10G RAC Database Configuration Querry??
Hi All,
I have installed the 10GR3 Grid and deployed the Agent to a system which has 10GR2 RAC Database with CRS installed.
1) When i try to configure the cluster database, should we use the VIP TNS entries as the Connect string or the Physical Node TNS Address.
2) After i have configured it i do not see Listener shown for either monitoring nor i am able to add manually.
3) Will any CRS components be monitored through Grid? For Me i dont find any though the CRS HOME oratab entry is enabled.
Please share your ideas and experience.. on this..
Regards,
Paravasu Dev
This is stated in the EM documentation. <br>
Oracle Database FAQs
</br>
Similar Messages
-
NIC ROUTER requirement for 10g RAC database
I need to know what hardware to order in setting up an 10g RAC database without a single-point-of-failure. My question centers on the networks. If each server has one NIC for the public interface and one NIC for the private interconnect, aren't the routers these NICs are attached to a single point of failure? If each server has two NICs bonded together for the public interface and two NICs bonded together for the private interconnect, does each NIC attach to a different router?
sayantan chakraborty wrote:
is RDMA and infiband ar same??Infiniband is a switched fabric layer for high speed communication. RDMA is a protocol for "+remote direct memory access+".
Infiniband supports the Internet Protocol suite over Infiniband, or IPoIB. It also supports RDMA over Infiniband.
so do we need only infiband SDR / QDR switch to set infiband OR what else??You need an Infiniband switch - Cisco and Voltaire are two companies that supply this type of hardware. The latter is used by Oracle in its Exadata database machines. Unsure about Cisco's commitment to Infiniband switches as they have discontinued their Infiniband switches with integrated fibre channel gateways. A sore point with us after we bought into this technology about 2 years ago, in part on their very own recommendations - and now own very expensive, somewhat buggy and totally unsupported hardware. Seems like the new Cisco California servers are GigE and not Infiniband, which perhaps explain this (flawed) decision of theirs...
For each cluster node, you need an Infiniband PCI card (typically has 2 ports). If you are going to use bonding, you will need a pair of Infiniband cables per server. Also remember to get spares - both PCI cards and cables.
If you want redundancy at the switch, you need to get yourself 2 Infiniband switches.
But if you're planning to invest this into a RAC cluster, then surely you should also invest money in RAC licensing and support - and with that gain access to very useful documentation like the RAC Starter Kit and so on. -
How to start Oracle 10g RAC database and clusterware?
I have steps to stop the 10g RAC Database and clusterware but not sure about starting it.
I have heard executing
$crsctl stop crs --as root
on each node
will start the database,asm,nodeapps .Is that true?
or we have to do that step by step like we do in stopping the clusterware and database below
1.Stop the agent:
cd to $AGENT_HOME/corpng04.amhc.amhealthways.net/bin, then run: ./emctl stop agent
2.Stop the full database
$ oracle_home/bin/srvctl stop database -d db_name
3.Stop the ASM Instances on node1,node2
$ oracle_home/bin/srvctl stop asm -n node -- I guess you can't give multiple nodes in one command with comma,you need to give this multiple times with diff node name
4.Stop the NodeApps :vip,listener,oms and gsd
$ oracle_home/bin/srvctl stop nodeapps -n node -- I guess you can't give multiple nodes in one command with comma,you need to give this multiple times with diff node name
5.Stop the CRS cluster processes :those bloody 3 evmd,ocssd,crsd
$su - root
$CRS_home/bin/crsctl stop crsPaul R @ NL wrote:
before is shutting down crs i tend to stop the instances and services via srvctl then stop crs via crsctl
just the way i do it. not saying it's the right way but it is the one i am comfortable with.Good -) If we stop CRS, but forgot shutdown oracle instances ... we'll see shutdown abort in alert log file(that mean instances are shutdowned abort).
We should shutdown instance before stop CRS anyway. -
Migration of 10g RAC database to new sever which includes 11g upgrade
Hello all,
I have requirement here to migrate 10g RAC database from one server to another server as part of migration i want to perform upgrade to 11g as well.
To Help me out.Please post your inputs or way to perform the task.
Precautions to be taken while doing the activity.
Please find the below for more info
Old Box:
Current environment
RAC -2node
ASM
Database Version 10.2.02
Os:HP-UX 11.21
New Box:
New environment should be
RAC -2node
ASM
Database Version 11.2
Os:HP-UX 11.31
Thanks for the help in advance
AnandPl do not post duplicate threads - Migration of 10g RAC database to new sever which includes 11g upgrade
-
Oracle 10g RAC Database Migration from SAN to New SAN.
Hi All,
Our client has implemented a Two Node Oracle 10g R2 RAC on HP-UX v2. The Database is on ASM and on HP EVA 4000 SAN. The database size in around 1.2 TB.
Now the requirement is to migrate the Database and Clusterware files to a New SAN (EVA 6400).
SAN to SAN migration can't be done as the customer didn't get license for such storage migration.
My immediate suggestion was to connect the New SAN and present the LUNs and add the Disks from New SAN and wait for rebalance to complete. Then drop the Old Disks which are on Old SAN. Exact Steps To Migrate ASM Diskgroups To Another SAN Without Downtime. (Doc ID 837308.1).
Clients wants us to suggest alternate solutions as they are worried that presenting LUNs from Old SAN and New SAN at the same time may give some issues and also if re-balance fails then it may affect the database. Also they are not able to estimate the time to re-balance a 1.2 TB database across Disks from 2 different SAN. Downtime window is ony 48 hours.
One wild suggestion was to:
1. Connect the New SAN.
2. Create New Diskgroups on New SAN from Oracle RAC env.
3. Backup the Production database and restore on the same Oracle RAC servers but on New Diskgroups.
4. Start the database from new Diskgroup location by updating the spfile/pfile
5. Make sure everything is fine then drop the current Diskgroups from Old SAN.
Will the above idea work in Production env? I think there is a lot of risks in doing the above.
Customer does not have Oracle RAC on Test env so there isn't any chance of trying out any method.
Any suggestion is appreciated.
Rgds,
Thiru.user1983888 wrote:
Hi All,
Our client has implemented a Two Node Oracle 10g R2 RAC on HP-UX v2. The Database is on ASM and on HP EVA 4000 SAN. The database size in around 1.2 TB.
Now the requirement is to migrate the Database and Clusterware files to a New SAN (EVA 6400).
SAN to SAN migration can't be done as the customer didn't get license for such storage migration.
My immediate suggestion was to connect the New SAN and present the LUNs and add the Disks from New SAN and wait for rebalance to complete. Then drop the Old Disks which are on Old SAN. Exact Steps To Migrate ASM Diskgroups To Another SAN Without Downtime. (Doc ID 837308.1).
Clients wants us to suggest alternate solutions as they are worried that presenting LUNs from Old SAN and New SAN at the same time may give some issues and also if re-balance fails then it may affect the database. Also they are not able to estimate the time to re-balance a 1.2 TB database across Disks from 2 different SAN. Downtime window is ony 48 hours.Adding and removing LUNs online is one of the great features of ASM. The Rebalance will be perfomed under SAN. No downtime!!!
If your customer is not entrusting on ASM. So Oracle Support can answer all doubt.
Any concern .. Contat Oracle Support to guide you in the best way to perform this work.
>
One wild suggestion was to:
1. Connect the New SAN.
2. Create New Diskgroups on New SAN from Oracle RAC env.
3. Backup the Production database and restore on the same Oracle RAC servers but on New Diskgroups.
4. Start the database from new Diskgroup location by updating the spfile/pfile
5. Make sure everything is fine then drop the current Diskgroups from Old SAN.
ASM Supports many Terabytes, if you need to migrate 3 Database with 20TB each using this way described above would be very laborious .. .. So add and remove Luns online is one feature that must work.
Take the approval from Oracle support and do this work using the ASM Rebalance.
Regards,
Levi Pereira -
ORA-04030 On ORACLE 10g RAC database with two nodes as active
OS-HP-AIX 5L(5.3)----IBM
DATABASE-10.2.0.2(10G)
I am getting error "ORA-04030" while executing a query
I have already set the ulimits for oracle account to UNLIMITED
1)STACK----UNLIMITED(BOTH SOFT/HARD LIMITs)
2)DATA----UNLIMITED(BOTH SOFT/HARD LIMITs)
3)MEMORY----UNLIMITED(BOTH SOFT/HARD LIMITs)
4)TIME----UNLIMITED(BOTH SOFT/HARD LIMITs)
step 1:-When I skip the listener then query executes very fine.But when
i go through the listener the "ORA-04030" errors come.
step 2:-Then when i stop and start listener on both the nodes the all
the query works fine.
This thing happens every time the system reboots
Can anyone tell me the solution for this
and why this thing happensThanks for ur immediate response
ORA-04030: out of process memory when trying to allocate 127000 bytes (QERHJ
hash-joi,kllcqas:kllsltba)
ORA-04030: out of process memory when trying to allocate 66184 bytes (pga
heap,kco buffer)
ORA-04030: out of process memory when trying to allocate 127000 bytes (QERHJ
hash-joi,kllcqas:kllsltba)
sql qurry
SELECT
WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID PTY_ID,
PTY_TYP_CDE, PTY_ROL_TYP_CDE, SOC_CDE2 SOC_CDE,
DECODE(SOC_CDE2,'10','Y',NULL,'N',
NVL(( SELECT NVL(AFL_IND, 'N') FROM pty y WHERE y. IPI_BAS_NR = SOC_CDE2 AND NVL(DEL_FL,'N') = 'N'
AND ROWNUM < 2 ),'N')) AFL_IND,
pDate,
ENTMT_ID, ROL_TYP_CDE, IP_STA_IND_CDE, UNID_ID_FST_NA,
UNID_IP_NA, IP_PAY_STA, REASON, SHR_OWN_PTY_NA_ID,
PGM_STT_DT, PAY DIRIND,
ACTV_OWN_SHR, ACTV_COPY_SHR, CLM_OWN_SHR, CLM_COPY_SHR,
FNC_PTY_RESIGNED_ON_DIS_DT ( PTY_ID,
TO_DATE( DECODE(PTY_TYP_CDE,'WRTMB',
'2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-10'),'YYYY-MM-DD')) TF
FROM
SELECT WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID PTY_ID,
PTY_TYP_CDE, PTY_ROL_TYP_CDE, NVL(SOC_CDE2,'0') SOC_CDE2,
DECODE(PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-10') pDATE,
ENTMT_ID, ROL_TYP_CDE, IP_STA_IND_CDE, UNID_ID_FST_NA,
UNID_IP_NA, IP_PAY_STA, REASON, SHR_OWN_PTY_NA_ID,
PGM_STT_DT, PAY_DIR_IND,
SUM(NVL(ACTV_OWN_SHR,0)) ACTV_OWN_SHR,
SUM(NVL(ACTV_COPY_SHR,0)) ACTV_COPY_SHR,
NVL( SUM(NVL(CLM_OWN_SHR,0)),0) CLM_OWN_SHR,
NVL(SUM(NVL(CLM_COPY_SHR,0)),0) CLM_COPY_SHR
FROM
SELECT B.WRK_PERF_ID, B.WRK_ID, B.PTY_NA_ID,
D.PTY_ID , D.PTY_TYP_CDE, D.PTY_ROL_TYP_CDE,
CASE
WHEN D.PTY_ROL_TYP_CDE ='W' OR D.PTY_ROL_TYP_CDE ='P'
THEN
SELECT MIN(soc_cde)
FROM MBRSH_AGR_TER A
WHERE A.pty_id = D.PTY_ID
AND A.STT_DT <= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-
05-10' , '2004-03-10' ),'YYYY-MM-DD')
AND ( A.END_DT >= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-1
0' ),'YYYY-MM-DD') OR A.END_DT IS NULL)
AND A.INCL_EXCL_IND = 'I'
AND ( A.TIS_CDE = 840 OR
EXISTS (
SELECT 1
FROM CPST_TERR C
WHERE C.CHILD_TIS_CDE = 840
AND C.PARENT_TIS_CDE = A.TIS_CDE
AND NVL(C.DEL_FL, 'N') = 'N'
AND NVL(A.DEL_FL,'N') = 'N'
AND soc_cde NOT IN
SELECT soc_cde
FROM MBRSH_AGR_TER B
WHERE B.pty_id = D.PTY_ID
-- b.soc_cde = a.soc_cde
AND B.STT_DT <= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-0
5-10' , '2004-03-10' ),'YYYY-MM-DD')
AND (B.END_DT >= TO_DATE( DECODE(D.PTY_TYP_CDE,'WRTMB', '2004-04-10' ,'AFMBR', '2004-05-10' , '2004-03-10'
),'YYYY-MM-DD') OR B.END_DT IS NULL)
AND B.INCL_EXCL_IND = 'E'
AND NVL(B.DEL_FL,'N') = 'N'
AND ( B.TIS_CDE = 840 OR
EXISTS ( SELECT 1
FROM CPST_TERR D2
WHERE D2.CHILD_TIS_CDE = 840
AND D2.PARENT_TIS_CDE = B.TIS_CDE
AND NVL(D2.DEL_FL, 'N') = 'N'
)-- NOT IN
) --w,p end
WHEN D.PTY_TYP_CDE='SOC' THEN D.IPI_BAS_NR
END
) SOC_CDE2,
B.ENTMT_ID, B.ROL_TYP_CDE,
B.IP_STA_IND_CDE, B.UNID_ID_FST_NA, B.UNID_IP_NA, B.IP_PAY_STA, B.REASON, B.SHR_OWN_PTY_NA_ID,
A.PGM_STT_DT, D.PAY_DIR_IND,
ACTV_OWN_SHR, ACTV_COPY_SHR, CLM_OWN_SHR, CLM_COPY_SHR
FROM STG_ACIP_DIST_MODE1 B, STAGING_USAGE_SELECTION_MODE1 A, PTY_NA C, PTY D
WHERE B.WRK_PERF_ID = A.WRK_PERF_ID
AND B.PTY_NA_ID = C.PTY_NA_ID
AND C.PTY_ID = D.PTY_ID
AND A.CALC_RUN_CTL_ID = 279
AND A.DIS_ID = 241
GROUP BY WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID, PTY_TYP_CDE, PTY_ROL_TYP_CDE,
SOC_CDE2, ENTMT_ID, ROL_TYP_CDE, IP_STA_IND_CDE, UNID_ID_FST_NA,
UNID_IP_NA, IP_PAY_STA, REASON, SHR_OWN_PTY_NA_ID,
PGM_STT_DT, PAY_DIR_IND
order by WRK_PERF_ID, WRK_ID, PTY_NA_ID, PTY_ID
It is just a simple query with group by which i ran by sqlplus but it is geting more then million records. -
10G Oracle Database Configuration Assistant hangs at 39%
I'm trying to install the 10G Infrastructure, but when the OUI launches the OPCA, the OPCA just hangs at 39% and never makes it. Any suggestions?
Thanks,
Franceshi,
I am also having the same problem with DBCA. Usually it hangs at 40% and then dies. When running the scripts, it also crashes and i am not sure where to go from here. To follow is the last bit of the display for the scripts at they run. There are two errors present. I have done my best to research this issue on my own, however, I have not had any success. If anyone can point me in the right direction, it would be much appreciated.
Errors found in script readout below
1. *
ERROR at line 1:
ORA-03113: end-of-file on communication channel
2. ERROR:
ORA-03114: not connected to ORACLE
SQL> Rem NOTES
SQL> Rem
SQL> Rem MODIFIED (MM/DD/YY)
SQL> Rem wechin 02/12/03 - remove 'set' commands
SQL> Rem yuyang 08/29/01 - make load ultrasearch_db.jar
SQL> Rem dczhang 11/17/00 - remove unnecessary exit at the end
SQL> Rem dczhang 10/27/00 - put -resolver arg in separate string passed via 2
SQL> Rem syang 10/17/00 - Created
SQL> Rem
SQL>
SQL> define isearch_lib = "&1"
SQL>
SQL> -- $(SRCHOME)/bin/loadjava -u WKSYS/$(WKSYSPW) -f -r -R "((* wksys) (* public))" -synonym -g public -v -s $(ISEARCHLIB)/ultrasearch_db.$(JAR_EXT)
SQL>
SQL> PROMPT ... loading ultrasearch_db.jar
... loading ultrasearch_db.jar
SQL> call sys.dbms_java.loadjava('-v -f -r -s -g PUBLIC &isearch_lib/ultrasearch_db.jar', '((* wksys) (* public))');
call sys.dbms_java.loadjava('-v -f -r -s -g PUBLIC /u01/app/oracle/product/10.1.0/db_1/ultrasearch/lib/ultrasearch_db.jar', '((* wksys) (* public))')
ERROR at line 1:
ORA-03113: end-of-file on communication channel
SQL>
SQL> undefine isearch_lib
SQL>
SQL>
SQL>
SQL>
SQL>
SQL>
SQL>
SQL> -- populate the wksys schema
SQL> PROMPT ... load wksys
... load wksys
SQL> @&LSH/wk0inst.sql &OH/ultrasearch/data/ &CTXHX &JAVA_EXE_PATH &JSTR &OH/ultrasearch/lib/agent/ &LAUNCH_ANYWHERE &OH/ultrasearch/log/ &OH/ultrasearch/cache/
SQL> Rem
SQL> Rem $Header: wk0inst.sql 12-sep-2003.17:15:00 wechin Exp $
SQL> Rem
SQL> Rem wk0inst.sql
SQL> Rem
SQL> Rem Copyright (c) 1999, 2003, Oracle Corporation. All rights reserved.
SQL> Rem
SQL> Rem NAME
SQL> Rem wk0inst.sql - WK Install
SQL> Rem
SQL> Rem DESCRIPTION
SQL> Rem This moudle installs all packages needed by intermedia search
SQL> Rem
SQL> Rem NOTES
SQL> Rem <other useful comments, qualifications, etc.>
SQL> Rem
SQL> Rem MODIFIED (MM/DD/YY)
SQL> Rem wechin 09/12/03 - bug 3141009: set default log directories
SQL> Rem vnimani 05/06/03 -
Rem vnimani 05/02/03 - remove install_type param as it is no longer usedSQL> Rem echee 11/22/02 - Adding call to wk0postpkg.sql
SQL> Rem syang 10/30/02 - change prompt message for wk0init
SQL> Rem wechin 03/11/02 - fix bug 2259949
SQL> Rem wechin 02/20/02 - use dbms_registry.release_version
SQL> Rem wechin 02/15/02 - update version number in component registry
SQL> Rem syang 02/18/02 - accept LAUNCH_ANYWHERE parameter
SQL> Rem dczhang 01/30/02 - DO NOT SPOOL
SQL> Rem wechin 01/09/02 - component registry
SQL> Rem dczhang 07/09/01 - remove word "isearch"
SQL> Rem syang 07/13/01 - add agent_location
SQL> Rem syang 03/14/01 - no default language for wk0pref.sql
SQL> Rem dczhang 11/17/00 - remove unnecessary exit at the end
SQL> Rem chsin 09/15/00 - add wk0obj.sql
SQL> Rem syang 09/14/00 - use define variables to avoid sqlplus bug
SQL> Rem jshang 08/23/00 - Add data type creation for Query API wrapper
SQL> Rem jechow 08/01/00 - cut the class path
SQL> Rem ymatsuda 03/28/00 - training data dir, config file path
SQL> Rem ymatsuda 03/20/00 -
Rem syang 03/01/00 - create default scheduleSQL> Rem ymatsuda 02/16/00 - multi instance
SQL> Rem echee 02/07/00 - adding seed data population to flow
SQL> Rem syang 02/02/00 - create default web source
SQL> Rem dyu 01/13/00 - Fix classpath too long for sqlplus argument
SQL> Rem syang 01/05/00 - report error gracefully
SQL> Rem swkuo 11/22/99 - create wk0init.sql to initizlize the crawler table
SQL> Rem syang 11/22/99 - add explanation for parameters needed
SQL> Rem swkuo 11/18/99 - pass crawler config parameters
SQL> Rem ymatsuda 11/17/99 - add wk0util
SQL> Rem swkuo 11/11/99 - initialize the WK$CRAWLER table
SQL> Rem swkuo 11/09/99 - use a utility program to load java classes
SQL> Rem syang 11/05/99 - add wk0ddl package
SQL> Rem syang 11/04/99 - crawler seed coulmn type change
SQL> Rem swkuo 11/02/99 - Add the language column
SQL> Rem swkuo 11/01/99 - Created
SQL> Rem
SQL>
SQL> set feedback off verify off
SQL>
SQL> -- if user is not WKSYS then exit
SQL> whenever sqlerror exit;
SQL> set heading off
SQL> select '=== User is ' || USER from dual
2 where 1 = decode(USER,'WKSYS',1,'NOT');
ERROR:
ORA-03114: not connected to ORACLE
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
[oracle@cpsidb scripts]$ -
10g RAC database: instances fail after a few days...
Im afraid I'm new to Oracle, so assume total ignorance when replying!
We have two servers, db1 and db2 running Oracle under Windows 2K3 web edition [SP1].
Both have a shared Direct Attached Storage disk, over a Scsi fibre connection.
The database is set up using instructions found online for RAC.
Either instance will stop, and the other will take over, after a few days. The problem is, we aren't using the database yet. [There isn't a problem with it, the development people have checked that they can use the database.]
The two errors [found using the EM console] which seem to be relevant are:
'Metrics "Database Time Spent Waiting (%)" is at 100 for event class "other"'
and 'Failed to connect to database instance ... TNS no listener'.
[Which is obvioulsly the failure]
I have scoured the web, and the rather dense reference books for Oracle I have access to, and to no avail.
Another contributing factor is the 'WMI Performance Adaptor' stops and starts on both machines every thirty seconds.
Any response/guidlines/advise would be greatly appreciated.
Apologies if I have started this thread in the wrong place!
James
Spelling errors - Message was edited by: jmorseTada, it failed at 4am last night.
Below is the bottom half of the log file.
2005-09-05 15:27:57.796: Attempting to start `ora.gandlake-db2.ASM2.asm` on member `gandlake-db2`
2005-09-05 15:28:04.703: Start of `ora.gandlake-db2.ASM2.asm` on member `gandlake-db2` succeeded.
2005-09-05 15:28:04.921: Attempting to start `ora.x200.x2002.inst` on member `gandlake-db2`
2005-09-05 15:28:33.359: Start of `ora.x200.x2002.inst` on member `gandlake-db2` succeeded.
2005-09-05 15:28:40.578: Start of `ora.x200.x2001.inst` on member `gandlake-db1` succeeded.
2005-09-05 15:28:40.609: CRS Daemon Started.
2005-09-05 15:28:41.140: Attempting to start >`ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1`
2005-09-05 15:30:06.078: Start of `ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1` succeeded.
`ora.gandlake-db1.vip` on `gandlake-db1` went OFFLINE unexpectedly
2005-09-06 19:48:35.703: Attempting to stop `ora.gandlake-db1.vip` on member `gandlake-db1`
2005-09-06 19:48:36.250: Stop of `ora.gandlake-db1.vip` on member `gandlake-db1` succeeded.
Restarting `ora.gandlake-db1.vip` on `gandlake-db1`
2005-09-06 19:48:36.312: Attempting to start `ora.gandlake-db1.vip` on member `gandlake-db1`
2005-09-06 19:48:38.843: Start of `ora.gandlake-db1.vip` on member `gandlake-db1` succeeded.
Successfully restarted `ora.gandlake-db1.vip` on `gandlake-db1`
`ora.gandlake-db1.ons` on `gandlake-db1` went OFFLINE unexpectedly
2005-09-06 22:59:36.875: Attempting to stop `ora.gandlake-db1.ons` on member `gandlake-db1`
2005-09-06 22:59:38.218: Stop of `ora.gandlake-db1.ons` on member `gandlake-db1` succeeded.
Restarting `ora.gandlake-db1.ons` on `gandlake-db1`
2005-09-06 22:59:38.296: Attempting to start `ora.gandlake-db1.ons` on member `gandlake-db1`
2005-09-06 22:59:40.109: Start of `ora.gandlake-db1.ons` on member `gandlake-db1` succeeded.
Successfully restarted `ora.gandlake-db1.ons` on `gandlake-db1`
`ora.gandlake-db1.vip` on `gandlake-db1` went OFFLINE unexpectedly
2005-09-08 04:47:35.078: Attempting to stop `ora.gandlake-db1.vip` on member `gandlake-db1`
2005-09-08 04:47:35.734: Stop of `ora.gandlake-db1.vip` on member `gandlake-db1` succeeded.
`ora.gandlake-db1.vip` ran out of restarts on `gandlake-db1`
`ora.gandlake-db1.vip` failed on `gandlake-db1`, relocating.
2005-09-08 04:47:35.875: Attempting to stop `ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1`
2005-09-08 04:47:36.718: Stop of `ora.gandlake-db1.LISTENER_GANDLAKE-DB1.lsnr` on member `gandlake-db1` succeeded.
2005-09-08 04:47:36.765: Attempting to stop `ora.gandlake-db1.ASM1.asm` on member `gandlake-db1`
2005-09-08 04:47:37.390: [RUNNABLELISTENER:4648] state change aborted (locked): ora.x200.x2001.inst
2005-09-08 04:47:44.578: Stop of `ora.gandlake-db1.ASM1.asm` on member `gandlake-db1` succeeded.
2005-09-08 04:47:44.625: Attempting to stop `ora.x200.x2001.inst` on member `gandlake-db1`
2005-09-08 04:47:46.531: Stop of `ora.x200.x2001.inst` on member `gandlake-db1` succeeded.
2005-09-08 04:47:46.625: Attempting to start `ora.gandlake-db1.vip` on member `gandlake-db2`
2005-09-08 04:47:50.203: Start of `ora.gandlake-db1.vip` on member `gandlake-db2` succeeded.x200 is the name of the database, there are two instances in total, db1 and db2. The company name is 'gandlake', and the machines are called 'gandlake-db1' and 'gandlake-db2'.
Thanks again. -
MULTIPLE USERS 10G RAC ORACLE_HOME INSTALL WITH ASM/CRS
Hi,
We need to install multiple 10g RAC databases on a two node Sun servers. Below is our configuration:
1) Sun Solaris (ver 10) with Sun Cluster 3.2
2) One ASM/CRS install (by 1 OS account)
3) Four ORACLE_HOME 10g database install (by 4 different OS user accounts)
We would like to use one ASM instance for all four databases with appropriate privileges.
OS User: OS Group
======== =========
oraasm dbaasm - (ASM and CRS install owner)
ora1 dbaora1 - first db owner
ora2 dbaora2 - second db owner
ora3 dbaora3 - third db owner
ora4 dbaora4 - fourth db owner
I understand that certain privileges need to be shared between ASM/CRS and DB owners. Please let me know the steps to be followed to complete this install.
Thanks in advance.Hi
Please read that: Documentation http://download.oracle.com/docs/html/B10766_08/intro.htm
- You can install and operate multiple Oracle homes and different versions of Oracle cluster database software on the same computer as described in the following points:
-You can install multiple Oracle Database 10g RAC homes on the same node. The multiple homes feature enables you to install one or more releases on the same machine in multiple Oracle home directories. However, each node can have only one CRS home.
-In addition, you cannot install Oracle Database 10g RAC into an existing single-instance Oracle home. If you have an Oracle home for Oracle Database 10g, then use a different Oracle home, and one that is available across the entire cluster for your new installation. Similarly, if you have an Oracle home for an earlier Oracle cluster database software release, then you must also use a different home for the new installation.
If the OUI detects an earlier version of a database, then the OUI asks you about your upgrade preferences. You have the option to upgrade one of the previous-version databases with DBUA or to create a new database using DBCA. The information collected during this dialog is passed to DBUA or DBCA after the software is installed.
- You can use the OUI to complete some of the de-install and re-install steps for Oracle Database 10g Real Application Clusters if needed.
Note:
Do not move Oracle binaries from one Oracle home to another because this causes dynamic link failures.
. If you are using ASM with Oracle database instances from multiple database homes on the same node, then Oracle recommends that you run the ASM instance from an Oracle home that is distinct from the database homes. In addition, the ASM home should be installed on every cluster node. This prevents the accidental removal of ASM instances that are in use by databases from other homes during the de-installation of a database's Oracle home. -
Help needed in deleting nodes from RAC database
Our DB is 10g RAC database and the servers are Window 2003 server. Initially the database was configured to have 4 nodes. For some reason we stopped the instances in the first two nodes and the current database is running on node3 and node4. I queried the v$thread view and it shows 3 records. Thread 2 is closed and disabled. Thread 3 is open and public and thread 4 is open and private. Now we need to disconnect nodes 1 and 2 from RAC db and cluster ware (We use Oracle cluster ware) and plan to use those two servers for other purposes. Although I read through the Oracle doc regarding deleting node from RAC “11 Adding and Deleting Nodes and Instances on Windows-Based Systems” and wrote down the steps we need to take but I am still not comfortable in doing it since it is production env and we don’t have any dev env to practice those steps. So I would like to borrow your experiences and your lessons learned while you were doing those. Please share your thoughts and insights with us.
Thank you so much for your help,
Shirleywhat's your full version? I can warn about specific issues in 10.1.0.3 and 10.2.0.1 - for example, in some cases (depending on how the listener was configured), it will be impossible to delete the listener for the deleted node. Known bug.
To avoid many many known bugs, you may want to upgrade to at least 10.2.0.2 before removing a node (from my experience, this is the first stable RAC version).
In any case, deleting a node is a rather delicate process. I really really recommend practicing. Take any pc/laptop, install VMWARE, define two virtual machines, install RAC and remove one node. It will take you an extra day or two, and could save your production. -
Migrating VB Applications on SQL Server to Oracle Forms on Oracle 10g RAC
Hello All,
I am looking at migrating a VB application built on a SQL Server database across to an Oracle Forms deployment with the data migrated to an Oracle 10g RAC database environment.
My first question is whether the SQL Developer Migration Workbench can migrate the SQL Server data to a RAC environment?
The second question is to ask whether there are any "toolkits" or tips from the community migrating VB applications to Oracle Forms.
Any advise or suggestions greatly accepted.
Kind Regards,
Gary.SQL Developer Migration Workbench definitely can migrate SQL Server data to Oracle RAC setup.
However, I don't think VB application can be easily converted to Oracle Forms.
You can post your question in Oracle Form forum to double check. -
Using ASSM in 10g RAC with SAP
Hi,
It is recommended to use ASSM (Automatic Segment Space Management) with using 10g RAC with SAP. Our deployment is currently a single instance database that is not using ASSM. We plan to convert this single instance database to a 10g RAC database. I wanted to know what the supported method is to convert to ASSM, during this process.
Will it require an export and import of the database?
ThanksHi Badar,
of course you can move tables (w/o longs) via ALTER TABLE MOVE... but why do you may want to do that?
ALTER TABLE MOVE is an OFFLINE action - nobody can access the table during the move.
DBMS_REDEFINITION (used by the BRTOOLS) is ONLINE. Normal work can proceed while the data is copied.
With ALTER TABLE MOVE you've to touch every single table (ca 50.000-80.000 in a SAP installation) by hand. PLUS you've to rebuild each index on each table by hand.
The BRTOOLS do all that for you. In parallel if you want to.
Moreover the BRTOOLS provide extensive logging in case any error should occur. ALTER TABLE MOVE does not.
So better forget about ALTER TABLE MOVE... use the BRTOOLS - they are not that bad
best regards,
Lars -
Job Scheduling on Oracle 10g RAC
Hi,
If I want to run job on Oracle 10g RAC database having 2 instances suppose n1 and n2 separately and both instances are working/using same Service Name then how could i do this ??
or how to use SID instead of Service Name in Job Class ???
Please guide..... Replay awaited...........Priyanka,
If you are a newcomer to the DBA, I would strongly suggest to invest at least time(if not money for training) in reading documentation related to fields in which you are working. For RAC, this should be a good start( V10.2) ,
http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/toc.htm
can we use these dynamic views in Procedure The counter question is, why? What exactly are you trying to accomplish? If you can tell us this, there may be a better way we may suggest doing that thing?
Aman.... -
Memory Leak when TOMCAT connects to Oracle 10g RAC using JDBC Thin driver.
We had experienced Memory leak when a Oracle 10g (10.2.0.3) RAC node was evicted. TOMCAT app server is connecting to the Oracle 10g RAC database instances using JDBC 10.2.0.3 thin driver.
Anyone had similar experience?
Any ideas? Any bugs reported/fixed?
Thanks,
RajIf you're doing XA, we absolutely do not support
driver-level load-balancing OR failover. Use neither.
For non-XA, you can use driver-level failover. For
non-XA, you could set load-balancing, but it won't
help because we get connections from the driver,
and keep them indefinitely, so the driver never gets
the chance to affect which connections the pool
uses after that. -
Oracle 10g RAC and Unix *rlogin* question
I support several 10g RAC databases, running on IBM pSeries servers using AIX 5.3. Our database and clusterware are 10.2.0.3 and 10.2.0.4.
I understand that user equivalence and rsh/ssh must be enabled in order for the RAC environment and clusterware to communicate across all of the cluster nodes.
My problem is a question being raised by our internal system auditors. The are requesting that the rlogin and exec commands for AIX be disabled, because they feel it is a security risk. Both commands prompt for a valid userid and password when they are used to remotely login or execute a command.
I have reviewed the RAC documentation online, and searched Metalink (I am not a Metalink expert, though!) as well as Google and can't find anything stating that rlogin and exec are specifically required in order for RAC to function properly.
Can anyone offer advice or their perspective on whether or not these two commands need to be enabled in order for RAC to function?
Thank you in advance for any assistance you can give to me.
Regards,
MarkHi Mark,
as far as my knowledge goes RAC does neither use rlogin nor exec commands.
After you setup the cluster Oracle communicates simply via. TCP (clusterware) and UDP (RAC) and is only sending and recieving messages. There is no need during runtime for a remote login.
So als ssh and rsh are solemnly used for installation and patching (not for communication).
Still Oracle recommends to leave them enabled, since it makes life easier than to enable ssh each time a patch is needed.
Sebastian
Maybe you are looking for
-
Hi, I want to disable the text area using textEdit control of HTMLB. if I set disabled= "true" in jsp file, then portal throws runtime error "attribute disabled is not available in HTMLB". Any suggestion. Thanks in advance. Manish
-
Blue screen of death due to usbaapl.sys
I know there has been a lot of writing about this, but I just can't get it to work. I'm running windows vista and have installed itunes 8.02 on my computer. Itunes detects my phone (which is stuck in restore mode) and tries to restore, but after a sh
-
How to give away what's left in order to close the US account?
Hi there, I've had an iTunes account in the US and I need to change the country and address to France where I moved. For doing such modification, iTunes requires to use all the money in the US account which is 91 cts for me now. I don't have any bank
-
Problems when deploying web service onto Weblogic 12c
Hello everybody: Created a web service with MyEclipse 8.5; when deploying onto Weblogic I'm facing this next problem: Nov 3, 2012 7:44:40 AM com.sun.xml.ws.transport.http.servlet.WSServletDelegate destroy INFO: WSSERVLET15: JAX-WS servlet destroyed N
-
Whatsapp can only access camera roll
Why is Whatsapp only able to access camera roll and not other albums?