11g gateway for ODBC returns SYNTAX ERROR on query

Hi,
I have made a database link to an odbc link on a 11g gateway. The odbc driver for the database in question is called connx, a third party driver to connect to RMS files on an old vax. The odbc driver works fine as I tested it independently of the gateway.
The database link connection is fine. I do desc tablename and it returns the correct columns
I do for example select * from SICF090MLT@melt and it returns :
meltdb>select * from SICF090MLT@melt;
select * from SICF090MLT@melt
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
Illegal identifier
A1."CHARGE_NO" , A1."MIX_ID" , A1."BUCKET_ID" , A1."AIM_ST" , A1."SCRAP_MIX_NAME" FROM << Syntax Error >> 'SICF090MLT' A1
ORA-02063: preceding 3 lines from MELT
As you can see all of the columns have been discovered by the query,
I am not sure what can be the issue. Maybe a character translation issue? Some configuration settings for the gateway? Any ideas?
On a side note: all other database links to other databases (sqlserver) work fine with this 11g gateway.
The Best to all of you!

Mireille,
I am using a win32 driver.
HS_FDS_SUPPORT_STATISTICS is false for all my database links. I have had issues with that in the past and have already learned my lesson :)
I will check the quoted identifier setting for my odbc link and change it if I can.
As a side note: for now I am using the DBMS_HS_PASSTHROUGH package to get around the problem, but it is better if I solve my original problem obviously. I will let you know.
Merci et bonne journée.

Similar Messages

Error fetching data from a foxpro db using Oracle Gateway for ODBC

Hi.
I have an 10.2.0.1 database an a 11.2.0 Oracle Gateway for ODBC installed and configured.
The dblink test works fine, I can connect with the foxpro database because if I execute desc centros I can see the
columns of table centros.
The problem comes when I try to execute Select * from centros@fox1;
A syntax error is returned ([Microsoft][ODBC Visual FoxPro Driver]Syntax error. {42000,NativeErr = 200})
I paste down the output of the trace file with HS_FDS_TRACE_LEVEL=255
If I run select codcen from centros@fox1; another error is shown. Tell me if you want the other trace file.
select codcen from centros@fox1
ERROR en lÝnea 1:
ORA-00904: "CODCEN": identificador no vßlido
Oracle Corporation --- JUEVES MAY 31 2012 13:11:24.765
Heterogeneous Agent Release
11.2.0.1.0
Oracle Corporation --- JUEVES MAY 31 2012 13:11:24.750
Version 11.2.0.1.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "255"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
setting HS_FDS_RECOVERY_PWD to default value
setting HS_FDS_TRANSACTION_LOG to default of HS_TRANSACTION_LOG
setting HS_IDLE_TIMEOUT to default of 0
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "UCS2"
setting HS_FDS_TIMESTAMP_MAPPING to default of "DATE"
setting HS_FDS_DATE_MAPPING to default of "DATE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_RSET_RETURN_ROWCOUNT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "TRUE"
setting HS_FDS_SUPPORT_STATISTICS to default of "FALSE"
Parameter HS_FDS_QUOTE_IDENTIFIER is not set
setting HS_KEEP_REMOTE_COLUMN_SIZE to default of "OFF"
setting HS_FDS_GRAPHIC_TO_MBCS to default of "FALSE"
setting HS_FDS_MBCS_TO_GRAPHIC to default of "FALSE"
Default value of 32 assumed for HS_FDS_SQLLEN_INTERPRETATION
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics;gtw$:SQLGetInfo"
setting HS_FDS_DELAYED_OPEN to default of "TRUE"
setting HS_FDS_WORKAROUNDS to default of "0"
Exiting hgosdip, rc=0
ORACLE_SID is "DAVID"
Product-Info:
Port Rls/Upd:1/0 PrdStat:0
Agent:Oracle Database Gateway for ODBC
Facility:hsa
Class:ODBC, ClassVsn:11.2.0.1.0_0008, Instance:DAVID
Exiting hgogprd, rc=0
hostmstr: 2057416704: HOA After hoagprd
hostmstr: 2057416704: HOA Before hoainit
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=1000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2012/05/31-13:11:25
Exiting hgolofn, rc=0 at 2012/05/31-13:11:25
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
Invalid value of 32 given for HS_FDS_SQLLEN_INTERPRETATION
treat_SQLLEN_as_compiled = 1
Exiting hgoinit, rc=0 at 2012/05/31-13:11:25
hostmstr: 2057416704: HOA After hoainit
hostmstr: 2057416704: HOA Before hoalgon
Entered hgolgon at 2012/05/31-13:11:25
reco:0, name:SYSTEM, tflag:0
Entered hgosuec at 2012/05/31-13:11:25
Exiting hgosuec, rc=0 at 2012/05/31-13:11:25
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using SYSTEM as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2012/05/31-13:11:25
HS_FDS_CONNECT_INFO = "Prueba_Foxpro"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2012/05/31-13:11:25
dsn:Prueba_Foxpro, name:SYSTEM
optn:
Entered hgocip at 2012/05/31-13:11:25
dsn:Prueba_Foxpro
Exiting hgocip, rc=0 at 2012/05/31-13:11:25
##>Connect Parameters (len=39)<##
## DSN=Prueba_Foxpro;
#! UID=SYSTEM;
#! PWD=*
Exiting hgogenconstr, rc=0 at 2012/05/31-13:11:25
Entered hgopoer at 2012/05/31-13:11:26
hgopoer, line 233: got native error 0 and sqlstate 01000; message follows...
[*Microsoft][Administrador de controladores ODBC] El controlador no admite una versión de ODBC distinta de la que la necesita la aplicación (vea SQLSetEnvAttr)*. {01000}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:26
hgocont, line 2686: calling SqlDriverConnect got sqlstate 01000
Entered hgolosf at 2012/05/31-13:11:26
ODBC Function-Available-Array 0xFFFE 0x00FF 0xFF00 0xAA7F 0x03B3 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
0x0000 0x0000 0xEE00 0x395C
Exiting hgolosf, rc=0 at 2012/05/31-13:11:26
DriverName:VFPODBC.DLL, DriverVer:06.86.0001
DBMS Name:Visual FoxPro, DBMS Version:03.00.0000
Exiting hgocont, rc=0 at 2012/05/31-13:11:26 with error ptr FILE:hgocont.c LINE:2686 ID:SQLDriverConnect
Entered hgopoer at 2012/05/31-13:11:26
hgopoer, line 233: got native error 0 and sqlstate HYC00; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Driver not capable {HYC00}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:26
hgolgon, line 795: calling SQLGetInfo got sqlstate HYC00
SQLGetInfo returns N for SQL_CATALOG_NAME
Exiting hgolgon, rc=0 at 2012/05/31-13:11:26 with error ptr FILE:hgolgon.c LINE:795 ID:GetInfo: Support catalogs
hostmstr: 2036506624: HOA After hoalgon
RPC Calling nscontrol(0), rc=0
hostmstr: 2036506624: RPC Before Upload Caps
hostmstr: 2036506624: HOA Before hoaulcp
Entered hgoulcp at 2012/05/31-13:11:26
Entered hgowlst at 2012/05/31-13:11:26
Exiting hgowlst, rc=0 at 2012/05/31-13:11:26
SQLGetInfo returns 0x0 for SQL_OWNER_USAGE
TXN Capable:1, Isolation Option:0x2
SQLGetInfo returns 0 for SQL_MAX_SCHEMA_NAME_LEN
SQLGetInfo returns 128 for SQL_MAX_TABLE_NAME_LEN
SQLGetInfo returns 0 for SQL_MAX_PROCEDURE_NAME_LEN
SQLGetInfo returns ` (0x60) for SQL_IDENTIFIER_QUOTE_CHAR
SQLGetInfo returns Y for SQL_COLUMN_ALIAS
16 instance capabilities will be uploaded
capno:1964, context:0x00000000, add-info: 0
capno:1989, context:0x00000000, add-info: 0
capno:1991, context:0x0001ffff, add-info: 0
capno:1992, context:0x0001ffff, add-info: 1, translation:"`"
capno:3042, context:0x00000000, add-info: 0, translation:"42"
capno:3047, context:0x00000000, add-info: 0, translation:"57"
capno:3049, context:0x00000000, add-info: 0, translation:"59"
capno:3050, context:0x00000000, add-info: 0, translation:"60"
capno:3066, context:0x00000000, add-info: 0
capno:3067, context:0x00000000, add-info: 0
capno:3068, context:0x00000000, add-info: 0
capno:3069, context:0x00000000, add-info: 0
capno:3500, context:0x00000001, add-info: 91, translation:"42"
capno:3501, context:0x00000001, add-info: 93, translation:"57"
capno:3502, context:0x00000001, add-info: 107, translation:"59"
capno:3503, context:0x00000001, add-info: 110, translation:"60"
Exiting hgoulcp, rc=0 at 2012/05/31-13:11:26
hostmstr: 2036506624: HOA After hoaulcp
hostmstr: 2036506624: RPC After Upload Caps
hostmstr: 2036506624: RPC Before Upload DDTR
hostmstr: 2036506624: HOA Before hoauldt
Entered hgouldt at 2012/05/31-13:11:27
NO instance DD translations were uploaded
Exiting hgouldt, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624: HOA After hoauldt
hostmstr: 2036506624: RPC After Upload DDTR
hostmstr: 2036506624: RPC Before Begin Trans
hostmstr: 2036506624: HOA Before hoabegn
Entered hgobegn at 2012/05/31-13:11:27
tflag:0 , initial:1
hoi:0x12f094, ttid (len 54) is ...
00: 54455354 2E524547 52455353 2E524442 [TEST.REGRESS.RDB]
10: 4D532E44 45562E55 532E4F52 41434C45 [MS.DEV.US.ORACLE]
20: 2E434F4D 2E663033 63383037 372E392E [.COM.f03c8077.9.]
30: 34342E37 3735 [44.775]
tbid (len 10) is ...
0: 09002C00 07030000 0104 [..,.......]
Exiting hgobegn, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624: HOA After hoabegn
hostmstr: 2036506624: RPC After Begin Trans
hostmstr: 2036506624: RPC Before Describe Table
hostmstr: 2036506624: HOA Before hoadtab
Entered hgodtab at 2012/05/31-13:11:27
count:1
table: CENTROS
Entered hgopdsc at 2012/05/31-13:11:27
Describing procedure CENTROS
Output hoada
hgopdsc, line 1426: NO hoada to print
Exiting hgopdsc, rc=942 at 2012/05/31-13:11:27
The hoada for table CENTROS follows...
hgodtab, line 904: NO hoada to print
Exiting hgodtab, rc=0 at 2012/05/31-13:11:27
hostmstr: 2036506624: HOA After hoadtab
hostmstr: 2036506624: RPC After Describe Table
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624: HOA Before hoxpars
Entered hgopars, cursor id 1 at 2012/05/31-13:11:27
type:0
SQL text from hgopars, id=1, len=23 ...
00: 53454C45 4354202A 2046524F 4D202243 [SELECT * FROM "C]
10: 454E5452 4F5322 [ENTROS"]
Exiting hgopars, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoxpars
hostmstr: 2036506624: RPC After SQL Bundling
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624: HOA Before hoxopen
Entered hgoopen, cursor id 1 at 2012/05/31-13:11:28
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoxopen
hostmstr: 2036506624: HOA Before hoxdscr
Entered hgodscr, cursor id 1 at 2012/05/31-13:11:28
Allocate hoada @ 023E983C
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]*Descriptor type out of range* {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:1(codcen): dtype:1 (CHAR), prc/scl:8/0, nullbl:0, octet:8, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:2(litcen): dtype:1 (CHAR), prc/scl:45/0, nullbl:0, octet:45, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:3(codpos): dtype:1 (CHAR), prc/scl:5/0, nullbl:0, octet:5, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:4(codprov): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:5(codmun): dtype:1 (CHAR), prc/scl:3/0, nullbl:0, octet:3, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:6(codecol): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:7(codesin): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:8(cb): dtype:1 (CHAR), prc/scl:4/0, nullbl:0, octet:4, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:9(cs): dtype:1 (CHAR), prc/scl:4/0, nullbl:0, octet:4, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:10(digitocon): dtype:1 (CHAR), prc/scl:2/0, nullbl:0, octet:2, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:11(cuenta): dtype:1 (CHAR), prc/scl:10/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopcda at 2012/05/31-13:11:28
Column:12(solar): dtype:2 (NUMERIC), prc/scl:5/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopcda at 2012/05/31-13:11:28
Column:13(construido): dtype:2 (NUMERIC), prc/scl:5/0, nullbl:0, octet:10, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:14(domicen): dtype:1 (CHAR), prc/scl:40/0, nullbl:0, octet:40, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:15(telef): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:16(fax): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:17(cif): dtype:1 (CHAR), prc/scl:11/0, nullbl:0, octet:11, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Descriptor type out of range {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
Entered hgopcda at 2012/05/31-13:11:28
Column:18(litloc): dtype:1 (CHAR), prc/scl:30/0, nullbl:0, octet:30, sign:1, radix:0
Exiting hgopcda, rc=0 at 2012/05/31-13:11:28
hgodscr, line 910: Printing hoada @ 023E983C
MAX:18, ACTUAL:18, BRC:100, WHT=5 (SELECT_LIST)
hoadaMOD bit-values found (0x200:TREAT_AS_CHAR)
DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
1 CHAR N 8 8 0/ 0 0 0 200 codcen
1 CHAR N 45 45 0/ 0 0 0 200 litcen
1 CHAR N 5 5 0/ 0 0 0 200 codpos
1 CHAR N 2 2 0/ 0 0 0 200 codprov
1 CHAR N 3 3 0/ 0 0 0 200 codmun
1 CHAR N 2 2 0/ 0 0 0 200 codecol
1 CHAR N 2 2 0/ 0 0 0 200 codesin
1 CHAR N 4 4 0/ 0 0 0 200 cb
1 CHAR N 4 4 0/ 0 0 0 200 cs
1 CHAR N 2 2 0/ 0 0 0 200 digitocon
1 CHAR N 10 10 0/ 0 0 0 200 cuenta
3 DECIMAL N 7 7 5/ 0 0 0 0 solar
3 DECIMAL N 7 7 5/ 0 0 0 0 construido
1 CHAR N 40 40 0/ 0 0 0 200 domicen
1 CHAR N 11 11 0/ 0 0 0 200 telef
1 CHAR N 11 11 0/ 0 0 0 200 fax
1 CHAR N 11 11 0/ 0 0 0 200 cif
1 CHAR N 30 30 0/ 0 0 0 200 litloc
Exiting hgodscr, rc=0 at 2012/05/31-13:11:28 with error ptr FILE:hgodscr.c LINE:615 ID:Transfer Octet Length
hostmstr: 2036506624: HOA After hoxdscr
hostmstr: 2036506624: RPC After SQL Bundling
hostmstr: 2036506624: RPC Before SQL Bundling
hostmstr: 2036506624: HOA Before hoxclse
Entered hgoclse, cursor id 1 at 2012/05/31-13:11:28
Exiting hgoclse, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoxclse
hostmstr: 2036506624: HOA Before hoadafr
Entered hgodafr, cursor id 1 at 2012/05/31-13:11:28
Free hoada @ 023E983C
Exiting hgodafr, rc=0 at 2012/05/31-13:11:28
hostmstr: 2036506624: HOA After hoadafr
hostmstr: 2036506624: HOA Before hoxpars
Entered hgopars, cursor id 1 at 2012/05/31-13:11:28
type:0
SQL text from hgopars, id=1, len=235 ...
00: 53454C45 43542041 312E2263 6F646365 [SELECT A1."codce]
10: 6E222C41 312E226C 69746365 6E222C41 [n",A1."litcen",A]
20: 312E2263 6F64706F 73222C41 312E2263 [1."codpos",A1."c]
30: 6F647072 6F76222C 41312E22 636F646D [odprov",A1."codm]
40: 756E222C 41312E22 636F6465 636F6C22 [un",A1."codecol"]
50: 2C41312E 22636F64 6573696E 222C4131 [,A1."codesin",A1]
60: 2E226362 222C4131 2E226373 222C4131 [."cb",A1."cs",A1]
70: 2E226469 6769746F 636F6E22 2C41312E [."digitocon",A1.]
80: 22637565 6E746122 2C41312E 22736F6C ["cuenta",A1."sol]
90: 6172222C 41312E22 636F6E73 74727569 [ar",A1."construi]
A0: 646F222C 41312E22 646F6D69 63656E22 [do",A1."domicen"]
B0: 2C41312E 2274656C 6566222C 41312E22 [,A1."telef",A1."]
C0: 66617822 2C41312E 22636966 222C4131 [fax",A1."cif",A1]
D0: 2E226C69 746C6F63 22204652 4F4D2022 [."litloc" FROM "]
E0: 43454E54 524F5322 204131 [CENTROS" A1]
Entered hgopoer at 2012/05/31-13:11:28
hgopoer, line 233: got native error 200 and sqlstate 42000; message follows...
[Microsoft][ODBC Visual FoxPro Driver]Syntax error. {42000,NativeErr = 200}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgopars, line 457: calling SQLPrepare got sqlstate 42000
Exiting hgopars, rc=28500 at 2012/05/31-13:11:28 with error ptr FILE:hgopars.c LINE:487 ID:Prepare stmt
hostmstr: 2036506624: HOA After hoxpars
hostmstr: 2036506624: RPC After SQL Bundling

The first issue I see is that Oracle 10.2.0.1 was never certified with DG4ODBC 11. Only 10.2.0.4 or 10.2.0.5 can be used as the Oracle database HS kernel requires a gateway compatibility patch and this patch is included in 10.2.0.4 or 10.2.0.5 Oracle database patch set.
Then another error in the trace is that for each column description you have an error:
hgopoer, line 233: got native error 0 and sqlstate HY091; message follows...
[Microsoft][ODBC Visual FoxPro Driver]*Descriptor type out of range* {HY091}
Exiting hgopoer, rc=0 at 2012/05/31-13:11:28
hgodscr, line 615: calling SQLColAttribute got sqlstate HY091
It seems it is not critical as DG4ODBC continues, but a more detailed analysis would require an ODBC trace.
When looking at the table description it seems the column names are all in lower letters, for example: solar. So commonly Dg4ODBC needs to quote the names
00: 53454C45 43542041 312E2263 6F646365 [SELECT A1."codce]
10: 6E222C41 312E226C 69746365 6E222C41 [n",A1."litcen",A]
20: 312E2263 6F64706F 73222C41 312E2263 [1."codpos",A1."c]
30: 6F647072 6F76222C 41312E22 636F646D [odprov",A1."codm]
40: 756E222C 41312E22 636F6465 636F6C22 [un",A1."codecol"]
50: 2C41312E 22636F64 6573696E 222C4131 [,A1."codesin",A1]
60: 2E226362 222C4131 2E226373 222C4131 [."cb",A1."cs",A1]
70: 2E226469 6769746F 636F6E22 2C41312E [."digitocon",A1.]
80: 22637565 6E746122 2C41312E 22736F6C ["cuenta",A1."sol]
90: 6172222C 41312E22 636F6E73 74727569 [ar",A1."construi]
A0: 646F222C 41312E22 646F6D69 63656E22 [do",A1."domicen"]
B0: 2C41312E 2274656C 6566222C 41312E22 [,A1."telef",A1."]
C0: 66617822 2C41312E 22636966 222C4131 [fax",A1."cif",A1]
D0: 2E226C69 746C6F63 22204652 4F4D2022 [."litloc" FROM "]
E0: 43454E54 524F5322 204131 [CENTROS" A1]
and according to the trace the FoxPro ODBC driver doesn't like these quotes and reports a syntax error.
So this explains at least why select codcen from centros@fox1 will fail. In general the Oracle database is case insensitive and translates all object names to upper case and the select it will pass to the foreign database would be similar to:
select CODCEN from CENTROS => which will fail as FoxPro is case sensitive. So the error message ORA-00904 (missing column name) is correct and the statement you need to use is:
select "codcen" from centros@fox1;
But this might lead again to the Syntax error you got earlier => You need to check which sign (single quote, back tick, double quote) Foxpro uses to quote object names and then set the gateway parameter HS_FDS_QUOTE_IDENTIFIER accordingly.
To check which character can be used to quote column/table names you might use the Microsoft ODBc test utility which was distributed in the old MDAC 2.8:
http://www.microsoft.com/downloads/details.aspx?familyid=5067faf8-0db4-429a-b502-de4329c8c850&displaylang=en
Edited by: kgronau on Jun 1, 2012 7:27 AM
If you know where I can download the MS FoxPro ODBC driver, please let me know and I'll check.

Oracle optimizer and heterogeneous services (Transparent Gateway for ODBC)

Hi everyone!
We have the following configuration:
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production.
Oracle Database Gateway for ODBC 11.2.0.2.0 on the same machine as Oracle DB.
Non-Oracle DB installed on a different hardware accessed through Oracle Gateway for ODBC via dblink.
Now, we have to query the remote non-Oracle system and retrieve some data. For the sake of brevity let's suppose we have the following table in our non-Oracle DB:
create table test (
 ip_address varchar(15),
 start_time datetime,
 end_time datetime
And we run the following SQL query against the remote table on our Oracle DB:
SELECT start_time,end_time,ip_address
FROM remote_table@db_link
WHERE
end_time >= to_date('2011-10-11 00:00:00','rrrr-mm-dd hh24:mi:ss')
OR (
end_time IS NULL AND start_time >= to_date('2011-10-11 00:00:00','rrrr-mm-dd hh24:mi:ss')
AND start_time <= to_date('2011-10-12 00:00:00','rrrr-mm-dd hh24:mi:ss')
AND ip_address = '127.0.0.1';
But, having query monitoring on the remote DB enabled, we see that the actual query on the remote site looks like this:
SELECT "START_TIME","END_TIME","IP_ADDRESS"
FROM "REMOTE_TABLE"
WHERE "IP_ADDRESS"='127.0.0.1' AND "START_TIME"<=?
All references to END_TIME column are gone from WHERE clause for whatever reason.
However, Oracle execution plan shows us the following:
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time | Inst |IN-OUT|
| 0 | SELECT STATEMENT | | 1 | 27 | 200 (0)| 00:00:03 | | |
|* 1 | FILTER | | 1 | 27 | 200 (0)| 00:00:03 | | |
| 2 | REMOTE | REMOTE_TABLE | | | | | DB_LINK | R->S |
Predicate Information (identified by operation id):
1 - filter("END_TIME">=TO_DATE('2011-10-11 00:00:00','rrrr-mm-dd hh24:mi:ss') OR
"END_TIME" IS NULL AND "START_TIME">=TO_DATE('2011-10-11 00:00:00','rrrr-mm-dd hh24:mi:ss'))
Remote SQL Information (identified by operation id):
2 - SELECT "END_TIME","IP_ADDRESS","START_TIME" FROM "REMOTE_TABLE" WHERE
"IP_ADDRESS"='127.0.0.1' AND "START_TIME"<=:1 (accessing 'DB_LINK' )
This actually means that Oracle CBO decided that it will apply filter on END_TIME column after having retrieved the data from the remote site. We don't want this behaviour but have no idea how to affect execution plan in this case.
So, the question is: How can we force Oracle CBO to not change the initial query and pass it to the remote site "as is"? Is there any way we can achieve this goal?
Edited by: user12024904 on 28-Oct-2011 04:05

Hi,
Our Oracle DB and Gateway are running on the following system:
HP-UX B.11.31 U ia64
The following SQL code is executed in SQLPlus:
SELECT start_time,end_time,ip_address
FROM ip_acc_complete@gr_link
WHERE
END_TIME >= to_date('2010-10-21 00:00:00','rrrr-mm-dd hh24:mi:ss')
OR (
END_TIME is null AND START_TIME >= to_date('2010-10-21 00:00:00','rrrr-mm-dd hh24:mi:ss')
AND START_TIME <= to_date('2010-10-22 00:00:00','rrrr-mm-dd hh24:mi:ss')
AND IP_ADDRESS = '127.0.0.1';
Gateway debug trace shows the following:
Oracle Corporation --- TUESDAY NOV 01 2011 14:59:15.254
Heterogeneous Agent Release
11.2.0.2.0
Oracle Corporation --- TUESDAY NOV 01 2011 14:59:15.254
Version 11.2.0.2.0
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "ON"
HOSGIP for "HS_FDS_SHAREABLE_NAME" returned "/usr/local/greenwich64/lib/libodbc.so.1"
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
HOSGIP for "HS_KEEP_REMOTE_COLUMN_SIZE" returned "OFF"
HOSGIP for "HS_FDS_DELAYED_OPEN" returned "TRUE"
HOSGIP for "HS_FDS_WORKAROUNDS" returned "0"
HOSGIP for "HS_FDS_MBCS_TO_GRAPHIC" returned "FALSE"
HOSGIP for "HS_FDS_GRAPHIC_TO_MBCS" returned "FALSE"
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned "HS_TRANSACTION_LOG"
HOSGIP for "HS_FDS_TIMESTAMP_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_DATE_MAPPING" returned "DATE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULTSET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_RSET_RETURN_ROWCOUNT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using query as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
SQL text from hgopars, id=1, len=117 ...
00: 53454C45 43542022 454E445F 54494D45 [SELECT "END_TIME]
10: 222C2249 505F4144 44524553 53222C22 [","IP_ADDRESS","]
20: 53544152 545F5449 4D452220 46524F4D [START_TIME" FROM]
30: 20224950 5F414343 5F434F4D 504C4554 [ "IP_ACC_COMPLET]
40: 45222057 48455245 20224950 5F414444 [E" WHERE "IP_ADD]
50: 52455353 223D2731 32372E30 2E302E31 [RESS"='127.0.0.1]
60: 2720414E 44202253 54415254 5F54494D [' AND "START_TIM]
70: 45223C3D 3F [E"<=?]
Deferred open until first fetch.
Performing delayed open.
The non-Oracle DB is CopperEye Retrieval Server with its own custom ODBC driver.
CopperEye query log shows that the following query is received from Oracle Gateway:
01/11/2011 14:26:31 - NEW QUERY :
SELECT "END_TIME","IP_ADDRESS","START_TIME" FROM "IP_ACC_COMPLETE" WHERE "IP_ADDRESS"='127.0.0.1' AND "START_TIME"<=?
which complies with the information in Oracle Gateway trace file.
So, it seems that it's Oracle DB decision to split the original WHERE clause into two parts, delegate one part to the remote site, retrieve the data and then apply the remaining filter locally.

How to configure distributed transaction in Oracle Database Gateway for ODBC? (ORA-02047)

I am connecting from Oracle to another database server (MS SQL Server, DB2 the error message is the same) through an ODBC connection using Oracle SQL Developer. (This is how I set up)
I want to query the schema of a non-Oracle database using the data dictionary mapping of the Oracle Database Gateway for ODBC.
This works well:
select * from all_tables@katimssql;
But this doesn't:
create table alltables_mssql as
select * from all_tables@katimssql;
Output:
Error report:
SQL Error: ORA-00604: error occurred at recursive SQL level 1
ORA-02047: cannot join the distributed transaction in progress
ORA-06512: at "SYS.HS$_DDTF_SQLTABLES", line 58
ORA-06512: at line 1
Does anyone know the solution of this?
Thanks in advance,
Kata
Details:
Oracle Database 11g Express Edition Release 11.2.0.2.0
Microsoft SQL Server 2008 (SP2) - 10.0.4000.0 (X64)
ODBC Driver: SQL Server Native Client 11.0 (32 bit)
initkatimssql.ora:
HS_FDS_CONNECT_INFO=katimssql
HS_FDS_TRACE_LEVEL = ON
HS_TRANSACTION_MODEL = READ_ONLY_AUTOCOMMIT
I tried these, none of them worked, the error message is the same.
HS_FDS_TRACE_LEVEL = off
HS_TRANSACTION_MODEL = SINGLE_SITE
HS_TRANSACTION_MODEL = READ_ONLY_AUTOCOMMIT
HS_TRANSACTION_MODEL = READ_ONLY

Hi Kata,
this won't work as the ALL_TABLES is not a table that exists in your SQl Server - instead it is a "mimicked" table. This means the gateway will check if you have on your SQL Server a table called all_tables and when there's no table it will start an internal mechanism to check out what sort of tables exist in your SQL Server database. So the gateway is starting internally another transaction to get details from the foreign database and DG4ODBC can't participate in distributed transactions at all. Instead of using all_tables you have to use a real SQL Server table like SQ Server sys.objects or sys.tables.
- Klaus

Oracle Database Gateway for ODBC with Oracle XE

Dear Colleague,
Is it possible to use the Oracle Database Gateway for ODBC in conjunction with the Oracle Express Edition (or does one have to use the Standard or Enterprise Editions)? If yes, are there any restrictions when using the Oracle Database Gateway for ODBC in the context of Oracle XE?
Best regards,
Randy

Hi,
As it says, as long as you have an RDBMS license then you do not need a separate license for DG4ODBC. If the confusion is where it says "Oracle Database Gateway for ODBC can be installed and used on a machine different" then that is just to clarify that you can run the gateway on a completely separate machine from where the licensed RDBMS is running, but you can also run DG4ODBC on the same machine where the RDBMS is installed.
If you install 11g DG4ODBC on the same machine where you have a 10g RDBMS then it must be installed into a separate ORACLE_HOME.
If this is still not clear then please get back and let us know exactly what you need clarifying.
Regards,
Mike

TNG_recordset Syntax error in query. Incomplete query clause.

I'm using the ADDT insert record form wizard and I keep getting this error: Syntax error in query. Incomplete query clause. Can anyone help?
 
 <%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>
 

 

 

 <% 'Start log out user Set logout = new tNG_Logout logout.setLogoutType "link" logout.setPageRedirect "../index.html" logout.Execute 'End log out user %>
 <% 'Make a transaction dispatcher instance Dim tNGs: Set tNGs = new tNG_dispatcher tNGs.Init "../" %>
 <% ' Start trigger Dim formValidation: Set formValidation = new tNG_FormValidation formValidation.Init formValidation.addField "ContactFirstName", true, "text", "", "", "", "" formValidation.addField "ContactLastName", true, "text", "", "", "", "" formValidation.addField "EmailAddress", true, "text", "email", "", "", "" formValidation.addField "BillingAddress", true, "text", "", "", "", "" formValidation.addField "City", true, "text", "", "", "", "" formValidation.addField "StateOrProvince", true, "text", "", "", "", "" formValidation.addField "ZipCode", true, "numeric", "", "", "", "" formValidation.addField "PhoneNumber", true, "text", "", "", "", "" tNGs.prepareValidation formValidation ' End trigger %>
 <% 'Start Restrict Access to Page Dim restrict: Set restrict = new tNG_RestrictAccess restrict.Init MM_rentalpaypro_STRING, "../" 'Grand Levels: Any restrict.Execute 'End Restrict Access to Page %>
 <% ' Make an insert transaction instance Dim ins__Landlord_Contact_Info_: Set ins__Landlord_Contact_Info_ = new tNG_insert ins__Landlord_Contact_Info_.init MM_rentalpaypro_STRING tNGs.addTransaction ins__Landlord_Contact_Info_ ' Register triggers ins__Landlord_Contact_Info_.registerTrigger Array("STARTER", "Trigger_Default_Starter", 1, "POST", "KT_Insert1") ins__Landlord_Contact_Info_.registerTrigger Array("BEFORE", "Trigger_Default_FormValidation", 10, formValidation) ins__Landlord_Contact_Info_.registerTrigger Array("END", "Trigger_Default_Redirect", 99, "index.asp") ' Add columns ins__Landlord_Contact_Info_.setTable ""Landlord_Contact Info"" ins__Landlord_Contact_Info_.addColumn "ContactFirstName", "STRING_TYPE", "POST", "ContactFirstName", "" ins__Landlord_Contact_Info_.addColumn "ContactLastName", "STRING_TYPE", "POST", "ContactLastName", "" ins__Landlord_Contact_Info_.addColumn "EmailAddress", "STRING_TYPE", "POST", "EmailAddress", "" ins__Landlord_Contact_Info_.addColumn "BillingAddress", "STRING_TYPE", "POST", "BillingAddress", "" ins__Landlord_Contact_Info_.addColumn "City", "STRING_TYPE", "POST", "City", "" ins__Landlord_Contact_Info_.addColumn "CompanyName", "STRING_TYPE", "POST", "CompanyName", "" ins__Landlord_Contact_Info_.addColumn "StateOrProvince", "STRING_TYPE", "POST", "StateOrProvince", "" ins__Landlord_Contact_Info_.addColumn "ZipCode", "NUMERIC_TYPE", "POST", "ZipCode", "" ins__Landlord_Contact_Info_.addColumn "Extension", "STRING_TYPE", "POST", "Extension", "" ins__Landlord_Contact_Info_.addColumn "FaxNumber", "STRING_TYPE", "POST", "FaxNumber", "" ins__Landlord_Contact_Info_.addColumn "PhoneNumber", "STRING_TYPE", "POST", "PhoneNumber", "" ins__Landlord_Contact_Info_.setPrimaryKey "ContactInfoID", "NUMERIC_TYPE", "", "" %>
 <% 'Execute all the registered transactions tNGs.executeTransactions %>
 <% 'Get the transaction recordset Dim rs_Landlord_Contact_Info_ Dim rs_Landlord_Contact_Info__numRows Set rs_Landlord_Contact_Info_ = tNGs.getRecordset(""Landlord_Contact Info"") rs_Landlord_Contact_Info__numRows = 0 %>

Are you sure that you are passing the querystring customerid
when the form
company_cus is empty.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"aonefun" <[email protected]> wrote in
message
news:epmf3n$f3u$[email protected]..
>I am receiving the following error message:
>
> Microsoft][ODBC Microsoft Access Driver] Syntax error
(missing operator)
> in
> query expression 'customerid_cus='.
>
> for the following code:
>
> If IsEmpty(Request.Form("company_cus")) Then
>
> rs_company.Source = "SELECT customerid_cus, company_cus
FROM
> customers_cus
> WHERE customerid_cus= "&
Request.QueryString("customerid") &" "
>
> Else
>
> rs_company.Source = "SELECT customerid_cus, company_cus
FROM
> customers_cus
> WHERE company_cus = '"& Request.Form("company_cus")
>
> End If
>
> What could the problem be?
>

Syntax error (parsing query)

I'm trying to search based on two properties and got an exception:
syntax error (parsing query);location=trexsahqt1v:30003 (Errorcode 2029)
If i set only one condition my code is working fine
My code....
for(int i = 0; i < searchParams.length; i++)
IQueryEntry queryEntry = indexCollection.getNewQueryEntry()
if ("createdby".equalsIgnoreCase(searchParams.getPropertyName()))
 queryEntry.setRowType(IQueryEntry.ROW_TYPE_ATTRIBUTE);
 queryEntry.setTermAction(IQueryEntry.TERM_ACTION_EXACT);
 queryEntry.setPropertyName(PropertyName.createCreatedBy());
 queryEntry.setValue("same value")
 queryEntry.setPropertyOperator(IQueryEntry.PROPERTY_OPERATOR_EQUAL);
 queryEntryList.add(queryEntry);
 if ("modifiedby:".equalsIgnoreCase(searchParams.getPropertyName()))
 queryEntry.setRowType(IQueryEntry.ROW_TYPE_ATTRIBUTE);
 queryEntry.setTermAction(IQueryEntry.TERM_ACTION_EXACT);
 queryEntry.setPropertyName(PropertyName.createCreatedBy());
 queryEntry.setValue("same value");
 queryEntry.setPropertyOperator(IQueryEntry.PROPERTY_OPERATOR_EQUAL);
 queryEntryList.add(queryEntry);
Is any "AND" or "OR" operators I have to setup , if yes please let me know how?
Really appreciate your help

I'm trying to search based on two properties and got an exception:
syntax error (parsing query);location=trexsahqt1v:30003 (Errorcode 2029)
If i set only one condition my code is working fine
My code....
for(int i = 0; i < searchParams.length; i++)
IQueryEntry queryEntry = indexCollection.getNewQueryEntry()
if ("createdby".equalsIgnoreCase(searchParams.getPropertyName()))
 queryEntry.setRowType(IQueryEntry.ROW_TYPE_ATTRIBUTE);
 queryEntry.setTermAction(IQueryEntry.TERM_ACTION_EXACT);
 queryEntry.setPropertyName(PropertyName.createCreatedBy());
 queryEntry.setValue("same value")
 queryEntry.setPropertyOperator(IQueryEntry.PROPERTY_OPERATOR_EQUAL);
 queryEntryList.add(queryEntry);
 if ("modifiedby:".equalsIgnoreCase(searchParams.getPropertyName()))
 queryEntry.setRowType(IQueryEntry.ROW_TYPE_ATTRIBUTE);
 queryEntry.setTermAction(IQueryEntry.TERM_ACTION_EXACT);
 queryEntry.setPropertyName(PropertyName.createCreatedBy());
 queryEntry.setValue("same value");
 queryEntry.setPropertyOperator(IQueryEntry.PROPERTY_OPERATOR_EQUAL);
 queryEntryList.add(queryEntry);
Is any "AND" or "OR" operators I have to setup , if yes please let me know how?
Really appreciate your help

Oracle 11g bug for column ambigously defined error

I have below format query running on Oracle 10g without any issues
select col1
from (select col1
from (select 'A' col1
from dual)
) v1
inner join (select col1 as col2
from (select 'A' col1
from dual)
) v2
on (v1.col1=v2.col2);
When I run the exact same query on Oracle 11g I get column ambiguously defined error. But when I change the query to as below it works fine on 11g
select v1.col1
from (select col1
from (select 'A' col1
from dual)
) v1
inner join (select col1 as col2
from (select 'A' col1
from dual)
) v2
on (v1.col1=v2.col2);
Is it because 11g ignores column alias in my inner queries.

I'd tend to agree that this seems to be a bug in 11.1.0.7 (at least, that's the version I'm running it in)
It's not even that Oracle doesn't know about the column aliases, you can remove the aliases in the ON without a problem, i.e.
SELECT v1.col1
   FROM
(SELECT col1 FROM
    (SELECT 'A' col1 FROM dual
) v1
INNER JOIN
(SELECT col1 AS col2 FROM
    (SELECT 'A' col1 FROM dual
) v2
     ON (col1=col2);works fine. Using the old join syntax also seems to work fine
SELECT col1
   FROM
(SELECT col1 FROM
    (SELECT 'A' col1 FROM dual
) v1,
(SELECT col1 AS col2 FROM
    (SELECT 'A' col1 FROM dual
) v2
WHERE (col1=col2);So it appears that something in the SQL 99 parser is broken. Have you logged a bug in Metalink?
Justin

Syntax error in query expression

I am receiving the following error message:
Microsoft][ODBC Microsoft Access Driver] Syntax error
(missing operator) in query expression 'customerid_cus='.
for the following code:
If IsEmpty(Request.Form("company_cus")) Then
rs_company.Source = "SELECT customerid_cus, company_cus FROM
customers_cus WHERE customerid_cus= "&
Request.QueryString("customerid") &" "
Else
rs_company.Source = "SELECT customerid_cus, company_cus FROM
customers_cus WHERE company_cus = '"&
Request.Form("company_cus") &"' "
End If
What could the problem be?

Are you sure that you are passing the querystring customerid
when the form
company_cus is empty.
Paul Whitham
Certified Dreamweaver MX2004 Professional
Adobe Community Expert - Dreamweaver
Valleybiz Internet Design
www.valleybiz.net
"aonefun" <[email protected]> wrote in
message
news:epmf3n$f3u$[email protected]..
>I am receiving the following error message:
>
> Microsoft][ODBC Microsoft Access Driver] Syntax error
(missing operator)
> in
> query expression 'customerid_cus='.
>
> for the following code:
>
> If IsEmpty(Request.Form("company_cus")) Then
>
> rs_company.Source = "SELECT customerid_cus, company_cus
FROM
> customers_cus
> WHERE customerid_cus= "&
Request.QueryString("customerid") &" "
>
> Else
>
> rs_company.Source = "SELECT customerid_cus, company_cus
FROM
> customers_cus
> WHERE company_cus = '"& Request.Form("company_cus")
>
> End If
>
> What could the problem be?
>

SQLException syntax error in query

I am baffled and hoping that maybe you can spot an error in my query - I can't seem to find it!
The query is:
INSERT INTO CreditCard (userID, type, name, number, expiration, addressID) VALUES (5, 1, 'Bill', '1264', 2004-04-10, 9)
And in code it is:
String sql = "INSERT INTO CreditCard (userID, type, name, number," + " expiration, addressID) VALUES (" + userId + ", " + type + ", \'" + name + "\', \'" + number + "\', " + expiration + ", " + addressId + ")";
I keep getting error for this line:
stmt.execute(sql);
with the following message:
java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error in INSERT INTO statement.
at sun.jdbc.odbc.JdbcOdbc.createSQLException(JdbcOdbc.java:6879)
at sun.jdbc.odbc.JdbcOdbc.standardError(JdbcOdbc.java:7036)
at sun.jdbc.odbc.JdbcOdbc.SQLExecDirect(JdbcOdbc.java:3065)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:338)
at jauction.server.CreditCardImpl.<init>(CreditCardImpl.java:65)
at jauction.server.CreditCardTest.main(CreditCardTest.java:14)
Do you spot the syntax error in the query? Is there any other reason why I could be getting this error?
Similar INSERT INTO queries have been implemented and tested in this project of mine and they are working fine. I am baffled as to where the syntax error is in this query. If you spot it - could you point it out? Thanks.

Thanks man, you saved me hours of debugging.
I had an Access table with a column named TimeStamp, just couldn't get the damn thing to work. But I think both our problems are JDBC/SQL related, not Access related. In other words, it wouldn't work on any other RDBMS system either.
Someone should put it in the documentation somewhere that using SQL datatype names for column names is a no-no.

Syntax error on query generation

Hi,
When I try to generate report syntax error occures. It's not a custom code. What do you think about it ?
(syntax error in the following code:
return.
perform Debug_xfems.
See some piece of generated file :
REPORT RSRRNAME.
FORM SELECT_4.
if G_S_QCF-cmess eq rrkg_C_cmess-error.
 perform CU_MESS_send.
endif.
 read Table <G_THX_s> assigning <G_SX_S>
 with table key k = G_SX_s-k.
 if sy-subrc gt 0.
 insert G_SX_S into table <G_THX_S> assigning <G_SX_S>.
 endif.
ENDFORM.
FORM MOVE_Z_SP_0001.
ENDFORM.
return.
perform Debug_xfems.
form check_fems using value(I_fems) type i.
perform I_fems of " REP I_FEMS = 2
 MOVE_Z_SP_0001
 DEBUG_XFems.
endform. " now look at G_TSX_XFems
Thanks in advance.
Fiodar.

Hi,
I would suggest that you check OSS for existing SAP notes on the issue and if you find nothing, please create a SAP customer message.
All the best,
Mike

Oracle Gateway for odbc to transfer CLOB to MySQL longtext type

Hi,
Does gateway supports transferring CLOB datatype to MySQL LONGTEXT. If so, How I can achieve this?
Please post an example.

It will work, but it is tricky as the longtext will be mapped to an Oracle long when using the gateway.
Sometimes a simple solution is to define a view that splits the data into chunks using substr. Also split the target column into chinks using a view an then use the view to transfer the data rather then the original table.
PL/SQL will also work but you need to pay attention to its limitations (64k). You also have to split the data into chunks. Other copy methods like SQL*Plus copy have its limitation. You really have to work out which solution fits for you best here.

Syntax Error In Query

Can someone fix this query for me? I have been at it for an hour and can't locate the rogue error
ISNULL(CAST(CONVERT(DECIMAL(18,4)(COUNT(CASE WHEN soldStatus IN ('Yes', 'Pending') THEN saleTotal ELSE NULL END))) AS FLOAT)/NULLIF(CAST(CONVERT(DECIMAL(18,4),(COUNT(DISTINCT(saleTotal))) AS FLOAT),0),0) As Percentage

Hello Joe,
You should format your T-SQL more proper, then it's easier to read and easier to find mistakes:
ISNULL(CAST(CONVERT(DECIMAL(18,4),
(COUNT(CASE WHEN soldStatus IN ('Yes', 'Pending')
THEN saleTotal
ELSE NULL END))) AS FLOAT)
/NULLIF(CAST(CONVERT(DECIMAL(18,4), COUNT(DISTINCT(saleTotal))) AS FLOAT),0),0) As Percentage
1. First line, there was a comma behind DECIMAL(18,4), missunt
2. Last line, one opening bracket before COUNT to much
Olaf Helper
[ Blog] [ Xing] [ MVP]

Query syntax error after multiprovider change

Hi everyone,
I removed key figures from a multicube, changed a query on top afterwards and saved it. The key figures are no longer in the key figure list of the query in the Query designer, and are no longer used in any place within the query.
Now, I'm getting a syntax error on query execution, since the compiled query still contains a reference to the old key figures. Regeneration via RSRT or saving under a new name doesn't work, and to delete the generated report I need a developer key.
Any ideas?
Regards,
Tilman

Hi Shashank,
thanks for your response.
I did try the "check query" button, it didn't return an error. When executing the query via rsrt, I get a dump due to "Syntax error in program GP48VM7K0MSF08DRO2382A2PSTI ". The program still contains data type references to the removed infoobjects. When checking the program via SE38, you get just that syntax error.
I'm looking for a way to clean these things up. Even when creating a new query on the aggregation level (I was talking about a multiprovider earlier, which is located underneath), the error pops up. I activated all the objects along the way, with no effect.
Regards,
Tilman

Syntax Errors in Recordset, Dreamweaver 8

Hi All!
I'm struggling to figure out Dreamweaver's syntax for a Recordset I'm building. I'm using Dreamweaver 8, ColdFusion 9 to connect with my database, and Windows 7.
I have to start by admitting I copied code from an similar program, and am trying to get it to work for me.
Here's the error I get when I "test" the recordset:
Syntax error. in query expression '1=1
Here's the query:
SELECT LastName, FirstName, MiddleName, Generation, PartyType
FROM [Party Information]
WHERE 1=1
SELECT FullCaseNo, DocketSheet
FROM [Case Information]
WHERE 1=1
<cfif IsDefined("Form.LastName") and Form.LastName NEQ "">
 AND PartyInformation.Last Like'#Form.LastName#%'
</cfif>
<cfif IsDefined("Form.FirstName") and Form.FirstName NEQ "">
 AND PartyInformation.First Like'#Form.FirstName#%'
</cfif>
 <cfif IsDefined("Form.CaseNo") and Form.CaseNo NEQ "">
 AND CaseInformation.FullCaseNo ='#Form.CaseNo#'
</cfif>
ORDER BY LastName, FirstName, MiddleName, FullCaseNo
For the sake of just seeing I deleted "WHERE 1=1" just to see if it would run, and I got another syntax error in the FROM clause. In case this wasn't already obvious I'm brand new to Dreamweaver and just trying to get this thing to work.
Any help is much appreciated, thanks in advance!!

That's sad to hear.
Anyway, if you're continuing to work on this, why dont you try replacing this:
SELECT LastName, FirstName, MiddleName, Generation, PartyType
FROM [Party Information]
WHERE 1=1
with this:
SELECT LastName, FirstName, MiddleName, Generation, PartyType
FROM PartyInformation
WHERE 0=1
WHERE 1=1 is usually a SQL code to prevent injections and to increase performance of the query you're running.
WHERE 0=1 will usually look up all records in the table you're querying into - this is what you're trying to achieve here anyway.
and rename the table on your DB from Party Information to PartyInformation

11g gateway for ODBC returns SYNTAX ERROR on query

Similar Messages

Maybe you are looking for