10.2.0.4 - 11.2 - dbua - fatal - db using asm as storage,... but it isn't

I'm upgrading my 10.2.0.4 to 11.2.0.1 on RHEL5.4.
I start up the 11.2 dbua, and select the database to upgrade, then dbua pops up a box that says:
"The database is using ASM as storage. Before you upgrade the database, you need to upgrade ASM using Automatic Storage Configuration Assistant (ASMCA) from grid infrastructure home. Starting 11gR2, ASM should be running from grid infrastructure home"
The problem is.... I am not running ASM.
Any reasons why dbua is complaining about this, and how I can get past it?
Thanks in advance.
Stuart.

trace.log shows dbua thinking ASM is installed. I'll update this when Oracle Support come back to me...
Thread-14] 2010-01-28 13:51:34.608 NZDT ] CompManager.doPreMigrationChecks:2596] Logging Dir at this point :=/u04/app/oracle/cfgtoollogs/dbua/TRAIN/upgrade3
Thread-14] 2010-01-28 13:51:34.612 NZDT ] CompManager.doPreMigrationChecks:2605] ++++++++++ASM Checks Start++++++++++
Thread-14] 2010-01-28 13:51:34.612 NZDT ] CompManager.isModeSet:9243] DB Upgrade Mode Setting := 1
Thread-14] 2010-01-28 13:51:34.613 NZDT ] CompManager.isModeSet:9244] Mode := 1 is set
Thread-14] 2010-01-28 13:51:34.613 NZDT ] SQLEngine.reInitialize:730] Reinitializing SQLEngine...
Thread-14] 2010-01-28 13:51:34.613 NZDT ] OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: 10.2.0.4.0
Thread-14] 2010-01-28 13:51:34.614 NZDT ] OracleHome.getVersion:943] Current Version From Inventory: 10.2.0.4.0
Thread-14] 2010-01-28 13:51:34.614 NZDT ] OracleHome.getVersion:948] using sqlplus: /u04/app/oracle/product/10.2.0/db_1/bin/sqlplus
Thread-14] 2010-01-28 13:51:34.614 NZDT ] OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: 10.2.0.4.0
Thread-14] 2010-01-28 13:51:34.615 NZDT ] OracleHome.getVersion:943] Current Version From Inventory: 10.2.0.4.0
Thread-14] 2010-01-28 13:51:34.615 NZDT ] OracleHome.getVersion:948] using sqlplus: /u04/app/oracle/product/10.2.0/db_1/bin/sqlplus
Thread-14] 2010-01-28 13:51:34.615 NZDT ] OracleHome.getVersion:877] OracleHome.getVersion called. Current Version: 10.2.0.4.0
Thread-14] 2010-01-28 13:51:34.616 NZDT ] OracleHome.getVersion:943] Current Version From Inventory: 10.2.0.4.0
Thread-14] 2010-01-28 13:51:34.616 NZDT ] OracleHome.getVersion:948] using sqlplus: /u04/app/oracle/product/10.2.0/db_1/bin/sqlplus
Thread-14] 2010-01-28 13:51:34.616 NZDT ] SQLPlusEngine.getCmmdParams:222] m_home 10.2.0.4.0
Thread-14] 2010-01-28 13:51:34.616 NZDT ] SQLPlusEngine.getCmmdParams:223] version > 112 false
Thread-14] 2010-01-28 13:51:34.617 NZDT ] SQLEngine.getEnvParams:547] Default NLS_LANG: AMERICAN_AMERICA.AL32UTF8
Thread-14] 2010-01-28 13:51:34.617 NZDT ] SQLEngine.getEnvParams:557] NLS_LANG: AMERICAN_AMERICA.AL32UTF8
Thread-14] 2010-01-28 13:51:34.618 NZDT ] SQLEngine.initialize:317] Execing SQLPLUS/SVRMGR process...
Thread-14] 2010-01-28 13:51:34.659 NZDT ] SQLEngine.initialize:354] m_bReaderStarted: false
Thread-14] 2010-01-28 13:51:34.660 NZDT ] SQLEngine.initialize:358] Starting Reader Thread...
Thread-14] 2010-01-28 13:51:34.666 NZDT ] SQLEngine.initialize:407] Waiting for m_bReaderStarted to be true
Thread-14] 2010-01-28 13:51:34.823 NZDT ] CompManager.asmUpgradeFeasible:9419] Databases uses ASM? :=true
Thread-14] 2010-01-28 13:51:34.835 NZDT ] HAUtils.getHASHome:583] Oracle home from system properties: /u04/app/oracle/product/11.2.0/dbhome_1
Thread-14] 2010-01-28 13:51:34.836 NZDT ] HAUtils.getCRSHome:540] Getting configured CRS/HAS home for Oracle home ( /u04/app/oracle/product/11.2.0/dbhome_1 ) ...
Thread-14] 2010-01-28 13:51:34.836 NZDT ] GETCRSHOMEUtil.<init>:76] Toolname: getcrshome --- Tool location: /u04/app/oracle/product/11.2.0/dbhome_1/srvm/adminTool dependencies: Ljava.lang.String;@1d6f122
Thread-14] 2010-01-28 13:51:34.837 NZDT ] NativeSystem.isCmdScv:471] isCmdScv: cmd=]
Thread-26] 2010-01-28 13:51:34.883 NZDT ] StreamReader.run:61] In StreamReader.run
Thread-25] 2010-01-28 13:51:34.885 NZDT ] StreamReader.run:61] In StreamReader.run
Thread-14] 2010-01-28 13:51:34.889 NZDT ] CmdToolUtil.doexecute:372] nativeSystem.runRemoteExecCmd failed. Command = /u04/app/oracle/product/11.2.0/dbhome_1/srvm/admin/getcrshome arguments = ] env = null
Thread-14] 2010-01-28 13:51:34.890 NZDT ] ASMUtils.initialize:184] Error initializing ASMUtils: PRCT-1011 : Failed to run "getcrshome"
PRCT-1011 : Failed to run "getcrshome"
at oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:423)
at oracle.sysman.assistants.util.hasi.HAUtils.getCRSHome(HAUtils.java:544)
at oracle.sysman.assistants.util.hasi.HAUtils.getHASHome(HAUtils.java:604)
at oracle.sysman.assistants.util.asm.ASMUtils.initialize(ASMUtils.java:157)
at oracle.sysman.assistants.util.asm.ASMUtils.getASMUtils(ASMUtils.java:137)
at oracle.sysman.assistants.dbma.backend.CompManager.asmUpgradeFeasible(CompManager.java:9424)
at oracle.sysman.assistants.dbma.backend.CompManager.doPreMigrationChecks(CompManager.java:2606)
at oracle.sysman.assistants.dbma.backend.CompManager.obtainDatabaseInformation(CompManager.java:3749)
at oracle.sysman.assistants.dbma.ui.DatabasesPage.doProcessing(DatabasesPage.java:792)
at oracle.sysman.assistants.util.WaitDialog.run(WaitDialog.java:187)
at java.lang.Thread.run(Thread.java:595)
Caused by: PRCT-1011 : Failed to run "getcrshome"
at oracle.cluster.cmdtools.CmdToolUtil.doexecute(CmdToolUtil.java:376)
at oracle.cluster.cmdtools.CmdToolUtil.execute(CmdToolUtil.java:324)
at oracle.cluster.cmdtools.GETCRSHOMEUtil.getCRS_HOME(GETCRSHOMEUtil.java:122)
at oracle.cluster.cmdtools.GETCRSHOMEUtil.getCRS_HOME(GETCRSHOMEUtil.java:100)
at oracle.cluster.deployment.ClusterwareInfo.getConfiguredCRSHome(ClusterwareInfo.java:420)
... 10 more
Thread-14] 2010-01-28 13:51:34.892 NZDT ] ASMUtils.validateASMInstance:237] clusterware/siha home not found
Thread-14] 2010-01-28 13:51:34.893 NZDT ] CompManager.asmUpgradeFeasible:9431] validateASM exception Grid Infrastructure or Clusterware home not found. ASM should be running under this home.
AWT-EventQueue-0] 2010-01-28 13:51:59.113 NZDT ] SQLEngine.done:2148] Done called
Edited by: stuartu on Jan 29, 2010 9:37 AM
Edited by: stuartu on Jan 29, 2010 9:45 AM

Similar Messages

Fatal errors using JavaFX ChoiceBox, Tooltip, Popup in Eclipse (RCP) View

I'm using JavaFX within an Eclipse RCP application. Any JavaFX popup (ChoiceBox, Tooltip, etc..) within an eclipse view causes a fatal exception to occur when clicking on the popup. The popups do appear, but clicking on them causes the fatal error.
I created a standalone JavaFX application to confirm that the Popups work fine in that environment. They do.
I also created a standalone SWT-based application (outside of an RCP) that embeds the FXCanvas within an SWT shell and the problem doesn't occur there either.
But when the Combo is contained in an FXCanvas within and RCP view, the fatal exception occurs.
Has anybody else seen this behavior?
I tried it with JavaFX 2.0.2, 2.1 b17, 2.1 b19 (all 32bit)
I'm using JRE 6.0_30-b12 (32bit) on Windows 7 (64bit)
My RCP target platform is based on eclipse 3.6 (galileo).
Thanks!

The problem is described in http://javafx-jira.kenai.com/browse/RT-20883. e(fx)clipse 0.0.14 (http://tomsondev.bestsolution.at/2012/05/29/efxclipse-0-0-14-released/) which I've just released fixes the problem. Unfortunately it does not work with 3.6 because I'm using OSGi API only available > 3.7.0

Fatal error using C++ native library

Hi everyone,
I'm currently developing a JNI native library in C++ in order to use an original library from a third vendor. I'm trying to perform a very simple operation, just calling a concrete method from the original library from a Java sample application.
The same test in C++ is working fine, so I assume the vendor library is working correctly. But if I perform exactly the same code from within my native library using JNI, it give a crash like this:
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x000000371c880580, pid=17095, tid=1077307712
# JRE version: 6.0_27-b07
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.2-b06 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# C [libc.so.6+0x80580] wchar_t+0x0
I think this is telling me that there was an error in the native library, more concrete in the libc.so library which is part of the GNU C++ compiler used to generate the native library. I don't know what the "wchar_t" wants to mean, since I know that is a primitive type for wide chars. It might be that the error is related to the use of this primitive within the vendor library?
The compilation options that I'm using are the following:
#CCFLAGS = -shared -Wl,-soname,${TARGET} -lstdc++ -ldl -lpthread -fopenmp
CCFLAGS = -shared -Wl,-soname,${TARGET} -ldl -fopenmp
#FPFLAGS = -DLINUX -DGX_NAMESPACES -fPIC -fshort-wchar
#FPFLAGS = -fPIC -fshort-wchar
FPFLAGS = -fPIC
${TARGET} : FPEnginePulnixImpl.o
${CC} -o ${TARGET} FPEnginePulnixImpl.o ${CCFLAGS} -L${JAI_DIR} -lVrs
FPEnginePulnixImpl.o :
${CC} -o FPEnginePulnixImpl.o -I"${JDK_INCLUDES}" -I"${JDK_INCLUDES_LINUX}" -I"../jni/include" -I"${JAI_INCLUDES}" ${FPFLAGS} -c ../src/main/C++/FPEnginePulnixImpl.cc
I played around with those ones, without success so far. I debugged the native code and I know the crash is coming when I call a constructor of a C++ class of the vendor library. Is there something I could do about this? BTW, on Windows is working fine, but indeed, the vendor library is a different one. I've got the impression that there's something in the JNI wrapper of the JDK6 that I'm using that makes the vendor library to crash, either that or something wrong with the compilation of my native library.
Any help will be welcome.
Thanks and regards,
Luis

Most often errors are caused by
1. Pointer errors
2. Api misuse, such as using something in the wrong order (which actually leads to a pointer problem but it not really the cause.)
Keep in mind that the fact that code runs 'ok' on one system is NOT a safe indicator that the above problems do not exist.
If it is not that then if the binaries have incompatible build properties then that can cause problems.

Localconfig is not found out in the new grid Oracle_HOME

Hi There,
Ifollowed the metalink Note ID 736121.1 to upgrad ASM for Non-RAC from 10gr2 to 11gr2. The 11gr2 Grid installation is successful, which is on a different directory from the current ASM directory. What I did for insallation is software only installation. However, when I'm doing step 4 in the Note, localconfig is not found out in the now Grid home directory(/ora/fs0000/app/grid/11.2.0/bin). even no DBUA is found out either. I'm unable to upgrade ASM for non-RAC from 10r2 to 11gr2.
With the successful installation of 11rr2 grid, the CSS is running in 11gr2, but No DBUA is found out in the new Grid Oracle_HOME directory.
$ ps -ef | grep d.bin | grep -v grep
oracle 7751 1 0 Sep 17 ? 40:56 /ora/fs0000/app/grid/11.2.0/bin/ocssd.bin
oracle 7618 1 0 Sep 17 ? 27:32 /ora/fs0000/app/grid/11.2.0/bin/ohasd.bin reboot
$ ls -ltr /ora/fs0000/app/grid/11.2.0/bin/local*
/ora/fs0000/app/grid/11.2.0/bin/local*: No such file or directory
$ ls -ltr /ora/fs0000/app/grid/11.2.0/bin/db*
-rwxr-x--- 1 oracle dba 13790 Jan 1 2000 /ora/fs0000/app/grid/11.2.0/bin/dbstart
-rwxr-x--- 1 oracle dba 6074 Jan 1 2000 /ora/fs0000/app/grid/11.2.0/bin/dbshut
-rwxr-xr-x 1 oracle dba 2426 Jan 1 2000 /ora/fs0000/app/grid/11.2.0/bin/dbhome
-rw-r--r-- 1 oracle dba 5297 Oct 3 2006 /ora/fs0000/app/grid/11.2.0/bin/dbgeu_run_action.pl
-rwxr-x--- 1 oracle dba 666264 Nov 2 2009 /ora/fs0000/app/grid/11.2.0/bin/dbfs_client
-rwxr-x--- 1 oracle dba 0 Nov 3 2009 /ora/fs0000/app/grid/11.2.0/bin/dbvO
-rwxr-x--- 1 oracle dba 0 Nov 3 2009 /ora/fs0000/app/grid/11.2.0/bin/dbfsizeO
-rwxr-x--x 1 oracle dba 554200 Sep 17 16:00 /ora/fs0000/app/grid/11.2.0/bin/dbv
-rwxr-x--x 1 oracle dba 11680 Sep 17 16:00 /ora/fs0000/app/grid/11.2.0/bin/dbfsize
Here are the steps in Note 736121.1:
1) Install the new 11g ASM Oracle Home (on a different directory) as described in the Installation Guide associated with your specific platform :
http://www.oracle.com/pls/db111/portal.portal_db?selected=11&frame=
==)> Installation Guide for <your platform/Os>
2) Shutdown all the database instances that are using ASM as storage option.
3) Shutdown the ASM instance.
4) Reconfigure the CSS service:
Connect as root OS user and execute:
$ORACLE_HOME/bin/localconfig reset
Where: $ORACLE_HOME is the new 11g ASM Oracle Home
5) Startup the ASM instance (connected as Oracle OS user) as usual (using the 10g Oracle Home).
6) From another graphical session, set the environment variables (ORACLE_HOME, PATH, etc.) pointing to your new 11 ASM Oracle Home.
7) Then execute the DBUA from the new ASM 11gOracle_Home/bin/dbua:
DBUA will show 2 options:
=)> upgrade ASM instance.
=)> upgrade the database
8) Select [upgrade ASM instance] option. The DBUA will upgrade your ASM instance to release 11g automatically.
9) Finally, please startup the databases that are using ASM as storage option.
Does anyone has experience upgrading 10g ASM for Non-RAC to 11gR2?
Thanks in advance.
Edited by: user618594 on 20-Sep-2010 4:17 PM

strangely, i seem to have left out the word "bought" to the first sentence.
"I have bought the album Fading West by Switchfoot..."

Failed to back up the data. A fatal error has occured and the application is being terminated.

hi,
I am working on a content development using captivate 5.5. all of sudden I am not able slide view I am not able to view the text captions in slide view but i am able to see the text caption in Filmstrip. and when I am selecting another side it throwing below error and application ends.
Adobe Captivate
A fatal error has occured and the application is being terminated. Adobe Captivate has tried to save all your work in the respective project folders as ".cpbackup" files.
Please restart Adobe Captivate.
OK
I have a deliverable by this weekend if some can help to resolve this issue will be appreciated.
Note: when first time it crashed, I re-created the course again from scratch and its crashed again. I have multiple attempt to finish this course but no luck.
Please help me out to deliver my work.
Thanks
CD

We have the exact same problem.Renaming the backup file per this post http://forums.adobe.com/message/4055726 didn't work. I can open the file and see the text boxes even though they're now showing as empty. Is there any way to recover the file?
Yes, we were using a network drive but now we've switched to locally stored content.

Ld.so.1 problem - fatal: relocation error - "referenced symbol not found"

Hi, I've been trying to compile and run my application non Solaris using CC (detils below) but haven't got luck with running the application because of a linker error :
ld.so.1: java: fatal: relocation error: file ./libtest.so: symbol __1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___J__nullref_: referenced symbol not found
Here's what I'm trying to do :
I'm compieing one library to include another shared library whcih uses the "string" class (STL). The compilation of both the libraries proceeds perfectly fine. However, when i preload this library with LD_PRELOAD and run a JAVA application (which will have calls to some function in the preloaded library), the get the above linker error.
Here's what all I have tries to get thsi wroking : ( I understand that this error is due to a missing library that CC has not linked to and i've no idea what the library is!!!)
1.> # LD_LIBRARY_PATH=/usr/lib:$LD_LIBRARY_PATH
# export LD_LIBRARY_PATH - NO LUCK :-(
2.> linked to /opt/SUNWspro/lib/libCrun.so (found this from another forum on the net), but NO LUCK :-(
3.> export LD_DEBUG=bindings
export LD_DEBUG_OUTPUT=/home/log.txt (so that all sysmbols refered are logged!!!)
i did a grep on the log for the symbol but NO LUCK!!! :-(
Please can you help me with this? What is the library that is to be linked too, or is there something else?
Details About my system, compiler and compilation options :
1.> uname -a output : SunOS sh1sol9 5.9 Generic_117171-12 sun4u sparc SUNW,Sun-Fire-280R Solaris
2.> CC version : Sun WorkShop 6 update 2 C++ 5.3
3.> Compilation flags i've used to build the library :
FIRST LIBRARY : CC -G -xcode=pic32 -I../common/ -ldl ../common/logger.cpp helper_functions.cpp BCPEntries.cpp BCP_class.cpp -o libBCP.so
SECOND LIBRARY : CC -G -xcode=pic32 -I../common/ test_BCP_construct.cpp -lBCP -L. -o libtest.so
Please help me out of this,
Any and every help (or even a hint to it) will be appreciated!!!
Thanks in advance,
Madhur Kumar Tanwani

Refer to the C++ Users Guide that comes with the compiler, the chapter on Building Libraries, which explains these points in more detail.
When you build a C++ shared library, you must explicitly list all the libraries that it depends on. Unlike building an executable, the CC -G command does not by default create dependencies on system libraries. Although not explained well in the Guide, you should be sure you get the shared (.so) versions of all libraries, not the static (.a) versions.
All C++ programs require at least libCrun and libc. Programs that use the C++ Standard library (using anything in the std namespace, like std::string) also need to link to the appropriate version of the library.
The default library is libCstd. If you compile using the optional STLport library, you need the libstlport instead. You cannot use both libCstd and libstlport in the same program.
In your case, the build command would look something like this, assuming you are using the default libCstd:
CC -G -o mylib.so ..... -library=Cstd,Crun -lc
Be sure that any preceeding -Bstaic option is followed by -Bdynamic before listing these system libraries.
To verify you have picked up the dynamic libraries, run the command
ldd mylib.so
to see a list of dependencies. If you don't see the following in the list
/usr/lib/libCstd
/usr/lib/libCrun
/usr/lib/libc (or /lib/libc)
something is wrong.
A note about LD_LIBRARY_PATH: don't use it.
Ideally, the environment variable should never be set. If you must set it to reach vendor-supplied libraries, never put the system directories /lib or /usr/lib on the path, and never put the compiler installation directory, like /opt/SUNWspro/... on the path. You can wind up forcing the runtime loader to seach directories in the wrong order and pick up inappropriate versions of libraries.
For more on LD_LIBRARY_PATH, read this note in Rod Evans' blog. He's the Sun linker expert. The material here is available in the manuals, but his blog has a nice summary.
http://blogs.sun.com/roller/page/rie/?anchor=tt_ld_library_path_tt

Fatal error XML-0121 in a valid XML file in v2 of SAX parser

Attachments: "1|type=text/plain|desc=Logging of Fatal error using v2 of SAX parser |file=v2_loggin
.txt|";"2|type=text/plain|desc=Logging of Fatal error using v2 of java SAX parser |17078|file=v2_l
gging.txt|"
Dear XML team,
I am using the SAX parser version 2.0.2.4. When parsing a valid
XML of approx. 3,5 Megabytes i get a fatal error XML-0121
saying 'End tag does not match start tag
<CORRESPONDENTIENAAM1>...'
We checked the xml on the well formedness with tools like XML
Spy and IE5. The XML is valid!
We did some testing on the XML with the SAXSample class and we
noticed that the error is related to the use of Entity
References. When we removed the Entity Reference ' the XML
was parsed correctly.
We also noticed that if we cut the XML in two smaller parts it
was also parsed correctly.
I attached the output of the parser, as well as the output of
the SAXSample class.
I hope you can fix this problem!
With kind regards,
Rolf van Deursen.
null

Update: I have attempted to use xmlparserv2.jar dated 12/23/08 that is packaged with jDeveloper 11g preview, but am still receiving the same message.

Fatal Syntax Errors Unique to XCode Compile

I am attempting to bring a Unix library into an XCode project for iPad and compile it. This Unix library compiles for i386 without any problems when I use gcc from Terminal, which is v4.2. However, when I attempt to compile those same sources from within the XCode project, I receive hundreds of fatal syntax errors, even though I it is still compiling to i386, and it is still using GCC 4.2. Here is an example declaration where it gives an error:
The Code:
int memcmp(const void *, const void *, size_t);
The error:
Expected declaration specifiers or '...' before '(' token
I must admit I am just now reading my introduction to Objective-C, so it is possible that there is a syntax error there according to some strict guidelines. The above code is actually C, but I did not worry about this because I was not expecting to extensively modify this library.
How is the XCode compile so different from using Apple's built-in GCC 4.2 that I receive hundreds of fatal syntax errors from within XCode, but it compiles with only a few warnings from the command line?

kienjakenobi wrote:
At the moment, I am having difficulty compiling libpng. libpng does not appear to like Apple's custom stdio.h header file.
What errors are you getting? I'm pretty sure I've build this library before, although not for iOS. Building for iOS shouldn't be much different than any cross-platform build, such as when building 32-bit on a 64-bit machine.
I tried it myself and couldn't get the configure script to do it all. Those things never work when you need them to. I had to hack up the Makefile and libtool file. Here is a patch file:
diff -crB libpng-1.2.44/Makefile libpng-1.2.44.iOS/Makefile
* libpng-1.2.44/Makefile 2010-10-14 14:57:16.000000000 -0400
--- libpng-1.2.44.iOS/Makefile 2010-10-14 14:50:06.000000000 -0400
* 171,180 **
AUTOHEADER = ${SHELL} /Users/jdaniel/Downloads/libpng-1.2.44/missing --run autoheader
AUTOMAKE = ${SHELL} /Users/jdaniel/Downloads/libpng-1.2.44/missing --run automake-1.11
AWK = awk
! CC = gcc
CCDEPMODE = depmode=gcc3
! CFLAGS = -g -O2
! CPP = gcc -E
CPPFLAGS =
CYGPATH_W = echo
DEFS = -DHAVECONFIGH
--- 171,180 ----
AUTOHEADER = ${SHELL} /Users/jdaniel/Downloads/libpng-1.2.44/missing --run autoheader
AUTOMAKE = ${SHELL} /Users/jdaniel/Downloads/libpng-1.2.44/missing --run automake-1.11
AWK = awk
! CC = /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc
CCDEPMODE = depmode=gcc3
! CFLAGS = -g -O2 -isysroot /Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.2.sdk -arch armv7
! CPP = /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/cpp -E
CPPFLAGS =
CYGPATH_W = echo
DEFS = -DHAVECONFIGH
* 194,200 **
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALLSTRIPPROGRAM = $(install_sh) -c -s
! LD = /usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld
LDFLAGS =
LIBOBJS =
LIBPNG_DEFINES = -DPNGCONFIGURELIBPNG
--- 194,200 ----
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALLSTRIPPROGRAM = $(install_sh) -c -s
! LD = /Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ld
LDFLAGS =
LIBOBJS =
LIBPNG_DEFINES = -DPNGCONFIGURELIBPNG
diff -crB libpng-1.2.44/config.log libpng-1.2.44.iOS/config.log
* libpng-1.2.44/config.log 2010-10-14 14:57:16.000000000 -0400
--- libpng-1.2.44.iOS/config.log 2010-10-14 14:48:08.000000000 -0400
* 30,37 **
Processor type: i486 (Intel 80486)
Processors active: 0 1
Primary memory available: 4.00 gigabytes
! Default processor set: 90 tasks, 370 threads, 2 processors
! Load average: 0.28, Mach factor: 1.71
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
--- 30,37 ----
Processor type: i486 (Intel 80486)
Processors active: 0 1
Primary memory available: 4.00 gigabytes
! Default processor set: 90 tasks, 374 threads, 2 processors
! Load average: 0.38, Mach factor: 1.60
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
diff -crB libpng-1.2.44/libtool libpng-1.2.44.iOS/libtool
* libpng-1.2.44/libtool 2010-10-14 14:57:16.000000000 -0400
--- libpng-1.2.44.iOS/libtool 2010-10-14 14:55:40.000000000 -0400
* 240,249 **
hardcodeintolibs=no
# Compile-time system search path for libraries.
! syslib_search_path_spec="/usr/lib/gcc/i686-apple-darwin10/4.2.1/x8664 /usr/lib/i686-apple-darwin10/4.2.1 /usr/lib /usr/local/lib"
# Run-time system search path for libraries.
! syslib_dlsearch_pathspec="/usr/local/lib /lib /usr/lib"
# Whether dlopen is supported.
dlopen_support=unknown
--- 240,249 ----
hardcodeintolibs=no
# Compile-time system search path for libraries.
! syslib_search_pathspec="/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.2.sdk/usr/lib"
# Run-time system search path for libraries.
! syslib_dlsearch_pathspec="/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.2.sdk/usr/lib"
# Whether dlopen is supported.
dlopen_support=unknown
* 260,272 **
# The linker used to build libraries.
! LD="/usr/libexec/gcc/i686-apple-darwin10/4.2.1/ld"
# Commands used to build an old-style archive.
oldarchivecmds="$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib"
# A language specific compiler.
! CC="gcc"
# Is the compiler the GNU compiler?
with_gcc=yes
--- 260,272 ----
# The linker used to build libraries.
! LD="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/ld"
# Commands used to build an old-style archive.
oldarchivecmds="$AR $AR_FLAGS $oldlib$oldobjs~$RANLIB $oldlib"
# A language specific compiler.
! CC="/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/gcc"
# Is the compiler the GNU compiler?
with_gcc=yes
It seems to work:
file ./.libs/libpng12.0.dylib
./.libs/libpng12.0.dylib: Mach-O dynamically linked shared library arm
You don't need to create static libraries. Just use the "installnametool" to change the location of the dynamic libraries to @executable_path and include the required libraries inside your application bundle.

ORA-03106: fatal two-task communication protocol error

Hello everyone,
we have a problem with one of our table.
the problem occurs when i execute
SQL> select * from t;
select * from t
ERROR at line 1:
ORA-03106: fatal two-task communication protocol error
but i can access the data by giving the column names for the whole table.
also there is nothing wrong with the other tables in the schema.
many thanx in advance

first of all thanx in advance
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for IBM/AIX RISC System/6000: Version 10.2.0.1.0 - Productio
NLSRTL Version 10.2.0.1.0 - Production
SQL> select comp_id, version, status from dba_registry;
COMP_ID VERSION STATUS
CATALOG 10.2.0.1.0 VALID
CATPROC 10.2.0.1.0 VALID
OWM 10.2.0.1.0 VALID
JAVAVM 10.2.0.1.0 VALID
XML 10.2.0.1.0 VALID
CATJAVA 10.2.0.1.0 VALID
EXF 10.2.0.1.0 VALID
ODM 10.2.0.1.0 VALID
CONTEXT 10.2.0.1.0 VALID
XDB 10.2.0.1.0 VALID
RUL 10.2.0.1.0 VALID
COMP_ID VERSION STATUS
ORDIM 10.2.0.1.0 VALID
APS 10.2.0.1.0 VALID
XOQ 10.2.0.1.0 VALID
AMD 10.2.0.1.0 VALID
SDO 10.2.0.1.0 VALID
EM 10.2.0.1.0 VALID
but i cannot understand why..
as far as i know, nothing changed. but maybe the other admins:)
as i said i can query all colums in table t without using a *,
also i can use * when i include rowid in the query
select m.*,rowid from t m;
i am very confused now:S

10.2.0.4 upgrade - dbua FINISH button does not process

I am using dbua to upgrade database from 9.2.0.6 to 10.2.0.4
I have a problem at the last screen in the DBUA. ("Database Summary Screen").
+[skScheduler timer] [16:50:47:173] [CompManager.setUpForOperation:5623] isDierctory dir=/data/MORADEV2/moradev2db/9.2.0/admin/MORADEV3_msoradb82/bdump+
+[TaskScheduler timer] [16:50:47:174] [CompManager.setUpForOperation:5623] isDierctory dir=/data/MORADEV2/moradev2db/9.2.0/admin/MORADEV3_msoradb82/cdump+
+[TaskScheduler timer] [16:50:47:174] [CompManager.setUpForOperation:5623] isDierctory dir=/data/MORADEV2/moradev2db/9.2.0/admin/MORADEV3_msoradb82/udump+
+[TaskScheduler timer] [16:50:47:174] [CompManager.setUpForOperation:5623] isDierctory dir=/data/MORADEV3/admin/MORADEV3/dpdump+
+[TaskScheduler timer] [16:50:47:174] [CompManager.setUpForOperation:5707] Creating Summary log file+
+[TaskScheduler timer] [16:50:47:178] [CompManager.setUpForOperation:5748] Everything OK in setUpForOperation+
+[Thread-27] [16:50:47:212] [StepContext$ModeRunner.run:2478] ---- Progress Needed:=true+
+[AWT-EventQueue-0] [16:51:7:37] [SQLEngine.done:1958] Done called+
+AWT-EventQueue-0] [16:51:7:37] [SQLEngine.done:1958] Done called+
I hit the FINISH button, it just does not progress to the upgrade.
I am on Linux x86 - RHEL 5.5

If you have problems with the DBUA and you cannot properly run it, instead of using the GUI approach you may
consider the MANUAL upgrade with the scripts!
The DBUA calls the same scripts you have to run with the manual method but in a more Next-Next Wizard.
For me DBUA is a great tool for Windows, but with Linux-Unix i prefer the Manual upgrade with the scripts
For example
http://www.runningoracle.com/product_info.php?products_id=354

X-Fi Xtreme Gamer Fatality and external deco

Hello. I have problems with my X-Fi Xtreme Gamer Fatality. I connect the sound car to a external Denon decoder?with a RCA Coxial cable. I listen the sounds of computer, but i don?t have dolby or dts sound. In DVD sound in DOLBY ok using Power DVD for example. But, in HD avis for example with AC3, the decoder don?t detect the 5. sound. Looking in Creative online Help I view thar the Creative Console have a option of Dolby and DTS where i can put the mode passthrough to use a external decode, but in my creative consolo this option don?t appear. I probe to uninstall and install again the drivers but don?t work. What happen? How I can resolve??p.d: Sorry for my english, but I don?t speak english. THANKS?EDIT: I have Windows XP SP2Message Edited by tusqui on -05-200702:52 AM

Sorry to hear of your problem, the same thing happened to me when I made the mistake of downloading a "new" driver from the Microsoft Update Website. It was not the proper driver for our soundcard and changed registry settings that shut off the S/PDIF output.
The Problem--this model soundcard does not use hardware to process Dolby Digital or DTS. That is why you are getting Dolby Digital and DTS when you use Cyberlink DVD, the Cyberlink program is decoding it using software.
The Solution--My Digital (S/PDIF) out to external processor worked fine until the Microsoft Update incident.
I shall presume that your problems are also driver related. I tried going back to a restore point...no good.
I tried erasing all remnants of the soundcard driver, and reinstalling from the original CD ROM...no good.
I then entered the registry, and using the search function found all entries which contained the letters S/PDIF, I then looked for those that were shut off (0) and switched them on (). Unfortunately I did all of them at once, so I do not know for sure which ones need to be turned on. However, the good news is then the external processor showed it was receiving raw Dolby Digital and DTS signals.
My Advice--Try going back to a restore point first, if unsuccessful, follow by the deletion of all Soundblaster drivers and reload using your original Soundblaster CD ROM, lastly, if nothing else worked, and you know your way around the registry, use my solution. Important Note--If you are not familiar with the registry--DO NOT MONKEY WITH IT. You could cause much greater problems than you already have.
However, as with all things regarding computers, what worked for me may not work for you. If your sound card never outputted raw Dolby Digital and DTS signals, than perhaps it is a hardware defect. In my case, everything worked until that dog gone Microsoft put that (new) driver out. I will never again use any hardware drivers posted on Microsoft Update. I might suggest going back and reading through the older post on this website, this problem came up right after the Microsoft incident, it was unfortunate that I did not see the post before performing the destructi've download. I hope this information helps in some way.
Good Luck!

Fatal Error:Out Of Memory

Hello
I have problem in JDev 10.1.3.3.0
My Project is using BC4J framework ,and while running my application in debug mode i have got the Fatal Error:Out of Memory.
But when i start my application in normal Run mode its running fine..
can any one help me out...
Thanks..

when i had done some googling i found the bug list of Jdev 10.1.3.3.0 i found this.. but wht to do with this ?..
http://www.oracle.com/technology/products/jdev/htdocs/10.1.3.4/10134fixlist.html
Category Bug Number Base Bug Title
BC4J DT 6262615 5854143 MIGRATION OF A 9.0.5.2-.10.1.3.1. PROJECT HANGS/ THROWS OUTOFMEMORY ERROR

Upgrade with DBUA to 12c hangs while upgrade.xml does not generated

Hi together,
actually I've an upgrade problem with dbua. At a server with Oracle Linux 6 I've running an 121.0.2 GI. in that GI there are two Oracle Homes: one 12.1.0.2 wih PSU1 and one 11.2.0.4 with PSU4. I'm trying to upgrade the database "testdb" from 11.2.0.4 to 12.1.0.2 with dbua.
So I'm logged in and set all session parameters to the new 12.1.0.2 home:
$ export ORACLE_HOME=/usr/local/oracle/product/12.1.0.2/
$ export PATH=$ORACLE_HOME/bin:$PATH
After that I start the dbua. i select my testdb and wait. And still wait..... After selecting the db and dbua has getting al the database information he will hang at 0% by "Run Pre Upgrade Utility". But why?
So I've looked into trace.log from dbua:
oracle@testserver- DB_12_1_0_2:/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
$ ll
total 96
-rw-r----- 1 ora121 oinstall    1374   Oct 17 10:56 mapfile.txt
-rw-r----- 1 ora121 oinstall      104   Oct 17 10:56 preupgdir.sql
-rw-r----- 1 ora121 oinstall 29326    Oct 17 10:56 sqls.log
-rw-r----- 1 ora121 oinstall 53994    Oct 17 10:56 trace.log
-rw-r----- 1 ora121 oinstall         0    Oct 17 10:56 trace.log.lck
ora121@QUM169 - DB_12_1_0_2:/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
$ less trace.log
In the trace.log he tells me, that he weren't able to create a file called upgrade.xml and throws a java exception:
[Thread-77] [ 2014-10-17 10:56:28.200 CEST ] [PreUpgradeToolGroup.validate:252] validateConnectionToDB using user:=null
[Thread-77] [ 2014-10-17 10:56:28.233 CEST ] [PreUpgradeToolGroup.validate:268] create log dir obj for pre upgrade tool
[Thread-77] [ 2014-10-17 10:56:28.234 CEST ] [PreUpgradeToolGroup.validate:274] creating dir object for pre upgrade spool at/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2
[Thread-77] [ 2014-10-17 10:56:28.239 CEST ] [PreUpgradeToolGroup.validate:320] Executing CREATE OR REPLACE DIRECTORY PREUPG_OUTPUT_DIR AS '/usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2' using SQLEngine.
[Thread-77] [ 2014-10-17 10:56:28.244 CEST ] [PreUpgradeToolGroup.validate:362] validationLogDir =
[Thread-77] [ 2014-10-17 10:56:28.244 CEST ] [PreUpgradeToolGroup.validate:376] Preupgrade Utility used= /usr/local/oracle/product/12.1.0.2/rdbms/admin/preupgrd.sql
[Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [PreUpgradeToolGroup.validate:462] Executed Pre Upgrade Script successfully, now load MEP............
[Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [DbuxUtils.writeRootElementForUpgradeXML:509] Passed in upgrade xml file /usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2/upgrade.xml does not exist.
[Thread-77] [ 2014-10-17 10:56:29.742 CEST ] [PreUpgradeToolGroup.validate:479] Executing preupgrade tool
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:480] Spool file /usr/local/oracle/cfgtoollogs/dbua/testdb/upgrade2/upgrade.xml
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [DbuxUtils.getPreUpgradeLoader:236] upgrade.xml does not generated
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:487] Executing Preupgrade tool failed..Upgrade xml does not exist
[Thread-77] [ 2014-10-17 10:56:29.743 CEST ] [PreUpgradeToolGroup.validate:491] upgrade.xml does not generated
[Thread-77] [ 2014-10-17 10:56:29.745 CEST ] [SQLEngine.done:2278] Done called
Exception in thread "Thread-77"
java.lang.NullPointerException
        at oracle.sysman.assistants.dbma.wizard.view.ValidationPage.prepareMaps(ValidationPage.java:1989)
        at oracle.sysman.assistants.dbma.wizard.view.ValidationPage.check(ValidationPage.java:1651)
        at oracle.sysman.assistants.dbma.wizard.view.ValidationPage$Check.run(ValidationPage.java:2040)
        at java.lang.Thread.run(Thread.java:682)
But why? Does anybody know that error?
Thanks a lot for help and regards,
Dave

Yep they are! The own group they weren't in was the asmadmin group. Amusingly I had to add them both to the asmadmin group, so that the upgrade.xml was created with the oracle 12c user and group oinstal and not with oracle 11g user and group asmadmin. I can't tell you really, why, because it is a little bit confusing why he generate a file with the correct group when I add that group to the user, which was assigned wrong before to the file ?!?!

Fatal internal error in JRockit

Hi,
I have been using & testing JRockit 7.0(1.4.0) and its been working fine so far.
I am running it on Win2K platform.
But rarely (say once in 20 times) when I run my application using JRockit jvm,
I get the error below.
===================================================================
Fatal internal error in JRockit. Thread 480 died abruptly
java.lang.NullPointerException
java.lang.NullPointerException:
-------end of stacktrace ===================================================================
Has anyone seen this before? Any idea why its happening?
Rgds
Thiru

Hi David,
Thanks for your response.
No, I am not using any native code in my application. But in my
application boot-up, I am spawning lot of threads (around 25).
I am not sure if using -Xthinthreads would help (I am not using
it)...but anyways I feel even if -Xnativethreads(default) is
used this error should not occur.
I guessed that this could be related to memory issue and then I tried to reproduce
this issue with a simple program where I was spawning 5 threads, and in a while
loop just sleeping.
The sample program is as below.
import java.io.*;
public class Memtest {
public static void main(String args[]) throws Exception{
int count = Integer.parseInt(args[0]);
for (int i=0; i<count; i++) {
InnerThread t = new InnerThread();
t.start();
static class InnerThread extends Thread {
public void run() {
System.out.println("Thread started....");
try {
while(true) {
Thread.currentThread().sleep(2000);
}catch(Exception e){
I kept on running this program with different min/max memory
values. I was running lot of other processes on my system and my
system was very low on memory(even virtual).
I saw the below error when I ran my sample program (after trying
it for nearly 2 hrs). Here if you notice, it was not able to
start even a single thread (As the thread started message din't
appear)
D:\Thiru\javatest\jrockit>C:\JRockit\7.0\1.4.0\bin\java -Xms205m -Xmx205m Memtest
5
===========================================================
[JRockit]Out-of-memory condition? : waiting for an available
stack
[JRockit]Out-of-memory condition? : waiting for an available
stack
[JRockit]Out-of-memory condition? : waiting for an available
stack
Fatal internal error in JRockit. Thread 380 died abruptly
java.lang.NullPointerException
java.lang.NullPointerException:
-------end of stacktrace
===================================================================
And then another time, I saw this other error (attached file jvm-
crash-04-dec) while running the same program, but this time my
system had enough free memory. So, I am not sure if this is
anything related to memory also but definitely feel is a bug in
JRockit.
Hope this information helps.
Rgds
Thiru
David Simms <[email protected]> wrote:
Hi Thiru,
I can't say as we have seen this one before. Perhaps if we had more
information we could work on finding the cause and produce a fix and/or
workaround for you.
Do you have any idea as to where in your code the problem is occuring
Does your application use native (JNI) code ?
If the problem seems completely random we could take a look at your
application.
Regards,
/David Simms
Thirumalesh C wrote:
Hi,
I have been using & testing JRockit 7.0(1.4.0) and its been workingfine so far.
I am running it on Win2K platform.
But rarely (say once in 20 times) when I run my application using JRockitjvm,
I get the error below.
===================================================================
Fatal internal error in JRockit. Thread 480 died abruptly
java.lang.NullPointerException
java.lang.NullPointerException:
-------end of stacktrace ===================================================================
Has anyone seen this before? Any idea why its happening?
Rgds
Thiru
[jvm-crash-04-dec.txt]

OK - sorry - STOP: c000021a Fatal System Error : Help me help my girlfriend!

Ok - you've probably seen this before. Basically, my girlfriend was working at her laptop whereupon it suddenly gave her this error. She doesn't know what she was doing immediately prior to this event, and now it gives her this message whenever she attempts to log on. It seems to happen literally just before the box pops up asking for her login info. I'm basically trying to retrieve her files for her. (or salvage the entire thing - although this appears increasingly unlikely!). Here is a list of what I have tried to do...
(This was originally intended as a letter for someone who is a lot better than me with computers, but the girlfriend forgot to drop the computer off last time she was in the city - we live in the sticks.)
@page
{size:21cm 29.7cm;margin:2cm;}
P
{margin-bottom:0.21cm;}
Computer gets fatal system error c000021a status of 0x00000000( 0x00000000, 0x00000000 )
Tried to load up through safe mode, etc, same blue screen.
Tried the restore cd but it said it was the wrong one for this particular machine. However, by validating with the restore cd I'm able to access the OS set up screen.
From here, I tried to do a windows repair. Repair seemed to complete successfully, but I still got the blue screen on boot.
I then tried going through the recovery console with the intention of copying her files to a memory stick before reformatting. It seems I needed to set a number of variables, (eg. allowallpaths and allow removable media). However, I was unable to use the 'set' command (eg. Set allowremovablemedia =TRUE) since set is disabled. It seems that the security policy needs to be changed, but that this can only be done through windows rather than the recovery console. You can change it through the registry if you can infact access and change registry values from the recovery console.
After this, I did a chkdsk /p which revealed some errors, which I repaired (chkdsk /r), but this still had no effect.
I also tried to do automated system recovery but it wanted the asr disk inserted into the a: which I don't think we have. I was expecting it to allow me to specify a drive to save a backup to (hence use a memory stick), but again, I think this might only be possible from within windows. --------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Other thing to note is she is running service pack 2 (she thinks). I know this is SP3 forum, but I was pointed in this direction!
ANy help would be much appreciated. I've been searching the web for about 3 days for a solution, and plus I can't seem to find anywhere helpful with the exact same error message.

Rfrf
that error code means Bug Check 0xC000021A: STATUS_SYSTEM_PROCESS_TERMINATED. A restore wont fix it but a clean instal from the OS CD'S would. Does she have the OS cd's? Does she have a backup? Can she boot into safe mode (F8??)?
Wanikiya and Dyami--Team Zigzag

10.2.0.4 - 11.2 - dbua - fatal - db using asm as storage,... but it isn't

Similar Messages

Maybe you are looking for