0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error
Hi all,
Iam getting activation error (Start Routine) while activating the transformation for the 2LIS_03_BF (Material Movements) data source for 0IC_C03 INFO CUBE. Iam getting an error for the Start Routine and the error message is as follows:
+ E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE".+
Scenario: As per my client requirment i have tried to add on info object in to the existing info cube i.e., Movement Type which is an existing field in the info source and the data source and i have tried to map the same in the transformations between the info source and the info cube and activated the transformation. Then iam getting the above said start routine error, so to avoid this i have removed that object i.e., movement type from the info cube and tried to reactivate the transformations still iam getting the same routine error.
Please suggest me th approach to resolve this issue.
Regards,
Prabhakar
Hi Chandu,
Please find below is the routine:
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
TYPES:
BEGIN OF tys_SC_1,
InfoObject: 0STORNO Reversal Indicator.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO promotion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Valuation class.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Document Date.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE StockType.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Stock Categories.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Posting date in the document.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Company Code.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Application component.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE movement Type (Inventory Management).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Relevance to Stock.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Purchase Value in Local currency.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Sales Value in Local currency.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: Sales Value in Local currency.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Amount in base unit of Measure.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Valuation Type.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW: Transaction Key.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Batch number.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Reason for Goods Movement.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Business Area.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Cost Center.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Sold-to Party.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Warehouse Number / warehouse complex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Storage Location.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Storage Bin.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Storage Type.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Vendor.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Document Number.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Base Unit of Measure.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Document Year.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Debit/Credit Indicator.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Local currency.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Plant.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Fiscal year variant.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Number of activities.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Controlling Area.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Document Line Number.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Amount in local currency.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0QUANT_B Quantity in base units of Measure.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Receiving Plant/Issuing Plant.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Physical Inventory Date.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Additional Key Field Revaluation Document
*Record.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Indicator: Valuation of Special stock.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Source System for R/3 Entity.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV movement Type is Physical Inventory.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ movement Type is Stock Adjustment.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Structured Article.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET movement Type is Return.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatically Completed Component.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN movement Type is Stock Transfer.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Transfer Posting from Article to Article
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Share of Business Volume for Set Sales Val
*ue in Local crcy.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Share of Business Volume for Set with Tax
*in Local currency.
RT_SASTST TYPE /BI0/OIRT_SASTST,
InfoObject: 0COORDER order number.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0RMA_LNK RMA Stock Transfer Reference Item.
RMA_LNK TYPE /BI0/OIRMA_LNK,
InfoObject: 0RMA_RFLG RMA Relevance Flag.
RMA_RFLG TYPE /BI0/OIRMA_RFLG,
InfoObject: 0RTHFEES Stock Transfer Fees.
RTHFEES TYPE /BI0/OIRTHFEES,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
METHODS
inverse_start_routine
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
TYPES:
BEGIN OF tys_SC_1_full,
InfoObject: 0STORNO Stornokennzeichen.
STORNO TYPE /BI0/OISTORNO,
InfoObject: 0RT_PROMO Aktion.
RT_PROMO TYPE /BI0/OIRT_PROMO,
InfoObject: 0VAL_CLASS Bewertungsklasse.
VAL_CLASS TYPE /BI0/OIVAL_CLASS,
InfoObject: 0DOC_DATE Belegdatum.
DOC_DATE TYPE /BI0/OIDOC_DATE,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0PSTNG_DATE Buchungsdatum im Beleg.
PSTNG_DATE TYPE /BI0/OIPSTNG_DATE,
InfoObject: 0COMP_CODE Buchungskreis.
COMP_CODE TYPE /BI0/OICOMP_CODE,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0CPSVLC BW: Verkaufswert in Hauswährung.
CPSVLC TYPE /BI0/OICPSVLC,
InfoObject: 0CPSTLC BW: VerkWmS Hauswährung.
CPSTLC TYPE /BI0/OICPSTLC,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0VAL_TYPE Bewertungsart.
VAL_TYPE TYPE /BI0/OIVAL_TYPE,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0MATMREA Grund für die Warenbewegung.
MATMREA TYPE /BI0/OIMATMREA,
InfoObject: 0BUS_AREA Geschäftsbereich.
BUS_AREA TYPE /BI0/OIBUS_AREA,
InfoObject: 0COSTCENTER Kostenstelle.
COSTCENTER TYPE /BI0/OICOSTCENTER,
InfoObject: 0SOLD_TO Auftraggeber.
SOLD_TO TYPE /BI0/OISOLD_TO,
InfoObject: 0WHSE_NUM Lagernummer/Lagerkomplex.
WHSE_NUM TYPE /BI0/OIWHSE_NUM,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0STRGE_BIN Lagerplatz.
STRGE_BIN TYPE /BI0/OISTRGE_BIN,
InfoObject: 0STRGE_TYPE Lagertyp.
STRGE_TYPE TYPE /BI0/OISTRGE_TYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0DOC_NUM BW: Belegnummer.
DOC_NUM TYPE /BI0/OIDOC_NUM,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
InfoObject: 0DOC_YEAR BW: Belegjahr.
DOC_YEAR TYPE /BI0/OIDOC_YEAR,
InfoObject: 0PROFIT_CTR Profit Center.
PROFIT_CTR TYPE /BI0/OIPROFIT_CTR,
InfoObject: 0DCINDIC Soll-/Haben-Kennzeichen.
DCINDIC TYPE /BI0/OIDCINDIC,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0FISCVARNT Geschäftsjahresvariante.
FISCVARNT TYPE /BI0/OIFISCVARNT,
InfoObject: 0CPNOITEMS BW: Anzahl Vorgänge.
CPNOITEMS TYPE /BI0/OICPNOITEMS,
InfoObject: 0CO_AREA Kostenrechnungskreis.
CO_AREA TYPE /BI0/OICO_AREA,
InfoObject: 0DOC_ITEM BW: Belegpositionsnummer.
DOC_ITEM TYPE /BI0/OIDOC_ITEM,
InfoObject: 0VALUE_LC Betrag in Hauswährung.
VALUE_LC TYPE /BI0/OIVALUE_LC,
InfoObject: 0COORDER Auftragsnummer.
COORDER TYPE /BI0/OICOORDER,
InfoObject: 0QUANT_B Menge in Basismengeneinheiten.
QUANT_B TYPE /BI0/OIQUANT_B,
InfoObject: 0MOVE_PLANT Empfangendes/Abgebendes Werk.
MOVE_PLANT TYPE /BI0/OIMOVE_PLANT,
InfoObject: 0RECORDMODE BW Deltaverfahren: Update Modus.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
InfoObject: 0BWCOUNTER Zusätzliches Schlüsselfeld Umbewertungsbel
*egsatz.
BWCOUNTER TYPE /BI0/OIBWCOUNTER,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0RT_MOVINV Bewegungsart ist Inventur.
RT_MOVINV TYPE /BI0/OIRT_MOVINV,
InfoObject: 0RT_MOVADJ Bewegungsart ist Bestandskorrektur.
RT_MOVADJ TYPE /BI0/OIRT_MOVADJ,
InfoObject: 0RSL_STMAT Strukturierter Artikel.
RSL_STMAT TYPE /BI0/OIRSL_STMAT,
InfoObject: 0RT_MOVRET Bewegungsart ist Retoure.
RT_MOVRET TYPE /BI0/OIRT_MOVRET,
InfoObject: 0RSL_STAUTO Automatisch ergänzte Komponente.
RSL_STAUTO TYPE /BI0/OIRSL_STAUTO,
InfoObject: 0RT_MOVTRAN Bewegungsart ist Umlagerung.
RT_MOVTRAN TYPE /BI0/OIRT_MOVTRAN,
InfoObject: 0RT_MATPOST Umbuchung Artikel an Artikel.
RT_MATPOST TYPE /BI0/OIRT_MATPOST,
InfoObject: 0RT_SASTSV Umsatzanteil am Set Verkaufswert in Hauswä
*hrung.
RT_SASTSV TYPE /BI0/OIRT_SASTSV,
InfoObject: 0RT_SASTST Umsatzanteil am Set Verkaufswert mit Steue
*r in Hauswährung.
RT_SASTST TYPE /BI0/OIRT_SASTST,
Field: RECORD.
RECORD TYPE RSARECORD, END OF tys_SC_1_full.
TYPES:
tyt_SC_1_full TYPE STANDARD TABLE OF tys_SC_1_full
WITH NON-UNIQUE DEFAULT KEY.
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0CHNGID Änderungslauf ID.
CHNGID TYPE /BI0/OICHNGID,
InfoObject: 0RECORDTP Satztyp.
RECORDTP TYPE /BI0/OIRECORDTP,
InfoObject: 0REQUID Request ID.
REQUID TYPE /BI0/OIREQUID,
InfoObject: 0CALDAY Kalendertag.
CALDAY TYPE /BI0/OICALDAY,
InfoObject: 0CALMONTH Kalenderjahr / Monat.
CALMONTH TYPE /BI0/OICALMONTH,
InfoObject: 0CALWEEK Kalenderjahr / Woche.
CALWEEK TYPE /BI0/OICALWEEK,
InfoObject: 0CALYEAR Kalenderjahr.
CALYEAR TYPE /BI0/OICALYEAR,
InfoObject: 0MATERIAL Material.
MATERIAL TYPE /BI0/OIMATERIAL,
InfoObject: 0PLANT Werk.
PLANT TYPE /BI0/OIPLANT,
InfoObject: 0STOR_LOC Lagerort.
STOR_LOC TYPE /BI0/OISTOR_LOC,
InfoObject: 0BATCH Chargennummer.
BATCH TYPE /BI0/OIBATCH,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0GN_VENDOR Lieferant.
GN_VENDOR TYPE /BI0/OIGN_VENDOR,
InfoObject: 0RECVS_VAL Zugangswert Bewerteter Bestand.
RECVS_VAL TYPE /BI0/OIRECVS_VAL,
InfoObject: 0ISSVS_VAL Abgangswert Bewerteter Bestand.
ISSVS_VAL TYPE /BI0/OIISSVS_VAL,
InfoObject: 0ISSBLOSTCK Abgangsmenge Gesperrter Bestand.
ISSBLOSTCK TYPE /BI0/OIISSBLOSTCK,
InfoObject: 0ISSCNSSTCK Abgangsmenge Konsignationsbestand.
ISSCNSSTCK TYPE /BI0/OIISSCNSSTCK,
InfoObject: 0ISSQMSTCK Abgangsmenge Qualitätsbestand.
ISSQMSTCK TYPE /BI0/OIISSQMSTCK,
InfoObject: 0ISSTRANSST Abgangsmenge Transitbestand.
ISSTRANSST TYPE /BI0/OIISSTRANSST,
InfoObject: 0RECBLOSTCK Zugangsmenge Gesperrter Bestand.
RECBLOSTCK TYPE /BI0/OIRECBLOSTCK,
InfoObject: 0RECCNSSTCK Zugangsmenge Konsignationsbestand.
RECCNSSTCK TYPE /BI0/OIRECCNSSTCK,
InfoObject: 0RECQMSTCK Zugangsmenge Qualitätsbestand.
RECQMSTCK TYPE /BI0/OIRECQMSTCK,
InfoObject: 0RECTRANSST Zugangsmenge Transitbestand.
RECTRANSST TYPE /BI0/OIRECTRANSST,
InfoObject: 0ISSSCRP Abgangsmenge Ausschuss.
ISSSCRP TYPE /BI0/OIISSSCRP,
InfoObject: 0ISSVALSCRP Abgangswert Ausschuss.
ISSVALSCRP TYPE /BI0/OIISSVALSCRP,
InfoObject: 0RECTOTSTCK Zugangsmenge Gesamt Bestand.
RECTOTSTCK TYPE /BI0/OIRECTOTSTCK,
InfoObject: 0ISSTOTSTCK Abgangsmenge Gesamtbestand.
ISSTOTSTCK TYPE /BI0/OIISSTOTSTCK,
InfoObject: 0ISSVALSTCK Abgangsmenge Bewerteter Bestand.
ISSVALSTCK TYPE /BI0/OIISSVALSTCK,
InfoObject: 0RECVALSTCK Zugangsmenge Bewerteter Bestand.
RECVALSTCK TYPE /BI0/OIRECVALSTCK,
InfoObject: 0VENCONCON Verbrauchswerte Lieferantenkonsignationsbe
*stand.
VENCONCON TYPE /BI0/OIVENCONCON,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
Field: RECORD Nummer des Datensatzes.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
TYPES:
BEGIN OF tys_SC_1__RULE_9,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_9.
TYPES:
BEGIN OF tys_SC_1__RULE_10,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_10.
TYPES:
BEGIN OF tys_SC_1__RULE_11,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_11.
TYPES:
BEGIN OF tys_SC_1__RULE_12,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_12.
TYPES:
BEGIN OF tys_SC_1__RULE_13,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_13.
TYPES:
BEGIN OF tys_SC_1__RULE_15,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_15.
TYPES:
BEGIN OF tys_SC_1__RULE_19,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_19.
TYPES:
BEGIN OF tys_SC_1__RULE_20,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_20.
TYPES:
BEGIN OF tys_SC_1__RULE_21,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_21.
TYPES:
BEGIN OF tys_SC_1__RULE_22,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0INDSPECSTK Kennzeichen Bewertung Sonderbestand.
INDSPECSTK TYPE /BI0/OIINDSPECSTK,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_22.
TYPES:
BEGIN OF tys_SC_1__RULE_25,
InfoObject: 0GN_R3_SSY Quellsystem der R/3 Entität.
GN_R3_SSY TYPE /BI0/OIGN_R3_SSY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0VENDOR Lieferant.
VENDOR TYPE /BI0/OIVENDOR,
END OF tys_SC_1__RULE_25.
TYPES:
BEGIN OF tys_SC_1__RULE_31,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_31.
TYPES:
BEGIN OF tys_SC_1__RULE_37,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_37.
TYPES:
BEGIN OF tys_SC_1__RULE_38,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_38.
TYPES:
BEGIN OF tys_SC_1__RULE_39,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_39.
TYPES:
BEGIN OF tys_SC_1__RULE_40,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_40.
TYPES:
BEGIN OF tys_SC_1__RULE_41,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKCAT Bestandstypen.
STOCKCAT TYPE /BI0/OISTOCKCAT,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_41.
TYPES:
BEGIN OF tys_SC_1__RULE_42,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0PROCESSKEY BW:Vorgangsschlüssel.
PROCESSKEY TYPE /BI0/OIPROCESSKEY,
InfoObject: 0STOCKRELEV BW: Best.Relevanz.
STOCKRELEV TYPE /BI0/OISTOCKRELEV,
InfoObject: 0STOCKTYPE Bestandsausprägung.
STOCKTYPE TYPE /BI0/OISTOCKTYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_42.
TYPES:
BEGIN OF tys_SC_1__RULE_43,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPQUABU BW: Menge in Basismengeneinheit.
CPQUABU TYPE /BI0/OICPQUABU,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0BASE_UOM Basismengeneinheit.
BASE_UOM TYPE /BI0/OIBASE_UOM,
END OF tys_SC_1__RULE_43.
TYPES:
BEGIN OF tys_SC_1__RULE_51,
InfoObject: 0BWAPPLNM Anwendungskomponente.
BWAPPLNM TYPE /BI0/OIBWAPPLNM,
InfoObject: 0CPPVLC BW: Einkaufswert in Hauswährung.
CPPVLC TYPE /BI0/OICPPVLC,
InfoObject: 0MOVETYPE Bewegungsart (Bestandsführung).
MOVETYPE TYPE /BI0/OIMOVETYPE,
InfoObject: 0LOC_CURRCY Hauswährung.
LOC_CURRCY TYPE /BI0/OILOC_CURRCY,
END OF tys_SC_1__RULE_51.
Additional types for start routine interface
TYPES:
data_package_structure type tys_SC_1_full.
Additional declaration for update rule interface
DATA:
MONITOR type standard table of rsmonitor WITH HEADER LINE,
MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
RECORD_NO LIKE SY-TABIX,
RECORD_ALL LIKE SY-TABIX,
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
INCLUDE rsbctgn_top.
INCLUDE rsbctgn_update_rules.
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
CHANGING
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
see OSS note 571669
LOOP AT DATA_PACKAGE.
IF DATA_PACKAGE-stockcat EQ 'V' OR
DATA_PACKAGE-stocktype EQ 'V'.
DELETE DATA_PACKAGE.
ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_9998
FORM routine_0012
USING
COMM_STRUCTURE type tys_SC_1__RULE_9
CHANGING
RESULT TYPE tys_TG_1_full-ISSCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '110' ) "Issue from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0012
FORM routine_0014
USING
COMM_STRUCTURE type tys_SC_1__RULE_10
CHANGING
RESULT TYPE tys_TG_1_full-RECCNSSTCK
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods receipt is considered
IF ( COMM_STRUCTURE-processkey EQ '000' "Other Receipts
OR COMM_STRUCTURE-processkey EQ '001' "Goods Receipt / Vendor
OR COMM_STRUCTURE-processkey EQ '004' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '005' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '006' "Stock Adjustment Other
OR COMM_STRUCTURE-processkey EQ '010' ) "Receipt from Stock Transfer
AND COMM_STRUCTURE-bwapplnm EQ 'MM'
only movements which are relevant for stock control
AND COMM_STRUCTURE-stockrelev EQ '1'
AND COMM_STRUCTURE-cpquabu <> 0.
only consignment stock is considered
CASE COMM_STRUCTURE-stockcat.
WHEN 'K'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
WHEN space.
IF COMM_STRUCTURE-stocktype CA 'KLM'.
RESULT = COMM_STRUCTURE-cpquabu.
RETURNCODE = 0.
ELSE.
RETURNCODE = 4.
ENDIF.
WHEN OTHERS.
RETURNCODE = 4.
ENDCASE.
ELSE.
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 4.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0014
FORM routine_0041
USING
COMM_STRUCTURE type tys_SC_1__RULE_11
CHANGING
RESULT TYPE tys_TG_1_full-GN_VENDOR
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
... determine consolidated key
IF COMM_STRUCTURE-stockcat EQ 'K'.
PERFORM gn_get_global_key TABLES MONITOR
USING COMM_STRUCTURE-gn_r3_ssy
g_c_bwbeoty_r3vendor
COMM_STRUCTURE-vendor
RECORD_NO
RECORD_ALL
CHANGING RESULT
ABORT.
if the returncode is not equal zero, the result will not be updated
Endif.
RETURNCODE = 0.
ENDFORM. "routine_0041
FORM routine_0010
USING
COMM_STRUCTURE type tys_SC_1__RULE_12
CHANGING
RESULT TYPE tys_TG_1_full-ISSVS_VAL
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
only goods issue is considered
IF ( COMM_STRUCTURE-processkey EQ '100' "Other Issues
OR COMM_STRUCTURE-processkey EQ '101' "Returns / Vendor
OR COMM_STRUCTURE-processkey EQ '104' "Material Transfer
OR COMM_STRUCTURE-processkey EQ '105' "Stock Adjustment InvD
OR COMM_STRUCTURE-processkey EQ '106
Similar Messages
-
Start Routine: Syntax error in routine 2LIS_03_BF Transformations
Hi experts,
I enhanced the 2lis_03_bf data source, and replicated the data source in bw system, i have mapped the transformations and when i try to activate the transformations it is giving the below error.
Start Routine: Syntax error in routine
when i check the start routine it is giving the below error message.
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
please provide me the solution.
Regards
venuscmHi Venu,
This seems to me like you have earlier migrated the update rules to transformations. We did the same earlier and faced issues whenever we add new fields/infoobjects. The error message was different, if i remember correctly.
We had to add the new field/infoobject added, to the structure '_ty_s_*****' that exists at the top of the start routine code. This was one disadvantage of migration of rules. -
ABAP code for BI 7.0 transformations start routine
Hi all,
I am trying to update data from DSO1 (Source1: transaction data) to Infocube(TARGET)
In the transformations Start routine, I have to read DSO2(Source2: Master data) for some fields.
DSO1 has CUSTOMER as part of key
DSO2 has CUSTOMER (key) and other fields....FIELD1, FILED2, FIELD3
Infocube to be updated with FIELDS1,2 & 3 WHILE READING DSO2.
WHERE DSO1 CUSTOMER matches with DSO2 CUSTOMER.
Also, data NOT TO BE UPLOADED into Infocube if FIELD1 in DSO2= NULL
Please give me the abap code for the above logic.
Appreciate any help in this regard.
Thanks.This is a doc from this site:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6090a621-c170-2910-c1ab-d9203321ee19
Ravi Thothadri -
Convert ABAP code in start routine/update rule to transform. start routine
Dear BW ABAPers,
I have created a custom purchasing info cube (YCP_PURC1) based on 0CP_PURC1 standard cube. I would like to convert this new data flow to BI7 (from 3.x), and convert the standard update rule to transformation. I would need to rewrite the below start routine from the standard update rule to a start routine ABAP code in the newly created transformation / start routine. My ABAP knowledge is limited. Will you please help?
*this is the start routine from the update rule. As a side note, the data source is 2LIS_02_SCL.
LOOP AT SOURCE_PACKAGE.
IF ( SOURCE_PACKAGE-cppvlc EQ 0
AND SOURCE_PACKAGE-cppvoc EQ 0
AND SOURCE_PACKAGE-cpquaou EQ 0 ).
DELETE SOURCE_PACKAGE.
CONTINUE.
ENDIF.
no_scl is initial ( e.g. for good receipts, billing)
value has to be set depending on storno
IF SOURCE_PACKAGE-no_scl IS INITIAL.
IF SOURCE_PACKAGE-storno = 'X'.
SOURCE_PACKAGE-no_scl = -1.
ELSE.
SOURCE_PACKAGE-no_scl = 1.
ENDIF.
MODIFY SOURCE_PACKAGE.
ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
Many thanks and look forward to your kind feedback.
Kind regards,
CsabaDear All, Durgesh,
thanks to you all for your valuable input. Mainly the ABAP part was more interesting for me.
Durgesh, thanks for your input, it was useful. I just had to change the info objects to data source fields and add the lines before the loop:
DATA: I_PACKAGE TYPE TYT_SC_1.
FIELD-SYMBOLS <i_package> TYPE tys_sc_1.
I_PACKAGE[] = SOURCE_PACKAGE[].
LOOP AT SOURCE_PACKAGE assigning <i_package>.
IF ( <i_package>-BWGEO EQ 0
AND <i_package>-BWGEOO EQ 0
AND <i_package>-BWMNG EQ 0 ).
DELETE SOURCE_PACKAGE index sy-tabix.
CONTINUE.
ENDIF.
no_scl is initial ( e.g. for good receipts, billing)
value has to be set depending on storno
IF <i_package>-NOSCL IS INITIAL.
IF <i_package>-ROCANCEL = 'X'.
<i_package>-NOSCL = -1.
ELSE.
<i_package>-NOSCL = 1.
ENDIF.
ENDIF.
ENDLOOP.
Points have been assigned accordingly.
Thanks,
Csaba -
Hi,
I have installed the infocubes (0PS_C08, 0PS_C081) from the Business content but I can't activate any of the transformations because of a problem in the start routine.
the message of the error:
----> E:A line of "GT_SOURCE" and "<SOURCE_FIELDS>" are not mutually
convertible. In a Unicode program, "GT_SOURCE" must have the same
structure layout as "<SOURCE_FIELDS>", irrespective of the length of a.
Does anyone have any idea how to solve the problem?
Best Regards,Hi,
In fact generally this error should occur when you migrate a flow from 3.x to 7.x, but in my case this problem showed just after the business content installation ( I didn't migrate the flow it is a 7.X standard flow).
I have checked the start routine, and no field is missing. <Source_Fields> and GT_SOURCE did have the same structure but their fields weren't put in the same order, so when I used the APPEND command it generated this error.
I've put the fields in the same order and the transformation could be activated which resolved the problem.
Thank you. -
Start Routine code error of Perform routine 9998
Hi,
I have install standard and then migrate to 7.0 all the flow of modeling.
but after loading data in PSA, while activation i will found following problem (error in routine).
In PERFORM or CALL FUNCTION ROUTINE_9998, the actual parameter SOURCE_PACKAGE is incompatible with the formal parameter DATA_PACKAGE.
please suggest me.PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
TYPES:
BEGIN OF tys_SC_1,
InfoObject: 0MPOINT Measuring point.
MPOINT TYPE /BI0/OIMPOINT,
InfoObject: 0MDOC Measurement Document.
MDOC TYPE /BI0/OIMDOC,
InfoObject: 0MPOBJ Object Number of Measuring Point Object.
MPOBJ TYPE /BI0/OIMPOBJ,
InfoObject: 0MPTYP Type of Measuring Point.
MPTYP TYPE /BI0/OIMPTYP,
InfoObject: 0PSORT Position Number of Measuring Point in Object (
*Sort Field).
PSORT TYPE /BI0/OIPSORT,
InfoObject: 0ASSEMBLY Assembly.
ASSEMBLY TYPE /BI0/OIASSEMBLY,
InfoObject: 0ATINN Internal Characteristic Number.
ATINN TYPE /BI0/OIATINN,
InfoObject: 0MDATE Date of Measurement.
MDATE TYPE /BI0/OIMDATE,
InfoObject: 0TIME Time.
TIME TYPE /BI0/OITIME,
InfoObject: 0DESIRSI Target Value for Measuring Point in SI Unit.
DESIRSI TYPE /BI0/OIDESIRSI,
InfoObject: 0TVIND Target Value for Measuring Point Is Defined.
TVIND TYPE /BI0/OITVIND,
InfoObject: 0MRMINI Lower Measurement Area Limit Is Defined.
MRMINI TYPE /BI0/OIMRMINI,
InfoObject: 0MRMINSI Lower Meas. Limit or Min. Total Counter Read
*ing in SI Unit.
MRMINSI TYPE /BI0/OIMRMINSI,
InfoObject: 0MRMAXI Upper Measurement Area Limit Is Defined.
MRMAXI TYPE /BI0/OIMRMAXI,
InfoObject: 0SIUNIT SI unit.
SIUNIT TYPE /BI0/OISIUNIT,
InfoObject: 0CJUMPSI Counter Overflow Reading in SI Unit.
CJUMPSI TYPE /BI0/OICJUMPSI,
InfoObject: 0PYEARSI Annual Performance in SI Unit.
PYEARSI TYPE /BI0/OIPYEARSI,
InfoObject: 0CREATED_BY Created By.
CREATED_BY TYPE /BI0/OICREATED_BY,
InfoObject: 0READSI Measured Value/Total Counter Reading in SI Un
*it.
READSI TYPE /BI0/OIREADSI,
InfoObject: 0READEU Measured Value in Document Entry Unit.
READEU TYPE /BI0/OIREADEU,
InfoObject: 0RECDU Unit of Measurement for Document Entry.
RECDU TYPE /BI0/OIRECDU,
InfoObject: 0CNTRRSI Counter Reading in SI Unit.
CNTRRSI TYPE /BI0/OICNTRRSI,
InfoObject: 0CDIFFSI Counter Reading Difference in SI Unit.
CDIFFSI TYPE /BI0/OICDIFFSI,
InfoObject: 0CAT_TYPE Catalog.
CAT_TYPE TYPE /BI0/OICAT_TYPE,
InfoObject: 0CAT_GROUP Code group.
CAT_GROUP TYPE /BI0/OICAT_GROUP,
InfoObject: 0FI_STATUS Processing Status.
FI_STATUS TYPE /BI0/OIFI_STATUS,
InfoObject: 0DIM_ID Dimension Key.
DIM_ID TYPE /BI0/OIDIM_ID,
InfoObject: 0CNTIND Measuring Point is Counter.
CNTIND TYPE /BI0/OICNTIND,
InfoObject: 0EQUIPMENT Equipment Number.
EQUIPMENT TYPE /BI0/OIEQUIPMENT,
InfoObject: 0FUNCT_LOC Functional Location.
FUNCT_LOC TYPE /BI0/OIFUNCT_LOC,
InfoObject: 0CAT_CODE Code.
CAT_CODE TYPE /BI0/OICAT_CODE,
InfoObject: 0MRMAXSI Upper Meas. Limit or Max. Total Counter Read
*ing in SI Unit.
MRMAXSI TYPE /BI0/OIMRMAXSI,
InfoObject: 0DOCAF Measurement Document Included for Associated T
*ask.
DOCAF TYPE /BI0/OIDOCAF,
InfoObject: 0RECORDMODE BW Delta Process: Update Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: ZSTEXT Object Number Text.
/BIC/ZSTEXT TYPE /BIC/OIZSTEXT,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
tyt_SC_1 TYPE STANDARD TABLE OF tys_SC_1
WITH NON-UNIQUE DEFAULT KEY.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
METHODS
inverse_start_routine
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
TYPES:
BEGIN OF tys_SC_1_full,
InfoObject: 0MPOINT Measuring point.
MPOINT TYPE /BI0/OIMPOINT,
InfoObject: 0MDOC Measurement Document.
MDOC TYPE /BI0/OIMDOC,
InfoObject: 0MPOBJ Object Number of Measuring Point Object.
MPOBJ TYPE /BI0/OIMPOBJ,
InfoObject: 0MPTYP Type of Measuring Point.
MPTYP TYPE /BI0/OIMPTYP,
InfoObject: 0PSORT Position Number of Measuring Point in Object (
*Sort Field).
PSORT TYPE /BI0/OIPSORT,
InfoObject: 0ASSEMBLY Assembly.
ASSEMBLY TYPE /BI0/OIASSEMBLY,
InfoObject: 0ATINN Internal Characteristic Number.
ATINN TYPE /BI0/OIATINN,
InfoObject: 0MDATE Date of Measurement.
MDATE TYPE /BI0/OIMDATE,
InfoObject: 0TIME Time.
TIME TYPE /BI0/OITIME,
InfoObject: 0DESIRSI Target Value for Measuring Point in SI Unit.
DESIRSI TYPE /BI0/OIDESIRSI,
InfoObject: 0TVIND Target Value for Measuring Point Is Defined.
TVIND TYPE /BI0/OITVIND,
InfoObject: 0MRMINI Lower Measurement Area Limit Is Defined.
MRMINI TYPE /BI0/OIMRMINI,
InfoObject: 0MRMINSI Lower Meas. Limit or Min. Total Counter Read
*ing in SI Unit.
MRMINSI TYPE /BI0/OIMRMINSI,
InfoObject: 0MRMAXI Upper Measurement Area Limit Is Defined.
MRMAXI TYPE /BI0/OIMRMAXI,
InfoObject: 0SIUNIT SI unit.
SIUNIT TYPE /BI0/OISIUNIT,
InfoObject: 0CJUMPSI Counter Overflow Reading in SI Unit.
CJUMPSI TYPE /BI0/OICJUMPSI,
InfoObject: 0PYEARSI Annual Performance in SI Unit.
PYEARSI TYPE /BI0/OIPYEARSI,
InfoObject: 0CREATED_BY Created By.
CREATED_BY TYPE /BI0/OICREATED_BY,
InfoObject: 0READSI Measured Value/Total Counter Reading in SI Un
*it.
READSI TYPE /BI0/OIREADSI,
InfoObject: 0READEU Measured Value in Document Entry Unit.
READEU TYPE /BI0/OIREADEU,
InfoObject: 0RECDU Unit of Measurement for Document Entry.
RECDU TYPE /BI0/OIRECDU,
InfoObject: 0CNTRRSI Counter Reading in SI Unit.
CNTRRSI TYPE /BI0/OICNTRRSI,
InfoObject: 0CDIFFSI Counter Reading Difference in SI Unit.
CDIFFSI TYPE /BI0/OICDIFFSI,
InfoObject: 0CAT_TYPE Catalog.
CAT_TYPE TYPE /BI0/OICAT_TYPE,
InfoObject: 0CAT_GROUP Code group.
CAT_GROUP TYPE /BI0/OICAT_GROUP,
InfoObject: 0FI_STATUS Processing Status.
FI_STATUS TYPE /BI0/OIFI_STATUS,
InfoObject: 0DIM_ID Dimension Key.
DIM_ID TYPE /BI0/OIDIM_ID,
InfoObject: 0CNTIND Measuring Point is Counter.
CNTIND TYPE /BI0/OICNTIND,
InfoObject: 0EQUIPMENT Equipment Number.
EQUIPMENT TYPE /BI0/OIEQUIPMENT,
InfoObject: 0FUNCT_LOC Functional Location.
FUNCT_LOC TYPE /BI0/OIFUNCT_LOC,
InfoObject: 0CAT_CODE Code.
CAT_CODE TYPE /BI0/OICAT_CODE,
InfoObject: 0MRMAXSI Upper Meas. Limit or Max. Total Counter Read
*ing in SI Unit.
MRMAXSI TYPE /BI0/OIMRMAXSI,
InfoObject: 0DOCAF Measurement Document Included for Associated T
*ask.
DOCAF TYPE /BI0/OIDOCAF,
InfoObject: 0RECORDMODE BW Delta Process: Record Mode.
RECORDMODE TYPE RODMUPDMOD,
Field: RECNO Data record number.
RECNO TYPE RSARECORD,
END OF tys_SC_1_full.
TYPES:
tyt_SC_1_full TYPE STANDARD TABLE OF tys_SC_1_full
WITH NON-UNIQUE DEFAULT KEY.
TYPES:
BEGIN OF tys_TG_1_full,
Field: SID Master data ID.
SID TYPE RSSID,
Field: DATAPAKID Data packet number.
DATAPAKID TYPE RSDATAPID,
Field: RECORD Data record number.
RECORD TYPE RSARECORD,
InfoObject: 0MPOINT Measuring point.
MPOINT TYPE /BI0/OIMPOINT,
InfoObject: 0MDOC Measurement Document.
MDOC TYPE /BI0/OIMDOC,
InfoObject: 0MRMINSI Lower Meas. Limit or Min. Total Counter Read
*ing in SI Unit.
MRMINSI TYPE /BI0/OIMRMINSI,
InfoObject: 0FI_STATUS Processing Status.
FI_STATUS TYPE /BI0/OIFI_STATUS,
InfoObject: 0DIM_ID Dimension Key.
DIM_ID TYPE /BI0/OIDIM_ID,
InfoObject: 0CNTIND Measuring Point is Counter.
CNTIND TYPE /BI0/OICNTIND,
InfoObject: 0EQUIPMENT Equipment Number.
EQUIPMENT TYPE /BI0/OIEQUIPMENT,
InfoObject: 0FUNCT_LOC Functional Location.
FUNCT_LOC TYPE /BI0/OIFUNCT_LOC,
InfoObject: 0CAT_CODE Code.
CAT_CODE TYPE /BI0/OICAT_CODE,
InfoObject: 0CAT_TYPE Catalog.
CAT_TYPE TYPE /BI0/OICAT_TYPE,
InfoObject: 0CAT_GROUP Code group.
CAT_GROUP TYPE /BI0/OICAT_GROUP,
InfoObject: 0CREATED_BY Created By.
CREATED_BY TYPE /BI0/OICREATED_BY,
InfoObject: 0MPOBJ Object Number of Measuring Point Object.
MPOBJ TYPE /BI0/OIMPOBJ,
InfoObject: 0READEU Measured Value in Document Entry Unit.
READEU TYPE /BI0/OIREADEU,
InfoObject: 0CJUMPSI Counter Overflow Reading in SI Unit.
CJUMPSI TYPE /BI0/OICJUMPSI,
InfoObject: 0PYEARSI Annual Performance in SI Unit.
PYEARSI TYPE /BI0/OIPYEARSI,
InfoObject: 0PSORT Position Number of Measuring Point in Object (
*Sort Field).
PSORT TYPE /BI0/OIPSORT,
InfoObject: 0ASSEMBLY Assembly.
ASSEMBLY TYPE /BI0/OIASSEMBLY,
InfoObject: 0ATINN Internal Characteristic Number.
ATINN TYPE /BI0/OIATINN,
InfoObject: 0MDATE Date of Measurement.
MDATE TYPE /BI0/OIMDATE,
InfoObject: 0TIME Time.
TIME TYPE /BI0/OITIME,
InfoObject: 0TVIND Target Value for Measuring Point Is Defined.
TVIND TYPE /BI0/OITVIND,
InfoObject: 0MRMINI Lower Measurement Area Limit Is Defined.
MRMINI TYPE /BI0/OIMRMINI,
InfoObject: 0DESIRSI Target Value for Measuring Point in SI Unit.
DESIRSI TYPE /BI0/OIDESIRSI,
InfoObject: 0SIUNIT SI unit.
SIUNIT TYPE /BI0/OISIUNIT,
InfoObject: 0DESIREU Target Value for Measuring Point in Document
Entry Unit.
DESIREU TYPE /BI0/OIDESIREU,
InfoObject: 0CNTRRSI Counter Reading in SI Unit.
CNTRRSI TYPE /BI0/OICNTRRSI,
InfoObject: 0CDIFFSI Counter Reading Difference in SI Unit.
CDIFFSI TYPE /BI0/OICDIFFSI,
InfoObject: 0RECDU Unit of Measurement for Document Entry.
RECDU TYPE /BI0/OIRECDU,
InfoObject: 0MRMINEU Lower Meas. Limit or Min. Total Counter Read
*ing Document UoM.
MRMINEU TYPE /BI0/OIMRMINEU,
InfoObject: 0MRMAXEU Upper Meas. Limit or Max. Total Counter Read
*ing in Doc. M.U..
MRMAXEU TYPE /BI0/OIMRMAXEU,
InfoObject: 0MRMAXI Upper Measurement Area Limit Is Defined.
MRMAXI TYPE /BI0/OIMRMAXI,
InfoObject: 0CNTRREU Counter Reading in Document Entry Unit.
CNTRREU TYPE /BI0/OICNTRREU,
InfoObject: 0CDIFFEU Counter Reading Difference in Document Entry
Unit.
CDIFFEU TYPE /BI0/OICDIFFEU,
InfoObject: 0RECORDMODE BW Delta Process: Record Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0MRMAXSI Upper Meas. Limit or Max. Total Counter Read
*ing in SI Unit.
MRMAXSI TYPE /BI0/OIMRMAXSI,
InfoObject: 0READSI Measured Value/Total Counter Reading in SI Un
*it.
READSI TYPE /BI0/OIREADSI,
END OF tys_TG_1_full.
TYPES:
BEGIN OF tys_SC_1__RULE_34,
InfoObject: 0DESIRSI Target Value for Measuring Point in SI Unit.
DESIRSI TYPE /BI0/OIDESIRSI,
InfoObject: 0TVIND Target Value for Measuring Point Is Defined.
TVIND TYPE /BI0/OITVIND,
InfoObject: 0SIUNIT SI unit.
SIUNIT TYPE /BI0/OISIUNIT,
InfoObject: 0RECDU Unit of Measurement for Document Entry.
RECDU TYPE /BI0/OIRECDU,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1__RULE_34.
TYPES:
BEGIN OF tys_SC_1__RULE_35,
InfoObject: 0MRMINI Lower Measurement Area Limit Is Defined.
MRMINI TYPE /BI0/OIMRMINI,
InfoObject: 0MRMINSI Lower Meas. Limit or Min. Total Counter Read
*ing in SI Unit.
MRMINSI TYPE /BI0/OIMRMINSI,
InfoObject: 0SIUNIT SI unit.
SIUNIT TYPE /BI0/OISIUNIT,
InfoObject: 0RECDU Unit of Measurement for Document Entry.
RECDU TYPE /BI0/OIRECDU,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1__RULE_35.
TYPES:
BEGIN OF tys_SC_1__RULE_36,
InfoObject: 0MRMAXI Upper Measurement Area Limit Is Defined.
MRMAXI TYPE /BI0/OIMRMAXI,
InfoObject: 0SIUNIT SI unit.
SIUNIT TYPE /BI0/OISIUNIT,
InfoObject: 0RECDU Unit of Measurement for Document Entry.
RECDU TYPE /BI0/OIRECDU,
InfoObject: 0MRMAXSI Upper Meas. Limit or Max. Total Counter Read
*ing in SI Unit.
MRMAXSI TYPE /BI0/OIMRMAXSI,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1__RULE_36.
TYPES:
BEGIN OF tys_SC_1__RULE_37,
InfoObject: 0SIUNIT SI unit.
SIUNIT TYPE /BI0/OISIUNIT,
InfoObject: 0RECDU Unit of Measurement for Document Entry.
RECDU TYPE /BI0/OIRECDU,
InfoObject: 0CNTRRSI Counter Reading in SI Unit.
CNTRRSI TYPE /BI0/OICNTRRSI,
InfoObject: 0CNTIND Measuring Point is Counter.
CNTIND TYPE /BI0/OICNTIND,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1__RULE_37.
TYPES:
BEGIN OF tys_SC_1__RULE_38,
InfoObject: 0SIUNIT SI unit.
SIUNIT TYPE /BI0/OISIUNIT,
InfoObject: 0RECDU Unit of Measurement for Document Entry.
RECDU TYPE /BI0/OIRECDU,
InfoObject: 0CDIFFSI Counter Reading Difference in SI Unit.
CDIFFSI TYPE /BI0/OICDIFFSI,
InfoObject: 0CNTIND Measuring Point is Counter.
CNTIND TYPE /BI0/OICNTIND,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1__RULE_38.
Additional types for start routine interface
TYPES:
data_package_structure type tys_SC_1_full.
Additional declaration for update rule interface
DATA:
MONITOR type standard table of rsmonitor WITH HEADER LINE,
MONITOR_RECNO type standard table of rsmonitors WITH HEADER LINE,
RECORD_NO LIKE SY-TABIX,
RECORD_ALL LIKE SY-TABIX,
SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS.
global definitions from update rules
TABLES: ...
DATA: ...
*******DATA: G_T_0EQUIPMENT TYPE STANDARD TABLE OF /BI0/MEQUIPMENT.
data: lt_data type ref to data.
data: ls_data type ref to data.
field-symbols: <G_T_0EQUIPMENT> type standard table.
field-symbols: <G_S_0EQUIPMENT> type any.
field-symbols: <FUNCT_LOC> type any.
field-symbols: <DATEFROM> type any.
field-symbols: <DATETO> type any.
constants: c_tabname type rstlogotab value '/BI0/MEQUIPMENT'.
*& Form routine_9998
text
-->DATA_PACKAGE text
-->ABORT text
-->RAISING text
-->CX_SY_ARITHMETIC_ERROR text
-->CX_SY_CONVERSION_ERROR text
FORM routine_9998
TABLES DATA_PACKAGE TYPE tyt_SC_1_full
CHANGING
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal tables "MONITOR" and/or "MONITOR_RECNO",
to make monitor entries
In this start routine missing functional location for
an equipment is added to a Data Package record, if it is available
in the master data of the equipment
create data lt_data type table of (c_tabname).
assign lt_data->* to <G_T_0EQUIPMENT>.
create data ls_data type (c_tabname).
assign ls_data->* to <G_S_0EQUIPMENT>.
assign component 'FUNCT_LOC' of structure <G_S_0EQUIPMENT> to
<FUNCT_LOC>.
assign component 'DATE_FROM' of structure <G_S_0EQUIPMENT> to
<DATEFROM>.
assign component 'DATE_TO' of structure <G_S_0EQUIPMENT> to
<DATETO>.
CALL FUNCTION 'RSAU_READ_MASTER_DATA'
EXPORTING
I_IOBJNM = '0EQUIPMENT'
I_FLG_WHOLE_TABLE = 'X'
IMPORTING
E_TABLE = <G_T_0EQUIPMENT>
EXCEPTIONS
READ_ERROR = 1
NO_SUCH_ATTRIBUTE = 2
WRONG_IMPORT_PARAMETERS = 3
CHAVL_NOT_FOUND = 4
OTHERS = 5.
CASE SY-SUBRC.
WHEN 0.
LOOP AT <G_T_0EQUIPMENT> INTO <G_S_0EQUIPMENT>.
IF <FUNCT_LOC> IS INITIAL.
DELETE <G_T_0EQUIPMENT>.
ENDIF.
master data collected and condensed
ENDLOOP.
LOOP AT DATA_PACKAGE.
IF ( DATA_PACKAGE-FUNCT_LOC IS INITIAL ) AND
( DATA_PACKAGE-EQUIPMENT IS NOT INITIAL ).
READ TABLE <G_T_0EQUIPMENT> WITH KEY
('EQUIPMENT') = DATA_PACKAGE-EQUIPMENT INTO <G_S_0EQUIPMENT>
IF SY-SUBRC = 0.
IF ( DATA_PACKAGE-MDATE >= <DATEFROM> )
AND ( DATA_PACKAGE-MDATE <= <DATETO> ).
record for equipment exists and valid
DATA_PACKAGE-FUNCT_LOC = <FUNCT_LOC>.
MODIFY DATA_PACKAGE.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
WHEN 4.
master data is not (yet) loaded
WHEN OTHERS.
problem occured, output as warning
MONITOR-MSGID = SY-MSGID.
MONITOR-MSGTY = 'W'.
MONITOR-MSGNO = SY-MSGNO.
MONITOR-MSGV1 = SY-MSGV1.
MONITOR-MSGV2 = SY-MSGV2.
MONITOR-MSGV3 = SY-MSGV3.
MONITOR-MSGV4 = SY-MSGV4.
APPEND MONITOR.
ENDCASE.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_9998
*& Form routine_0001
text
-->COMM_STRUCTURE text
-->RESULT text
-->RETURNCODE text
-->ABORT text
-->RAISING text
-->CX_SY_ARITHMETIC_ERROR text
-->CX_SY_CONVERSION_ERROR text
FORM routine_0001
USING
COMM_STRUCTURE type tys_SC_1__RULE_34
CHANGING
RESULT TYPE tys_TG_1_full-DESIREU
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
CLEAR RESULT.
IF COMM_STRUCTURE-TVIND = 'X'.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = COMM_STRUCTURE-DESIRSI
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = COMM_STRUCTURE-SIUNIT
UNIT_OUT = COMM_STRUCTURE-RECDU
IMPORTING
ADD_CONST =
DECIMALS =
DENOMINATOR =
NUMERATOR =
OUTPUT = RESULT
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MONITOR-MSGID = SY-MSGID.
MONITOR-MSGTY = 'W'.
MONITOR-MSGNO = SY-MSGNO.
MONITOR-MSGV1 = SY-MSGV1.
MONITOR-MSGV2 = SY-MSGV2.
MONITOR-MSGV3 = SY-MSGV3.
MONITOR-MSGV4 = SY-MSGV4.
APPEND MONITOR.
ENDIF.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0001
*& Form routine_0002
text
-->COMM_STRUCTURE text
-->RESULT text
-->RETURNCODE text
-->ABORT text
-->RAISING text
-->CX_SY_ARITHMETIC_ERROR text
-->CX_SY_CONVERSION_ERROR text
FORM routine_0002
USING
COMM_STRUCTURE type tys_SC_1__RULE_35
CHANGING
RESULT TYPE tys_TG_1_full-MRMINEU
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
CLEAR RESULT.
IF COMM_STRUCTURE-MRMINI = 'X'.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = COMM_STRUCTURE-MRMINSI
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = COMM_STRUCTURE-SIUNIT
UNIT_OUT = COMM_STRUCTURE-RECDU
IMPORTING
ADD_CONST =
DECIMALS =
DENOMINATOR =
NUMERATOR =
OUTPUT = RESULT
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MONITOR-MSGID = SY-MSGID.
MONITOR-MSGTY = 'W'.
MONITOR-MSGNO = SY-MSGNO.
MONITOR-MSGV1 = SY-MSGV1.
MONITOR-MSGV2 = SY-MSGV2.
MONITOR-MSGV3 = SY-MSGV3.
MONITOR-MSGV4 = SY-MSGV4.
APPEND MONITOR.
ENDIF.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0002
*& Form routine_0003
text
-->COMM_STRUCTURE text
-->RESULT text
-->RETURNCODE text
-->ABORT text
-->RAISING text
-->CX_SY_ARITHMETIC_ERROR text
-->CX_SY_CONVERSION_ERROR text
FORM routine_0003
USING
COMM_STRUCTURE type tys_SC_1__RULE_36
CHANGING
RESULT TYPE tys_TG_1_full-MRMAXEU
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
CLEAR RESULT.
IF COMM_STRUCTURE-MRMAXI = 'X'.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = COMM_STRUCTURE-MRMAXSI
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = COMM_STRUCTURE-SIUNIT
UNIT_OUT = COMM_STRUCTURE-RECDU
IMPORTING
ADD_CONST =
DECIMALS =
DENOMINATOR =
NUMERATOR =
OUTPUT = RESULT
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MONITOR-MSGID = SY-MSGID.
MONITOR-MSGTY = 'W'.
MONITOR-MSGNO = SY-MSGNO.
MONITOR-MSGV1 = SY-MSGV1.
MONITOR-MSGV2 = SY-MSGV2.
MONITOR-MSGV3 = SY-MSGV3.
MONITOR-MSGV4 = SY-MSGV4.
APPEND MONITOR.
ENDIF.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0003
*& Form routine_0004
text
-->COMM_STRUCTURE text
-->RESULT text
-->RETURNCODE text
-->ABORT text
-->RAISING text
-->CX_SY_ARITHMETIC_ERROR text
-->CX_SY_CONVERSION_ERROR text
FORM routine_0004
USING
COMM_STRUCTURE type tys_SC_1__RULE_37
CHANGING
RESULT TYPE tys_TG_1_full-CNTRREU
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
CLEAR RESULT.
IF COMM_STRUCTURE-CNTIND = 'X'.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = COMM_STRUCTURE-CNTRRSI
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = COMM_STRUCTURE-SIUNIT
UNIT_OUT = COMM_STRUCTURE-RECDU
IMPORTING
ADD_CONST =
DECIMALS =
DENOMINATOR =
NUMERATOR =
OUTPUT = RESULT
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MONITOR-MSGID = SY-MSGID.
MONITOR-MSGTY = 'W'.
MONITOR-MSGNO = SY-MSGNO.
MONITOR-MSGV1 = SY-MSGV1.
MONITOR-MSGV2 = SY-MSGV2.
MONITOR-MSGV3 = SY-MSGV3.
MONITOR-MSGV4 = SY-MSGV4.
APPEND MONITOR.
ENDIF.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0004
*& Form routine_0005
text
-->COMM_STRUCTURE text
-->RESULT text
-->RETURNCODE text
-->ABORT text
-->RAISING text
-->CX_SY_ARITHMETIC_ERROR text
-->CX_SY_CONVERSION_ERROR text
FORM routine_0005
USING
COMM_STRUCTURE type tys_SC_1__RULE_38
CHANGING
RESULT TYPE tys_TG_1_full-CDIFFEU
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
init variables
fill the internal table "MONITOR", to make monitor entries
CLEAR RESULT.
IF COMM_STRUCTURE-CNTIND = 'X'.
CALL FUNCTION 'UNIT_CONVERSION_SIMPLE'
EXPORTING
INPUT = COMM_STRUCTURE-CDIFFSI
NO_TYPE_CHECK = 'X'
ROUND_SIGN = ' '
UNIT_IN = COMM_STRUCTURE-SIUNIT
UNIT_OUT = COMM_STRUCTURE-RECDU
IMPORTING
ADD_CONST =
DECIMALS =
DENOMINATOR =
NUMERATOR =
OUTPUT = RESULT
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
DIVISION_BY_ZERO = 2
INPUT_INVALID = 3
OUTPUT_INVALID = 4
OVERFLOW = 5
TYPE_INVALID = 6
UNITS_MISSING = 7
UNIT_IN_NOT_FOUND = 8
UNIT_OUT_NOT_FOUND = 9
OTHERS = 10
IF SY-SUBRC <> 0.
MONITOR-MSGID = SY-MSGID.
MONITOR-MSGTY = 'W'.
MONITOR-MSGNO = SY-MSGNO.
MONITOR-MSGV1 = SY-MSGV1.
MONITOR-MSGV2 = SY-MSGV2.
MONITOR-MSGV3 = SY-MSGV3.
MONITOR-MSGV4 = SY-MSGV4.
APPEND MONITOR.
ENDIF.
ENDIF.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
ENDFORM. "routine_0005
TYPES: BEGIN OF TY_/BI0/PMPOINT,
MPOINT TYPE /BI0/PMPOINT-MPOINT,
MRNGU TYPE /BI0/PMPOINT-MRNGU,
END of TY_/BI0/PMPOINT.
DATA: /BI0/PMPOINT_TEMP TYPE STANDARD TABLE OF
TY_/BI0/PMPOINT,
W_/BI0/PMPOINT_TEMP like line of /BI0/PMPOINT_TEMP.
$$ end of 2nd part global - insert your code only before this line *
CLASS routine IMPLEMENTATION
CLASS lcl_transform IMPLEMENTATION.
Method start_routine
Calculation of source package via start routine
<-> source package
METHOD start_routine.
*=== Segments ===
FIELD-SYMBOLS:
<SOURCE_FIELDS> TYPE tys_SC_1.
DATA:
MONITOR_REC TYPE rstmonitor.
*$*$ begin of routine - insert your code only below this line *-*
Data:
l_subrc type sy-tabix,
l_abort type sy-tabix,
ls_monitor TYPE rsmonitor,
ls_monitor_recno TYPE rsmonitors.
REFRESH:
MONITOR,
MONITOR_RECNO.
Runtime attributs
SOURCE_SYSTEM = p_r_request->get_logsys( ).
Migrated update rule call
Perform routine_9998
TABLES
SOURCE_PACKAGE
CHANGING
l_abort.
*-- Convert Messages in Transformation format
LOOP AT MONITOR_RECNO INTO ls_monitor_recno.
move-CORRESPONDING ls_monitor_recno to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
LOOP AT MONITOR INTO ls_monitor.
move-CORRESPONDING ls_monitor to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
IF l_abort <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDIF.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "start_routine
Method inverse_start_routine
This subroutine needs to be implemented only for direct access
(for better performance) and for the Report/Report Interface
(drill through).
The inverse routine should transform a projection and
a selection for the target to a projection and a selection
for the source, respectively.
If the implementation remains empty all fields are filled and
all values are selected.
METHOD inverse_start_routine.
$$ begin of inverse routine - insert your code only below this line-
... "insert your code here
$$ end of inverse routine - insert your code only before this line -
ENDMETHOD. "inverse_start_routine
ENDCLASS. "routine IMPLEMENTATION -
Using MAX in transformations / Start Routine
Hi,
I am trying to use MAX function in an ABAP routine (transformation / Start) and it shows following error -
"Unknown column name "MAX(/BIC/ZQMCOUNT)" until runtime, you cannot specify a field list.". Here is part of my code -
>>
data: v_counter(10) type n.
SELECT MAX(/BIC/ZQMCOUNT)
INTO v_counter
FROM /BIC/AZDPM_DS300.
<<
Any thoughts please.
Regards
VikashHi there,
Sometimes you have to put some spaces between the parantehsis in the max, min or count, like this:
data: v_counter(10) type n.
SELECT MAX( /BIC/ZQMCOUNT )
INTO v_counter
FROM /BIC/AZDPM_DS300.
Can you try that?
Diogo. -
Transformation with forula - activation error RSTRAN510
Hi All, I created a transformation in which I have created a transformation and one of the rules is to Multiply a Currency and by a quantity and store in in a currency unit.
i am getting getting these errors on activating it:
1.
Error while activating transformation
Message no. RSTRAN510
2.
Syntax error in GP_ERR_RSTRAN_MASTER_TMPL, row 697 (-> long text)
Message no. RG102
Diagnosis
The field "SOURCE_FIELDS" is unknown, but there is a field with the similar name ...
3.
Error during generation
Message no. RSTRAN511
4.
Error when activating Transformation 08SXTSJCQ7AG9ICO24YU09QLXRSZKLCB
Message no. RSO404
Here are some screenshots of my config:
Transformation:
http://picasaweb.google.com/lh/photo/PdpDU5ZmnXbqycYmfBFK5g?feat=directlink
Rule:
http://picasaweb.google.com/lh/photo/aPCmmMR0lnR03FOAb3afDw?feat=directlink
Formula:
http://picasaweb.google.com/lh/photo/KxVC7rx1D6guae58UyTi3Q?feat=directlink
http://picasaweb.google.com/lh/photo/BkoWvXTdp5Mhnwpd3zrO_w?feat=directlink
Note that if I create a similar transfomation without the formula rule but evertyhing else same, it gets activated
http://picasaweb.google.com/lh/photo/CpvrJlyF6c1jkIZHR_V9QQ?feat=directlink
How to resolve this?Hi,
try to create a routine (instead of formula) and put the following coding
there is a method compute_XXX (where XXX is name of target-object)
There you will find the following coding line
$$ begin of routine - insert your code only below this line -
After this one you have to add:
result = source_fields-prc_mat * source_fields-sal_quant
i think this should work fine.
Greetings -
Vofm fomula routin activation error.
i have complete a formula via tc:'VOFM', and i would like to active the routin, but get error message" Report/Program statement missing, or program type is i (include)". what can i do?
Hi,
You have to create the routine via VOFM, an include will automatically be created in the required main include/program. Put you your codes in the routine/form activate it. then got back to VOFM :
- select routine
- Click on EDIT and activate
This will activate your codes and routine.
Regrads,
Dev. -
Dear All,
I have activated the infocube 0sd_c03 with grouping "in data flow before" and the infocube is activated with datasources
2LIS_11_VAITM
2LIS_11_VAHDR
2LIS_12_VCITM
2LIS_12_VCHDR
2LIS_13_VDITM
2LIS_13_VDHDR in 3.x where as
TRCS 2LIS_13_VDITM -> CUBE 0SD_C03 in transformation with DTP.
when I activate the transformation I get error as mentioned below:
Start Routine: Syntax error in routine and in the start routine when I check the details of the error is
E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
If source pakage is replaced by data package the system message is data_package is not available.
What do I do to resolve this issue.
KShi,
There is a structral diffrence between SOURCE_PACKAGE and DATA_PACKAGE
so you need to change tys_SC_1_full
go through the below links for similar problem
Re: 0IC_C03: 2LIS_03_BF Transformation Start Routine Activation error
Re: 2LIS_03_BF transformation problem -
Start routine errors while activating transformations 2LIS_13_VDITM
Hi Friends,
I have an error while activating transformation for Cube: 0SD_C03
Transformation Z2LIS_13_VDITM
The start routine error is like this->
Start Routine: Syntax error in routine
Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_2S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_3S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_4S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_5S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0SUBTOT_6S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0QUANT_B, group: 01 Standard Group): Syntax error in routine
Rule (target: 0DOC_ITEMS, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0COST_VAL_S, group: 01 Standard Group): Syntax error in routine
Rule (target: 0GR_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0NT_WT_KG, group: 01 Standard Group): Syntax error in routine
Rule (target: 0VOLUME_CDM, group: 01 Standard Group): Syntax error in routine
Rule (target: 0BP_GRP, group: 01 Standard Group): Syntax error in routine
Rule (target: 0CP_CATEG, group: 01 Standard Group): Syntax error in routine
S:RSTRAN:552 38 0CRM_PROD 01 Standard Group 0MATERIAL
Rule (target: 0DEB_CRED, group: 01 Standard Group): Syntax error in routine
Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
Key rule 43 (target field: 0VERSION): Initial update set
pls guys if some one can suggest me to solve this i would be very greateful
Bala
Edited by: bala dondeti on Jun 20, 2011 12:32 PM
Edited by: bala dondeti on Jun 20, 2011 12:43 PMThanks for the info Umesh,
Just to be sure - I should simply change "SOURCE_PACKAGE" to "DATA_PACKAGE" in the code of the start routine? "Source_Package" is present in two places in that code:
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
and then after that in:
Migrated update rule call
Perform routine_9998
TABLES
SOURCE_PACKAGE
CHANGING
l_abort.
Or should I revert to the 3.5 version? (as a side note, that Data Source (2LIS_13_VDITM) has been activated in 7.0 version by default, when I replicated data sources in BW).
Praveen, as to your remarks, I have the datasource 2LIS_13_VDITM (in version 7.0) active, along with the appropriate Infosource. Transformation between the DataSource and InfoSource is active, and only the transformation between the InforSource and the Cube poses problems.
BR,
Alek -
Error while transporting Transformation: Syntax error in Start Routine
Hi Everyone,
I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
'Start Routine: Syntax error in routine'
I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
Any suggestions on the steps I could take to transport the transformation to my quality system?
Thanks,
RamHi Ajay, Shanthi, svu and Ray
I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package). -
Data Source 0HR_PA_0 Syntax Error in the start routine while activating
Hi All,
I have migrated the Business content for the data source 0HR_PA_0
While activating the transformation-2 there is errors like:
Start Routine: Syntax error in routine
Rule (target: 0HDCNT_LAST, group: 01 Standard Group): Syntax error in routine
Rule (target: 0AGE_KYF, group: 01 Standard Group): Syntax error in routine
.................... etc
I need help to resolve this issue.
Thanks & Regards,
SavithaHello Jurgita,
When Data Source was migrated the codes related to COMM_STRUCTURE was missing in the start routinue.
Following codes (in bold) with regard to COMM_STRUCTURE added and then got activated
4. *--
5. COMM_STRUCTURE type tys_sc_1__rule_25,
6. l_subrc type sy-tabix,
7. l_abort type sy-tabix,
8. ls_monitor TYPE rsmonitor,
9. ls_monitor_recno TYPE rsmonitors.
10.
11. REFRESH:
12. MONITOR.
13.
14. * Runtime attributs
15. SOURCE_SYSTEM = p_r_request->get_logsys( ).
16. move-corresponding SOURCE_FIELDS to COMM_STRUCTURE.
17.
18. * Migrated update rule call
19. Perform routine_0011
20. using
21. COMM_STRUCTURE
22. CHANGING
Regards,
Savitha
Edited by: Savitha Ravi on Jun 19, 2009 6:34 AM -
Raising cx_rsrout_abort exception in Start Routine of Transformations
Hello Abap OO Gurus:
This is likely a very simple question but I'm brand new to Abap OO and despite reading and searching, I cannot convert some old abap code used in the start routine of business content in BW to be used in the Transformation start routine in SAP BI.
My Start Routine inside a BI 7.0 transformation rule has a method declared like this:
<b>METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.</b>
The Exception "cx_rsrout_abort" has replaced what used to be a simple ABORT data field. The <u>old code I want to replace was just "abort = 1'.</u>
But now it seems like I have to use TRY... ENDTRY statement to raise Exception "cx_rsrout_abort". I am inside the abap code of the Method "start routine"
METHOD start_routine.
*=== Segments ===
Could some kind soul educate me as to how to raise the Exception "cx_rsrout_abort" inside the Method start routine?
thanks in advance, DavidTx HDev:
we are almost there... I have that PDF but never got thru to the rest of the Appendix B as my project is just too crazy...
When try what Appenix B suggest..
<u>"raise exception type CX_RSROUT_SKIP_RECORD."</u>
I get the following Warning msg which makes sense...
<b>"W:The exception CX_RSROUT_SKIP_RECORD is neither caught nor is it
declared in the RAISING clause of "START_ROUTINE".</b>
The METHOD statement in the start routine never declares another exception other than cx_rsrout_abort as seen below:
METHODS
start_routine
IMPORTING
request type rsrequest
datapackid type rsdatapid
EXPORTING
monitor type rstr_ty_t_monitors
CHANGING
SOURCE_PACKAGE type tyt_SC_1
RAISING
cx_rsrout_abort.
Maybe NW2004s has a bug here... I'm hoping that a SAP Developer reads this posting and can enlighten us all... otherwise I'll have to post a OSS msg
So the mystery is still how to do
"raise exception type CX_RSROUT_ABORT" and make this equal to ABORT = 1
which makes the start routine skip a record
tx again, David -
2LIS_03_BF transformation problem
Hi
I am using
TRCS 2LIS_03_BF_TR -> CUBE 0IC_C03
installed from Business Content but when I tried to activate it ,it gave me error in start routine.
Error is:
:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter
"SOURCE_PACKAGE" is incompatible with the formal parameter
"DATA_PACKAGE".
I havn't changed anythin in it, its directly from BC but still with this error.
Thanks
NavneetHi
There is structral diffrence between SOURCE_PACKAGE and DATA_PACKAGE
so we need to change tys_SC_1_full, Changes are
InfoObject: 0RT_RMAPIDA RMA Inventurdatum.
RT_RMAPIDA TYPE /BI0/OIRT_RMAPIDA,
comment out RT_RMAPIDA
and add these new fields to tys_SC_1_full
RMA_XCC TYPE /BI0/OIRMA_XCC,
RMA_LNK TYPE /BI0/OIRMA_LNK,
RMA_RFLG TYPE /BI0/OIRMA_RFLG,
RTHFEES TYPE /BI0/OIRTHFEES,
before this line
Field: RECORD.
RECORD TYPE RSARECORD,
and this start routine will work properly then.
Cheers
Maybe you are looking for
-
How do I get photos to my video timeline to be blue instead of purple?
How do I get photos to my video timeline to be blue instead of purple?
-
Can I Rotate Without Having To Go Back to the Library Module?
I only see rotate arrow buttons in the Library module. Is there another button in Develop so I don't have to keep going back?
-
ORA-1653: nable to extend table
Hi guys. Had this error in the alert.log file. Mon Jun 26 09:10:37 2006 ORA-1653: unable to extend table APPLSYS.WF_LOCAL_ROLES_STAGE by 4849950 in tablespace APPLSYSD The tablespace have three datafiles of which its both datafiles are only 40% full.
-
I have an german licence key of Adobe Framemaker 9,10,11 can I use on English?
I have an german licence key of Adobe Framemaker 9,10,11 can I use on English?
-
Problems with hp deskjet 870 Cse and Win7 64 bit drivers
I have been using this printer for years without problems. WinXP and Win7 working fine on my 32 bit laptop. Recently upgraded to a 64 bit laptop and the drivers installed just fine however the danged thing doesn't print. Even the 'test print' job