final cut for nearly 7 years, but now that i've tried to upgrade and shoot hd mini dv, all of these problems have arrived in capturing. I'm starting to think my version of final cut pro (5.0.1) just doesn't work with hd, unless it's very time consuming. Any ideas?

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords but it does not work for the macbook.

I have an apple ID which I use to sign into icloud for my iPad and iPhone.But when I use the same ID for setting up iCloud on my Macbook it says INCORRECT ID or password, try again. I tried changing my passwords several times but it does not work for the macbook.

You will have to provide the correct password to delete the existing account, if you have tried but are not getting the password reset email, contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password.

Why i dont get email notifications when someone uses my apple account to know my location through Find my Iphone?

Why i dont get email notifications when someone uses my apple account to know my location through Find my Iphone?

Try adding [email protected] as a VIP contact in your icloud mail app using the appleid used for icloud if using multiple accounts (i.e different itunes and icloud account).
But seriously that happens really !? not getting emails for using icloud services with a valid appleid.

How to set alert threshold and email alerts?

Hi!
I have configured Solution manager 3.2 to monitor
our R/3 systems.
I want to be able to set the threshold for tablespace
usage and be able to send an email if the usage
of the tablespace is 80% full.
Could anybody tell how to implement it?
Thanks!

Hi Christy:
There are different approaches to configure alerts, if you are using Solution Manager; I think you can benefit if you choose SolMan and the Central System (CEN) to handle all the monitoring and email alerting.
If this is the case, you will need to install the CCMS Agents on every satellite system in order to trigger remote alerts.
Let me know what is your idea and I can follow with you with the required steps.
Best Regards,
Federico G. Babelis
NetWeaver Certified Consultant
GAZUM Technologies S.A.
Consulting Services and Software Solutions
http://www.gazum.com
...download FREE Marketplace Manager at: http://www.gazum.com/products

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

For each mail account, along with designating a primary SMTP server, you should be able to just turn off any and all other SMTP servers you have listed. In that case, if there is a problem with comcast, the message send should just fail.
Also make sure your comcast smtp settings are correct (port, likely 587 but might be something else for comcast, whether you should be suing SSL or not, do you need authentication or not).
You might find the comcast forums useful for getting the settings right - I found this:
http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/iphone-email/m-p/66 1151?view=by_date_ascending#M131151
The second poster notes, SSL should be on, authentication should be "password" and you should be using port 995

Why does my photoshop keep giving black and white lines when I use my lasso tool?

why does my photoshop keep giving black and white lines when I use my lasso tool? It has never done this before last night. It filles the Whole lasso seleted box with (what it almost looks like) black and white caution lines. then when I go to zoom out, my zoom option starts to mess up where you cant click and move your mouse to zoom in/out with ease but where you have to click to zoom out (many times).
Can ANYONE help me?

I am using CS5, WIndows 7, I am not sure how to tell if my drivers are up to, and I am more than happy to screen shot it.

My computer has crushed so i have to download I tunes again,and maybe all my information will be lost.but i had I cloud and last time when i used to i tunes they have asked me to do I cloud so i did,so now when i will again setup my computer and I tunes

my computer has crushed so i have to download I tunes again,and maybe all my information will be lost.but i had I cloud and last time when i used to i tunes they have asked me to do I cloud so i did,so now when i will again setup my computer and I tunes will i get all my Contacts and Inofrmations cause i had i have an account on I cloud

If you used icloud for your contacts and calendar then you should have no problem. They will all come back on the phone once you put the icloud user name and password in. Itunes does not store the contact information except in a backup file and if you were backing up using icloud you can use that backup to restore with.

I have a macbook retina with a partition of windows 7 and Yosemite. When I use time machine in Yosemite it wont recognise the macintosh HD, but it recognises the windows hd ( bootcamp). Does anybody know why ?

I have a macbook retina with a partition of windows 7 and Yosemite. When I use time machine in Yosemite it wont recognise the macintosh HD, but it recognises the windows hd (bootcamp ). Does anybody know why ?

Please provide a bit more detail on what 'recognize' means. A screen shot is always very helpful.

HT1329 I am trying to move music from my ipod onto my mac. When I locate the ipod under devices on my mac there is no music ! even though I can see it and play it when I use the ipod. So how can I transfer it ?

I am trying to move music from my ipod onto my mac. When I locate the ipod under devices on my mac there is no music ! even though I can see it and play it when I use the ipod. So how can I transfer it ?

brianmartinwoolf wrote:
I am trying to move music from my ipod onto my mac. ...
Was this Music purchased in iTunes... If so... see here...
Transfer Purchases
File > Devices > Transfer Purchases
More Info Here > http://support.apple.com/kb/HT1848

WRVS4400N - Logging and Email Alerts when I use a VPN client - Firmware bug?

Similar Messages

Maybe you are looking for