10.7.5 update broke my cd drive-how can this be fixed?

Before opting in for the 10.7.5 update, a CD was ripped to the hard drive with no problems.  The device remained in the same climate controlled environment during and after the update. 
Now, disks are making chugging noises inside of the unit and not being recognized before the automatic ejection takes place.
Any assistance is greatly appreciated

mechanical noises on a superdrive can NEVER be the result of software updates.
verify same with another disk.
Your superdrive loader or center spindle is damaged.
If youre inserting and its ejecting after several seconds its most likely just a dirty laser lens......Ive repaired several Superdrives.
ejects immediately = damaged loader
ejects after a little bit = dirty laser lens.
lucky for you a new Superdrive is only $40 if you replace it yourself.
otherwise, contact Apple for replacing your Panasonic Superdrive (the mfg. of the DVD drive in your macbook)

Similar Messages

  • PSE 10 installed on windows 7 desktop and recently updated on windows laptop.  now PSE doesn't work on either machine.  How can this be fixed?

    PSE 10 installed on windows 7 desktop and recently updated on windows laptop.  now PSE doesn't work on either machine.  How can this be fixed?

    uninstall pse 10 (properly using the adobe uninstaller).
    clean - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    then try reinstalling using the adobe installation file(s).
    if you see an activation count error while trying to reinstall contact adobe support, https://helpx.adobe.com/contact.html
    and ask for an activation count reset.

  • TS3274 My Ipad has a black background now and everything is color faded after the latest software update?  I restored and reset the Ipad.  How can this be fixed?

    My Ipad has a black background now and everything is color faded after the latest software update?  I restored and reset the Ipad.  How can this be fixed?

    How much data is being backed-up from each Mac?  (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
    Is there any other data on your Time Capsule, besides the backups?
    Most likely, there just isn't room.  Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't.  Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
    Also see #C4 in Time Machine - Troubleshooting for more details.

  • My ipad has been stuck on the apple log for almost 10 hrs after trying to update, how can this be fixed?

    my iPad has been stuck on the apple log for almost 10 hrs after trying to update to ios 8, how can this be fixed?

    Try reset iPad and continue with update.
    Hold the Sleep/Wake and Home button down together until you see the Apple Logo.
    Note: Data will not be affected.

  • My iPad has been stuck on the apple loge for almost 10 hrs after trying to update, how can this be fixed?

    my iPad has been stuck on the apple loge for almost 10 hrs after trying to update, how can this be fixed?

    You may have to restore your iPad using Recovery mode, but try a reset first. Hold down on the sleep and home buttons at the same time until the Apple logo appears on the screen. Let go of the buttons when you see the logo. This takes about 10-15 seconds.
    IF the update will not complete or you see the connect to iTunes message on the screen, you have to restore your iPad.
    If you can't update or restore your iOS device

  • After downloading the update ios6 my iPad is extremely slow how can this be fixed, After downloading the update iso6 my iPad is extremely slow how can this be fixed

    After downloading the update for my iPad 3rd gen my iPad is extremely slow. How can this be fixed???

    You may have to restore your iPad using Recovery mode, but try a reset first. Hold down on the sleep and home buttons at the same time until the Apple logo appears on the screen. Let go of the buttons when you see the logo. This takes about 10-15 seconds.
    IF the update will not complete or you see the connect to iTunes message on the screen, you have to restore your iPad.
    If you can't update or restore your iOS device

  • I updated to iOS 6.1.2 and my battery is dying at an accelerated rate, how can this be fixed? (iPhone 5)

    I updated to iOS 6.1.2 and my battery is dying at an accelerated rate, how can this be fixed? (iPhone 5)

    Put the phone into airplane mode for a little while and see if the battery still drains at the accelerated rate.   If so, there is some type of service/app that is draining your battery.
    First, try turning off all unused notifications.   That did the trick for me when I had this problem.

  • Updated to iOS 7.0.4. Now a restrictions passcode has been set, not by me.  How can this be fixed without resorting to factory restore?

    Updated to iOS 7.0.4. Now a restrictions passcode has been set, not by me.  How can this be fixed without resorting to factory restore?

    Hi Mullan13,
    Thanks for using Apple Support Communities.  Restoring your device is the solution for this issue, but if a backup was made you can also use that after the restore.  This article provides details on how to go about this:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    I realize it may not be the solution you were seeking but you should be back on track after performing these steps.
    Cheers,
    - Ari

  • When syncing after recent update, sync is stuck at "Step 4 of 4" "Waiting for changes to be applied" and will not complete, even after hours.  How can this be fixed?

    I completed the most recent software update for both iTunes and iPhone recently.  I am now trying to sync my iPhone to add newly purchased audiobooks and the sync remains stuck at "Step 4 of 4" with the message "Waiting for changes to be applied"  I have tried everything to correct this.  When sync is cancelled a failure to sync message is generated.  Any ideas????

    Alright, so I reset my computer and suddenly it then recovered. Other times it wouldn't recover after resetting the computer, so I have no idea how it happened. I just restarted the computer lots of time and finally it worked.
    Okay, back to square one. Now to transfer music, I tried my previous acknowledgable solutions but they didn't work. The iPod touch does not feature a hard-disk mode, and windows media player doesn't support iPods.
    I've tried multiple programs to transfer music but none of them work properly and keep giving me error codes. So my iPod still gets stuck at Step 4: Waiting for changes to be applied or whatever it said.
    Thanks in advance ._. (Please help)
    p.s - Apple is useless. If I don't get steady answers tomorrow I'm going to end up calling them and get this problem fixed first hand. Second hand? I don't know, over the **** phone.
    juiceb0xk signing out for the night. Bye. >:(

  • HT1386 I use Windows Vista.I moved my itunes library from the vista hard drive to data hard drive because of low memory remaining on vista. I can no longer sync my ipod to my library.how can this be fixed. Willy

    I use windows vista. I moved my itunes library fromvista to data hard drive. Very little available memory on vista. I cannot sync my ipod to library anymore.
    how can I fix this problem. Willy.

    Go to Settings>Preferences>Advanced and make sure that the location of your media library is correct.

  • Invalid key length on hard drive. Can this be fixed?

    Hello,
    I have a question about an error I am receiving with a hard drive I have been using for a few months on an imac G3 (the slot loading version). I bought this used 80 GIG hard drive on ebay for a friend of mine and I helped him transfer all his data from his older 9 GIG drive to this newer 80 GIG drive that I bought for him on ebay. I simply cloned the 9 GIG drive onto the new drive using Carbon Copy Cloner. There is not a lot of data on the drive - only about 3 GIGs of data.
    The drive is the only drive in the computer (an imac G3) and therefore it is the startup drive. The operating system on the drive is OS9. All was working fine for a few months until just last week. Now I am receiving this following error:
    error message:
    The disk "Macintosh HD" appears to be damaged. Use a disk repair utility to repair the disk.
    And so I used the disk utility built into OS9 to see if I could repair the problem. (I think OS9's disk utility is called "Disk First Aid")
    When using OS9s disk utility (I think it is called "Disk First Aid") the following report is issued:
    Problem: Invalid key length, 4,943
    Test done. Problems were found but Disk First Aid cannot repair them.
    My questions are:
    What is an "Invalid key length"?
    How serious is this?
    What would cause this?
    Could this have been caused by the physical condition of the disk or possibly by the software on the disk?
    Would re-formatting the drive fix it? (Of course I would try to save any data first onto another disk)
    Or is it risky to continue to use this disk even after reformatting it?
    I guess I have a lot of questions here and if anyone could make any suggestions or comment on why "Invalid key length" errors happen I would really appreciate it. Thanks:)
    Here are some details:
    When I bought the 80 GIG hard drive from ebay the first steps I took were to format the drive using OS9's "drive setup", load the OS9 drivers and then I verifed the disk. The disk seemed to be fine. Then I cloned his old drive onto this 80 GIG drive using Corbon Copy Cloner. I was sure the 80 GIG drive was in a healthy state at that time and I trusted it enough to give it to my friend for his startup drive. Now that the drive has failed with his data and programs, I feel pretty bad. How could this "Invalid key length" error occur?
    Should I go back to the person who sold me the drive on ebay and ask for a refund? Or are "Invalid key length" errors a common occurance with hard drives that should just be accepted? Or might it possibly be the contents (data) on my friend's disk that caused this error.
    It has been suggested to me to use "Tech Tools Pro" or "Disk Warrior" to repair the disk. Hopefully that might repair the disk. Unfortunately these programs are too expensive for this purpose because they would cost more than the computer actually costs (its an old imac G3 computer). I found a service that would run Disk Warrior on the disk to repair it for a $50 fee. Still, that is also not worth it as the computer may not even be worth $50.
    Here are some specifications:
    80 GIG drive specs: SEAGATE BARRACUDA 7200.7 80GB hard drive
    computer: imac G3 (slot loading version)
    OS: Mac OS9
    Thank you for any suggestions especially as to whether I should attempt to return the hard drive or look for a refund for this hard drive or attempt to reformat the drive and try again (backing up the data first).
    I also question the source of all the data on my friends computer. If he had the original operating system disks (which he said didn't come with his computer when he purchased it second-hand), I could have easily re-installed the OS and the applications. But he doesn't have any disks. That serves me right for having to deal with trying to help out someone who has software from a questionable source. I'm never doing that again. I guess that makes me guilty too as an accomplice. I don't feel very good about this
    I didn't know for sure - but I guess I should have assumed his software was illegal if he didn't have the disks - I was afraid to ask. I'm never putting myself in this possibly illegal situation again. Never again will I try to help someone out who doesn't clearly have the legal disks. Please forgive me and everyone else who reads this post. I feel shameful about this but somehow I must get myself out of this problem. I've learned a good lesson. Should I attempt to fix his computer? Or should I tell him to first buy a legal OS and software before I can help him out? You see I feel further guilt because I was the one who gave him the 80 GIG problematic hard drive that failed and I feel I should have to fix it. Can anyone offer me a bit of advice? What do I do?
    What's the right thing to do?

    Thank you Jim and Apple2Freak,
    I appreciate your comments. I am now suggesting to my friend to buy a legal OS and if that is the case I am suggesting to him to move to OSX instead of OS9. Luckily he let me know there wasn't much data on that drive that he needed to save. I am still trying to determine if I could still use this hard drive with the keylength errors if I erase it or if the hard drive has permanent damage. I am hoping that I could install OSX on it and erase the hard drive to start again.
    This imac (slot loading version) can support up to OS 10.3.9 however I might consider Xpostfacto to try to run 10.4. But then I would need to buy 10.3.9 as well as 10.4 and that would double my OS cost. I think I might just look for OS 10.3.9 only. Its not worth it for me to buy two OSes for it.
    Jim, your post was very interesting because it also pointed out that it could be an issue of bad RAM. A few months ago we installed some new second-hand RAM and I wonder if that is the cause of all these problems. I will have to check that first.
    Thanks again!

  • I get a download error in iTunes store for purchased items since update.  It will not download the items waiting.  How can this be fixed?

    Since latest update, I get a download error message for 25 songs that are waiting to download.  It says to "tap and try again" but still does not download.  How can I get them downloaded?  They are showing in my iTunes on PC but not on phone.

    The problem is with facebook, go to settings / facebook / your user name and delete your account, the do a hard reset (home+power for some seconds).
    dont need to delete the facebook app! just delete your integrate account from settings
    cheers!

  • Video started to sound awful when i've updated to iOS6, how can this be fix?

    Hi,
    Ever sine i've updated to iOS6 this October, the sound of my videos on my iPad started to sound awful. I'm using the default video player for iPad. It sounds like there's an echo, bass sounds has totally low quality and etc.
    I tried removing the videos(music video) on my iPad then resync it but it still sounds different from before. I've tested the sounds in my mp3 (same song) still sounds as expected. So my sound setting and my headset are not defective.
    Please teach me how can i fix this issue.
    Thanks

    What app are you using?
    Do you get sound from the YourTube app
    From other website?
    I suspect a problem with the specific site you are using, not an iPod problem. Can you post a link to that site?

  • Not able to down load software updates for months...How can this be corrected?

    I have an iMac and am running Mac OSX 10.8.6.  Have not been able to download software updates since May.  Have tried many times.  Receiving the following error message:  "The update could not be expanded, and may have been corrupted during downloading.  The update will be downloaded and checked again the next time that Software Update runs."  How can I correct this problem???

    Hi,
    Please refer to the below thread which could be helpful:
    DME file is not generated
    Regards,
    Kiron Kumar T.

  • When I try to email documents from my iPad 2 it appears to send but never shows up in my sent box or in the receiver's email account.  this has only been happening since the last update for my ipad.  How can this be corrected?

    Has anyone else had this problem?  When I "share" documents from Pages or GoodReader via email It looks and sounds like documents have been sent but they never arrive and when I check my "sent" file, they aren't there.  Very frustrating!  I know I've sent them this way before and it worked so wondering if it's something to do with the latest updates to 6.1.3

    Which email service provider are you using?  You can install DropBox and share links to the files that way.  When you snd to your self (cc or bcc) do the items show up?  What file types and sizes are these attachments?  Are you sending over WiFi or cellular connection?  Try using more than one email account from a different provider (Gmail, yahoo, iCloud, etc) and see if it is email provider specific.

Maybe you are looking for