XI/PI 7.0 Installation on Windows Machine (Virtualized Environment)

Hi All
We are planning to install XI/PI 7.0 on virtualized environment (Windows as OS) for Development and Test Environment
Does anyone has experince installing this on Windows environment (virtualized environment) and also prons and cons, in installing it on Windows
Please let me know your feedback as we have to finalise the OS for XI/PI 7.0 Installation
Thanks in Advance
Thanks with regards
Deelip

hai check the below links
https://www.sdn.sap.com/irj/sdn/articles-lastyear?startindex=121
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a04e59be-f51f-2a10-829b-dd3e5a359aa4
note:award points if found helpfull
regards
chandrakanth.k

Similar Messages

Starting EPMA in a Windows 2008 Virtual Environment - Error Encountered

We have installed EPMA 11.1.2.1 in a Dev environment (VM) running Windows 2008 Server. We have successfully started all services manually, with the exception of EPMA Server. When we attempt to start the EPMA Server, we encounter an error message, "The Hyperion EPMA Server located on Local Computer started and then stopped. Some services stop automatically if they are not in use by other programs or services." We are starting the services in an order recommended by Oracle, but it seems one service either needs to be started ahead of EPMA Server or another service is not fully starting in time.
Thoughts and suggestions welcome.

What backend are you using? if MS-SQL it is most likely because you need to set READ_COMMITTED_SNAPSHOT and ALLOW_SNAPSHOT_ISOLATION to ON.
Pablo

Issue with OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine

Hi
I'm following the below steps to install OBIEE 11.1.1.5.0 Installation on Windows 2008 64-bit machine. However the installation is unsuccessful as it fails at the "Domain Creation" step. It would be very helpful and greatly appreciated if any workaround is provided. Thanks!
1.JRockit Windows 64 bit Version jrockit-jdk1.6.0_24-R28.1.3-4.0.1-windows-x64
2. Oracle 11G Database
3. RCU Installation
4. WebLogic 10.3.5.0 Generic Version
5. Weblogic patch
6. OBIEE 11G 64 bit version (11.1.1.5). Software only
7. Execute Configure.bat in :\Middleware\Oracle_BI1\bin
Thanks

Hi,
Kindly refer my blog link:
http://obieeelegant.blogspot.com/2011/10/windows-7-home-premium-edition-is-not.html
from exp..with obiee11g installation with win 7 64bit i have face so many issues..
http://obieeelegant.blogspot.com/2011/09/obiee-11g-111150-software-only.html
obiee11.1.1.5.0(Software Only Install) windows 7 64bit Installation Error
OBIEE11g software only install configuration get hangover on win 2008 64
==========
Note: some time it works with simple install option then rebooting mechine/restarting mechine it's not working.then i had OWC and discussed with MY Oracle Support team...they confirmed it's not support. please refer the certification matrix excel file in my blog link
Hope it's clear...
Thanks
Deva
Edited by: Devarasu on Nov 25, 2011 11:18 AM

Installables for 32 bit windows machines

Hello,
It seems SAP has stopped providing installables for 32 bit windows machines. IS it correct?
If yes which SAP versions can be installed on - Windows server 2003 SP2 (32 bit).
Can we have ECC6 EHP4 based on SQL database on it?
Thanks,
Ambarish

Hi,
If you read the installation guide then following thing is mentioned there:
As of SAP ERP 6.0 SR3, you must install an SAP ERP system only on 64-bit operating
systems.
For the dialog instance, you can still use a 32-bit operating system. Therefore, you
only see the folder Software Life-Cycle Options on the Welcome screen when you start the
installation from a 32-bit installation master DVD.
You might need to install dialog instances on 32-bit operating systems if you want to
use 32-bit SAP NetWeaver components, such as Adobe document services. However,
first check whether such 32-bit components can run on 64-bit operating systems. If
so, we recommend running these 32-bit components on a 64-bit operating system.
Thanks
Sunny

Error in Deploying java components - SAP NW CE 7.2 installation on Windows

Hi,
I am installing NW CE 7.2 on a windows machine. I opted for custom installation. I get the below error at "Deploy java components step. Any clue on why is this happening and how to resolve ?
<html> <head> </head> <body> An error occurred while processing option SAP NetWeaver 7.2 Developer Edition > Install > Custom Server Installation( Last error reported by the step :Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW72\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jce.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jsse.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_smime.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_ssl.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/w3c_http.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner deploy -l "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/deploy.lst" -e stop -u lower -w safety --lcm bulk -t 14400000 --host L-156007555 --port 50004' aborts with return code 104. Error message is 'undefinedStatus:AlreadyDeployedDescription: 1. Already deployed component has version:1000.7.20.1.0.20091117001100. SOLUTION: Check 'undefined' and '' for more information.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM. </body></html>
Regards,
Rukmani

The below msg is from sapinst_dev.log
<html> <head> </head> <body> An error occurred while processing option SAP NetWeaver 7.2 Developer Edition > Install > Custom Server Installation( Last error reported by the step :Execution of Deploy Controller Runner tool '"C:\Program Files\sapinst_instdir\NW72\INSTALL\DEVSYSTEM\sapjvm\sapjvm_6\bin\java.exe" -classpath "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jce.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_jsse.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_smime.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/iaik_ssl.jar;E:/usr/sap/TR6/SYS/global/security/lib/tools/w3c_http.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcexceptionimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar;E:/usr/sap/TR6/J00/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar;C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/install/lib/tcje~cl_deploy.jar" -Xmx256m -Ddc.api.verbose=false com.sap.engine.services.dc.api.cmd.Runner deploy -l "C:/Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM/deploy.lst" -e stop -u lower -w safety --lcm bulk -t 14400000 --host L-156007555 --port 50004' aborts with return code 104. Error message is 'undefinedStatus:AlreadyDeployedDescription: 1. Already deployed component has version:1000.7.20.1.0.20091117001100. SOLUTION: Check 'undefined' and '' for more information.). You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/NW72/INSTALL/DEVSYSTEM. </body></html>

Is it possible to find the creation date of a CD/DVD burned on Mac OS 8.6 either on newer mac or Windows machine?

I am cataloguing lot of my old music and data cds/dvds. Some of these were created on my old Mac (OS 8.6). I was wondering if there was a way to check the metadata on these discs on my current Windows machine or on a Mac that I have at work to get this information. When I pop the CD and DVDs into the windows machine the dates that show up in the explorer window are actually older than the burn. I assume this is the CD creation date and not the burn date. It's not a huge deal, but it would help me delve deeper into nerd-dom!

One approach would be to have access to a Mac that can run the classic environment or has a pre OS X native installation. These should be able to read the files for dates of creation/modification. There is also SheepShaver that runs on OS X machines.
https://www.macupdate.com/app/mac/20615/sheepshaver
http://en.wikipedia.org/wiki/Classic_Environment
http://www.everymac.com/systems/by_capability/macs-that-support-macos-9-classic. html
https://discussions.apple.com/message/22597899#22597899

Oracle 11g client installation on Windows 7 Home Premium (64-bit)

I'm having trouble installing the Oracle 11g client installation on Windows 7 Home Premium (64-bit) machine.
Can Oracle 11g client even be installed on the Windows 7 Home Premium 64?
Thanks!

Hi;
As mention here home OS not supported, so as mention here again if you make some googling you can find link&blog which is mention to create WM machine, install linux(you can use OEL linux which is free and can be download from e-delivery site) than you can make 11g installation on it
Regard
Helios

Failed to Install The New Preview Build. Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.

Hello,
I'm having issues upgrading my Windows 10 Technical Preview installation build 9879 to a newer build that's become available late January 23rd.
I am installing the new upgrade in a Hyper-V virtual machine and get the following error:
Failed to install the new preview build, please try again later. 0x80246007
What could be the problem?
Previously I've had messages that Windows cannot be upgraded on a computer with less than 2 Gbyte of RAM. That's a Hyper-V VM with dynamic memory and I was highly surprised to see this error; never had this before. Had to set 2048 Mbytes as a minimum memory
for this VM. Now that I have this 80246007 error code.
When looking up System log, the following error messages are listed multiple times:
Installation Failure: Windows failed to install the following update with error 0x80246007: FBL_AWESOME1501 9926 Professional.
The errors are returned for the Event ID 20 by WindowsUpdateClient
in task category Windows Update Agent..
I reviewed the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability
registry key as suggested in Windows
Insider stuck on build 9841 - "No new preview build was found", and here is what it shows:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsSelfHost\Applicability]
"BranchName"="fbl_awesome1501"
"ThresholdRiskLevel"="low"
"ThresholdOptedin"=dword:00000001
Note, when attempting to install the downloaded update from a native boot, installation starts with no errors.
However, since setup is not supported for a natively booted VHD files, it does not proceed further showing a message that installation on virtual drives is not supported.
Looks like Setup is having problems installing in a Hyper-V virtual machine.
Possibly, some ESD files got corrupted during downloading? Is it possible to remove them and re-download missing files? (I, however, noticed that Windows seems to re-download upgrade files after you restart 9879 and attempt to check for a new build.
Any clue why installing under VM causes 9926 to fail?
Thank you in advance.
Well this is the world we live in And these are the hands we're given...

Hi,
According to the error message, this problem seems like update package installation failed during system upgrade.
You can try to remove ESD file which locate at boot of C drive and upgrade the system again for test.
On the other hand, make sure the system 9879 installed all Windows pushed updates before system upgrade.
Roger Lu
TechNet Community Support

Something happened and your installation of Windows 8.1 couldn't be completed

I have a brand new Acer with Win 8 installed. I've removed McAfee. Other than that the machine is as delivered.
Trying to download 8.1 and install it from the store. It sits there for a couple of minutes then says:
Your Windows 8.1 installation couldn't be completed
Something happened and the installation of Windows 8.1 can't be completed.
Now apart from this being really annoying could anyone have come up with a less useful message?
I have tried it several times. I've run the compatibility util and it passes. I've tried the store without logging in, then tried the store with logging in.
I've tried it in Firefox, tried it in IE.
Same result every time.

OK, so I posted 2 days ago about this issue, and I resolved it yesterday. I essentially performed a "refresh" under Windows 8, which removed a lot of the updates and applications that could be potential issues.
I then had to go to the Sony website to re-install the latest drivers, SW and driver patches related to my Vaio Duo (I had already updated the firmware and Bios -- necessary to install Windows 8.1--). I then had to re-install all Windows 8 updates,
and magically, the Windows 8.1 update started to download when I clicked on it in the Windows Marketplace. I do not know what was the source of the problem, but the refresh definitely got rid of it. It is a long process however as a lot has to
be reinstalled to bring the refreshed system to its full functionality with the latest manufacturer and Microsoft updates for Windows 8.
I can't see how a non-technical user could perform all these steps to upgrade a recent tablet to Windows 8.1!
Good luck!
Olivier

How to block software installation in Windows 7?

How to block Software installation in Windows 7 by using Windows Firewall ?
How to block Software installation in Windows 7 by using Group Policy ?

Windows Firewall won't block installations. You can use group policy, check out Using Software Restriction Policies to Protect Against Unauthorized Software
As well, as a security best practice users who should not be allowed to install applications should not be members of the Power Users or Administrators local machine groups. As members only of the Users local machine group they do not have permission to
install applications.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

Peoplesoft installation on windows 7 (64bit)

Hi Gurus,
I want to do peoplsoft server installation on windows 7 (64 bit)..
First i need to FSCM (financials and supply chain management) , please provide me the part numbers for the same so that i can download from edelivery or raise a SR ...
My ideais if i have a 8.52 peopletools then i can install HCM (Human resources and campus solutions too)
I need compatible people tools and applications softwares , so that i don't need to do people tools upgrade or application upgrade
Thanks,
uday
Edited by: udayjampani on Feb 21, 2012 1:36 PM

First of all have a look into this doc if you are a beginner. It would give a an overview of all the peoplesoft components and the order in which they are installed. After you have read it thoroughly, you would find yourself standing somewhere towards the peoplesoft installation.
http://docs.oracle.com/cd/E26530_01/psft/acrobat/PeopleTools_8.52_GettingStartedPeopleSoftInstallation.pdf|http://docs.oracle.com/cd/E26530_01/psft/acrobat/PeopleTools_8.52_GettingStartedPeopleSoftInstallation.pdf
After that, just download Oracle virtualbox https://www.virtualbox.org/wiki/Downloads and Microsoft windows server 2008 R2 http://technet.microsoft.com/en-us/evalcenter/dd459137.aspx . and then,
Install Oracle virtualbox on you windows 7, create a virtual machine(Follow the virtual box documentation).
Install Windows server 2008 R2 on that virtual machine.
Now you have perfect environments for your peoplesoft installation.
Edited by: san_crazy on Feb 21, 2012 6:15 AM

OBIEE Simple Installation on Windows 7 Home Premium Edition 64 bit - Hangs

on Create Domain Step
I have been trying to install OBIEE Simple Installation on Windows 7 Home Premium Edition 64 bit - Hangs on Create Domain Step.
Java is installed on root director. I have incease the Java Memory to 2084MB. Still hangs. I have also tried software only install and that also fails at Start Admin server step. I have also tried to configure thru Config.bat file and it does not recognize the weblogic server. Any help is appreciated.
Here are the log files.
[2012-05-06T16:38:13.288-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Assigning value:false to variable:WLS_SINGLE_SERVER_INSTALL
[2012-05-06T16:38:13.350-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Setting valueOf(DOMAIN_HOSTNAME) to:suman-HP. Value obtained from:USER
[2012-05-06T16:38:13.397-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Using custom properties file oracle/as/install/bi/config/consumer.properties
[2012-05-06T16:38:13.709-04:00] [as] [TRACE:16] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] [SRC_CLASS: oracle.as.install.bi.biconfig.BIConfigMain] [SRC_METHOD: doExecute] ENTRY
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Assigning Port: 7001 to: DOMAIN_PORT
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Setting valueOf(DOMAIN_PORT) to:7001. Value obtained from:USER
[2012-05-06T16:38:14.848-04:00] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Domain port set to: 7001
[2012-05-06T16:38:17.929-04:00] [as] [WARNING] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] CSF Entries will not be parsed since the AdminServer is unreachable
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Executing a Jaxb workflow ...
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Begining Oracle Fusion Middleware Configuration ...
[2012-05-06T16:38:17.960-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] Begining Oracle Fusion Middleware Configuration ...
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.createDomain
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.createDomain
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: ENTRY........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@fafb2f1
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: 2........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Set the Extion Id to START........
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Did the assignment...
[2012-05-06T16:38:18.007-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: EXIT........
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] RETURN: createDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] RETURN: createDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] ENTRY ASDomain.startDomain
[2012-05-06T16:38:48.851-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: ENTRY........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: eventStatus........oracle.as.provisioning.engine.ConfigEventStatus@29a5ec1f
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: 2........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Set the Extion Id to START........
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: Did the assignment...
[2012-05-06T16:38:48.866-04:00] [as] [NOTIFICATION] [] [oracle.as.provisioning] [tid: 24] [ecid: 0000JSZru5h5yW^5xV_AiW1FdhbW00000F,0] reportStartConfigAction: EXIT........
Ora Install Logs
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space
java.lang.OutOfMemoryError: PermGen space

Hi,
Refer this SR.
SR 3-5457356311: unable to create weblogic domain in windows 7 SP1 home edition 64 bit
Earlier i have face same issues.after 4 attempts its got resolved.make sure below points
static ip set it properly (windows/hots,etc files) make sure u r pc have full permission for installation user
1.Un-install WebLogic from your machine.
2.If the installer is on a network drive it's recommended to copy the generic installer to your local file system and to a folder with no spaces or strange characters.
3.Remove the system variables you've set: JAVA_HOME, JAVA_VENDOR, and remove the %JAVA_HOME%\bin from the path system variable.
4.Run the installer as follows:
5.Open a command prompt
6.Change directory to \JDK_64\bin folder and execute:
like below,
C:\>cd C:\java\bin
C:\java\bin>java -D64 -Xms1024m -jar E:\Share_DEV\OBIEE11g_Latest\wls1035_generi
c.jar
run it now
Extracting 0%.....
Thanks
Deva

How to install 32 bit program with 16 bit installer on Windows 8.1 32 bit

Hi,
I have installed a 32 bit program that uses a 16 bit installer on Windows XP machines. The software developer of this program is out of business.
Can Windows 8.1 32 bit run a 16 bit installer? If not, any suggestions as to how I might install this program?
Thanks in advance!!!

Hi
You need to to install Windows XP in Hyper-V, because start from windows 8, they no longer support 16bit program.
or you already try DOSBox?
DOSBox

Visual Studio Ultimate 2013 can't connect to IIS Express 7.5 on Windows 7 Virtual Machine Using Parallels 6.0

Here is what I am using:
MacBook Pro - Version 10.7.5 with 128 GB SSD
Parallels 6.0
Windows 7 Home Premium
Visual Studio 2013 Ultimate
IIS Express 7.5 download that changed it to IIS Express 8.0
I also have WebMatrix but I am not planning on using it.
I am a novice when it comes to development and these technologies so I am sure that has some impact on my issues.
I have spent a lot of time looking between the various forums to find a solution and they all seem to offer parts but not an entire and workable solution to solve the two errors that I receive when starting a new project and/or web site:
1-
Configuring IIS Express Failed with the following error:
Filename: redirection.config
Error: Cannot read configuration file
2-
Unspecified Error Exception from HRESULT: 0x80004005 (E_FAIL))
Based on the research I believe it has something to do where the IIS Express files are located on the Mac side of the computer. I have tried to map them back to the Windows machine but I still get the same errors.
I understand it should be looking in the documents folder on the C Driver for the user, which is Administrator. I have tried to redirect, open the port, change the Firewall settings to no avail. I believe it is something very simple
but I am not seeing it. I did turn on the Windows Features for IIS and removed the read only check box for the IIS Folder.
I have looked at the binding and port settings but cannot figure out how to make changes there. I think I need to remove local host and replace it with my computer name. I did try this but it didn't work. Here are the defaults:
Please let me know what you think and share a possible solution. Remember that I am a novice and some things will go over my head so the more detail the better.
I am happy to not use IIS Express and just use IIS because the volume of development is low. I am also open to using VS directly onto Azure and bypassing IIS if that is the best solution. I say this because I saw some posts that state there isn't
a workaround.
Thanks for taking the time to assist.

Hello jats1910,
Your problem may more related to IIS setting and configuration. But this forum is about Visual Studio Setup and Installation. If your Visual Studio installed without problem on your OS, then you may need to consult this issue on IIS forum.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Photoshop CS5 32 Bit Installation Errors, Windows 7 Ultimate

Today I did a second install of Photoshop CS5, in a 32 bit Windows 7 virtual machine that is otherwise in fine health (up to date, yada yada).
The Photoshop installer package I had used prior to do a perfectly successful installation on my x64 Windows 7 system didn't have quite as good luck on my 32 bit system... It wouldn't do a default install at all, and even when I disabled UAC and configured all the options disabled (no need for 'em for my testing), it still emitted some errors - though in the latter case it actually completed the Photoshop installation and I was able to run Photoshop.
Note that after the first failure I disabled UAC. All installs done from an administrator account, though I did not run the installer as administrator while UAC was on.
This is not a big deal - what I needed to test with did finally get installed, but I thought Chris or someone at Adobe might like to know what the installer barfed on. Here's what it reported:
First install, failed utterly:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 10 fatal error(s), 23 error(s), 6 warning(s)
WARNING: The payload: Adobe Photoshop CS5 Core {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS5 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: OS requirements not met for {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E}
WARNING: OS requirements not met for {E4E188D2-27D5-4E4C-92CE-87F9D24AD2F6}
WARNING: OS requirements not met for {F6FA54C9-3E8F-4416-905C-DA5398DF9640}
WARNING: 1 ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0
WARNING: Payload cannot be installed due to dependent operation failure
ERROR: 6 Failed to add Font 'C:\Windows\Fonts\ACaslonPro-Bold.otf'. Error: 2
ERROR: 6 Command ARKFontCommand failed.
ERROR: 6 Failed to remove Font 'C:\Windows\Fonts\ACaslonPro-Bold.otf'. Error: 2
ERROR: 6 Error rolling back command ARKFontCommand
ERROR: 6 Failed to add Font 'C:\Windows\Fonts\AdobeArabic-Bold.otf'. Error: 2
ERROR: 6 Command ARKFontCommand failed.
ERROR: 6 Failed to remove Font 'C:\Windows\Fonts\AdobeArabic-Bold.otf'. Error: 2
ERROR: 6 Error rolling back command ARKFontCommand
ERROR: Payload {1D809D80-28A4-11DF-A816-0024E8692489} has an action "install" but no resultState
ERROR: The following payload errors were found during install:
ERROR: - Adobe Bridge CS5: Install failed
ERROR: - AdobeColorCommonSetCMYK: Install failed
ERROR: - Adobe ReviewPanel CS5: Install failed
ERROR: - Adobe Photoshop CS5 English Language Pack_AdobePhotoshop12-en_US: Install failed
ERROR: - Adobe Linguistics CS5: Install failed
ERROR: - PDF Settings CS5: Install failed
ERROR: - Adobe Photoshop CS5 Core: Failed due to Language Pack installation failure
ERROR: - Adobe CSXS Extensions CS5: Install failed
ERROR: - Adobe WinSoft Linguistics Plugin CS5: Install failed
ERROR: - Required Common Fonts Installation: Install failed
ERROR: - AdobeColorNA CS5: Install failed
ERROR: - AdobeColorPhotoshop CS5: Install failed
ERROR: - Recommended Common Fonts Installation: Install failed
FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{8CCA90E1-F5BA-456F-84BF-AD5FB2CCE13F}' from zip file 'E:\payloads\AdobeCSXSExtensions2-mul\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{56540320-C921-1029-83D9-FE864D1FC1DF}' from zip file 'E:\payloads\AdobeReviewPanel2-mul\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{AE9B837F-D135-42FC-BE03-33545B5DCBDC}' from zip file 'E:\payloads\AdobeWinSoftLinguisticsPluginAll\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{39CB2E53-5326-4939-8B5A-0402C6EFBFE3}' from zip file 'E:\payloads\AdobeColorCommonSetCMYK3-mul\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
FATAL ERROR: 1 sqlite step: (21) SQL logic error or missing database
FATAL ERROR: 1 sqlite finalize: (13) database or disk is full
FATAL ERROR: 1 CreateUninstallDataBase failed on command ARKMoveFileCommand
FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{6C7D437A-D2E9-4FE9-A4D9-A6329860835C}' from zip file 'E:\payloads\AdobeLinguisticsAll\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{0D067D13-C3D7-4EA6-B346-740CD91FD547}' from zip file 'E:\payloads\AdobeBridge4-mul\Assets1_1.zip'. Error 8 Not enough storage is available to process this command.
FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E}' from zip file 'E:\payloads\AdobePhotoshop12-Core\Assets1_1.zip'. Error 8 Not enough storage is available to process this command.
Last install, with no options selected (including, notably, deselection of the fonts):
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 8 error(s), 6 warning(s)
WARNING: The payload: Adobe Photoshop CS5 Core {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} requires a UI parent with following specification:
Family: Photoshop
ProductName: Adobe Photoshop CS5 Core_x64
This parent relationship is not satisfied, because this payload is not present in this session.
WARNING: OS requirements not met for {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E}
WARNING: OS requirements not met for {E39A5ABD-516B-46F9-A042-694BBA6A4E08}
WARNING: OS requirements not met for {E4E188D2-27D5-4E4C-92CE-87F9D24AD2F6}
WARNING: OS requirements not met for {E995AC53-954A-48D2-A861-613B8D42A9BE}
WARNING: OS requirements not met for {F6FA54C9-3E8F-4416-905C-DA5398DF9640}
ERROR: 6 Failed to add Font 'C:\Windows\Fonts\AdobeArabic-Bold.otf'. Error: 2
ERROR: 6 Command ARKFontCommand failed.
ERROR: 6 Failed to remove Font 'C:\Windows\Fonts\AdobeArabic-Bold.otf'. Error: 2
ERROR: 6 Error rolling back command ARKFontCommand
ERROR: Payload {1D809D80-28A4-11DF-A816-0024E8692489} has an action "install" but no resultState
ERROR: The following payload errors were found during install:
ERROR: - Adobe XMP Panels CS5: Install failed
ERROR: - Required Common Fonts Installation: Install failed
FATAL ERROR: Cannot create extract assets at 'C:\Program Files\Common Files\Adobe\Installers\adobeTemp\{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA}' from zip file 'C:\TEMP\Photoshop\Install\Adobe CS5\payloads\AdobeXMPPanelsAll\Assets2_1.zip'. Error 8 Not enough storage is available to process this command.
-Noel

This is for people who might find this thread via a search:
The errors I reported above (e.g., those with the .otf fonts) are related to the configuration of the "3 gigabyte address space" option, invoked by the switch /3GB in boot.ini (XP) or bcdedit /set increaseuserva 3072 (Windows 7 and Vista), which is what I was experimenting with when doing this installation.
I dropped back to the default 2 GB setting (bcdedit /set increaseuserva 2048) and tried a reinstall to confirm, and indeed the install went through smoothly.
Trying to increase your address space in a Windows 32 bit operating system through tweaking has known downsides; consider moving up to an x64 operating system instead to be able to access more RAM.
-Noel

XI/PI 7.0 Installation on Windows Machine (Virtualized Environment)

Similar Messages

Maybe you are looking for