10.2.0.3 bug, curious

Hi Guys,
there's a bug repoted in 10.2.0.3 for the below:
View with select list subquery which is referenced in multiple places in the
outer query block view merging of the view can lead to an ORA-600 [qctcte1],
a dump, or wrong results.
can anyone give me an example of such sql statement?
thanks

what happens is that in 10.2.0.5,
Bug 5395270 OERI[qctcte1] / dump / wrong results from view merging --< this bug was fixed
but cause some performance problem and hence this fix below is introduced:
Bug 8560951 No view merging with scalar subquery in SELECT list with fix for bug 5395270
thanks

Similar Messages

Strange Flash behaviour

Here is a video explanation:
www.youtube.com/watch?v=La5yFqNYWCk
If I use the Pen tool and attempt to draw a line within a symbol, the anchor point on the other end of the line moves [out of my control] to the right. I'm not sure whether this is a bug or a feature, but I'm leaning towards the former; either way, please could someone offer me a solution?
Adobe Flash CS5
Mac OSX 10.7.2
I will gladly supply any extra information.
Thanks.

Good question, I never thought to test that.
I've found that the bug, curiously, is isolated to this one symbol. All other symbols in the same FLA do not exhibit the error, nor do those in new FLAs; however, this particular symbol is affected in the current and new FLAs.
I can't actually recreate the error in any other symbol.
Here is all the relevant information about the symbol (called 'Needle' [of a record player]) that demonstrates the bug:
Type: button.
Contains 4 keyframes.
The first (up) contains 2 graphics, the second (over) and third (down) contain 3 graphics, the last (hit) contains a single shape.
All the graphics only contain shapes.
I have used the pen tool with no apparent errors in:
Existing and new symbols on other layers (in relation to 'Needle') in the same FLA.
New symbols on the same layer in the same FLA.
Old and new symbols in other FLAs.
I have also taken graphics from 'Needle' and pasted them outside; the pen tool then works within them.
Thus, it can be said that within 'Needle', and all the symbol within 'Needle', and any symbols within those (etc.) will exhibit the bug.
If there are any others tests you want me to do, please ask.
(My progress on the project I am working should no longer be inhibited.)

Mac mini and mouse: Curious bug

My Mac mini shows a quite curious bug. When I move the mouse while logging off an user - whether an admin or one with restricted rights - the mouse freezes. I have to log in and off again to make the mouse move again. I changed the mouses and re-installed the OS. It didn't fix the bug. Has anyone an idea how to solve this problem?
Message was edited by: Malah

Hi there,
I am also having bizarre freezes of the mouse (wireless USB Microsoft (yuk) which had been fine. The mini, however, has been weird anyway lately. I had to "zap" P RAM something not done since golden days ) to get the external firewire drive to mount again...I am now running a 7 port hub(firewire and Usb) (iogear) and all is working well . Mouse , however is plugged right into the USB port on Mac Mini . It also seems to not be playing well with Firefox version 2 (disn't do the FF 3 update yet because I was already having problems)...
I'd say I'm getting mouse freezes every time I leave the computer for more than 10 minutes. There seems to be some relationship with "sleep' too...running 10.4.11 and have it set NOT to sleep because of this, but it does anyway and then freezes and won't wake up (after left on for a while). I have run all the utilities including Onyx & they say all systems GO.. I do plan to work on it via Disk Warrior by connecting it to the G5...
Any ideas? I use a satellite ISP...This started to happen about a month ago...all of this sleep, freeze, missing port behavior...I have a lot of plugins for firefox as I'm an active twitterer (using TWhirl). so there are a bunch of new apps and online apps I'm beta testing too...there may be something here !
Thanks so much.
best to y'all
Liz

BT Cloud, another curious bug

Another curious bug to add the the BT Cloud chamber of horrors.
BT Cloud somehow decided on the Web Interface that my main device contained two separate top levels, 'D' and 'd'.
Most things I had backed up from my D drive showed up under 'D', with just a few under 'd'.
On the PC client, everything showed up under 'd'.
The extra 'd' was a bit irritating on the web interface, and none of the files saved in it was significant, and so I decided to delete it in the web interface.
Result:
1: 'd' correctly deleted in the web interface (they seem to have fixed the bug where you couldn't delete folders in the web interface)
2: 'd' deleted from what shows up in the PC client. As the PC client never showed anything under 'D' but everything under 'd', when I look at my main device it now shows 'This folder does not contain any files.'
3: All the files still showing up correctly under 'D' on the web interface
4: PC client still knows what it is trying to back up from the D drive:
- the auto-backup folders show up correctly when I look in 'Add to Backup' (usability bug: 'Add to Backup' doesn't admit to what path it thinks they are from)
- it correctly backs up new files added to these auto-backup folders
- it still knows about the backed up files if I look under 'All Files'; and remembers correctly what directory they came from. (usability bug: but not easy for the user to see what directory they came from)
5: No files actually deleted from my PC.
I don't trust BT Cloud at all yet, so I am only experimenting and waiting till it is ready as a backup solution. Meanwhile, all my files are backed up elsewhere. I didn't trust BT Cloud not to make an even bigger silly and delete lots of my original files; I trust it even slightly less now.
BT Cloud still has the makings of something that might be useful eventually, so I still keep hoping and trying ....

Hi Sjtp,
Thanks for the feedback. I will make sure the cloud team get this useful info.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Curious sizing bug in Photos

Greetings Folks
There appears to be a weird bug in Photos which has been there since iOS 4. Pics shot in JPEG format shot on my Canon EOS 1000D and transferred to my iPad 2 with the Camera Connection Kit should be 3888 x 2592 pixels but certain photo editing apps only "see" them as being 2048 x 1365. A few apps see them at the correct size, Photogene being an example.
Moreover, if I shoot RAW (as I generally do) and send the imported pic to another app without first processing the RAW image through PhotoRaw first, editing apps only see them at 1936 x 1288. It's as if Photos is ignoring the actual size of the imported image and handing off an image only half the size. If I process RAW images through PhotoRaw first, saved JPEGs from this app are seen at the correct size by other apps.
Since I shoot RAW virtually all the time, this bug doesn't affect me but the few occasions when I need to shoot in JPEG format, I'm presented by this quandry. Has anyone else seen this behaviour and should I file a bug report with Apple?
=:~)

Hi Lucas
I don't have this problem but here is the link to the Apple feedback page. As there is no specific page for iPhoto IOS, you can use the iphone one.
http://www.apple.com/feedback/
Cheers

Curious Folder Bug in Leopard

If I create a folder on my desktop and move it to just under the Spotlight icon in the menu bar it goes 'poof' and disappears! I'm using two monitors and the main is left, so the menu bar ends and the second monitor takes over the real estate to the right.
If I open a new Finder window and navigate to the desktop, the folder is there, but I still can't see it on the actual desktop.
If I select all desktop items and "clean up" the selection, the folder will appear, but it seems fickle, sometimes appearing on monitor 1, other times on monitor 2.
Other times, if I move the mouse (anywhere on the screen) the folder pops into view - on the 2nd desktop.
Weird!

Snap to grid is not enabled. But interestingly, if snap to grid is enabled, I can still make the folder disappear. Typing the first letter of the folder name (assuming nothing else is going to take precedence in the hierarchy) the folder pops back into view on the desktop. So at least there is a way to make it visible again. Guess I'll keep the snap enabled! Thanks.
It would seem to me that the OS engineers wouldn't want to allow you to loose a folder in that manner. But at least it's on a MAc and finding ways to get your data is always doable (or most of the time).
Thanks guys.

[CS4 Win] Weird 'Bug' giving overset text in duplicate object - stumped!

Hi all,
I am experiencing a perculiar 'bug' in InDesign CS4 (Windows).
I have a triangular text frame rotated by 45° with a 0.2mm inset.
This frame contains two words who's point size is just big enough to fit the text in the frame without it oversetting.
The leading is set to 100% of the point size.
When I duplicate the text frame either with the Duplicate command, cut 'n' paste or alt dragging, the new text frame is overset!
I cannot find any difference between the two objects what so ever.
If, in the original text frame, I change the text frame options inset to 0 and then back to the original 0.2 mm, I get overset!
Scaling the original up by any amount also causes overset, as does increasing the height of the frame and then returning it to its original height.
I have tried exporting as a snippet but the new placed text frame oversets.
Does anyone have any idea might be causing this behaviour.
It doesn't do it in CS3 or in CS5.
I have included a link to an example file, you will need to have the same font (HelveticaNeueLTPro-BlkCn) to see the problem.
I can't upload this for obvious copyright reasons - sorry.
http://dl.dropbox.com/u/7307068/flashes.indd
Thanks for ANY input.
Simon Kemp.

Hi Simon.
My initial reaction was it might have to do with the third party plugins, but I exported to .inx to strip them out, and then NONE of the frames had both words. I also thought it might be that the the frame isn't a right triangle and the slight angles on the vertical and horizontal might be a problem, but I made a new frame with the same hypotenuse but the correct legs, and that didn't make a difference, either. (I made it by drawing a rectangular frame exactly half as high as it was wide, adding a point at the center of the top path segment with the pen, then deleted the two upper corner points).
I have to say my conclusion is that the problem here is there really isn't enough room in the frame for both words with that inset. Adding 3% to the size of the frame (by clicking the chainlink to link changes to height and width, then typing +3% after the height [adding in the scale fields scales the type, too, so don't do it there] and pressing Enter) brings both words into view.
Curiously, When I opened the file in CS5, the words fit without messing around. Cutting and pasting the frames with overset made both words appear. This could be due to the new way ID deals with text in non-rectangular shapes. When I opened the .inx file without the plugin information in CS5 all the text was visible in all frames. I think the only reason the text ever fit in the original CS4 file might have to do with one of the plugins, but that's pure speculation. I don't think there's any sort of bug here.

Spinning cursor mail bug

Every once in a while after a restart; I'll get what I call the New Mail/Widget bug; I can't open compose new message in mail; (spinning cursor) and the yellowpages widget has no text input field.
I solve the problem with a simple restart or a combo update.
Im just curious as to what the cause of this problem is? A bad bootup?
thx

Yellow pages widget? Did I miss an iPhone update or are you in the wrong forum?

List of bugs fixed in the July 2013 update

In addition to all the great features in this week’s release, many bugs were also fixed in the July 10th update. Here is a summary:
Import
H.264 444 video files are incorrectly decoded as 422. One manifestation is green artifacts.
Some XDCAM 422 QuickTime clips fail to import on Mac, and imports only audio on Windows.
hang on quit if project contains SonyRaw Format clips imported via Media Browser
Crash on dragging an empty bin from Media Browser to the Project panel, with error message “[..\..\Src\ProjectActions.cpp-2653]”
Growing Files
Growing file sometimes becomes media offline while editing
Growing file sometimes goes offline while editing
Capture
When capture codec is set to DNxHD 145, clips captured at 1080i setting are created at 1080p.
If Capture panel and Edit to Tape panel are open at the same time, Capture panel will fail to capture video.
Capture Device in the capture window becomes Offline after closing the Edit to Tape panel
Crash on batch capture with tape deck connected via SDI. Error message: [..\..\Src\ManualRecorderUtilities.cpp-348]
Export
[FCP XML Export] No audio with clip if track is muted at export with XML
OMF Export does not trim audio properly if audio comes from multicamera sequences
FCP XML’s sometimes lose the correct output assignment and panning information on import.
Sequence previews are used during movie export regardless of the “Use Previews” Export Settings option being selected or not.
Some muxed h264 CBR exports are longer than the original source material
Duration of H264 encodes is shorter than the source by up to a second.
Smart Render: Media from some decks does not smart render properly
Control Surface
Faders on control surface do not work with an adaptive clip in a multichannel sequence.
Some control surface faders for Clip Mixer are not updated when switching between sequences for Clip Volume value of 0.0
Toggle Control Surface Clip Mixer Mode button assignment provides no visual feedback.
Mute Buttons do not update correctly for some control surface interfaces
Edit to Tape
Edit to Tape Panel: after edit is complete, edit data remains stored in deck, and deck often remains in Insert or Assemble mode. Causes tape export failure on some decks.
Edit to Tape panel: “Delay Movie Start by [x] frames” is not properly honored in some case
Audio tracks in Edit to Tape panel do not default to A1 through A4 when switch from “Insert” to “assemble,” then back to Insert
Export to Tape panel: when switching from Assemble to Insert, all audio channels are selected, even when the channels are unsupported.
Transmit: Occasional crash on toggling Transmit during timeline playback [Mac only]
Playback
After external I/O device is disconnected, CTI sometimes fails to move
after stopping playback, AVC-Intra and DVCPro HD files take 15 – 20 seconds to render frames for playback
Some XDCAM QT MOV clips show Media Pending graphic for extended period and exhibit poor scrubbing and playback
Audio
Various issues interfacing with audio drivers on Mac that could result in failed audio recording or playback, issues connecting to audio devices, audio issues upon the computer waking.
Poor quality audio when using some USB microphones in conjunction with a capture card
Audio distortion with audio enabled on some capture cards
Adaptive clips exported to Audition lose audio when channels are remapped.
Channel mapping of 5.1 clips exported to Audition is sometimes incorrect
Only the first audio channel of SonyRaw plays clips play when loaded into the Source monitor from Media Browser
Crash with error message “[..\..\Src\Content\AudioSequenceContent.cpp-903]”
Timecode
Timecode for some DPX clips is not handled properly
Premiere does not read correct start timecode from .mp4 files from some cameras
Merged Clips: “Reveal in Project” does not work with Merged Clips
Relink
Media not relink-able after converting a project from CS6 to CS7: Error message “Cannot Link Media: The selected file cannot be linked because it has 2 audio channels and the clip was created with 1 audio channels”
“Log Note” in Clip Metadata is lost after relinking
Sequence Settings: New Sequence from Clip: Some stereo clips yield a sequence with audio set to 10 Channel Mono
Timeline/Editing
The Timeline panel does not redraw correctly after audio keyframes are deleted.
Relevant menu options are unavailable when an empty timeline has focus.
Record Voice Over does not work when an Out point is set in Timeline
New audio tracks initialize at minimum track height in cases where they should be expanded
Crash on undoing a razor edit with with multiple clips selected, with error message “../Src/Sequence/PersistentGroup.cpp-108” or “../Inc/Sequence/TrackItemGroup.h-215”
Multicam
Upon flattening a multicam sequence, transitions are applied on the wrong layers. Can lead to crash with error message […Src\Sequence\Action\SequenceAddTransitionAction.cpp-57".]
“Extend Previous Edit”: command can result in incorrect media being used.
Duplicate frame indicators are shown in Multicam edits where clips from different cameras have overlapping timecode
When a given multicam sequence is already loaded in the Source monitor, the Match Frame command does not auto-select the correct camera
Multicam project lost all multicamera source synchronization after re-recording cuts then save/reopen project
Sync by Audio
When syncing by audio fails, user receives no notification
If a track in the Timeline contains multiple copies of a source clip, then Synchronize by Audio can sync to wrong clip
Syncing by audio can move audio track items that are on the same track in the Timeline but not selected
When one of the selected track items is a nested sequence, Syncing by audio always moves other A/V clip.
Effects and Transitions
Color at edges of crisp mattes is inverted (GPU acceleration only)
Effects Panel: the Accelerated Effects badges are not displayed (Windows only)
Error in the way dissolves are rendered with Composite in Linear Color is enabled
Three-Way Color Corrector does not handle Levels correctly in GPU playback mode
Clipping occurs with some color correction plugins at values greater that 1
Insert Sequence as Clips: If a sequence contains a layered PSD, App crashes upon inserting it into another sequence as clips [KEM roll]
Metadata: Crash during metadata refresh
Markers
On tabbing with an uncommitted edit in the Markers panel, the Text Edit Control sometimes loses focus
When playhead is on a clip marker, Clear Current Marker can instead delete a sequence marker
Closed Captions
Quicktime exports with embedded captions can have frame size problems when viewed in QT player 7 and Premiere
if the project contains captions, project file size grows with each save.
Creative Cloud: CC Authentication is not remembered in some cases.

Mark Mapes wrote:
I think it's safe to be a little more specific in the case of the CC authentication bug: the fix was specific to manually syncing settings from Premiere Pro.
Mark, I was going to start a new thread about this but since you brought up sync settings here, I'll ask...
I just had my assistant editor finally download PPro CC since it's more ready now and I had her sync settings with my uploaded settings. It worked great. The only issue was that my computer is a 27" iMac and her's is a 15" macbook pro so when she started a new project all the windows of her new imported workspace were WAY too huge going way off her smaller screen. Is that normal? Is there a quick fix to that to make it quickly "fit" her screen? It's not the end of the world as it took just a few minutes to drag the windows around to fit, but just curious.
Thanks for the bug list btw!

DW CS5 "Get" bug in expanded site files view

Hi,
I just installed the CS5 Design Premium trial and have been playing with Dreamweaver. Just wondering if anyone else is experiencing the following issue...
When in expanded site files view (showing both local and remote), selecting a file on the REMOTE site and trying to "Get" the file does not download the remote file. It instead tries to retrieve the remote copy of the file(s) selected in the LOCAL file list pane.
If no file is selected on the local file list, pressing "Get" after selecting a REMOTE file from the list brings up the "Are you sure you wish to get the entire site" dialog.
Steps to reproduce:
1. Open expanded site files view (local and remote)
2. Click on a file in the remote file list. For testing purposes, click on a file in the LOCAL list first, then select a remote file
3. Click the Get button or right click on the remote file and choose Get.
DW should download the selected REMOTE file if that was the last selected file prior to executing the Get command. (this is the action that DW CS3/CS4 does)
I have submitted this bug in the official Adobe bug reporting system, but I'm curious as to whether others can reproduce this bug.
Thanks

@Murray, I think I have discovered exactly where the bug lies and how you may be able to reproduce it yourself...
@quantumlight - do you happen to have your Site Files panel UNDOCKED and in its own floating panel??
I work with Dreamweaver on a dual/multi monitor setup. I have my split design/code view on one screen, and the site files and code inspector on a DETACHED Files panel on the 2nd monitor.
I did a full DW prefences reset and everything went back to the factory setting, with the Files panel docked to the right hand side of the DW program window. With it docked, I opened the expanded/split site files view and IT WORKED NORMALLY as is expected.
However, as soon as I UNDOCKED the Files panel into its own floating panel and expanded the file view, the bug appeared and selecting a REMOTE FILE and pressing Get, asked to either download a copy of the selected LOCAL file, or if no local file is selected it asks "Are you sure you want to get the entire site"
Redocking the Files panel back to its original position makes the bug disappear.
I have tested this on two Windows 7 machines and one Mac Snow Leopard machine, both with the CS5 11.0.2 updates installed.
It seems it's a Windows version only bug as both Win7 machines produced the bug, with the Mac machine NOT presenting the bug in either docked or floating panel state.
Hopefully the Adobe DW guys see this soon and can work on fixing this bug in the next update.
Do you think i should re-submit my previous bug report with this updated discovery?

Solaris 9 x86 bug report - el_GR.ISO8859-7 & CDE

I'm posting this article here, because I can't find any official Solaris 9 x86 bug report page. I hope the developers will notice it. I'm using Solaris 9 x86 (12/02), with the latest 9_x86_Recommended patch cluster installed, and support for Greek installed too.
It seems there is some kind of problem, when trying to view text files with Greek (el_GR.ISO8859-7) characters, which were created under Windows. To be more specific:
If I boot at CDE with language el_GR.ISO8859-7, and try to view a .txt file (just with a simple double click), which I have created under Windows, with Greek characters,
the screen goes black, and the CDE login screen appears again (restarts). If I keep the Greek language or change the language to US English, I can boot at CDE again, with
no problems. If I try "command line logging", the screen goes off - just like when the computer is powered off, and I can't do anything, (well, except pressing the reset button, that's the sure way). And if I use the "init 6" command, while being logged at CDE, from a terminal, the Graphical Desktop exits, and then, the screen goes off again (just like the computer is powered off), but finally the computer manages to restart.
I'm using the Sun X server, NOT the XFree86 porting kit and I use the entry
:0 Local local_uid@console nobody /usr/openwin/bin/Xsun :0 -dpsfileops
in /usr/dt/config/Xservers file, to start the X server.
Here is the $HOME_DIR/.dt/startlog file:
--- ??? 23 ??? 2003 12:10:51
--- /usr/dt/bin/Xsession starting...
--- starting /usr/openwin/bin/speckeysd
--- Xsession started by dtlogin
--- starting /usr/dt/bin/dtsession_res -load -system
--- sourcing /root/.dtprofile...
--- sourcing /usr/dt/config/Xsession.d/0010.dtpaths...
--- sourcing /usr/dt/config/Xsession.d/0015.sun.env...
--- sourcing /usr/dt/config/Xsession.d/0020.dtims...
--- sourcing /usr/dt/config/Xsession.d/0030.dttmpdir...
--- sourcing /usr/dt/config/Xsession.d/0040.xmbind...
--- sourcing /usr/dt/config/Xsession.d/1000.solregis...
--- could not read /root/.profile
--- starting /usr/dt/bin/dthello &
--- starting /usr/dt/bin/dtsearchpath
--- starting /usr/dt/bin/dtappgather &
--- starting /usr/dt/bin/dsdm &
--- session log file is /root/.dt/sessionlogs/www_DISPLAY=:0
--- DTSOURCEPROFILE is 'true' (see /root/.dtprofile)
--- execing /usr/dt/bin/dtsession with a /sbin/sh login shell ...
--- starting desktop on /dev/pts/3
Sun Microsystems Inc. SunOS 5.9 Generic_112234-03 November 2002
/usr/dt/bin/ttsession[337]: starting
X connection to :0.0 broken (explicit kill or server shutdown).
X connection to :0.0 broken (explicit kill or server shutdown).
I don't know if this is a bug or something, and I'm very curious about the cause. I didn't have much time for any other "experiments".
Anyway, I hope this will help developers solve a problem -if it really exists-.
Angelos Vasilopoulos
Site Security Officer
[email protected]

I'm posting this article here, because I can't find any official Solaris 9 x86 bug report page. I hope the developers will notice it. I'm using Solaris 9 x86 (12/02), with the latest 9_x86_Recommended patch cluster installed, and support for Greek installed too.
It seems there is some kind of problem, when trying to view text files with Greek (el_GR.ISO8859-7) characters, which were created under Windows. To be more specific:
If I boot at CDE with language el_GR.ISO8859-7, and try to view a .txt file (just with a simple double click), which I have created under Windows, with Greek characters,
the screen goes black, and the CDE login screen appears again (restarts). If I keep the Greek language or change the language to US English, I can boot at CDE again, with
no problems. If I try "command line logging", the screen goes off - just like when the computer is powered off, and I can't do anything, (well, except pressing the reset button, that's the sure way). And if I use the "init 6" command, while being logged at CDE, from a terminal, the Graphical Desktop exits, and then, the screen goes off again (just like the computer is powered off), but finally the computer manages to restart.
I'm using the Sun X server, NOT the XFree86 porting kit and I use the entry
:0 Local local_uid@console nobody /usr/openwin/bin/Xsun :0 -dpsfileops
in /usr/dt/config/Xservers file, to start the X server.
Here is the $HOME_DIR/.dt/startlog file:
--- ??? 23 ??? 2003 12:10:51
--- /usr/dt/bin/Xsession starting...
--- starting /usr/openwin/bin/speckeysd
--- Xsession started by dtlogin
--- starting /usr/dt/bin/dtsession_res -load -system
--- sourcing /root/.dtprofile...
--- sourcing /usr/dt/config/Xsession.d/0010.dtpaths...
--- sourcing /usr/dt/config/Xsession.d/0015.sun.env...
--- sourcing /usr/dt/config/Xsession.d/0020.dtims...
--- sourcing /usr/dt/config/Xsession.d/0030.dttmpdir...
--- sourcing /usr/dt/config/Xsession.d/0040.xmbind...
--- sourcing /usr/dt/config/Xsession.d/1000.solregis...
--- could not read /root/.profile
--- starting /usr/dt/bin/dthello &
--- starting /usr/dt/bin/dtsearchpath
--- starting /usr/dt/bin/dtappgather &
--- starting /usr/dt/bin/dsdm &
--- session log file is /root/.dt/sessionlogs/www_DISPLAY=:0
--- DTSOURCEPROFILE is 'true' (see /root/.dtprofile)
--- execing /usr/dt/bin/dtsession with a /sbin/sh login shell ...
--- starting desktop on /dev/pts/3
Sun Microsystems Inc. SunOS 5.9 Generic_112234-03 November 2002
/usr/dt/bin/ttsession[337]: starting
X connection to :0.0 broken (explicit kill or server shutdown).
X connection to :0.0 broken (explicit kill or server shutdown).
I don't know if this is a bug or something, and I'm very curious about the cause. I didn't have much time for any other "experiments".
Anyway, I hope this will help developers solve a problem -if it really exists-.
Angelos Vasilopoulos
Site Security Officer
[email protected]

Bug - multiple related instances of same class

We've discovered a rather subtle bug in the process by which Kodo
searches for reachable related objects to persist. If an instance of a
PC class (A) has two relationships to the same PC class (B), and both
related instances of B have the same value for their PK-field, then only
one of the related instances of B will be persisted.
Obviously, this problem only occurs in the context of application
identity. We've only encountered it when all the instances involved are
newly created and being made persistent for the first time (else the
instances would have different PK-values). It should also be noted that
we're assigning PK-values in jdoPreStore(). Here's the specific
situation we encountered:
Class A has two relationships to class B, represented by fields "B b1"
and "B b2". In our case, A.b1 is the many-side of a bidirectional
one-to-many relationship; the one-side is implemented by a field "List
aList" in B. A.b2 is the navigable side of a unidirectional
relationship; there is no corresponding field in B. (We haven't checked
whether or how the cardinality or navigability of the relationships
affects the problem.)
Let "a1" be the sole instance of A. If a1.b1 is set to an instance of B
but a1.b2 is null, and makePersistent( a1 ) is called, then a1 and b1
are persisted correctly and the relation field b2_id in TableA is NULL.
However, if a1.b2 is set to a second instance of B and both instances of
B have the same initial value of their PK-field, then a.b2 is not
persisted. Only one record is added to TableB; it corresponds to A.b1.
Interestingly, in this case the relation field b2_id in TableA is not
NULL, but has the default value of b2's PK-field. jdoPreStore() is not
called on b2 and b2 is not persisted, but its PK-field is read in the
process of persisting a1.
Since we've placed the jdoPreStore() callback in a common non-persistent
adapter superclass, we're currently able to work around the problem with
a static "seed" PK value that is incremented in the superclass default
constructor to provide a unique initial value for each PK-field. If
anyone would like the code for this approach we'll post it, although
it'll become unnecessary when the problem is fixed.
Jerry Pulley
Sr. Developer
Commerce Technologies, Inc.

I'm curious what behavior, besides throwing an exception, could even be
possible. If the pm discovers two object with the same id, it seems that it
has to choose one of them to make persistent. How could it possibly resolve
differences in the fields of the two instances in deciding which one is the
correct one to put in the db? Additionally, allowing this behavior could
lead to subtle, difficult to detect bugs in your program, since ( as Abe
points out ) JDO promises that there will only be one instance of an object
with a given primary key per PM. Other code may make decisions based on
this expectation ( like refreshing one of the objects after making a change
in a different PM ), that would lead to problems for code still hanging on
to the second instance.
IMHO, it should throw an exception.
-Eric
"Abe White" <[email protected]> wrote in message
news:[email protected]...
Thanks for the bug report! However, I'm not entirely sure that this is a
bug (at least not the bug you think it is); either way it's an extremely
interesting case. The reason I say it might not be a bug is thatassigning
pk values in jdoPreStore seems suspect.
We know that a single PM cannot at any time contain multiple instances
with the same oid value, app id or otherwise. This is obvious from the
getObjectById method -- only one object can have a particular oid.
We also know that jdoPreStore is called only for instances managed by a
PM (duh!).
Thus it should not be possible to see a case where jdoPreStore is
called for 2 objects with the same initial oid.
Now, I realize that when you're dealing with persistence-by-reachability
things become less clear. However, I think the general point stands: at
the time that the objects are made persistent they all must have unique
oid values, and objects must be made persistent before jdoPreStore is
called.
Technically we could get around this. The current
persistence-by-reachability algorithm is something like:
flushed = {}
while flushed.size < persistent.size:
for each persistent instance:
if instance not in flushed:
instance.jdoPreStore // may persist more instances
instance.persistFirstClassFields // may persist more too
flushed += instance
In sum this is a breadth-first method of persisting relations. It could
be changed to a depth-first system instead of persisting all first class
fields each one is persisted and then immediately the algorithm is
repeated for that object before the other fields are touched. However,
this seems like it might lead to other unexpected behavior.
Generally, it just seems like waiting till jdoPreStore to assign the oid
of an object seems like a bad idea. I think the real bug is that Kodo is
not throwing an exception as soon as 2 object with the same oid are
detected (currently it just lets one overwrite the other in the cache,
which results in the behavior you see).
Does anyone else have an opinion on this? I'm certainly not fixed on my
interpretation of things; if you disagree I'd be very interested in
hearing other arguments.

Month View Bug in Desktop by Access

When I try browsing prior months in my palm desktop using month view, palm desktop crashes when I try to go back further than June, 2008; however, if I try to access periods prior to June using day or week view, I can view them without a problem. My Centro does not seem to be affected either, and I've run Pimlico software to try to identify any bugs, but I can't locate any. Since I don't use month view very often, I can't tell when this bug first emerged. I installed a backup Datebook file (that was a couple of days old), but that didn't fix the problem. Any advice would be much appreciated.
Post relates to: Centro (Verizon)

WinXP. Centro (verizon). USB synch.
Same problem Feb 08 crashes. Checked spanning midnight, long fields etc. Nothing helps.
Then, synch was hanging up in Calendar. Pushed cancel on Centro & HotSynch to no avail. Respectively, pulled out battery, used Win task manager.
To correct synch problem, overwrote Centro from desktop. After I did this, was curious, and tried to do the reverse. Got hung up again.
Then got free version of DbFixit. Told me I have a Datebook problem on 12/31/69 -- Centro calendar only goes back to 1/1/70! Care to explain?
DbFixit: "Calendar DB-PDat: Last blob not aligned with end of record. Rec=26. Date = 12/31/69"
Threw in towel & purchased the DbFixit version that self corrects. I'll let you know if it helps or not.
Regards
PS To Centro Marketing: Not being able to print out a monthly calendar is, for me and probably many others, a real negative.
Post relates to: Centro (Verizon)

Windows 8.1 wifi not working after sleep (and other various bugs)

Hello Apple support forum, this is my first post!
Alright, so I just switched to my first mac. MBP Retina late '13. I bought it primarily to run windows, and to also of course use OS10.
My issues in bootcamp however are getting annoying. My Wifi shows up as connected after I resume from sleep, but my mac won't let me disable wifi, enable airplane mode and then re-enable wifi, nothing. The only way to get wifi to work when resuming from sleep is to reboot.
I just set hibernate when close lid on all my power modes, and basically disabled sleep for now. Hibernate works fine for now, but sleep is much faster from resume and also I'm not sure if the machine will wake up from a simple tap on the keyboard or opening of the lid, I think I have to actually boot it all over again anyways.
My other minor but still annoying issue is my titles of windows in windows are showing up as black (screenshot here)
the only other thing I was curious about was the dual-gpu functionality. I know from reading these forums it's probably not possible because of the hardware and software mesh apple created for OSX and their dual-gpu design, how it wouldn't really work in windows. I'm just wondering if anyone ever got this to work in windows maybe on the older retina MBP or older macs, or if anyone is making progress on trying to fix that in windows? I bought this laptop expecting that to work, even the geniuses at the Apple store said it would be possible, I was misled and might have second-gussed buying a 3k machine if it would only get a few more hours battery than my old Vaio. I bought this machine primarily for battery life.
I'm just remembering another tiny tiny issue. When I plug headphones in the headphone jack in windows, it doesn't automatically switch to that audio output, I have to manually do it in audio settings, is this a bug, have I configured something incorrectly, and is there a fix?
One other thing is my dpi settings, I have it set to a larger font and everything because at stock it is SOOO tiny. my question is, is there any way to smooth out text in other apps, my browser and apps like rdio look like crap unless I leave the dpi settings stock, which I basically need a magnifying glass to use (I tried that for a week lol. Not the magnifying glass tho haha)
I know I'm rambling at this point, but in the windows 8.1 camera app, sometimes my camera does this bug where it flips between inverted and normal, extremely quickly, so it looks like there are two of me. I don't know if this was GPU drivers tho, because just reinstalled those this morning and it seems to be ok so far.
also, the keyboard. I miss my context menu key, what do I need two command keys for? A right alt button, I'd rather have that be the other control button. Any way to remap these easily? what about switching Fn with control on the left, I prefer my windows button in the exact corner.
last question tho, I saw people overclocking gpu's on their retinas from last year, can you do this on the new retinas, and can you overclock the cpu as well as the gpu?
I do have to say this in the end, I am a little dissapointed with apple, I was told thst my mac would run windows like a native windows machine. I know windows 8.1 is not supported, but coming from PC's for years, and being a PC technician, I also go to school for computer engineering, I expected everything to "just work" as steve jobs once said. Well, it doesn't just work. I even had these issues in windows 8, which is supported.
Installing windows 8 was a nightmare. I had to use the forums, try for weeks to get windows 8 to finally instll the proper (uefi) way, and to get everything usable, I had to reinstall my os's twice.
Apple, if you are going to advertise a mac that can run windows "seamlessly", you need to get these major issues fixed, support all new versions of windows before they are even release, and release proper hardware drivers and support software before new hardware is released. All other Windows OEMS are pretty much required to do this to stay in business. I don't dislike OSX, I just use windows for everything I can't use Mac for, so please fix this. You're better than this, you should put a higher standard on this. otherwise, don't advertise macs that can run windows.
Thanks guys, sorry for the information overload. BTW, MBP Retina 15" 16GB RAM 512 SSD, 2.6 haswell, pretty much the max specs other than the SSD.

I have stated every issue I’ve had so far in a fairly clear and concise way. I think if you read what I wrote, it all makes logical sense as to what is going on. Windows 7/8 would work just as well on a Mac if it was supported the same way the OS is for other OEMs.
As I stated earlier in the post, I’m having these same issues in windows 8, not just 8.1, which is the reason for the post. I know the difference between supported by drivers and not supported by the manufacturer. The fact that when Haswell mbp’s came out and no revision to bootcamp for the new hardware was released to fix issues with installing windows on the new hardware shows Apple clearly Is not supporting bootcamp as strongly as they advertise.
I am being realistic on Apple having drivers early. Anyone with an MSDN subscription can download the RELEASE version of windows months ahead of the actual release, I’m 100% sure if any average consumer can do that by paying $100 and saying they are a developer, apple can do it just as easily.
You aren’t much help, you haven’t answered really anything to my post, nor have you contributed any knowledge that wasn’t clearly posted above, so don’t say anything if you don’t have anything to contribute.
By the way, my rant is directed at apple, as you can see because I am saying “Apple, if you are going to…” because this is an Apple forum on Apple’s website. It is not directed to end users, clearly.

BPEL Server bug?

Hi all,
I experienced a curious problem using the test Console of BPEL Server 10.1.2. I created a process where, besides other activities, there are 2 receives (the first has createInstance="yes") with correlationSet, on the same partnerLink, portType, operation, and using the same BPEL variable. These 2 receives are in a sequence (not in concurrence). The problem is that when I send the second message on the second receive through the BPEL Console, the Server initiates a new instance of the same process. I went over the BPEL Specification and I think this should be possible according to that document.
Note, if I try the same think with 2 non ititial receives (without createInstance="yes") it works properly. Even with 2 invokes on the same partnerLink, portType and operation (not in concurrence).
I suppose this is a bug of the BPEL Server.
Could you check please?
Thanks a lot

While if I use, for the 2nd receive, another 'operation', declared into the same portType, it works properly. I think maybe the BPEL Server maps every process with the operation name used by the first receive activity, in order to create process instances.
Thanks

10.2.0.3 bug, curious

Similar Messages

Maybe you are looking for