XI's BC Adater (sender)-- 400 Bad Request
Hi,
I am trying to send data from SAP-BC to XI. XI will receive this data through XI's-BC Adapter(sender).
I have defined a routing rule in BC as specified in help.sap.com.
http://<hostname:50000/MessagingSystem/receive/BcAdapter/BC
When i test this Flowservice from BC End, i get 400 Bad Request error.
But when i specify the URL as http://hostname:50000 and test the service, the response code is 200 (success).
I even tested the URL directly posting in a explorer page and i could see that the message servlet pertaining to BC is active.
I am not able to understand why is XI-server not able to receive the request that has been posted to the URL
http://<hostname:50000/MessagingSystem/receive/BcAdapter/BC
Am i missing any configurations??
Regards,
siva Maranani
hi,
I was able to get the error details of "400:Bad Request."
The error is :
com.sap.aii.af.ra.ms.api.MessageFormatException: got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
org.xml.sax.SAXexception:got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
Below is the xmldata, that i am sent to XI:
<?xml version="1.0" encoding="iso-8859-1"?>
<sap:Envelope xmlns:sap="urn:sap-com:document:sap" version="1.0">
<sap:Header xmlns:rfcprop="urn:sap-com:document:sap:rfc:properties">
<saptr:From xmlns:saptr="urn:sap-com:document:sap:transport">BC</saptr:From>
<saptr:To xmlns:saptr="urn:sap-com:document:sap:transport">XI</saptr:To>
</sap:Header>
<sap:Body>
<rfc:ZSIVAINSERT xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<CARRID>AA<CARRID>
<CONNID>0017<CONNID/>
<FLDATE>20040417<FLDATE/>
</rfc:ZSIVAINSERT>
</sap:Body>
</sap:Envelope>
I do not understand the name/namespace it is looking for. Kindly help me out.
Regards,
Siva Maranani
Similar Messages
-
BC Sender Adapter--400 Bad Request
Hi,
I am trying to integrate BC with XI(BC Sender Adapter). BC will send Data to XI.
In BC, i have specified a routing rule( as specified in help.sap.com) using the following parameters :
URL:http://<hostname:portnumber>/MessagingSystem/receive/BcAdapter/BC
User:xiappluser
When i test this service, it gives the error 400 Bad Request. I tested the validitly of the above URL by loggin in through a web-browser. The messaging servlet is seen in active status.
<?xml version="1.0" encoding="UTF-8" ?>
- <scenario>
<scenname>MSG_SCEN</scenname>
<scentype>SERV</scentype>
<sceninst>MSG_001</sceninst>
<scenversion>001</scenversion>
- <component>
<compname>SERVLET</compname>
<compdesc>Messaging System</compdesc>
<comphost>localhost</comphost>
<compinst>MSG_001</compinst>
- <message>
<messalert>OKAY</messalert>
<messseverity>100</messseverity>
<messarea>QR</messarea>
<messnumber>801</messnumber>
<messparameter>na</messparameter>
<messtext>MessagingServlet is active.</messtext>
</message>
</component>
</scenario>
Even when i test the URL http://<hostname>:50000 from BC,the response code is 200(success). But the problem is when i try to post the request to messaging servlet (400 bad request).
Can some body suggest me how to go about.
Regards,
Siva Maranani.hi,
I was able to get the error details of "400:Bad Request."
The error is :
com.sap.aii.af.ra.ms.api.MessageFormatException: got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
org.xml.sax.SAXexception:got no name/namespace for the payload of the XRFC_DOC_TYPE_ENVELOPE.
Below is the xmldata, that i am sent to XI:
<?xml version="1.0" encoding="iso-8859-1"?>
<sap:Envelope xmlns:sap="urn:sap-com:document:sap" version="1.0">
<sap:Header xmlns:rfcprop="urn:sap-com:document:sap:rfc:properties">
<saptr:From xmlns:saptr="urn:sap-com:document:sap:transport">BC</saptr:From>
<saptr:To xmlns:saptr="urn:sap-com:document:sap:transport">XI</saptr:To>
</sap:Header>
<sap:Body>
<rfc:ZSIVAINSERT xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
<CARRID>AA<CARRID>
<CONNID>0017<CONNID/>
<FLDATE>20040417<FLDATE/>
</rfc:ZSIVAINSERT>
</sap:Body>
</sap:Envelope>
I do not understand the name/namespace it is looking for. Kindly help me out.
Regards,
Siva Maranani -
Content-Type is net being set in HTTP header. Server returns 400 Bad Request error.
Hi,
I am trying to access an XML WebService. This service requires the content type of the request to be set to "text/xml". As you can see in the source code, I am setting the req.ContentType property to "text/xml".
However, this content type seems not to be added to the HTTP headers. The server returns a 400 Bad Request error as can be seen in the log.
I've attached a System.Net.trace log and it states:
[Public Key]
Algorithm: RSA
Length: 2048
Key Blob: 30 82 01 0a 02 82 01 01 00 bc 09 30 8a 1e 03 4d 7a ea 16 d3 a8 5e d8 5b 00 c4 8a c5 9f 26 bd 7d d6 cb 8b d0 db bd 93 2d 2b 3b 84 f6 20 79 83 34 67 51 37 21 ea 56 5e 18 d8 a3 db 72 43 0e 14 77 e2 64 cb 07 b6 2a 81 c7 f5 16 dd 19 c7 d9 68 0b 3a 81 5c f0 05 c9 ed 2b 37 00 31 41 37 8b 3a 73 4a 4d ab d7 d8 87 79 35 82 01 97 e3 3c be bb 84 e5 94 bb 87 52 e3 9f b5 fb 3e 33 38 c3 eb 73 42 ee ba 1e c5 4a 33 18 a1 0d 8a d2 10 a8 c5 3....
System.Net Information: 0 : [26780] SecureChannel#31884011 - Remote certificate was verified as valid by the user.
System.Net Information: 0 : [26780] ConnectStream#26966483 - Sending headers
API-VERSION: 1
Host: test.myhost.com
Content-Length: 329
Expect: 100-continue
Connection: Keep-Alive
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=100, StatusDescription=Continue.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
System.Net Information: 0 : [26780] Connection#3888474 - Received status line: Version=1.1, StatusCode=400, StatusDescription=Bad Request.
System.Net Information: 0 : [26780] Connection#3888474 - Received headers
0: Content-type
1: text/xml
X-Debug-Token: a810dc
X-Debug-Token-Link: /service/_profiler/a810dc
Connection: keep-alive
Content-Length: 3440
Cache-Control: no-cache
Content-Type: text/html; charset=UTF-8
Date: Tue, 14 Apr 2015 11:07:11 GMT
Server: Apache
...and here's the implementation of the web request:
private void ButtonSend_Click(object sender, EventArgs e)
WebHeaderCollection whCol = new WebHeaderCollection();
whCol.Add("API-VERSION", "1");
//whCol.Add("Content-Type", "text/xml; charset=UTF-8"); <-- That doesn't work in .NET. Content-Type has to be set on the ContentType-Property
string msg = _textBoxReq.Text;
HttpWebRequest req = (HttpWebRequest)WebRequest.Create(_textBoxURL.Text);
byte[] data = Encoding.UTF8.GetBytes(msg);
req.Method = "POST";
req.ContentType = "text/xml; charset=UTF-8";
req.ContentLength = data.Length;
req.Headers = whCol;
req.GetRequestStream().Write(data, 0, data.Length);
string xml = "";
try
using (HttpWebResponse resp = (HttpWebResponse)req.GetResponse())
using (System.IO.StreamReader sr = new System.IO.StreamReader(resp.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
catch (WebException we)
using (System.IO.StreamReader sr = new System.IO.StreamReader(we.Response.GetResponseStream()))
xml = sr.ReadToEnd().Trim();
_textBoxRes.Text = xml;
Can anyone help?
Thanks,
MiRiHi _MiRichter,
Well Done!
Thank you very much for sharing the solution to us.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
Hi,
We are doing File to WCF Scenario( SOAP ). I am trying to post the Data to WCf usingf SOAP Reciver Adapter.
Getting the Following error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
Thanks in advance>>> Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
Answer: Use the third party wsdl in SOAP UI or any soap client tool and send the request and see the response. The problem here is the message structure mismatch between your request to the webservice and webservice expecting...
Possible 2 reasons:
1) You are not creating the target message based on the wsdl structure or not configured soap receiver properly.
or
2 ) Your wsdl is not latest or updated one or some changes have happened in the third party webservice hosting side. -
Msg=Unsupported response content type "text/html; 400 Bad Request
Hi All
this is the excpetion that I get when I am tring to run the
service MAnagerClient.
whether it is a list or deploy command :
can anybody help me?
Exception in thread "main" [SOAPException: faultCode=SOAP-
ENV:Protocol; msg=Unsupported response content type "text/html;
charset=iso-8859-1", must be: "text/xml". Response was:
<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN">
<HTML><HEAD>
<TITLE>400 Bad Request</TITLE>
</HEAD><BODY>
<H1>Bad Request</H1>
Your browser sent a request that this server could not
understand.<P>
<HR>
<ADDRESS>Oracle HTTP Server Powered by Apache/1.3.19 Server at
ranaldb Port 1324</ADDRESS>
</BODY></HTML>
at org.apache.soap.rpc.Call.getEnvelopeString
(Call.java:175)
at org.apache.soap.rpc.Call.invoke(Call.java:212)
at
org.apache.soap.server.ServiceManagerClient.invokeMethod
(ServiceManagerClient.java:129)
at org.apache.soap.server.ServiceManagerClient.list
(ServiceManagerClient.java:151)
at org.apache.soap.server.ServiceManagerClient.main
(ServiceManagerClient.java:237)Hello,
Your message contains a an HTTP 404 error so the URL that you are trying to access is not valid.
Can you check from a browser what is the response when you call the endpoint?
http://server:port/wedanyservices-WedanyServicesPro-context-root/MyWebService2
I believe that you do not have a service deployed at this URL this is why you have such response, and you cannot send another response.
Regards
Tugdual Grall -
"The request failed with HTTP Status 400: Bad Request." when running reports
Hi,
I installed reporting services and the install went fine. The Reporting Services are located on a different server. I can see all the reports in SCCM but when I try to run them I get the "400" error with the following details:
System.Net.WebException
The request failed with HTTP status 400: Bad Request.
Stack Trace:
at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.ReportExecutionService.LoadReport2(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.<>c__DisplayClass2.<LoadReport>b__0()
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.ProxyMethodInvocation.Execute[TReturn](RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod)
at Microsoft.Reporting.WinForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.LoadReport(String Report, String HistoryID)
at Microsoft.Reporting.WinForms.ServerReport.EnsureExecutionSession()
at Microsoft.Reporting.WinForms.ServerReport.SetParameters(IEnumerable`1 parameters)
at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerWindowsForms.SetParameterValues_DoWork(Object sender, DoWorkEventArgs e)
I can open the URL from the SCCM server but when I select a report I am unable to select any report options if available. If no options are availble the report just doesn't run, I don't get and error if I select "View Report" mutiple
times.
If I connect to the Reporting Services site on the computer where it is installed all the reports run fine.
One thing I have noticed is that when I try to change or add a role assignment for Reporting Services the edited account always reverts back to the default settings and the added Domain user is dropped.
ThanksI reviewed the topic and found a couple of steps I missed the first time around. I had to "Configure Reports to Use Report Builder 3.0 and setting the "Log on Locally" permission.
I then uninstalled the role and reinstalled it. I am still getting the 400 error.
When I inspected the SmsAdminUI.log I noticed the Error on the last line 2151811598 (it repeats in the log). I couldn't find anything specific related to it. By reading a few "related" Internet posts I came accross a intial setup
blog that noted some WMI firewall execptions (Async-in, DCOM-in and WMI-in) as require so I checked and they were not allowed on the SCCM server so I allowed them and tested with the same result. I turned them off again.
Here is the tail end of the SmsAdminUI.log
[19, PID:2684][01/24/2013 16:08:29] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[4, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[15, PID:2684][01/24/2013 16:08:30] :[ReportProxy] - User-specified default Reporting Point [INC-SQL42.deccoinc.net] could not be found, [] is now the default Reporting Point.
[1, PID:2684][01/24/2013 19:06:02] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n
[1, PID:2684][01/24/2013 23:39:14] :System.NullReferenceException\r\nObject reference not set to an instance of an object.\r\n at Microsoft.ConfigurationManagement.AdminConsole.SmsCustomDialog.get_LocaleIndependentIdentifier()
at Microsoft.ConfigurationManagement.AdminConsole.ShowDialogTaskHandler.DoTask(NavigationModelNodeBase node, SccmTaskConfiguration sccmTask, PropertyDataUpdated dataUpdatedDelegate, Boolean readOnly)\r\n
[1, PID:5008][01/25/2013 20:48:00] :System.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.ManagementObject.Initialize(Boolean getObject)
at System.Management.ManagementBaseObject.get_wbemObject()
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at System.Management.ManagementBaseObject.GetPropertyValue(String propertyName)
at System.Management.ManagementBaseObject.get_Item(String propertyName)
at Microsoft.ConfigurationManagement.ManagementProvider.WqlQueryEngine.WqlConnectionManager.GetInstance(String objectPath)\r\nManagementException details:
instance of SMS_ExtendedStatus
Description = "Error retrieving object FileType=2";
ErrorCode = 2151811598;
File = "e:\\nts_sccm_release\\sms\\siteserver\\sdk_provider\\smsprov\\SspInterface.h";
Line = 1208;
Operation = "GetObject";
ParameterInfo = "SMS_SCI_SysResUse.FileType=2,ItemName=\"[\\\"Display=\\\\\\\\INC-SQL42.deccoinc.net\\\\\\\"]MSWNET:[\\\"SMS_SITE=INC\\\"]\\\\\\\\INC-SQL42.deccoinc.net\\\\,SMS SRS Reporting Point\",ItemType=\"System Resource Usage\",SiteCode=\"INC\"";
ProviderName = "ExtnProv";
StatusCode = 2147749890;
\r\n -
Download Manager - failing with error 400 Bad Request
Each time I try to download some patches from the download basket I get this error: The request failed: 400. Download Manager says the files are Partially Downloaded but the downloads never complete (they just cycle round one after another attempting each download before failing). The connection to SAP ssems to be made correctly (see trace file extract below)
I'm running JRE version 1.4.2_12; download manager ver 2.1.130. I've tried uninstalling & reinstalling JRE & download manager (numerous times). Does anyone have any suggestions about what might be the cause?
Thanks, Chris
PS - This is the relevant part of the trace file:
24-Aug-2007 09:29:06 Opening connection to 'https://smpdla.sap.com:443/00000084/217/KGPHA68.CAR?object_id=011000358700000405252007E&filepath=00000084\217\KGPHA68.CAR&uid=S0003245349'
24-Aug-2007 09:29:06 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:13 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:13 Response received: 400 Bad Request
24-Aug-2007 09:29:13 Response Http Headers:
24-Aug-2007 09:29:13 Server=AkamaiGHost
24-Aug-2007 09:29:13 Mime-Version=1.0
24-Aug-2007 09:29:13 Content-Type=text/html
24-Aug-2007 09:29:13 Content-Length=340
24-Aug-2007 09:29:13 Expires=Fri, 24 Aug 2007 08:28:49 GMT
24-Aug-2007 09:29:13 Date=Fri, 24 Aug 2007 08:28:49 GMT
24-Aug-2007 09:29:13 Connection=close
24-Aug-2007 09:29:13 Response code: 400
24-Aug-2007 09:29:18 Notifying subscribers of download state ...
24-Aug-2007 09:29:18 The download has terminated ...
24-Aug-2007 09:29:18 getUserProxy: true
24-Aug-2007 09:29:18 getEffectiveProtocol: http
24-Aug-2007 09:29:18 detected: http / https w/o proxy request
24-Aug-2007 09:29:18 SMPResponse::sendRequestNormal
24-Aug-2007 09:29:18 Opening connection to 'http://service.sap.com:80/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'
24-Aug-2007 09:29:18 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25 Redirecting to 'https://WEBSMP108.SAP-AG.DE/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'...
24-Aug-2007 09:29:25 getUserProxy: true
24-Aug-2007 09:29:25 getEffectiveProtocol: https
24-Aug-2007 09:29:25 detected: http / https w/o proxy request
24-Aug-2007 09:29:25 SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25 Opening connection to 'https://WEBSMP108.SAP-AG.DE/~form/download_basket?_MODE=OBJECT_VERSION&OBJID=011000358700000485532007E&'
24-Aug-2007 09:29:25 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25 Response received: 200 OK
24-Aug-2007 09:29:25 Response Http Headers:
24-Aug-2007 09:29:25 Date=Fri, 24 Aug 2007 08:29:02 GMT
24-Aug-2007 09:29:25 Server=Microsoft-IIS/6.0
24-Aug-2007 09:29:25 Content-Type=text/plain
24-Aug-2007 09:29:25 Content-Length=44
24-Aug-2007 09:29:25 getUserProxy: true
24-Aug-2007 09:29:25 getEffectiveProtocol: http
24-Aug-2007 09:29:25 detected: http / https w/o proxy request
24-Aug-2007 09:29:25 SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25 Opening connection to 'http://service.sap.com:80/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'
24-Aug-2007 09:29:25 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:25 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:25 Redirecting to 'https://WEBSMP209.SAP-AG.DE/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'...
24-Aug-2007 09:29:25 getUserProxy: true
24-Aug-2007 09:29:25 getEffectiveProtocol: https
24-Aug-2007 09:29:25 detected: http / https w/o proxy request
24-Aug-2007 09:29:25 SMPResponse::sendRequestNormal
24-Aug-2007 09:29:25 Opening connection to 'https://WEBSMP209.SAP-AG.DE/~form/download_basket?_MODE=DOWNLOAD_START2&OBJID=011000358700000485532007E&_VERSION=2.1.130&'
24-Aug-2007 09:29:25 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:26 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:26 Response received: 200 OK
24-Aug-2007 09:29:26 Response Http Headers:
24-Aug-2007 09:29:26 Date=Fri, 24 Aug 2007 08:29:03 GMT
24-Aug-2007 09:29:26 Server=Microsoft-IIS/6.0
24-Aug-2007 09:29:26 Content-Type=text/html
24-Aug-2007 09:29:26 Content-Length=2416
24-Aug-2007 09:29:26 Number of URLs: 1
24-Aug-2007 09:29:26 Description lines: 56
24-Aug-2007 09:29:26 Adding HTTP1/1 Header: Range: bytes=0-*
24-Aug-2007 09:29:26 getUserProxy: true
24-Aug-2007 09:29:26 getEffectiveProtocol: https
24-Aug-2007 09:29:26 detected: http / https w/o proxy request
24-Aug-2007 09:29:26 SMPResponse::sendRequestNormal
24-Aug-2007 09:29:26 Opening connection to 'https://smpdla.sap.com:443/00000085/652/KGPHA69.CAR?object_id=011000358700000485532007E&filepath=00000085\652\KGPHA69.CAR&uid=S0003245349'
24-Aug-2007 09:29:26 Sending request to SAP Service Marketplace Server (no tunneling)
24-Aug-2007 09:29:33 A response was received from the SAP Service Marketplace Server.
24-Aug-2007 09:29:33 Response received: 400 Bad Request
24-Aug-2007 09:29:33 Response Http Headers:Yes - I've checked the address w're pointing to & have rechecked several times with our network people re: the proxy.
The trace seems to show that we're certainly making the initial connections to SAP OK - it just gives up after a few redirections.
Chris -
SIP/2.0 400 Bad Request - 'Malformed/Missing URL'
I have a problem with inbounds calls from an IP PBX to a callmanager 7.X. The call can not be stablished. This is the capture log of the call
***************************** SIP message buffer start *****************************
INVITE sip:172.24.164.7 SIP/2.0
Via: SIP/2.0/UDP 10.151.100.12:5060;rport;branch=z9hG4bKEPSVBUS863e8efa-5b23-4053-89c5-67c08916ac85
To:
From: ;tag=13946664875f3f5b48-2149-4cab-9f44-32090d7cf876
CSeq: 487 INVITE
Call-ID: [email protected]ygi-con...
Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, NOTIFY, REFER, MESSAGE, UPDATE
Contact:
Content-Type: application/sdp
Supported: replaces, norefersub
User-Agent: Epygi Quadro SIP User Agent/v5.3.2 (MIDIGW)
Max-Forwards: 70
Content-Length: 390
v=0
o=- 170 395 IN IP4 10.151.100.12
s=-
c=IN IP4 10.151.100.12
t=0 0
m=audio 6052 RTP/AVP 0 8 96 97 2 98 18 102 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-16/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:98 G726-40/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:102 iLBC/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
***************************** SIP message buffer end ******************************
13:57:05 Receive SIP message # (31/03/2014 18:57:05:315 GMT) # UDP # 494 bytes # buff size 1 # from: 172.24.164.7:5060 # to: 10.151.100.12:5060
***************************** SIP message buffer start *****************************
SIP/2.0 400 Bad Request - 'Malformed/Missing URL'
Reason: Q.850;cause=100
Date: Mon, 31 Mar 2014 18:57:17 GMT
From: ;tag=13946664875f3f5b48-2149-4cab-9f44-32090d7cf876
Allow-Events: presence
Content-Length: 0
To: ;tag=1787501341
Call-ID: [email protected]ygi-con...
Via: SIP/2.0/UDP 10.151.100.12:5060;rport;branch=z9hG4bKEPSVBUS863e8efa-5b23-4053-89c5-67c08916ac85
CSeq: 487 INVITE
***************************** SIP message buffer end ******************************
13:57:05 TLayer::MsgToTU # Msg type: 400 # TID: 286 # DID: 285
13:57:05 Try to send SIP message # (31/03/2014 18:57:05:316 GMT) # UDP # 459 bytes # buff size 1 # from: 10.151.100.12:5060 # to: 172.24.164.7:5060
***************************** SIP message buffer start *****************************
ACK sip:172.24.164.7 SIP/2.0
Via: SIP/2.0/UDP 10.151.100.12:5060;rport;branch=z9hG4bKEPSVBUS863e8efa-5b23-4053-89c5-67c08916ac85
To: ;tag=1787501341
From: ;tag=13946664875f3f5b48-2149-4cab-9f44-32090d7cf876
CSeq: 487 ACK
Call-ID: [email protected]ygi-con...
User-Agent: Epygi Quadro SIP User Agent/v5.3.2 (MIDIGW)
Max-Forwards: 70
Content-Length: 0
***************************** SIP message buffer end ******************************
13:57:05 SipSessDlg::Inc4xxProc # Got 400 message # OID: 285 # SID: 16249136886150664
13:57:05 SipSessDlg::ErrorHandling # Error: Negotiation, Move to terminate state # OID: 285 # SID: 16249136886150664
13:57:05 UA --> CM # ReportError # Error: Negotiation # Sip error: 400 # SID: 16249136886150664
13:57:05 SipSessDlg::TerminateTransactions # OID: 285 # SIPID: [email protected]ygi-con... # SID: 16249136886150664
Can anyone help me?Hello, did you edit the logs before posting it here? if not, then we are missing the fields in the incoming INVITE message from PBX.
No phone numbers in the Invite header and From & To fields are also missing.
Please check with the PBX.
***************************** SIP message buffer start *****************************
INVITE sip:172.24.164.7 SIP/2.0 ----> Number missing here
Via: SIP/2.0/UDP 10.151.100.12:5060;rport;branch=z9hG4bKEPSVBUS863e8efa-5b23-4053-89c5-67c08916ac85
To: ----> Number missing here
From: ;tag=13946664875f3f5b48-2149-4cab-9f44-32090d7cf876 ----> Number missing here
CSeq: 487 INVITE
Call-ID: [email protected]ygi-config.loc
Allow: INVITE, ACK, CANCEL, BYE, OPTIONS, INFO, NOTIFY, REFER, MESSAGE, UPDATE
Contact:
Content-Type: application/sdp
Supported: replaces, norefersub
User-Agent: Epygi Quadro SIP User Agent/v5.3.2 (MIDIGW)
Max-Forwards: 70
Content-Length: 390
v=0
o=- 170 395 IN IP4 10.151.100.12
s=-
c=IN IP4 10.151.100.12
t=0 0
m=audio 6052 RTP/AVP 0 8 96 97 2 98 18 102 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:96 G726-16/8000
a=rtpmap:97 G726-24/8000
a=rtpmap:2 G726-32/8000
a=rtpmap:98 G726-40/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:102 iLBC/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
//Suresh
Please rate all the useful posts -
I'm getting a bad request error when attempting to an outbound SIP call on a IP2IP gateway (H323 -> SIP).
It's a slightly odd configuration as we will only be using this route for outgoing calls only. The only error message I get is:
//-1/xxxxxxxxxxxx/SIP/Error/sipsdp_add_standard_lines: media_src_address is NULL; c-line is not added
SIP Invite message:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.1:5060;branch=z9hG4bK11222C
From: "anonymous" <sip:[email protected]>;tag=404CF30-282
To: <sip:[email protected]>
Date: Wed, 16 May 2007 13:09:44 GMT
Call-ID: [email protected]
Supported: 100rel,timer
Min-SE: 1800
Cisco-Guid: 15103203-2971783453-520093696-2887190163
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, COMET, REFER, SUBSCRIBE, NOTIFY, INFO, UPDATE, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Remote-Party-ID: <sip:[email protected]>;party=calling;screen=yes;privacy=full
Timestamp: 1179320984
Contact: <sip:[email protected]:5060>
Call-Info: <sip:192.168.1.1:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
May 16 13:09:44.608 UTC: //-1/xxxxxxxxxxxx/SIP/Info/HandleUdpSocketReads: Msg enqueued for SPI with IP addr: 192.168.1.2:5060
May 16 13:09:44.608 UTC: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportProcessNWNewConnMsg: context=0x00000000
May 16 13:09:44.608 UTC: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:SIP/2.0 400 Bad Request
Via: SIP/2.0/UDP 192.168.1.1:5060;branch=z9hG4bK11222C
From: "anonymous" <sip:[email protected]>;tag=404CF30-282
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 101 INVITE
User-Agent: 2N StarGate V-02.20.47
Allow: INVITE, BYE, ACK, CANCEL, OPTIONS
Content-Length: 0
Any ideas?For what its worth, I had the same problem from Callmanager to an IOS IPIPGW. I was getting the SIP/2.0 400 Bad Request - 'Malformed/Missing Contact field' error message. Turns out I had mistyped my caller id mask and was sending characters in place of numbers. By correcting it, my problem went away.
Todd -
Intermittent 400 Bad Request - Invalid Verb SharePont 2010
Hey,
This is a long shot that someone has seen this or maybe can give some hints on finding the problem.
We are getting a rare (once per day) 400 Bad Request - Invalid Verb error in SharePoint 2010 during a POST - this has happened when adding a ListItem. Once the page is refreshed it works perfectly.
We have an on-premise instance of SharePoint 2010, it happens on all browsers.
The request header looks exactly the same for a succesful update as athe error. Any ideas where to start?
The response in Fiddler is
HTTP/1.1 400 Bad Request
Content-Type: text/html; charset=us-ascii
Server: Microsoft-HTTPAPI/2.0
Date: Thu, 06 Mar 2014 10:12:48 GMT
Connection: close
Content-Length: 326
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd">
<HTML><HEAD><TITLE>Bad Request</TITLE>
<META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD>
<BODY><h2>Bad Request - Invalid Verb</h2>
<hr><p>HTTP Error 400. The request verb is invalid.</p>
</BODY></HTML>
From the post
POST http://...PAGENAME.aspx HTTP/1.1
Accept: application/x-ms-application, image/jpeg, application/xaml+xml, image/gif, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
Accept-Language: en-GB
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/4.0; GTB7.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; .NET4.0C; .NET4.0E; InfoPath.3)
Content-Type: multipart/form-data; boundary=---------------------------7de27631102b2
Accept-Encoding: gzip, deflate
Content-Length: 0
Host: XXX
Cookie: OfflineClientInstalled=1; s_cc=true; s_sq=wileyportal%3D%2526pid%253DFunctions%25257CTechnology%25257CPages%252520-%252520WGT%2526pidt%253D1%2526oid%253Dfunctiononclick()%25257BWzClick(event%25252C'g_07E87395550E47F7A3537187A352BC28')%25257D%2526oidt%253D2%2526ot%253DTABLE%2526oi%253D1939;
s_vnum=1395390204033%26vn%3D24; s_invisit=true; s_visit=1; WSS_KeepSessionAuthenticated={618701bc-c2b7-48e3-b7ff-a55e68ea6c5f}; ASP.NET_SessionId=4c0kd245pgy3kj55zxztti45; Ribbon.WikiPageTab=1259870|-1|444|-1204987594; previousLoggedInAs=; loginAsDifferentAttemptCount=;
http://url 09:29:20; Ribbon.Document=1276887|0|31|-564700907; Ribbon.Library=1276887|3|61|-564700907; Ribbon.Permission=1259887|-1|627|-233240519; Ribbon.List=1276887|4|58|-564700907; Ribbon.ListForm.Edit=682557|-1|364|-965405633; Ribbon.ListItem=1276887|-1|549|-564700907;
Ribbon.EditingTools.CPEditTab=1259870|-1|454|-1204987594; Ribbon.EditingTools.CPInsert=1259870|-1|783|-1204987594; Ribbon.Image.Image=1259870|-1|382|-1204987594
Connection: Keep-Alive
Pragma: no-cache
Authorization: NTLM TlRMTVNTUAABAAAAB4IIogAAAAAAAAAAAAAAAAAAAAAGAbEdAAAADw==
Referer: http://...page.aspxHi,
For narrowing down the issue, we need more investigations. Please provide more information about:
What web form were you posting? Is it an customized web form page? Or you could save more detail information in Fiddler and send to me via
[email protected] .
Since it is an intermittent issue, is there any application-layer awareness intermediate device such as proxy or reverse proxy/gateway between your client machine and SharePoint server? If so, please exclude the IP of SharePoint Server in the Proxy and
test the issue again.
Please check your IIS log and see if there is any error message related error 400.
Moreover, please check the performance of your SPS server, WFE and especially SQL server.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Error: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
Hi Gurus,
i am hardly fighting with this error in Communication Channel Monitoring:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
This is my scenario.
I do a File to SOAP Scenario. in SXI_MONITOR everything is fine.
My CommChan is a SOAP Receiver
HTTP
SOAP 1.1
Central Adapter Engine
Target URL is https --> i check url for correctness
Configure User Authentication is checked and username and pw are given and are correct.
Configure Certificate Authentication is checked are working
Configure Proxy is checked and Host and port are povided.
SOAP Action is provided
In Tab Module
if have this Processing Sequence
1 localejbs/AF_Modules/MessageTransformBean Local Enterprise Bean transform
2 sap.com/com.sap.aii.af.soapadapter/XISOAPAdapterBean Local Enterprise Bean 1
and this Module configuration (and only this)
transform Transform.ContentType text/xml;charset=utf-8
(according to /people/sobhithalaxmi.kata/blog/2009/07/21/cost-free-edi-integration-using-message-transformation-bean)
As far as i understand that my http header should have Content-Type: text/xml;charset=utf-8 now. I don't understand why Communication Channel Monitoring shows an error according to content TEXT/HTML.
Can anyone help me with that?
Is it possible that Transform.ContentType does not work for SOAP Receiver Adapter?
is there any chance to view the HTTP-Header of the outgoing SOAP Request (with PI Transaction / Java Enironment) to convince myself that the HTTP Header is text/xml?
Thank you in advance and Best Regards
UdoHi Thanks for your fast replies.
The Provider of the Endpoint tells me that he needs text/xml as content-type. When I sent a message to the given Endpoint via SOAP UI I can see in the HTTP LOG of SOAP UI that the Endpoint is also sending text/xml back.
Below you find the Details log out of the CommChan Monitoring.
2011-04-29 11:37:45 Information The message status was set to TBDL.
2011-04-29 11:37:45 Information Retrying to deliver message to the application. Retry: 3
2011-04-29 11:37:45 Information The message was successfully retrieved from the receive queue.
2011-04-29 11:37:45 Information The message status was set to DLNG.
2011-04-29 11:37:45 Information Delivering to channel: getxxxxx_In <---- name of my SOAP Receiver CommChan
2011-04-29 11:37:45 Information Transform: using Transform.Class: $identity
2011-04-29 11:37:45 Information Transform: transforming the payload ...
2011-04-29 11:37:45 Information Transform: successfully transformed
2011-04-29 11:37:45 Information SOAP: request message entering the adapter with user J2EE_GUEST
2011-04-29 11:37:46 Error SOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Information SOAP: sending a delivery error ack ...
2011-04-29 11:37:46 Information SOAP: sent a delivery error ack
2011-04-29 11:37:46 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Adapter Framework caught exception: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request
2011-04-29 11:37:46 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 400 Bad Request.
2011-04-29 11:37:46 Error The message status was set to NDLV.
What i am missing is a hint on the Message Transform Bean and a on a successfull sending process.
What i also tried already:
i also activated the checkbox "Do not use SOAP Envelop" in CommChan Configuration. The Result you see below (the last log entry is on first line - so read from bottom to top)
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad Request
error in response
call completed
request entering
Message processing started
As you can see there is a "call completed" and "error in response" log entry. This is missing in in the first Log. So i guess the error is still in the sending process.
Installing additional Software on the PI and use them to find out what the HTTP Request is is not possible as system access is very strict and limited :/ -
Invalid request in SOAP Scenario - "HTTP 400 Bad Request"
Hi,
By sending request to a Webservice thorugh XI ,I am getting an error as "HTTP 400 Bad Request" in MONI and the response payload looks like this
"Request Error (invalid_request)
Your request could not be processed. Request could not be handled
This could be caused by a misconfiguration, or possibly a malformed request.
For assistance, contact your network support team."
I copy pasted the request payload in SOAP UI, there its working fine.I don't know where it goes wrong.
Please help me in that...
Thanks & Regards,
YugaHi Yugapreetha,
Error: HTTP 400- Bad Request- ICM_HTTP_CONNECTION_FAILED
Description: The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications.
Possible Tips: May be because of huge message flow. Related SAP Notes-824554, 906435, 783515, 910649, 706563 If it is because of Queue problems have a look into SMQ2 .
And also here are a list of possible reasons for your problem with solutions.
It could be that it cannot find your file adapter.
1. Have you specified your hostname or IP address? Often the server cannot resolve the ip address for the hostname of your PC.
2. Is the path and port in the directory the same as the path and port of your file adapter?
3. Try question 14 (integration engine section)
/people/mark.finnern/blog/2006/01/12/finally-best-of-sdn-2005
4. also question 11 (in the same section)
5. if the avove will not fix it open XI config guide and
have a look at section
"Connecting Business Systems with an Integration Engine to the Central Integration Server"
6. Your error code is 400, so check this link,
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
For http 400 - its a bad request.
'The request could not be understood by the server due to malformed syntax.'
If you have the XI trouble shooting guide see from page 54,and also try:
1.Check that the port really is the ICM HTTP Port (transaction
SMICM) and not the J2EE port
2.If the port is wrong, change the pipeline URL in the SLD in
the business system of the Integration Server
3.Restart the J2EE Engine to reset the SLD buffer of the
Adapter Engine
Source- "XI troubleshooting guide"
Check out this SAP Note- 824554
Also this links
ICM_HTTP_CONNECTION_FAILED
Cache Refresh~
https://websmp201.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Reprocessing failed XI messages:
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Regards,
Vinod. -
I am trying to get an inputStream to another servlet from a servlet. I am using standard well documented techniques for opening the connection. The getInputStream() call throws an exception as below:
java.io.FileNotFoundException: Response: '400: Bad Request' for url: 'http://localhost:7001/shoppingCart/SOAPServlet'
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:367)
at SendServlet.doGet(SendServlet.java:40)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
Here is the code snippet:
String payload = "THE PAYLOAD WILL BE HERE";
URL url = new URL("http://Localhost:7001/shoppingCart/SOAPServlet");
HttpURLConnection conn = (HttpURLConnection)url.openConnection();
conn.setRequestProperty("SOAPMethodName","http://www.nicholaschase.com/soap/#InventorySold");
conn.setDoOutput(true);
conn.setRequestMethod("POST");
conn.setDoInput(true);
conn.connect();
OutputStream toSOAP = conn.getOutputStream();
toSOAP.write(payload.getBytes());
toSOAP.close();
InputStream fromSOAP = conn.getInputStream();
The last line throws the exception. The servlet is a part of the web application and I am able to access the servlet if a type the URL in the browser window. The web.xml which deploys the servlet is as below:
<servlet>
<servlet-name>SOAPServlet</servlet-name>
<display-name>SOAPServlet</display-name>
<servlet-class>SOAPServlet</servlet-class>
<description>Sends SOAP Information back</description>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>SOAPServlet</servlet-name>
<url-pattern>/SOAPServlet/*</url-pattern>
</servlet-mapping>
Could anybody let me know why the above exception will occurThis was posted back in 2002, but can someone tell me the solution for it. I am up against the wall with a very familier situation.
Thanks -
INVITE with display-name="" in Contact header- 400 Bad request from occas
Hi,
When a UAC sends an INVITE to OCCAS
with the Contact header in the form :
Contact: "" <sip:user@domain>
OCCAS rejects the message with 400 Bad request.
The problem comes from display-name = ""
(proven easily with sipp)
In the 400 response : X-Bad-Request: Illegal header "Contact"
It seems that the string "" as display name should be allowed according to rfc 3261:
display-name = *(token LWS)/ quoted-string
quoted-string = SWS DQUOTE *(qdtext / quoted-pair ) DQUOTE
qdtext = LWS / %x21 / %x23-5B / %x5D-7E/ UTF8-NONASCII
quoted-pair = "\" (%x00-09 / %x0B-0C / %x0E-7F)
Has anyone encountered the problem?
regards
ChristopheHi LJ, you may want to post over on the new My Oracle Support Communications Community which is moderated by and responded to by Oracle Support and accessible by Oracle customers. Many new features will be developed for the Community in the coming months, please come and check it out at https://metalink.oracle.com/CSP/ui/index.html
Regards
Graham -
ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad request
Hi Folks ,
Error : "com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 400 Bad request"
Scenario : Webservice --> XI (ccBPM) -->SAP (By verfying the response from SAP and if the data holds any error it will sends mail to SAP & webservice Admin thru mail Adapter)
1. Webservice will send the update Message to ccBPM asynchronously via XML Gateway
2. ccBPM will call RFC on SAP R/3 synchronously.
3. If R/3 response contains an application error XI will send the error message to SAP and Webservice administrators using Mail Adapter
As per our analyzation error might be if the target message is not creating based on the wsdl structure or if soap receiver not configured properly.
Could you please let me know the actual root cause and suggest me the solution ..
Thanks in Advance..
Regards,
SekharHello,
This error is for SAP PI,
Please post it in the under PI in NetWeaver Forum, for quick replies.
Regards,
Abhishek
Maybe you are looking for
-
I have a slide with an event video (mp4). I publish to HTML5. The video plays as expected in Android 4.1.2's built in browser, but it doesn't play in Android 4.2.2's built in browser. I have tried with and without autoplay. I've also tried starting
-
Nokia X6 and contacts bar re visited?
Has anyone had any issues with the latest updates for the X6 16GB? A previous update V30 I think had the contacts bar disappearing. I was wondering if this was happening with the latest update. Any feed back would be most welcome. I had to get a new
-
Need help with report quering store procedure
I posted earlier today with my code, but I thought I should start a new thread and explain my scenario properly. Sorry for that. have to find if a person visited a particular type of store, lets say pets mart in last six months. Every time a member o
-
What is wrong with England.?
I just did a real world test of my 80/20 Infinity speeds by downloading a 3.5Gb file. Picked a known good server [20000Mbps] in the UK and it downloaded at approx 4.5MB. Then downloaded the same file from a server in the Netherlands [20000Mbps] and d
-
Hi guys.. i have a gf that is getting annoyed because someone fooling around with her gave all hes friends the pincode of my gf now she gets every day invites by other people and it just continues on and on. Is there any way to change the pin code of