123reg and mobile me
I have acquired an co.uk domain name from 123REG (which is basically my name) and have also designed a website using iweb which looks pretty good.
However what I really want to do now is to use the co.uk address and link this to the mobile me website address so anyone can search using my name rather than remember the mobile me address.
Is this possible and if so how?
The forwarding will not work unless you configure it as Ricky has told you.
Did you read his post? It is just that what you have typed is actually nothing like the same as he typed in his!
It should be www CNAME web.me.com.
You DO NOT need to enter the full domain name as the www represents this, so all you need to do is enter www followed by CNAME and then this should be forwarded to web.me.com.
There might be the option of forwarding @ CNAME web.me.com as well.
The @ represents your domain name which would be http://domain.com and the www represents your sub-domain name which would be http://www.domain.com.
Do this exactly as stated and it should all work.
Similar Messages
-
My Outlook/iCloud calendar invites to others appear to work on my end and sync with my PC and mobile, but when other people "accept" the invite, it will not populate/add in to their calendar. How can I fix this without turning off iCloud?
I am at a new office that uses Outlook (not Outlook Exchange) which does not sync with my mobile... I just got iCloud set up on my PC to sync my contacts, calendar, reminders, etc... The sync worked (not without flaws, but the other issues seem solvable... I think), so that i can now see all my appointments on both my phone and on my PC. The problem I am having is that iCloud moved all of my calendar items from Outlook into iCloud calendar and now when I send out meeting/calendar invites the recipients may accept them, but the meeting does not get added to their calendar. This is a huge problem and may mean that i need to turn off iCloud.
Does anyone know how to fix this?
Thanks!I am replying to my own post here as I seem to have fixed the problem.
I do have some calendars that are shared. Some of those are shared with users who have time zone support turned on. So i activated time zone support on my iphone, then deleted my icloud subscription. I then signed in to icloud again and voila... problem solved.
It is a weird one as the other calendar views were always fine and when you opened an event that appeared in the wrong day (on list view), the correct date of the event was shown in the information...
one more bug in a complicated system I guess -
Just setup Jabber (9.0.2) on iphone with Mobile Connect (CUCM 7.1.5). I run into incoming call issue where both Jabber & mobile phone would rings about the same time. I did some of research and Cisco doco below state Mobile Connect should automatically inactivated when Jabber is running and connected to the corporate network.
Anyone has this issue or could point me to the right direction?
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/9.0/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_011.html#CJAB_TK_ADA0EB97_00
Add Mobile Connect and Mobile Identity
Mobile Connect, formerly known as Single Number Reach (SNR), allows the native mobile phone number to ring when someone calls the office number while Cisco Jabber is not available.
When Cisco Jabber is running and connected to the corporate network, and thus available to receive VoIP calls, Mobile Connect is automatically inactivated.
The user requires a Mobile Identity to transfer Cisco Jabber VoIP calls to the mobile voice network.Remote Destinations will always ring, regardless of whether the TCT device is registered or not. A Mobile Identity will not ring when the TCT device is registered to CUCM. This is especially important as you don't want the cellular phone and the wifi phone app contending for the user to click answer on both on the same device. You may still want to use RDP if the user has a home office in addition to their smartphone.
-
Two weeks ago I was updating my iPhone 4 to the new software. As soon as it was done it sent my phone into recovery mode. I talked to apple support line four times and they could not figure it out. I got frustrated after two days of
Not being able to use my phone and went to the apple store and had them restore it. When that happened it of
Course deleted all my stuff on my phone. When I was talking to apple support on the phone they told
Me that my computer was not downloading mobile me or apple mobile support. I've never had problems before until I tried updating it. So now Ive tried
Reinstalling iTunes and my computer will not dl mobile me or apple mobile support. I went to their support online and followed some
Of their stuff to try to fix and disabled Something and it told me to restart my computer and so I did and now I can't find the page where it was giving me the directions for it bc when I disabled programs it somehow disabled to where I can't get on the Internet. My phone works fine now just don't have my numbers, music, apps, ringtones pictures etc. The problem is now my computer, iTunes, my Internet connection, and mobile me and apple mobile software. Please help!rjnorred wrote:
.... If I restore the phone in iTunes, will I be able to get to my Cloud data?
When Prompted in the Restore process... Choose Restore from iCloud Backup...
Full Details here > http://support.apple.com/kb/HT1414 -
Menu button works on pc but not on tablet and mobile
Hi! I've made a desktop site and I've published it. Everything works on a pc browser but into tablet and mobile, there is a button on a menu that doesn't work..the link to the rest of the site doesn't start. Maybe because that link goes to a part of the site that is too heavy (the structure under that button goes to 30 different pages)?
This is the url:
http://www.babylove2000.com/
If you try to visit the site by tablet or mobile, you cannot enter in the section 'MARCHI' trough the correspective button. The other buttons work correctly.
Thanks,
Marianna -
Question about bluetooth communication between PC and mobile device
I am a newbie of bluetooth communication. This time I need to have connumication between PC and mobile device (mainly mobile phone) by sending strings. PC is acted as server and mobile device act as client.
For using bluetooth in PC, I use bluecove 2.0.1
I have already connected them successfully.
When I want to send strings between them, it is found that it can only do one cycle of communication (client -> server -> client).
For my design, they can communicate multiple times.
I simulate the core class of the system, the performance is fine.
Cound anyone help me to watch the code and give me some advices?
Server Side - ServerBox.java
public class ServerBox implements Runnable {
LocalDevice localDevice;
StreamConnectionNotifier notifier;
ServiceRecord record;
boolean isClosed;
ClientProcessor processor;
CMDProcessor cmd;
MainInterface midlet;
private static final UUID ECHO_SERVER_UUID = new UUID(
"F0E0D0C0B0A000908070605040302010", false);
public ServerBox(MainInterface midlet) {
this.midlet = midlet;
public void run() {
boolean isBTReady = false;
try {
localDevice = LocalDevice.getLocalDevice();
if (!localDevice.setDiscoverable(DiscoveryAgent.GIAC)) {
midlet.showInfo("Cannot set to discoverable");
return;
// prepare a URL to create a notifier
StringBuffer url = new StringBuffer("btspp://");
url.append("localhost").append(':');
url.append(ECHO_SERVER_UUID.toString());
url.append(";name=Echo Server");
url.append(";authorize=false");
// create notifier now
notifier = (StreamConnectionNotifier) Connector.open(url.toString());
record = localDevice.getRecord(notifier);
isBTReady = true;
} catch (Exception e) {
e.printStackTrace();
// nothing to do if no bluetooth available
if (isBTReady) {
midlet.showInfo("Initalization complete. Waiting for connection");
midlet.completeInitalization();
} else {
midlet.showInfo("Initalization fail. Exit.");
return;
// produce client processor
processor = new ClientProcessor();
cmd = new CMDProcessor();
// start accepting connections then
while (!isClosed) {
StreamConnection conn = null;
try {
conn = notifier.acceptAndOpen();
} catch (IOException e) {
// wrong client or interrupted - continue anyway
continue;
processor.addConnection(conn);
// activate the set up of process
public void publish() {
isClosed = false;
new Thread(this).start();
// stop the service
public void cancelService() {
isClosed = true;
midlet.showInfo("Service Terminate.");
midlet.completeTermination();
// inner private class for handling connection and activate connection handling
private class ClientProcessor implements Runnable {
private Thread processorThread;
private Vector queue = new Vector();
private boolean isOk = true;
ClientProcessor() {
processorThread = new Thread(this);
processorThread.start();
public void run() {
while (!isClosed) {
synchronized (this) {
if (queue.size() == 0) {
try {
// wait for new client
wait();
} catch (InterruptedException e) { }
StreamConnection conn;
synchronized (this) {
if (isClosed) {
return;
conn = (StreamConnection) queue.firstElement();
queue.removeElementAt(0);
processConnection(conn);
// add stream connection and notify the thread
void addConnection(StreamConnection conn) {
synchronized (this) {
queue.addElement(conn);
midlet.showInfo("A connection is added.");
notify(); // for wait() command in run()
// receive string
private String readInputString(StreamConnection conn) {
String inputString = null;
try {
DataInputStream dis = conn.openDataInputStream();
inputString = dis.readUTF();
dis.close();
} catch (Exception e) {
e.printStackTrace();
return inputString;
private void sendOutputData(String outputData, StreamConnection conn) {
try {
DataOutputStream dos = conn.openDataOutputStream();
dos.writeUTF(outputData);
dos.close();
} catch (IOException e) {
// process connecion
private void processConnection(StreamConnection conn) {
String inputString = readInputString(conn);
String outputString = cmd.reactionToCMD(inputString);
sendOutputData(outputString, conn);
/* try {
conn.close();
} catch (IOException e) {}*/
midlet.showInfo("Client input: " + inputString + ", successfully received.");
}For "CMDProcessor" , it is the class of message processing before feedback to client.
Client side - ClientBox.java
public class ClientBox implements Runnable, CommandListener{
StringItem result = new StringItem("","");
private DiscoveryAgent discoveryAgent;
private String connString;
private boolean isClosed = false;
private boolean boxReady = false;
StreamConnection conn;
private static final UUID ECHO_SERVER_UUID = new UUID( "F0E0D0C0B0A000908070605040302010", false);
Form process = new Form("Process");
ClientInterface midlet;
public ClientBox(ClientInterface mid){
this.midlet = mid;
process.append(result);
process.addCommand(new Command("Cancel",Command.CANCEL,1));
process.setCommandListener(this);
new Thread(this).start();
public void commandAction(Command arg0, Displayable arg1) {
if(arg0.getCommandType()==Command.CANCEL){
isClosed = true;
midlet.notifyDestroyed();
public synchronized void run() {
LocalDevice localDevice = null;
boolean isBTReady = false;
/* Process Gauge screen */
midlet.displayPage(process);
Gauge g=new Gauge(null,false,Gauge.INDEFINITE,Gauge.CONTINUOUS_RUNNING);
process.append(g);
showInfo("Initalization...");
System.gc();
try {
localDevice = LocalDevice.getLocalDevice();
discoveryAgent = localDevice.getDiscoveryAgent();
isBTReady = true;
} catch (Exception e) {
e.printStackTrace();
if (!isBTReady) {
showInfo("Bluetooth is not avaliable. Please check the device.");
return;
if(!isClosed){
try {
connString = discoveryAgent.selectService(ECHO_SERVER_UUID, ServiceRecord.NOAUTHENTICATE_NOENCRYPT, false);
} catch (BluetoothStateException ex) {
ex.printStackTrace();
else return;
if (connString == null) {
showInfo("Cannot Find Server. Please check the device.");
return;
else showInfo("Can Find Server, stand by for request.");
boxReady = true;
/* True if the clientbox is ready */
public boolean getBoxReady(){
return boxReady;
/* True if the clientbox is closed in run() */
public boolean getIsClosed(){
return isClosed;
public String accessService(String input) {
String output = null;
try {
/* Connect to server */
StreamConnection conn = (StreamConnection) Connector.open(connString);
/* send string */
DataOutputStream dos = conn.openDataOutputStream();
dos.writeUTF(input);
dos.close();
/* receive string */
DataInputStream dis = conn.openDataInputStream();
output = dis.readUTF();
dis.close();
} catch (IOException ex){
showInfo("Fail connect to connect to server.");
return output;
private void showInfo(String s){
StringBuffer sb=new StringBuffer(result.getText());
if(sb.length()>0){ sb.append("\n"); }
sb.append(s);
result.setText(sb.toString());
}Client side - ClientInterface.java
public class ClientInterface extends MIDlet implements Runnable, CommandListener{
private ClientBox cb = new ClientBox(this);
private Form temp = new Form("Temp");
private Command select = new Command("Select", Command.OK, 1);
private Command back = new Command("Back", Command.BACK, 1);
Alert alert;
String[] element;
String out;
List list;
public void run(){
/* Send message and get reply */
out = cb.accessService("Proglist");
element = split(out,",");
/* Use the reply to make list */
list = createList(element[0], List.IMPLICIT, out);
list.addCommand(select);
list.addCommand(back);
list.setCommandListener(this);
Display.getDisplay(this).setCurrent(list);
public void startApp() {
System.gc();
waitForBoxSetUp(); /* Recursively check for clientbox status */
new Thread(this).start();
public void pauseApp() {
public void destroyApp(boolean unconditional) {
notifyDestroyed();
public void displayPage(Displayable d){
Display.getDisplay(this).setCurrent(d);
private void waitForBoxSetUp(){
while(!cb.getBoxReady()){
if(cb.getIsClosed())
notifyDestroyed();
public void commandAction(Command c, Displayable d){
if (c.getCommandType() == Command.OK){
if (d == list){
/* Send the choice to server */
out = cb.accessService(list.getString(list.getSelectedIndex()));
alert = new Alert("Output", "selected = "+out, null, AlertType.ALARM);
alert.setTimeout(2000);
Display.getDisplay(this).setCurrent(alert,list);
if (c.getCommandType() == Command.BACK){
notifyDestroyed();
public void showWarning(String title, String content){
alert = new Alert("Output", "selected = "+list.getString(list.getSelectedIndex()), null, AlertType.ALARM);
alert.setTimeout(3000);
Display.getDisplay(this).setCurrent(alert,list);
private List createList(String name, int type, String message){
List temp;
String[] source = split(message,",") ;
temp = new List(name, type, source, null);
return temp;
private static String[] split(String original,String regex)
int startIndex = 0;
Vector v = new Vector();
String[] str = null;
int index = 0;
startIndex = original.indexOf(regex);
while(startIndex < original.length() && startIndex != -1)
String temp = original.substring(index,startIndex);
v.addElement(temp);
index = startIndex + regex.length();
startIndex = original.indexOf(regex,startIndex + regex.length());
v.addElement(original.substring(index + 1 - regex.length()));
str = new String[v.size()];
for(int i=0;i<v.size();i++)
str[i] = (String)v.elementAt(i);
return str;
}i haven't worked with devices but only with the toolkit emulators;
it definitely is possible...
u have to send the image as a bytestream and receive the image at the jsp end...
and then reconstruct the image.
the Stream classes in J2ME AND J2SE are all u will require.
also the Image class.
i have not done this but i have successfully sent an image frm a jsp and displayed it on the emulator. -
Right way to copy desktop version for tablet and mobile
Watching this video http://tv.adobe.com/watch/muse-feature-tour/adobe-muse-designing-for-mobile-devices/
would seem that copying from the desktop version to tablet or mobile, you copy all the contents (texts, images,slide shows etc..).
But i doesn't work. May I have to totally rebuild manually tablet and mobile versions or is possible copy the entire site and then, if i need , make changes in each release?
many thanks in advanceSad! Could be of great help for us develop the function to automatically copy all the contents.
We would avoid to rebuild the site 3 times and we would re-design only things to change.
Many thanks for your reply -
Can I use a domain for one site and mobile me for a different site?
Can I use a domain for one site and mobile me for a different site?
I have two sites, I would like to have up and I would like to do one through a domain and one through mobileme is this possible?Yes you can. You can use the CNAME method of forwarding for the first site (the top site in iWeb) and use the MMe URL for your account for the other site: http://web.me.com/YourAccount_Name/SiteName/
OT -
Contacts and Calendar suddenly vanished from my new I phone and Mobile Me
I set up my new iphone and mobile me account this morning with no problems. I used the phone, contacts, and calendar with no problem for about three hours and then all of my contacts and calendar entries vanished. I have backed both up from my PowerBook. Any thought on what happened and how to prevent?
I figured out my problem. When I set up my accounts on my phone I had a .mac and a .me account and made the mistake of having sync turned on with both. When I figured out that my PowerBook was syncing with the .mac account I turned off the .me sync on my phone and everything is restored!
-
Trying to set up a new DB and Mobile server ....
I have a server runing ora 9i and mobile server 10.2 on linux,
Now trying to change the server to a new one with linux and
Oracle 10.1. and 10.3 as the mobile server.
Did the following steps.
1.All users were logged off in old server
2.stopped mobile server
2. Exported using system full db
3. imported the same to new system
4. Checked ADMIN_JDBC_URL,THIN_JDBC_URL and found the new server settings.
. every thing is fine except mobile server part.
when try to start mobile server it gives following.
[oracle@test bin]$ ./runmobileserver
2008-03-05 11:29:03.169 NOTIFICATION JMS Router is initiating ...
2008-03-05 11:29:04.188 ERROR J2EE HTTP0004 Internal error raised tyring to instantiate web-application: webtogo defined in web site OC4J 10g (10.1.3) Default Web Site. Application: mobileserver does not exist. Error creating Web application: webtogo
08/03/05 11:29:04 Oracle Containers for J2EE 10g (10.1.3.0.0) initialized
Then tryied ./repwizard and it says system does not have required priviledge. But as to the help section all roles were assigned to System.
if anyone has the correct method of transfering the entire db and mobileserver to a new server please post details.
I need to sync clients on the new server without refreshing.
Help is appreciated.Thanks rekounas,
I was out of the office for few days and back again at work.
I made a mistake while running the repwizard.
now its ok.
Problem was i was using mobileadmin to run repwizard.
But i tried it with database schema(back end) user and password now ok and
running on 10g r3. but it does a complete refresh on the new server. that takes time and i think there should be some parameter to make it only fast refresh. -
Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.
I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Oracle 9I Database, and Mobile Server install history
Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
2. Setup TCP/IP, and IPX/SPX networks
Computer name YGGDRASILL
Host name = YGGDRASILL
Domain = CFR.MSSTATE.EDU
Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
5. Applied NT 4.0 SP6.
6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
7. Installed MDAC 2.6
8. Installed Paint Shop Pro 7 for capturing error screens.
9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
10. Began install of Oracle Database Enterprise Edition with target parameters:
Home directory = D:\Oracle\Ora92
Database directory = D:\Oracle\oradata
Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
Port = 2030
SID = FIA
SYSTEM Password = phwphw
SYS Password = phwphw
SCOTT Password = phwphw
DBSNMP Password = I left this one unassigned or empty.
tnsnames.ora entry for remote TCP/IP connection
a. CD 1 of 3 load
1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
b. CD 1 completed with only one problem, and CD 2 load begins.
c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
HTTP Server URLs
http://7778
https://4443
12. Evaluation of install success begins.
a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
b. All other services start correctly.
c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
16. Attempt to install Oracle Mobile Server Release 5.0.1
a. File locations Screen
Name: = OraLite501
Path: = D:\OraLite501
b. Select Mobile Server at Installation Screen
c. Mobile Server Repository Database Information Screen
Hostname = YGGDRASILL = hostname from tnsnames.ora
Port = 2030 = same as Database port
It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
d. Yes. At Do you want to install the Mobile Server Repository question.
e. At Oracle Protocol Support, I checked the SPX box.
f. Summary, and Install screens function to specifications.
g. Mobile Server Repository Wizard
Database System password:
Password = phwphw
h. Mobile Server Repository Wizard
Schema Name: fiafield
Password : fiafield
i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
1. OraMTSRecoveryService is started
2. OracleOraHome92HTTPService is started
3. OracleOraHome92Listener is started on port
4. OracleServiceFIA is started
5. Apache.exe has the wtgias.dll loaded
6. The Moble Server is not running and it should be if the documentation is correct.
7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443You can find information regarding enabling the iSQLPLUS in the following Oracle manual.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14357/ch2.htm -
Database 9i, and Mobile Server install history
Dear Oracle technical representative:
This TAR started out as a true request for help in solving installation problems with Oracle 9i Release 2 Enterprise Edition, and Oracle 9i Mobile Server Release 5.0.1, but it has turned into a history of frustration with out of date, laconic, and often incorrect, and misleading documentation. As a software developer, I understand that documentation is always out of date, at least mine is. Nonetheless, I must speak my mind while understanding, and sympathizing with your situation.
I struggled through the documentation, and managed to get everything working. While I was doing that, I wrote down the step by step procedure that I used to get Database, and Mobile Server running. By sharing this rough install history with you, it is my hope that it will help prevent others from experiencing the same difficulties that I have had. It has been my observation that when a user has problems installing a trial software package they give up quickly, and do not purchase a copy. It is thus extremely important that the installation instructions, and quick start guide be accurate, attentive to detail, and well written. The first impression is the one that counts.
The Oracle 9i Lite Installation, and Configuration Guide for Windows NT shipped with Oracle 9i Lite Release 5.0.1 definitely requires, and emergency rewrite. It is terribly out of date, inaccurate, and laconic. My guess is that it is a very sloppy rewrite of poorly written 8i documentation. The Oracle 9i Database Installation Guide for Windows is somewhat better. It however should do a better job informing you that before installing onto a old server the Microsoft Foundation Class (MFC), and VC runtime libraries must be up to date. The history describes the trouble with not having the MFC42.dll at version 6. Another corker is that the default port the installer presents is 2030, and not 1521, and that leads to major confusion in the both the Database, and Mobile Server installs.
Thank you for looking at the history. I hope that it will be of use to you when you update your documentation.
Thomas G. Matney
Mississippi State University
[email protected]
(662)325-2791
TAR for Oracle 9i Release 2 Database Enterprise Edition, and Oracle Lite Release 5.0.1 Mobile Server
Installation problems are highlighted in red.
Installation sequence/history:
1. Installed Windows NT 4.0 Server SP1 on Dell Power Edge 4300 dual x86 server to wipe the slate clean.
2. Setup TCP/IP, and IPX/SPX networks
Computer name YGGDRASILL
Host name = YGGDRASILL
Domain = CFR.MSSTATE.EDU
Internet name = YGGDRASILL.CFR.MSSATE.EDU = 130.18.130.225
3. Installed NT SP3, and Internet Explorer 4.01 from the NT 40 Options Pack CD as the gateway to installing MTS 2.0, and IIS 4.0.
4. Installed MTS 2.0, and IIS 4.0 from NT 4.0 Optins Pack CD.
5. Applied NT 4.0 SP6.
6. Installed Internet Explorer 5.5 as a prerequisite to installing MADAC 2.6.
7. Installed MDAC 2.6
8. Installed Paint Shop Pro 7 for capturing error screens.
9. As previous install errors stated that the ordinal function xxxx could not be found in MFC42.dll, the latest version (6.0.8665.0) of the dll was installed, and registered from MS VC++ SP5. Also I upgraded MSVCIRT.dll, MSVCRT.dll, MSCRT40.dll, and added MSVC60.dll from SP5 to be on the safe side.
According to the installation documents all the prerequisites for installing Oracle 9i Release 2 Database Enterprise Edition are satisfied.
10. Began install of Oracle Database Enterprise Edition with target parameters:
Home directory = D:\Oracle\Ora92
Database directory = D:\Oracle\oradata
Global database name = FIA.YGGDRASILL.CFR.MSSTATE.EDU
Port = 2030
SID = FIA
SYSTEM Password = phwphw
SYS Password = phwphw
SCOTT Password = phwphw
DBSNMP Password = I left this one unassigned or empty.
tnsnames.ora entry for remote TCP/IP connection
a. CD 1 of 3 load
1. Error writting to MFC42u.dll. Action ignore. A check indicated that MFC42u.dll version did not match the updated version of MFC42.dll. Plan is to update after install. Unicode version of MFC is probably not used by the installer.
b. CD 1 completed with only one problem, and CD 2 load begins.
c. CD 2 installed without incident., and CD 3 load begins, and completes without farther problems. The only issue to address at this time is to update the MFC42u.dll.
HTTP Server URLs
http://7778
https://4443
12. Evaluation of install success begins.
a. Oracle HTTP Service will not start. It is of particular interest that on installs that I do not upgrade the MFC42.dll the Oracle HTTP Service will start correctly, but during the install I get the error message Ordinal nnnn not found in MFC42.dll, and the Oracle MTS Recovery Service crashes during the install. I am caught between a rock and hard spot on this one. See the Figure 1. At the end of this document. I do not need the HTTP Server at this time but I will need it later and this issue must be resolved. It appears that it hangs during startup. I am sorry but I lost the ordinal number nnnn.
When I try to start the HTTP server from the Programs menu. It Hangs, and does not return an error message. See Figure 2, and the included Apache Setup.txt, the install log, and the HTTPd.conf . The conf, and setup files look OK to me. What is the problem?
b. All other services start correctly.
c. Logged into the database as SCOTT on the server with SQL Plus using the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
I created some tables, inserted data, and queried for the data. Everthing seems to be working correctly.
d. Logged in remotely from my AOL account on a dial-up line using Oracle 9i Release 2 Personal Edition installed on my ThinkPad. Every thing tested out as above. I used the connection information:
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill.cfr.msstate.edu)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
13. I concluded that except for the Oracle HTTP Server Service not starting correctly, and that after updating the MFC42u.dll to VC++ SP5 level the stage is set for installing Oracle 9i Mobile Server Release 5.0.1. I copied the MFC42u.dll to the server and registered it successfully.
14. As Visual Studio 6.0 Professional updates all of the MFC stuff, I decides to install it at this juncture, and apply SP5.
15. Installed JDK1.3.1 required for Oracle 9i Mobile Server Release 5.0.1
At this time the prerequisites for installing Oracle 9i Mobile Server Release 5.0.1 are satisfied, and MFC, and rt are at version 6.
It is important to note that after installing MS Visual Studio Professional 6.0 SP5, the HTTP server started working. It is clear that prior to installing Oracle Database it is essential that MFC, and possibly other components are upgraded before starting an installation of Oracle. This probably only applies to old NT servers, but it should be mentioned in the installation instructions.
16. Attempt to install Oracle Mobile Server Release 5.0.1
a. File locations Screen
Name: = OraLite501
Path: = D:\OraLite501
b. Select Mobile Server at Installation Screen
c. Mobile Server Repository Database Information Screen
Hostname = YGGDRASILL = hostname from tnsnames.ora
Port = 2030 = same as Database port
It is troublesome that the port in tsnames.ora is 1521, and not 2030 as was specified in the database install. I will try this port on the reinstall. On the retry, it worked. The problem was that I was mislead by the default port of 2030 at the database install. The database was actually installed on port 1521, and I was not given an error message, or warning. As I am a first time installer of Oracle products this threw me for a loop. The default port for the database needs to be 1521, if regardless of what the user specifies for a port you are going to install on port 1521.
Net Service Name = FIA.YGGDRASILL.CFR.MSSTATE.EDU = Global database name as required by installation instructions.
d. Yes. At Do you want to install the Mobile Server Repository question.
e. At Oracle Protocol Support, I checked the SPX box.
f. Summary, and Install screens function to specifications.
g. Mobile Server Repository Wizard
Database System password:
Password = phwphw
h. Mobile Server Repository Wizard
Schema Name: fiafield
Password : fiafield
i. Success at last with the install part. The problem was the wrong port number. See my above comments on this problem, and how Oracle could grease the skids for the next first time installer.
j. I could not find the httpd.conf file in the place the install instructions said it should be for running the Mobile Server in Oracle HTTP Server. Since only one copy of httpd.conf existed, I added the include D:\OraLite501\mobile\server\bin\wtgias.conf to the bottom of the file assuming that it is the correct one. I the re-booted instead of using apache -k restart. The Oracle HTTP Server started, so there is hope. The install instructions state that the httpd.conf file would most likely be in the program files directory, when they are really installed in the Oracle Lite home directory.
k. According to the documentation the Mobile Server should start when the Oracle HTTP Server starts with the wtgias.conf file added to the httpd.conf file. It does not. If I use Process Explorer, I know that Apache loaded the wtgias.conf, because both Apache.exe processes that are running have the wtgias.dll loaded. The facts are at this stage of the game are
1. OraMTSRecoveryService is started
2. OracleOraHome92HTTPService is started
3. OracleOraHome92Listener is started on port
4. OracleServiceFIA is started
5. Apache.exe has the wtgias.dll loaded
6. The Moble Server is not running and it should be if the documentation is correct.
7. If I start the Mobile Server either as a service using wtgsvc -i or with the webtogo command from the DOS prompt, the Mobile Server starts, but when I attempt to log in with the URL http://Yggdrasill:7778/webtogo/startup it inform me the Mobile Server is not started and it is. Figure 3 shows the response I receive from the login attempt.
l. I finally ran the Mobile Server in total debug mode using the command webtogo -d0", and it gave me the subtle hint that the correct URL is
http://Yggdrasill.cfr.msstate.edu/webtogo/startup.
When I use the above URL and I can login to the Mobile Server with UN = fiafield, and PW = fiafield. I was confused by the documentation. I was under the assumption that the host address would be either http://Yggdrasill:7778, or http://Yggdrasill:4443. After all when I, installed Oracle Database these URLs were listed. It needs to be made clear in the installation guide for the mobile server that the Mobile Server address is http://Your servers WWW address/webtogo/startup, and the statements about the Mobile Server will start when the Oracle HTTP Server is started needs to be removed since they are incorrect. Also, the documentation should clearly state that the Schema Name, and Password given in the Repository Wizard Screen are synonymous with the username, and password for the Mobile Server login.
m. After determning the hard way that the Mobile Server does not start when the the Oracle HTTP Server starts, and that the correct URL is http://Internet address/webtogo/startup = http://Yggdrasill.cfr.msstate.edu/webtogo/startup, I decide to start the Mobile Server as a service with the command wtgsvc -i. After I re-booted, to my surprise, I could not login to the Mobile Server. When I checked the system services, the webtogo service was running. So to give the start as a service thing a fair chance I re-booted again, but obtained the same results. I thus concluded that the Mobile Server will not run correctly as a service. As it turns out my conclusion was wrong. After waiting a few minutes, my login try was successful. The documentation should indicate that after booting it may be a minute or two before the Mobile Server service become available.
n. After some serious problems with the installer, and the documentation everything is working. I have a green light to go on to the next stage, which is program the handheld to take advantage of the Mobile Server. I will be glad to get back to programming, and am so thankful that I am not a network administrator.
Appendix
HTTPd.Conf (Abstract only), Apache Setup.txt,
tsnames.ora, and listener.ora.
HTTPd.conf (Abstract only)
# Based upon the NCSA server configuration files originally by Rob McCool.
# Include the Oracle configuration file for custom settings
include "D:\oracle\ora92\Apache\Apache\conf\oracle_apache.conf"
include "D:\OraLite501\mobile\server\bin\wtgias.conf "
tsnames.ora
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora92\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
INST1_HTTP.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
FIA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
EXTPROC_CONNECTION_DATA.CFR.MSSTATE.EDU =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
listener.ora
# LISTENER.ORA Network Configuration File: D:\oracle\ora92\network\admin\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = yggdrasill)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\ora92)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = FIA.YGGDRASILL.CFR.MSSTATE.EDU)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = FIA)
Apache SetupInfo.txt
The following information is available in:
D:\oracle\ora92\Apache\Apache\setupinfo.txt
The HTTP Server can be accessed using the following URLs:
http://yggdrasill:7778
https://yggdrasill:4443When you install the MD Workstation you are opted to choose among different applications i.e. mobile sales, mobile service, mobile system maintenance or authorization management tool. You can there choose the application to install besides the installation of the MD Workstation.
If you want to add application(s) later, you have to choose 'modify' and choose all parts for the MD Workstation plus the applications. If you omit options chosen before when doing the first installation then these will be removed. So be shure to choose ALL relevant things for the application as well as for the MD Workstation.
You can also generate the application from the installed repository, there are several notes on this subject available ('how to generate an application') which are referred to in about any installation guide or note changing the msa coding.
Regards Kai -
I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.
Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :) -
Problems with iWeb and mobile me
Ciao everyone,
I've been having a ridiculous amount of problems with my mobile me account and my iweb. 2 weeks ago I was fine with my iweb and mobile me but all of a sudden my iweb would say it publish but it really doesn't publish. The I went to the mac store a couple of times and thought I would get answers but I didnt get any answer even though I had a couple of one to one visits with a couple of stores in NYC. So when i publish it it shows that it published in my www.me.com/idisk/iweb folder but then it doesn't show in my website. Then one guy told me that I should just recreate a new site but copy and past all the old information to the new one. Now it won't publish at all because I guess its a lot of information to publish at once. I get an error message saying error iweb was not able to publish please try again later. Any help?Hey you guys,
Thanks for the help, but I did try to publish all to my iweb and it didn't work. I do try to view my published website through the file/visit published site and for some reason only my intro page is there then when i go into the main page i get an error page. I also did go to my finder/Go/idisk/myidisk/iweb/site/iweb and saw my websites folder. Everything seems to be in it. I tried to take a screen shot of what is in my folder but I can't post pictures. In my folder I have a folder for gallery, index.html, site, shites.rss, and my website folder usvisualswebsite
Any other suggestions? This is really frustrating. I also created another test site with nothing in it and published it and it says it finishes publishing but the blank test page isn't there.
Maybe you are looking for
-
Limitation on mails in Iphone 5 with IOS7
Hi, Is there any way where i can limit the mails on my Iphone 5 updated to ios 7.0.3. The earlier ios 6 had an option to limit it but i am unable to find the option for ios 7. I have 7 mail ids and and it is consuming more space on my device. If i ca
-
Using Field values as part of PDF output file
Hello, I was wondering if it is possible to use information in the *.dat file to create the name of the *.pdf file which will be sent (by email) to our customer automaticly. So let say there is a field "GLOBAL ORDNO" with a value "1042193" in the dat
-
How to install unsupported (obsolete) toolkits/modules in newer LV versions?
Hello, Installers of LV toolkits/modules do not permit installation in newer LV environments. I don't know if that is necessary, but I am quite positive most of them would actually work 100%. If this "feature" cannot be revised, is it possible to obt
-
I am a beginner photography student and want to buy Lightroom for two of my computers, desktop and laptop, which package should I buy
-
Access DataField in Itemrenderer when submitting to Database
Hello, I'm really stuck on this one. I have setup an Itemrenderer in a Datagrid which manages a DateField. Users can enter a date and other values directly in the datagrid. When they click 'submit', I want to populate a row in a database and I have s