11ginstall.sh and Oracle 11.2 RDBMS media
Hello
I would lik to install an SAP ECC 5.0 system Linux(last Red Hat)/Oracle (we have to move there existing system on Alpha TRU64 in order to upgrade it)
The wish is to install Oracle 11 supported by 640_EX2 kernel.
I went through notes
: Note 1431800 - Oracle 11.2.0: Central Technical Note
Note 1524205 - Oracle 11.2.0: Database Software Installation(and subnotes)
I am in doubt i can install RDBMS only with 11ginstall.sh (attached to note 1524205).
I already downloaded ORACLE RDBMS 11.2 LINUX x86_64 64 bit Media from SAP Marketplace but the hotes are really confusing me (is ./Runninstaler not ok for Oracle 11?)
Thank you in advance for your help
Hi,
You have to do ORACLE Software Installation through RUNINSTALLER only.
As it mention in Note Script 11ginstall.sh
Description: '11ginstall.sh' is the main script behind RUNINSTALLER and RUNINSTALLER_CHECK. This script supports installation in response file mode (interactive) and silent mode, it generates the response file and starts the Oracle installer. For help on 11ginstall.sh, run the command
Regards,
Nikunj Thaker
Similar Messages
-
Extraction of data from Planning and load it into Oracle/SQL server (RDBMS)
Hi All,
ODI can extract data from Oracle/SQL server RDBMS and load it into Hyperion planning, but I wanted to know if it is possible to extract data from Hyperion Planning through ODI and load it into Oracle or SQL server RDMBS i.e the other way round.
Kindly let me know if that is possible or not,If yes then please let me know what is the exact process to achieve this through ODI.
Thanks & Regrads,
GurpreetYes this can be done. Remember that Planning data is actually stored in Essbase so the Knowledge module you will need to use is LKM Essbase to SQL (DATA)
-
Oracle Forms 9i and Oracle RDBMS 8
Hi,
Can anyone tell me whether Oracle Forms 9i will work against an Oracle 8 database?
We have an older version of Oracle Forms (Oracle Developer 6i) that I could also try against Oracle 8 but I'm concerned about conflicts with on the client-side with Oracle Enterprise Manager 9i and Oracle Enterprise Manager 10g (I have these installed already).
My organization does NOT intend to upgrade the Oracle 8 production database to a newer release. And yes, we have Oracle 9i and 10g RDMBS in production as well.
Thanks.I, too, am a little confused. I will be loading Oracle 9i DB Personal Edition on to a Windows XP Professional, Pentium IV. I read in forums that 9i Personal is certified for this particular system whereas 6i Personal Edition is not. Is Forms and Reports 6i certified for XP Professional? If so, can I run 6i w/ the 9i Personal Edition? I am considering purchasing Oracle 9i Developer Suite, but only if it is certified for XP Pro and 6i isn't.
Please advise.
Alta -
Problem with Linus Ubuntu 7.04 and Oracle-Xe debian package
Hi all,
Installed Oracle 10g XE on my Ubuntu 7.04 using universal Debian Package : oracle-xe-universal_10.2.0.1-1.0_i386.deb. No problem during the installation . After finished the installation, I configured the database to use port 6000 and its password (Listener port set to default).
But when I tried to access the database home page using "http://127.0.0.1:6000/apex", it cannot be accessed. Then I tried to verify my database server using /etc/init.d/oracle-xe status and here's the output:(before it, I make user the database was realy online by typing /etc/init.d/oracle-xe start)
###########################333###
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 09-AUG-2007 22:45:07
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Linux Error: 2: No such file or directory
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=wks-082)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
Linux Error: 110: Connection timed out
then I tried to open the log in /usr/lib/oracle/xe/app/oracle/admin/xe/bdump/alert_XE.log and here is the output
Thu Aug 9 14:54:14 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Thu Aug 9 14:54:27 2007
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
Thu Aug 9 14:54:33 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7532.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7532
Thu Aug 9 14:54:35 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Thu Aug 9 14:54:46 2007
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
Thu Aug 9 14:54:51 2007
Errors in file /usr/lib/oracle/xe/app/oracle/admin/XE/udump/xe_ora_7551.trc:
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
USER: terminating instance due to error 600
Instance terminated by USER, pid = 7551
Thu Aug 9 14:54:53 2007
Are there anyone who can help me? I really have no idea since I'm a newbie here, both linux and oracle. Any hint are welcome, thanks in advance.
Regards,
Rudi SadriaThx for the help, I already verify the /etc/hosts and these are the output:
127.0.0.1 localhost
127.0.0.1 wks-082
127.0.0.1 localhost.localdomain localhost localhost.domain
127.0.0.1 hostname hostname.domain
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
I check the listener status and here's the output:
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 10-AUG-2007 15:14:45
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 10-AUG-2007 15:14:39
Uptime 0 days 0 hr. 0 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
Listener Log File /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=wks-082)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "XE", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
and here's the alert_XE.log
Fri Aug 10 15:30:59 2007
Starting ORACLE instance (normal)
Cannot determine all dependent dynamic libraries for /proc/self/exe
Unable to find dynamic library libocr10.so in search paths
RPATH = /ade/aime1_build2101/oracle/has/lib/:/ade/aime1_build2101/oracle/lib/:/ade/aime1_build2101/oracle/has/lib/:
LD_LIBRARY_PATH is not set!
The default library directories are /lib and /usr/lib
Unable to find dynamic library libocrb10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
Unable to find dynamic library libocrutl10.so in search paths
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:
sessions = 49
__shared_pool_size = 41943040
__large_pool_size = 0
sga_target = 146800640
control_files = /usr/lib/oracle/xe/oradata/XE/control.dbf
__db_cache_size = 96468992
compatible = 10.2.0.1.0
db_recovery_file_dest = /usr/lib/oracle/xe/app/oracle/flash_recovery_area
db_recovery_file_dest_size= 10737418240
undo_management = AUTO
undo_tablespace = UNDO
remote_login_passwordfile= EXCLUSIVE
dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
shared_servers = 4
job_queue_processes = 4
background_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/bdump
user_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/udump
core_dump_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/cdump
audit_file_dest = /usr/lib/oracle/xe/app/oracle/admin/XE/adump
db_name = XE
open_cursors = 300
os_authent_prefix =
pga_aggregate_target = 41943040
PMON started with pid=2, OS id=7328
PSP0 started with pid=3, OS id=7330
MMAN started with pid=4, OS id=7332
DBW0 started with pid=5, OS id=7334
LGWR started with pid=6, OS id=7336
CKPT started with pid=7, OS id=7338
SMON started with pid=8, OS id=7340
RECO started with pid=9, OS id=7342
CJQ0 started with pid=10, OS id=7344
MMON started with pid=11, OS id=7348
MMNL started with pid=12, OS id=7350
Fri Aug 10 15:31:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Fri Aug 10 15:31:01 2007
ALTER DATABASE MOUNT
Fri Aug 10 15:31:01 2007
ORA-00202: control file: '/usr/lib/oracle/xe/oradata/XE/control.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Fri Aug 10 15:31:01 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
and then I open the SQL* plus and type some command
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/nls_lang.sh: 114: [[: not found
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Aug 10 15:32:38 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
Connected.
SQL> select status from v$instance
2 ;
STATUS
STARTED
But I'm still cannot accessed my "http://localhost:6000/apex". Are there any possibilities that my browser block it? or I need to change the port?
Thx a lot for your help
Regards,
Rudi Sadria -
Oracle.sql.BLOB and oracle.sql.STRUCT
I'm development a application in Java with oracle, to manage media files. When I try to insert into oracle , I have this problem "oracle.sql.BLOB cannot be cast to oracle.sql.STRUCT" , and I don't know what that can be ..
This is my code , please help with that.. If you have a smaple code of java and oracle to insert media , that will be a great help ..
public void loadDataFromStream(OracleConnection con)
try {
Statement s = con.createStatement();
OracleResultSet rs = (OracleResultSet)
s.executeQuery("select * from blobs where id='video2.avi' for update ");
String index = "";
while(rs.next())
index = rs.getString(1);
index+="1";
System.out.println("llego hasta aki");
// el error esta en esta linea de abajo ...
OrdVideo vidObj = (OrdVideo) rs.getCustomDatum(2, OrdVideo.getFactory());
//rs.getBfile(3);///
FileInputStream fStream = new FileInputStream("/home/jova/movie.avi");
vidObj.loadDataFromInputStream(fStream);
vidObj.getDataInFile("/home/jova/movie.avi");
fStream.close();
System.out.println(" getContentLength output : " +
vidObj.getContentLength());
OraclePreparedStatement stmt1 =
(OraclePreparedStatement) con.prepareCall("update blob_col set image = ? where id = " + index);
stmt1.setCustomDatum(1,vidObj);
stmt1.execute();
stmt1.close() ;
index+="1";
System.out.println("OK");
catch(Exception e) {
System.out.println("exception raised " + e);
System.out.println("load data from stream unsuccessful");
}I'm development a application in Java with oracle, to manage media files. When I try to insert into oracle , I have this problem "oracle.sql.BLOB cannot be cast to oracle.sql.STRUCT" , and I don't know what that can be ..
This is my code , please help with that.. If you have a smaple code of java and oracle to insert media , that will be a great help ..
public void loadDataFromStream(OracleConnection con)
try {
Statement s = con.createStatement();
OracleResultSet rs = (OracleResultSet)
s.executeQuery("select * from blobs where id='video2.avi' for update ");
String index = "";
while(rs.next())
index = rs.getString(1);
index+="1";
System.out.println("llego hasta aki");
// el error esta en esta linea de abajo ...
OrdVideo vidObj = (OrdVideo) rs.getCustomDatum(2, OrdVideo.getFactory());
//rs.getBfile(3);///
FileInputStream fStream = new FileInputStream("/home/jova/movie.avi");
vidObj.loadDataFromInputStream(fStream);
vidObj.getDataInFile("/home/jova/movie.avi");
fStream.close();
System.out.println(" getContentLength output : " +
vidObj.getContentLength());
OraclePreparedStatement stmt1 =
(OraclePreparedStatement) con.prepareCall("update blob_col set image = ? where id = " + index);
stmt1.setCustomDatum(1,vidObj);
stmt1.execute();
stmt1.close() ;
index+="1";
System.out.println("OK");
catch(Exception e) {
System.out.println("exception raised " + e);
System.out.println("load data from stream unsuccessful");
} -
Error Installing CE 7.2 on WIndows 2008R2 and Oracle 11 g2
During the install of the Database Instance at RDMS Client Oracle selection page even after selecting the correct version of Oracle client down loaded form SAP following message is displayed:
You entered: I:\source-sap\51038966-ORACLE-Client-112\OCL_WINDOWS_X86_64
Found the label ORACLE:11.2:CLIENT:Oracle Client 11.2.0.2 V1:WINDOWS_X86_64:AMD64:CD51030xxx but need the label ORACLE:10.0G:CLRDBMS::WINDOWS_X86_64:**
Would be grateful if anybody can suggest a solution. Have not been able to find anything about this in SAP notes or SDN for Windows and Oracle 11.2 g
Thanks
T.K.Hi Tarek,
I hope you might have resolved this issue by now.
Solution:
This issue seems that you have not given the correct path of the "Oracle Client" which will be 10.0G, rather giving the oracle software location of Oracle 11.2G. You need to download Oracle client 10G from marketplace from the same place where you have downloaded the master DVD installation media and provide this path.
Best Regards,
Tushar Rathi -
Compare SQL Server and Oracle syntax
Hello, I am very new to the Oracle DB as I have been working with MS SQL Server for many years. I have a SQL statement that works fine in MSSQL but seems to not work in Oracle. Is this a syntax problem or do I need to look elsewhere?
DECLARE @as_master_key varchar(26)
EXEC [dbo].[GET_UNIQUE_MASTER_KEY]
@as_project_name = N'CMDEMO',
@as_database_site = N'CMPL',
@as_user_initials = N'SK',
@as_table = N'SUBMITTAL_CATEGORY',
@as_master_key =
@as_master_key
OUTPUT SELECT @as_master_key as N'master_key'
This is what I use in MSSQL and it works fine - but I am porting this application to an Oracle backend and it fails. Any suggestions?
Thanks in advance to this newbie. :)SQL Server and Oracle are two completely different RDBMS'.
You'd be best not to try and port SQL Server code to Oracle SQL or PL/SQL directly as it will not favour the power of Oracle's features correctly.
I'm not sure what your code is supposed to be doing (I find SQL Server code awful to read, and never understand the need for "@" before variable names, that just seems to show a lazy parser (or lazy coder who designed the parser)).
From what I can guess it's going to be something like...
SQL code...
create or replace sequence my_master_key;PL/SQL code...
DECLARE
as_master_key number;
as_project_name varchar2(20) := 'CMDEMO';
as_database_site varchar2(20) := 'CMPL';
as_user_initials varckar2(5) := 'SK';
as_table varchar2(30) := 'SUBMITTAL_CATEGORY';
BEGIN
select my_master_key.nextval
into as_master_key
from dual;
-- In 11g you could replace this select with just:
-- as_master_key = my_master_key.nextval;
END;This get's a unique sequence value into a variable and declares all the other variables. What you want to do with them after that I don't know. -
Connection Errors between Oracle 8 Client and Oracle 8.1.6 EE
Our current application has been developed using PowerBuilder 6.5 and Oracle 8.1.5. Since PB 6.5 does not have a "native driver" for 8.1.5, we have used their driver for Oracle 8.0.5 for Net8 connectivity to the server. Everything works fine.
Recently, I downloaded the current version of Oracle 8.1.6 EE from Technet to try out the compatibilty of our software with the next version of 8I, it failed. The error seems to be somewhere between the 8.0.5 Oracle Client Software and the downloaded Oracle 8.1.6 EE Server software. Some how we have lost the ability to declare cursors. I tried declaring a cursor in a procedure through SQL*Plus and it failed their as well. I have even tried the Oracle 8.0.6 Client, with same results.
Has anyone seen this? If so, what should I do?
Thanks,
JasonHOW TO SUPPORT TWO-TASK COMMON ERRORS - 1012295.102
Troubleshooting
===============
Two-task common errors are generally RDBMS related issues, but could be caused by a problem with SQL*Net, or an application (i.e. Pro*C).
ORA-03106
======== Possible reasons for the ORA-03106 errors include:
1. Incompatibilities between the client application and the RDBMS server.
For example, version incompatibilities, or a client trying to use a feature not supported by the database kernel.
2. When using database links or gateways.
3. Network or SQL*Net problems.
4. Corruptions.
5. PL/SQL - language related.
check the NLS_LANG variable on the client and server. -
Hello all,
When using brtools, the following error pops up. Appreciate if you could share some hints. thanks.
> brtools
BR0651I BRTOOLS 7.00 (43)
BR0252E Function stat() failed for '/oracle/QAA/102_64/rdbms/admin/log' at location BrFileStatGet-1
BR0253E errno 13: Permission denied
BR0273E Determination of file status for /oracle/QAA/102_64/rdbms/admin/log failed
BR0280I BRTOOLS time stamp: 2010-05-07 14.20.41
BR0654I BRTOOLS terminated with errors
Kind regards
Raymond>
Raymond Yuan wrote:
> BR0252E Function stat() failed for '/oracle/QAA/102_64/rdbms/admin/log' at location BrFileStatGet-1
> BR0253E errno 13: Permission denied
>
Hello,
now this message is pretty obvious. So the needed information would be:
ls -ld /oracle/QAA/102_64/rdbms/admin
ls -ld /oracle/QAA/102_64/rdbms/admin/log
ls -ld brtools
id
and then compare if the user executing brtools has appropiate rights.
Most likely you did not run saproot.sh so brtools might not be set suid to oraqaa
and you are executing as qaaadm.
Best regards
Volker -
I have to migrate a DWH on Server 1 (OWB 9.0.4.10, Oracle Workflow 2.6.2, Windows 2000, Oracle 9.2.0.6) to Server 2 1 (OWB 9.0.4.10, Oracle Workflow 2.6.3, Windows 2003, Oracle 10.2.0.1)
Its posible to use OWB 9.0.4.10 with W2003 and Oracle 10.2.0.1?
Thanks very much in advance!Hi,
This is the relevant section from Metalink's 'Certify' section:
Server Certifications
Product Server Status Addtl. Info. Components Other Issues
10.1.0.x 9.2.0.x Certified None None Yes None
10.1.0.x 8.1.7 (8i) Desup:RDBMS None None N/A N/A
10.1.0.x 10.2.0.x Certified Yes None Yes None
10.1.0.x 10.1.0.x Certified None None Yes None
Additional info on 10gR2 DB: Database 10.2.0.x is only certifed with Oracle Warehouse builder patch set 10.1.0.4 or higher.
So: bad luck, need to upgrade OWB 10.1.0.4 to at least.
I suggest you learn to use Metalink for having these kinda questions answered.
Good luck,
Erik Ykema -
Power builder 6.5 and oracle 8.1.7
dear friends
I am using powerbuilder as front end and oracle as backend and extensively depend on Oracle stored procedures result set values for my datawindows.But i amd facing a problem .The problem being that i connect to ORACLE from Powerbuilder using SQLCA using and ini file .Now if i open the data window the window opens without any error and result are displayed> but i disconnect and again connect using SQLCA and try to open a datawindow attatched to the stored procedures returning the result set i throws me an error that WRONG noof argumnets in call to procedure_name.
If any one has a solution for this please help me
Thanking you all
MUNISH GUPTAFilippo,
Probably the clntsh lib has been damaged in some copying action (FTP in ASCII
mode?).
The linker noticed at least that it does not have the Executable and Linking Format
(ELF) that it is supposed to have.
Winfried Scheulderman
Filippo Timpone <[email protected]> wrote:
Hello,
we need to call a Tuxedo Service from inside an Oracle (8.1.7) Pl/Sql
block.
We just have the C function that call the Tuxedo service but when we
try to perform the "Make -f" instruction the following error is fired:
make -f $ORACLE_HOME/rdbms/demo/demo_rdbms.mk extproc_callback SHARED_LIBNAME=client_plsql.so
OBJS=client_plsql.o
ld -b -L/appl/oracle8.1.7/product/8.1.7/lib -L/appl/oracle8.1.7/product/8.1.7/lib/
-L/appl/oracle8.1.7/product/8.1.7/rdbms/lib/ -o client_plsql.so client_plsql.o
/appl/oracle8.1.7/product/8.1.7/lib/nautab.o /appl/oracle8.1.7/product/8.1.7/lib/naeet.o
/appl/oracle8.1.7/product/8.1.7/lib/naeca
ld: Mismatched ABI (not an ELF file) for -lclntsh
Fatal error.
*** Error exit code 1
Stop.
How can we solve the problem?
Thanks in advance,
Filippo -
46c with 46d_ext kernel sles and oracle platform question
Dear sap on linux community,
I currently have R/3 4.6c with 46d_ext kernel running on sles8 and ora 9204 (all 32-bit)
As part of an upgrade project I want to move current system to sles10 and oracle 10 (all 64-bit). I am using that note as a starting point.
According to the note oracle 9 client is required with ora10 db ?
Why is this ?
This leads to some conflicting results from pam.
pam states that it is supported to run ora10 64-bit on sles10.
But as far as I know it is not suported to install ora9 client on sles10.
Please explain.
Do I need a db server with sles10ora10 and a ci app server with sles9ora9 ?
Rgds, Eirikur.Hello,
I strongly recommend you to take a look at the note <a href="http://service.sap.com/sap/support/notes/521230">521230: FAQ: Client software 9i or earlier on UNIX</a>
The oracle client to be used on a SAP system running on UNIX depends on the <b>KERNEL</b>
You are upgrading
- Your OS ( from SLES 8 to 10 )
- Your Oracle DB ( from 9i to 10g )
Your kernel is NOT changing, therefore the oracle client still is the same as before.
NOTE. Even when the oracle client still is 9i, you must have version 9.2.0.7 or 9.2.0.8
Please, do not confuse the oracle client version (9i) with the RDBMS version (10g)
There is no conflict with PAM. PAM talks about RDBMS version, not about client versions.
At the end you will have a DB server running oracle 10g (RDBMS) and CI/AS runing kernel 46D_EXT with Oracle <b>CLIENT</b> 9i -
How to clone 11gr2 grid and oracle homes
Hi,
By mistake I have installed the software and the database under the same disk /u01. I should had installed the software under /u02 and the database + grid infrastructure for standalone server + Oracle restart under /u01.
My database is 11gR2 on Linux Redhat server.
I have installed Grid Infrastructure for standalone server and the database in /u01.
How can I clean clone all these components from /u01 to /u02? I mean the components are:
- Grid Infrastructure for standalone server under grid user.
- Oracle Restart under grid user.
- Oracle software and Oracle database.
Thank yougjilevski1 wrote:
Hi,
You can clone everything from GI to RDBMS home.
For GI cloning look for clone.pl at section 4
Oracle® Clusterware
Administration and Deployment Guide
11g Release 2 (11.2)
For 11gR2
http://download.oracle.com/docs/cd/E11857_01/em.111/e12255/oui6_cloning.htm
Regards,
Edited by: gjilevski1 on Jun 24, 2011 3:42 PMYou meant section 3 I think http://download.oracle.com/docs/cd/E14072_01/rac.112/e10717/new_clonecluster.htm
What about desinstalling everything : grid infrastructure, Oracle restart , Oracle homes, databases.
I have seen some users of this forum complaining of the errors from the de installer.
can I simply use the Deinstallation Tool downloaded from the OTN and then in ORDER:
1- Remove the Oracle database home under Oracle User:
./deinstall -home /u01/app/oracle/product/11.2.0/db_1
2- Remove the grid install under the grid user:
./deinstall -home /u01/app/11.2.0/grid
Any idea please?
Thank you -
GUIDE: Oracle VM VirtualBox and Oracle Linux NIC bonding
Author: Dude
Date: 01-Jun-2013
Version: B
Last updates:
23-Jul-2013, changes required due to forum upgrade
The following is provided in the hope that it might be useful. If you wish to use it for the purpose of reference, presentation or education, please include the link or information to this forum posting. Thank you!
What is Linux network interface bonding? Simply put, the Linux system provides a kernel driver, which can create a logical network device (bond) using 2 or more Network Interface Controllers (NIC) to accomplish link-aggregation and adapter fault-tolerance. For more information, please see the Deployment Guide at https://linux.oracle.com/documentation/
The channel bonding interface supports several modes of operation. In a typical active-backup set up for fault-tolerance, the system performs MII-based health monitoring of the network interface slaves (eth0, eth1) and assigns them according to bond options and interface availability. In active-backup mode (mode 1), only the current active network device is seen externally.
Linux bonding for fault-tolerance under Oracle VM VirtualBox does not seem to function as advertised. Searching the Internet for more information shows that other people have tried to set up Linux bonding using various virtualization products, virtual host network adapter and bonding options, but without success.
It appears the management of Media Access Control addresses (MAC) interferes with internal routing methods between the host and the virtual machine guest. Using the modinfo bonding command (fig. 1) shows a listing of available parameters for the bonding kernel module. The fail_over_mac parameter addresses the Mac address issue in VirtualBox.
Fig.1
# modinfo bonding
filename: /lib/modules/2.6.39-400.17.1.el6uek.x86_64
/kernel/drivers/net/bonding/bonding.ko
parm: fail_over_mac:For active-backup,
do not set all slaves to the same MAC;
0 for none (default), 1 for active, 2 for follow (charp)
Configuration Example
Virtualization Product: Oracle VM VirtualBox 4.2.10
VM Guest OS: Oracle Linux 6.4 (x64)
VM adapter settings: Bridged Adapter, Paravirtualized Network (virtio-net)
Adapter1 (eth0): 080027436617, en0, Ethernet 1
Adapter2 (eth1): 08002708F36A, en0, Ethernet 1
Note: If you wish to reset the network adapter names and MAC addresses used by the Oracle Linux guest system, erase the content of /etc/udev/rules.d/70-persistent-net.rules and restart the virtual machine.
1. Create or modify the following configuration files:
/etc/modprobe.d/bonding-eth0_eth1.conf
alias bond0 bonding
/etc/sysconfig/network-scripts/ifcfg-bond0
DEVICE=bond0
IPADDR=10.0.2.12
NETMASK=255.0.0.0
GATEWAY=10.0.0.138
DNS1=10.0.0.138
DNS2=8.8.8.8
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
BONDING_OPTS="mode=1 miimon=100 fail_over_mac=1"
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
USERCTL=no
/etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
BOOTPROTO=none
ONBOOT=yes
MASTER=bond0
SLAVE=yes
USERCTL=no
2. Restart the system or network services (root):
Fig. 2
# service network restart
Configuration Test
Enter the following commands as user root to verify proper operation of NIC bonding:
Fig. 3
# tail /var/log/messages
bond0: setting mode to active-backup (1).
bond0: Setting MII monitoring interval to 100.
bond0: Setting fail_over_mac to active (1).
bond0: Adding slave eth0.
bond0: making interface eth0 the new active one.
bond0: first active interface up!
bond0: enslaving eth0 as an active interface with an up link.
bond0: Adding slave eth1.
bond0: enslaving eth1 as a backup interface with an up link.
Fig. 4
# ifconfig
bond0 Link encap:Ethernet HWaddr 08:00:27:43:66:17
inet addr:10.0.2.12 Bcast:10.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::a00:27ff:fe43:6617/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
eth0 Link encap:Ethernet HWaddr 08:00:27:43:66:17
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
eth1 Link encap:Ethernet HWaddr 08:00:27:08:F3:6A
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
Fig. 5
# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 10.0.0.138 0.0.0.0 UG 0 0 0 bond0
10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 bond0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 bond0
Fig. 6
# ifconfig eth0 down
# tail /var/log/messages
bond0: link status definitely down for interface eth0, disabling it
bond0: making interface eth1 the new active one.
# ifconfig
bond0 Link encap:Ethernet HWaddr 08:00:27:08:F3:6A
inet addr:10.0.2.12 Bcast:10.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::a00:27ff:fe43:6617/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
eth1 Link encap:Ethernet HWaddr 08:00:27:08:F3:6A
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
Fig. 7
# ifconfig eth0 up
# ifconfig eth1 down
# tail /var/log/messages
bond0: link status definitely up for interface eth0, 4294967295 Mbps full duplex.
bond0: link status definitely down for interface eth1, disabling it
bond0: making interface eth0 the new active one.
# ifconfig
bond0 Link encap:Ethernet HWaddr 08:00:27:43:66:17
inet addr:10.0.2.12 Bcast:10.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::a00:27ff:fe43:6617/64 Scope:Link
UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1
eth0 Link encap:Ethernet HWaddr 08:00:27:43:66:17
UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1
During the above test, the client network connection from host 10.0.0.1 (ssh) was maintained without any noticeable interruption. As it can be seen from the syslog and ifconfig command output, the bond0 interface was automatically assigned either the MAC address of eth0 or eth1 and the fail-over worked as advertised.
Good luck!Please see these docs/links.
Using Oracle VM with Oracle E-Business Suite Release 11i or Release 12 [ID 465915.1]
Certified Software on Oracle VM [ID 464754.1]
Oracle VM Templates -- Oracle E-Business Suite 12.1.3 (32-bit), Oracle E-Business Suite 12.1.1 (64-bit and 32-bit) and Oracle E-Business Suite Release 12.X Sparse Middle Tier (32-bit)
http://www.oracle.com/technetwork/server-storage/vm/ebs-093153.html
E-Business Suite 12.1.3 Templates for Oracle VM Now Available
http://blogs.oracle.com/stevenChan/2010/11/ebs1213_oraclevm.html
Live Migration of EBS Services Using Oracle VM
http://blogs.oracle.com/stevenChan/2010/01/ebs_live_migration_ovm.html
Using Oracle VM with Oracle E-Business Suite Virtualization Kit
http://blogs.oracle.com/stevenChan/2009/12/oracle_vm_ebs_virtualization_kit.html
New Oracle® VM Templates for Oracle Applications Now Available
http://www.oracle.com/us/corporate/press/068341
Very Cool! New Oracle VM Templates for Oracle E-Business Suite
http://blogs.oracle.com/virtualization/2010/11/very_cool_new_oracle_vm_templa.html
Thanks,
Hussein -
How should I try out Oracle Grid and Oracle database?
I want to try out Oracle Grid and Oracle database in a virtualized test environment. I have already downloaded the Oracle VM VirtualBox for Windows platform. The OS for the production environment is RHEL. So, do I just need to download Oracle Linux? How about the VM Manager, VM Server, and Oracle programs?
You can use the standard distribution media from http://www.oracle.com/technetwork/indexes/downloads/index.html and https://edelivery.oracle.com/linux to install Oracle Linux and Oracle 11g in Virtualbox. Virtualbox can use real disk media as well as .iso disk image files. Oracle Linux 6 is not certified for any Oracle database product yet. Your best option will be to install Oracle Linux 5.7 and then install the Oracle-Validated software package to prepare Oracle Linux for the Oracle database installation.
Virtualbox and Oracle VM are different products. Oracle VM, including OVM server and manager installs its own operating system and is designed for installations on bare metal machines. Virtualbox is an application that requires a primary host OS, e.g. Windows, MacOSX, Linux, to install one or more virtual machines with Windows or Linux guest systems.
Maybe you are looking for
-
Audio Midi Setup not responding
Hello Experts, I have the following problem: My Audio MIDI Setup is not responding. It starts but I have no control over it and have to force quit it to exit the application. I have audio but I can't launch Logic Pro, Djay etc. PLS HELP!
-
HT1391 how do i authorize my computer for my purchases
My computer crashed and I had it rebuilt. I am trying to use my itunes purchases but it is asking me to authorize my computer. How do I do this?
-
How to Position image in h:dataTable in Row and Column ?
I have a code that loops from array and populate images, here is the code below <h:dataTable border="0" id="dataTable" columnClasses="onleft adjustImage, ontop albumDescription adjustImage" rows="0" value="#{album.allImageInAlbum}" var="name" style="
-
Script to remove Adobe Acrobat Standard XI
Denis Kelley wrote: When I run into problem programs like that, I use the Microsoft FixIt Utility and have had 100% success ripping stuff out. Good point, I forgot about that...
-
Usually we go to sxmb_moni_bpe >> Continue Process Following Error to restart failed BPMs. Is there a standard job that can be scheduled to do this for us i.e restart failed bpms.