1242AG and 4.2.130.0 Issues

Greetings,
We recently upgraded our 4402 WLC to version 4.2.130.0. Since then, we have had issues where clients randomly get disconnected. Searching through this forum and online...I have found some references that suggest there may be a problem with the 1242 APs and 4.2.130.0, however I cannot find out any details.
Is there anyone out there with 1242AG APs that knows of issues with 4.2.130.0? We upgraded to that instead of 5.X on the recommendation of a TAC Engineer.
Thank you.

Thanks for both your reply's. I think in the other thread there may have been a typo.
What started happening was that clients would be dropped from the nearest AP and then re-associate with one farther away. After a few seconds, clients would drop that association and go back to the original AP.
I think what might have been happening was the coverage hold algorithm kicked in and it was causing clients to get disconnected. We were on 4.1.171 prior to the 4.2 upgrade and didn't see that issue. Nothing else has changed in our environment...so I was thinking the issue might be re-worked code for the RRM. The timing was always kind of random (sometimes every 2-3 minutes, sometimes 10 minutes), but in the SNMP logs I always saw coverage hole messages when the issues were occurring.
Does any of this make sense?
Thanks again for your help.

Similar Messages

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

I am very annoyed at the Creative Cloud set up and the non-stop issues and problems! I am paying monthly for this service and it is constantly failing in some way! So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE! That isn't including the other apps that have had issues! I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging! It is costing me more than just this monthly fee! And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues. Really Adobe?

Adobe contact information - http://helpx.adobe.com/contact.html may help

B1 8.8 and Crystal Reports datasource issues

Hello everyone,
the HowTo on using CR with 8.8 recommends the SAP B1 Datasource type for reports.
In our setup this datasource type does not work (logon failed message after entering credentials) while OLE (ADO DB) does.
SAP B1 Datasource type would be of great help to our report designers due to annotated tables.
We were not able to trace what is going wrong i.e. we found no more detailed error msgs.
Is there any documentation on the B1 datasource type and how to investigate issues with it?
Many thanks in advance!
Edited by: Wolfram Richter on Nov 9, 2010 2:01 PM

Strange, very strange...
I've done a little test in our setup. Trying to connect to our SBO 8.8 server, I selected the SBO server, the license server and the database type, leaving the credentials blank. Opening the list with companies, it showed all companies.
So something must be going wrong trying to reach either the SBO server or the license server. Like it can't connect to the SQL Server. I don't know if there are any differences in actual connections to MS SQL Server between OLE and SBO connections.
I'm running out of clues. At this point I can only think of two things, but assumed that you used the same info with the OLE connection, they're unlikely. Those are IP resolving issues and MS SQL Server instances.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?

From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
Sorry to bring the bad news.

On-premise SharePoint 2013 and SkyDrive Pro Sync Issue

Hi all,
I'm not sure if this is the correct forum between SharePoint and SkyDrive as the issue is related to an update on SkyDrive Pro.
premise SharePoint 2013 installation (migrated from 2010) and Office 2013 installed. SharePoint is patched up to the latest CU. Syncing documents from SharePoint worked fine until KB2817495 was installed. The syncing still seems to work but we cannot add
any new libraries, either directly from the browser using the "sync" button or adding the URL to "Sync a new library". I've tested it with an Office 365 account and the libraries add fine so I'm not sure whether it's a SkyDrive or SharePoint
issue. If I uninstall the update then I can successfully sync new libraries from our on-premise installation.
At this point the only solution I can see is to prevent that update from installing via WSUS.
Kind regards,
Rick

Hi
anuxps ,
Yammer already have Single Sign On with Office 365, but SharePoint Server for on-premise does not follow a 90-day release cycle and it won’t yet. Also we are looking for Yammer integration with on-premise
soon. There are improvements coming.
Reference:
http://social.technet.microsoft.com/Forums/en-US/a6ecdee4-ac28-4989-929b-0e6c9968732e/yammer-sharepoint-onprem-integration?forum=sharepointgeneral
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

I purchased a season of a TV show from itunes and it won't go onto my ipad, i've purchased several seasons in the past and never had this issue, how can i fix this?

I purchased a season of a TV show from itunes and it won't go onto my ipad, i've purchased several seasons in the past and never had this issue, how can i fix this?

Drew how is that even possible? I use gift cards all the time, any time I've had insufficient funds iTunes will not allow the purchase, sights Insufficient funds and rejects the purchase. Any time I log into my account the money in that account appears in the upper left corner. If you're not seeing that then you have other issues. Anyway... Kneil is right you should be able to rip CDs you own to your iTunes library (regardless of your money matters with iTunes), then depending on how you set up the music you need to add it to your playlist and then sync it to your iPod. Did imported music ever work? How are you ripping or importing the music to iTunes? Are you using a compatible format?
Something else to look at-- It's possible your cable is defective, have you tried a new or different cable? Some of what your describing is a bad cable issue. Good luck, Cheers.

ILife 08 and iMovie 06 compatibility issues?

Sorry if any of this has already been covered in other threads...
Has anyone had a chance to thoroughly test the 6.04 version of iMovie (download version if you install iLife 08) and know what compatibility issues there are?
I.E. How well does iPhoto 08 play with iMovie 06, or iMovie 06 with iDVD 08. Are the third party plugins problematic with v6.04?
From what I saw at the Apple store, iPhoto08 and iDVD08 would be the only apps that I would really want since iMovie08 seems to be a step backwards and iWeb is still lacking in everything that I wanted improved. But I don't want to waste the money to discover all sorts of "gotchas" with trying to get iMovie06 to play nice with the rest of iLife08...
Also, has anyone done an install excluding iMovie08 entirely? Do you still need to download 6.04 if installed this way? Are there any pitfalls?
This is like Deja vu or something...When iLife06 first came out, I installed everything but iMovie and stuck with iMovie05 for a long time cause of all the bugs and how long it took to get the third party plugins working...

Of all the things for people to moan about with iMovie '08, the real unfortunate thing is it's inability to import effects, etc. (essentially your completed movie) from iMovie HD. One could somewhat forgive Apple for this debacle, if only it played nice with iMovie HD. Then it could be everything it's supporters say it is, i.e. "a different app," "a simple app for simpletons in a hurry" (although I find it's lack of tools and compatibility issues more difficult to manage).
...and a lot of us feel like this is the thing we're going to be stuck with going forward.
I keep thinking that something else is going to happen, because this can't be right. I think this diver/video engineer who came up with this concept is suffering from the bends.
Apple doesn't need the money, (as in making us buy Final Cut Pro for decent video editing), trust me, so I don't understand why it would take the PR hit.
iMovie '08 spoofs are already on YouTube, etc.
Message was edited by: rmig68

I teach Continuing education classes to Real Estate agents and I need to issue them certificates at the class, whihc need to be signed by me and it needs to contain their info on the certificate. The certificate is currently saved in a word format.What i'

I teach Continuing education classes to Real Estate agents and I need to issue them certificates at the class, whihc need to be signed by me and it needs to contain their info on the certificate. The certificate is currently saved in a word format.What i'm trying to accomplish is to do a "mail merge " ( as some classes i have as many as 150 attendees) for the document, digitally sign each one with my signature on the certificate and then e-mail it out to the respective attendees. can this be done? if so How?

This is the step that I took after inputting my signature.
On the right, after saving my document, I click "Get Others to Sign." I was confused because it says that it's powered by EchoSign. Like I stated before, my clients are able to sign this document when I send it to them, but it is returned to me with their signature (not in the signature field, but at the end of the document), and my signature is missing. I tested this on myself - my signature is missing when they receive it.

ITunes and iPhone 4 sync issues with Windows 7 64 bit

I am getting several errors with sync'ing iTunes to my iPhone on windows7 64bit. I reinstalled iTunes, I did a repair on iTunes, even tried a RESTORE on iPhone, but it gives me so many errors one after another after another.
1. Some of the items were NOT copied to iPhone "iPhone" because one ore more errors occured.
2. Attempting to copy to the disk "iPhone" failed. An internal device error occured.
3. The iPhone "iPhone" can NOT be synced. An unknown error occured (0xE8004006).
4. The iPhone "iPhone" can not be synced. The required file can not be found.
5. The iPhone "iPhone" can not be synced. A duplicate filename was specified.
6. The iPhone "iPhone" can not be synced. An internal device error occured.
These errors keep appearing one after the other.
I have fully uninstalled iTunes and ALL Apple programs from my PC, rebooted, disabled antivirus/firewall software, etc.
I have tried changing time zones.
I have created a new user account on same laptop and still have same issues with iTunes.
Restore fails with error "Unable to read file or file is corrupt".
Yet iTunes works fine on a 32bit operating system of Windows 7.
The problem is that I upgraded my laptop and the new laptop is Win7 64bit. I have ALL the newest drivers, and I checked to ensure it was not a BIOS or CHIPSET driver causing issues. All windows updates are up to date and current.
I have been trying for over a week with every piece of trouble shooting I can find to make this work.
Any help or further information would be VERY GREATLY APPRECIATED.
Thanks in Advance

I too am having the exact same issues on the same laptop! I spent an hour last night with "supervisor" in tech support who didn't solve my problem but did close the ticket (210757099 for any Apple people that might read this). Thanks a lot Ben!
I have seven ipod/iphone/ipad devices so I am very familiar with how to sync. In the last few weeks, version 10.2 of iTunes (I'm up to 10.2.1.1) has gotten less and less reliable in successfully sync'ing to the devices. It started out with my 3GS, but my iPhone 4 was fine. Then I got an iPad2 and now NOTHING will sync properly. Every time I plug one in (or press the sync button) it wants to do a restore from the backup made the last time it sync'd. It does that, reboots the device and sync's.
I've gotten a ton of errors, here's a sample.
iBooks couldn't be installed on my iPhone unknown error 0xE800000C
Textie couldn't be installed on my iPhone, unknown error 0xE8000013
"failed required file not found" - This is one of my favorite error messages. It demonstrates how Apple is becoming like Microsoft. It is 100% accurate and totally useless. It would be helpful if it told me the NAME of the file that was not found...
unknown error 0xE8004006
"duplicate file found" - Again, in true Microsoft form, it didn't tell me the NAME of the file that was duplicated.
I tried everything discussed in the following thread but it did not work.
http://discussions.apple.com/thread.jspa?threadID=2401822
Stopping the enhanced USB controller didn't work. Mine is the Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller (version 9.1.1.1020).
A few days ago I got hundreds of errors in a sync. When it completed, a dialogbox came up asking if I wanted to send this crash report to Apple, I said yes. So, crash reports are now automatically being sent. You can see evidence of this in the %appdata%\Apple Computer\Logs directory.
This section of the log looked interesting because it says it couldn't connect to USB mux port 32498
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionReceiveMessage (thread 4232): Could not receive size of message: 0 No error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] readthread (thread 4232): Could not receive message: 0xe8000001
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] AMDServiceConnectionSendMessage (thread 2504): Could not send message size: No error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] connect_toport (thread 5700): Could not connect to USB mux port 32498 for device 3: Input/output error
[4404 @ Tue Mar 22 09:05:05 2011] [(unknown facility) iTunes.exe] MobileDeviceConnectlocked (thread 5700): Could not connect to lockdown port on device
Just grasping at straws here....

My itunes account shuts down for no reason. It wont recognize my iphone and there is an issue with network connectivity and itunes. I have already reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done. Ideas??

My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??

Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

Awful Customer service and handling of my issues

Hi,
Not quite sure where to begin but i would like someone to take notice of my concerns as it appears no one in the service center is. I have never received such a poor service and whats worse is that the information i have been given appears to be false.
The issue started over a month, in november my ex partner bought me a brand new laptop from littlewoods, a G505s, the AMD quad core, ati 2GB graphics, supposedly the works, anyways after about a month it got really hot and then eventually the screen went blank and would not show any picture, so i contact Lenovo who arranged to collect the laptop and repair it.
The laptop was received on the 17th of January in germany at there so called repair center, i called them each day to check the status and at first was told to wait the 10 days, then after the 10 days, ui was then told to wait 28 days, then two weeks after the initial contact i was told they would find out how long the parts would take to arrive and so fourth, this went on for weeks. Eventually after nearly four weeks, i was told the parts would take too long and so they would issue me with a returns code if i coudl provide proof of purchase. The problem is the laptop was apresent and my ex girlfreind was not playing ball so thinking that i would have to wait for the laptop to be returned, low and behold i come back from work and there we go, they returned the laptop UNREPAIRED.
I received a document with it saying that they have diganosed the problem as the motherboard being faulty however they have so called resolved this issue by returning the laptop without being repaired, which i did not ask for them to do, i asked for it to be repaired or replaced under the warranty which they are legally obliged to.
When i contacted LENOVO about this, i was put through to a rude senior supervisor who was very rude and unhelpful, stating that i had to provide this and when i tried to explain that i was unsatisfied that it had taken so long for this to get brought to my attention he claimed i was being abusive. I asked for an email address to email into and he refused to provide this, i asked to escalate the call, he refused. I think considering i have worked in customer services for over two years i know how these work and there are complaints procedures in which if a complain is not resolved then it gets escalated if the customer requires this however it appears Lenovo and this so called senior does not feel the same way.
All i want is my laptop replaced or repaired, an email address to send my formal complaint about this member of staff and my outstanding issues resolved, as i was given [email protected]

welcome to the BT community forum where customers help customers and only BT employees are the forum mods
are you connected directly via a filter to the NTE5 master or test socket or to somewhere else? Is the master the only phone socket in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal if you hear noise then you need to report a phone fault to 151
regardless of which ISP you use apart from cable the engineers will be exactly the same as all the lines are owned by openreach and treat all ISPs exactly the same
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. Please help, restoring setting even didn't helped.

I am facing wifi and mobile 2G signal issue after upgrading to IOS 6 from IOS 5 in IPhone 3GS. The mobile carrier signal as well as WIFI suddenly drops zero and are then restored automatically. Sometimes i cannot conenct to WIFI even standing infront of WIFI router. Please help, restoring setting even didn't helped.

Update: my phone's connecting to the WiFi again. I don't know what did the trick. I did nothing since reinstalling the software. It hadn't worked then, it is now. I tried connecting to my dad's phone's hotspot( he uses a Moto G), and it worked. I then tried connecting to the WiFi at a friend's house, and when I came back home, my phone was able to connect to my WiFi! Is it of any significance that my friend's router doesn't require a password? My issue has been resolved( for now; I hope I'm not counting my chickens before they've hatched). For anyone facing a similar issue, I suggest you try everything I did:
1. Turn your router off for a minimum of 30 seconds, turn it back on and try connecting.
2. Click on the WiFi network you are connected to, scroll to the bottom, tap "Renew Lease".
3. Do a soft and hard reset.
4. Reset network settings.
5. Back your data up, erase all content from settings menu, restore from backup.
6. Reinstall your software( put it in recovery mode).
I am not sure which of the above worked for me. Make sure you try everything. If none of the above works, take it to a genius bar or an authorised service provider. Good luck! :)

ITunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide

iTunes Match has stopped uploading - every file errors and says waiting - I have tried to delete the files and use other formats etc. I have had the service since Day 1 and NEVER had an issue. It didn't start until the Delete from Cloud switch to Hide from cloud - the files that do not upload show grayed out on my other devices.

Have you confirmed that you successfull purged iTunes Match by also looking on an iOS device? If so, keep in mind that Apple's servers may be experiencing a heavy load right now. They just added about 19 countries to the service and I've read a few accounts this morning that suggests all's not running perfectly right now.

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I baked up my iphone and when i had issues with sim lock i got it to finally work isynced my phone with i tunes and lost all apps recently downloaded how do i get it back

i had to get an internet conection from a friend to download akll my apps evrytime i sync with my pc wich already had itunes all apps except statup are gone only thing left was an i tunes song i brought from itunes each time i use my apple id pass word it tells me to retry i do this 4 to 5 times and some times have no success my latest issue was my sim locking buy itself then asking me to put in a sim without a lock , i only have 1 sim i brought 2 phones and have had no issues with the other phone and when i do have the original startup apps i can not move or arange them thru itunes apps and i cannot use sim from other iphone pls help evry1 i ask wouldnt have a clue because there having there own dificulties

If you also backed up to your computer - you can restore from that backup - to retrieve the files. As far as I know- that should have no bearing on deleting them from iCloud - they should still be in that backup.
If you used iOS file sharing with your computer - and saved the files to your computer - you can retrieve them from there.
if the only place that the files were saved to was iCloud, I know of no way to get them back.

1242AG and 4.2.130.0 Issues

Similar Messages

Maybe you are looking for