17" crt monitor, but not all refresh rates showed

Its a duplicate from this thread:
http://bbs.archlinux.org/viewtopic.php?id=89220
But this is the right subforum.
Only some refresh rates are displayed as an option.
Look xrandr:
$ xrandr
Screen 0: minimum 320 x 175, current 1280 x 1024, maximum 1600 x 1200
default connected 1280x1024+0+0 0mm x 0mm
1600x1200 50.0 56.0
1400x1050 51.0 57.0
1280x960 52.0
1024x768 53.0 61.0 62.0 63.0 64.0
800x600 54.0 67.0 68.0 69.0 70.0 71.0 72.0
640x480 55.0 76.0 77.0 78.0 79.0
1280x1024 58.0* 59.0
1152x864 60.0
896x672 65.0
832x624 66.0
720x400 73.0
640x512 74.0 75.0
640x400 80.0
640x350 81.0
576x432 82.0
512x384 83.0 84.0 85.0 86.0 87.0
416x312 88.0
400x300 89.0 90.0 91.0 92.0 93.0
360x200 94.0
320x240 95.0 96.0 97.0 98.0
320x200 99.0
320x175 100.0
The weird value rates are fault of the nvidia driver telling jokes.
But how can i have more refresh rate in 1280x1024 than 1280x960? My monitor is a standard 4:3 crt.
I tried disabling EDIDs and specifying the sync values according to the monitor.
The monitor is a samsung syncmaster 700p.
Any ideas? Thanks in advance.
HEre is my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder58) Wed Dec 9 16:34:26 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "Module"
# Load "drm"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
# Load "dri"
EndSection
Section "ServerFlags"
Option "DontVTSwitch" "no"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 85.0
VertRefresh 50.0 - 160.0
# Option "DPMS"
Option "UseEDID" "false"
Option "IgnoreEDID" "true"
Option "ModeValidation" "NoEdidModes"
EndSection
Section "Device"
# Driver "radeonhd"
# Option "AccelMethod" "exa"
# Option "DRI" "on"
# BusID "PCI:1:5:0"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "UseEDID" "false"
Option "IgnoreEDID" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "nologo" "true"
SubSection "Display"
Depth 24
Modes "1600x1200" "1400x1050" "1280x960" "1280x960@75" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection

I see you have a nvidia card. For nvidia users xrandr displays wrong value. If you want to check exactly what you're running, search some of the monitor options, it should have it in there. Also use the nvidia-settings, but for me at times it too reported wrong refresh rates.

Similar Messages

  • I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some but not all are also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?

    I just got a new iPad air and also own an iPhone 5. I'm receiving most of my text messages on the iPhone, but some are now also showing up on my iPad. I don't want them on my iPad, any suggestions on how to get them to stop showing up n my iPad?

    Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.

  • I purchased a new MacMini BUT not all the apps show in my purchased list on the App Store

    I purchased the new mac mini that comes with lion and it started up and works very well, I signed on to the app store with my apple-ID and it downloaded the updates for GarageMand, iMovie, iPhoto and Facetime but even after several days, the the Lion app has not shown up...  any idea how long till they realize that I purchased lion and allow me to install it on my other mac mini?
    Just curious.

    Do the non-syncing songs play in iTunes on the computer?

  • I downloaded my previous purchases but not all of them were there. Where can I find them?

    I got a new computer, authorized it on my account, and downloaded some of my previous purchases but not all of them showed up. Is there any way I could get them? How would I do that?

    its in the iphone but when i want to complete the video the previous clips r not found it tells me the origional clip is not found

  • Not all payment history showing in FD33 or F.35

    The payment history flag was set at customer level at time of go-live in 4/2007, but not all payment history shows with transaction FD33 or F.35. No changes were done to customer affecting this flag.
    I was able to confirm payment history was applicable to the customer back to 2007 because the DEV environment is old backup and shows data back 2/2008 to 4/2007. The QE backup is more recent (still old) and shows data 8/2007 to 12/2008. Production only shows 4/2008 to 9/2009.
    Is it possible to configure the system to show ALL payment history? How does the system determine what to show? I found another customer that shows 4/2007 to 4/2011. What's the difference between the two customers?
    Regards,

    SAP provides table KNB4 Customer Payment History which permits 16 entries per customer/company code. Therefore, anything older than 16 periods with values will drop off.
    The customer that had more than 16 entries was because two company codes had entries. (The company code itself does not show on the screen). Still only 16 entries were permitted per company code.

  • Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all??  Looks like I can set it for one but not others.  All, one, or nothing

    Using multiple desktops with a 4 finger swipe on a Mac Book Pro running Lion- is there a way that I can allow Safari open on several but not all??  Looks like I can set it for one but not others.  All, one, or nothing

    Hey Eric,
    Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
    Again, thanks for trying, it is appreciated.

  • On 3G we cannot send emails from either our iPhones or iPad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Email account.  What is causing this and what do we need to do to resolve it?

    On 3G we cannot send  Business emails from either our iPhones or Ipad and this also happens with some WiFi connections but not all.  Yet we can always send emails from our Hotmail Account using both 3G and WiFi.
    We bought the iPhones and Ipad so that we could send emails while we are out of the Office, but we are not able to do this unless we can find a WiFi connection. Incoming emails are fine.  We use IMAP, for Business emails just incase this is relevant and I know that Hotmail is POP3.
    Our technical IT knowledge is not great, so we look forward to your suggestions as to how to resolve this. 

    Contact whomever supports the email account and get the correct Outgoing email server settings from them.

  • Wifi not working with iTunes, apps store and some, but not all Internet sites....why???

    Yesterday I noticed while browsing Internet that some sites would not open and that some games I regularly play would not open. I also found that I could not open either the apps store or iTunes. Everything seemed to be working the day before and I have not recently upgraded ios (been on version 6.1.3 for a while) or changed any settings on my iPad (2).  With Internet research today I found suggestion that if I switched to 3G I would be able to access these apps and,sure enough, under 3G connection everything works fine. Some other forums suggest changing wifi router settings to fix the issue ....I have not tried this as I wouldn't  like to mess with my router and end up effecting other peripherals/pc's connected to it that are working fine....especially when I am not terribly IT savvy when it comes to hardware settings.  But as I haven't changed anything on my ipad why would my wifi suddenly stop connecting to some apps on my iPad, but not all??? Interestingly I can access many Internet sites (forums) with wifi connection but not the apple forum! To get to anything apple related I have to switch back to 3G ....that includes checking the iOS version I am on via settings!
    I also mention that I have done all the other suggested fixes found on various forums, such as rebooting iPad, renewing wifi lease, clearing cookies, closing all apps etc etc, to no avail. Seems the only suggested fix I have not tried is mucking around with my router which I am very hesitant to do given the **** I went through with my telco when my home Internet connection suddenly stopped working last year. Took me weeks of phone calls to get my internet connection back and being forced by the telco to a more expensive plan, hence very reluctant to start mucking around with that side of things, but why should I need to when it does seem to be working ok with other devices in the home?
    I have started this as new discussion as, even though I am not terribly IT savvy,  I cant see how this could be related to the wifi issues that many on the newer devices (iPhone 5 and iPad mini etc) are reporting as I haven't recently upgraded anything on my ipad and all was working perfectly up until yesterday.
    Any other suggestions on how to get wifi working correctly again on iPad or do I really have to risk the working of every other device in my home and chase it from modem/router side?

    Hi there,
    You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Hope that helps,
    Griff W.

  • HT1911 I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect).  I keep changing it, verifying but not all applications let me proceed.

    I just verified my Apple user ID and password but certain updates won't download (gives me the signal that I'm incorrect).  I keep changing it, verifying but not all applications let me proceed.  So I can't download itunes software updates or update my iphone even though I have just verified my info.  I know others that have this problem but can't get support to resolve it.

    Hi mpellichero,
    Thanks for visiting Apple Support Communities.
    The steps in this article can help if you are being asked for the password to your previous Apple ID:
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/TS5223
    Best Regards,
    Jeremy

  • I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5.  Can this be overcome?

    I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5.  I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

    You can use printPages(1, 5), however I need to know how you print current page.

  • I just traded in my iPhone 4S for Samsung Galaxy 4S, still have iPad. Some of my iPhone contacts are unable to send me a txt that I can receive. But NOT all of my iPhone contacts. I have had them change their settings for my ph number to NOT say iPhone.

    I just traded in my iPhone 4S for Samsung Galaxy 4S, still have iPad. Some of my iPhone contacts are unable to send me a txt that I can receive. But NOT all of my iPhone contacts. I have had them change their settings for my ph number to NOT say iPhone. Txt msg is disabled on iPad. I have no idea what to do. I called the support line that I Pay $9.99 a month for. They told me to delete my iTunes account. Will I lose all my pics on my ipad? I have no music download. I'm getting ****** at this whole thing. And it allllllll started with apples update to the ios7.... I HATED IT. Help.

    What your iPhone using friends label your phone number in their contacts is irrelevant. I don't know who you pay $9.99 a month to but it's not Apple. You can't disable text messaging on your iPad as it is not capable of SMS.
    Do you still have the iPhone? If so, log out of iMessage on the iPhone.
    Try this:
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Log in if not already logged in.
    Click on "Edit Products"
    Click on the "X" to the right of the product.
    Click "Unregister"
    Also, try changing the password on your iTunes account.

  • I do not receive all my e-mailson all my devices. I seem to get them all on my iPhone 5s, but not all show up on my iPad and iMac. they are all set up the same. Any Ideas on what is going on and what I can do to remedy this? thanks

    I have an iMac with OS X Lion 10.7.5,an iPhone 5s with iOS 7.1.2 and an iPad with iOS 7.1.2. all software is up to date. My problem is I do not receive all my e-mail on all 3 devices all the time. I seem to get them on my phone , but not all show up on my iMac or iPad. Any ideas as to what is going on and what can I do to resolve this issue? thanks

    On the iPhone, go into Settings -> Store and turn off "Automatic Downloads" for Apps (and Music and Books, if you wish). You can also do that on the iPad to prevent it from going in the opposite direction.
    That will stop any automatic downloading... to prevent them from coming over when using iTunes, select the phone (under Devices), Apps, and then uncheck "Automatically sync new apps." Again, do the same for the iPad if you wish.

  • Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

    I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
    - Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
      this, after normal behavior for more than a year since purchase of the iPod.
    - Different podcasts have been affected at different times, after changes in the state of the iPod.
    - Only podcasts are affected.
    - This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
    - The only change to iTunes, the Mac, or the iPod is that just before this condition began
      I’d begun syncing an iPhone via iTunes.
    I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
    I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
    So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
    By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
    As I said,  this involves only podcasts. All other content on the iPod does appear in iTunes.

    I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
    Need Help!!!

  • I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

    I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.)  It happens for about 10 of 30/40  files approximately . Thank you, Kathryn

    I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

  • I reinstalled my computer's operating system.  How do I transfer music from my Ipod to my music library?  It transfered some, but not all my music.  I authorized the computer, but it did not help.

    I reinstalled my computer's operating system.  How do I transfer music from my Ipod to my music library?  It transfered some, but not all my music.  I authorized the computer, but it did not help.

    The sync is one way - computer to ipod.  The only exception is itunes purchases.
    The ipod is not a backup device.
    You need to copy everything back using your backup copy.

Maybe you are looking for

  • IPad is not recognized by iTunes or my computer.

    iPad is not recognized by iTunes or my computer. Running 10.6.7, restarted, removed and reinstalled iTunes, erased iPad, removed latest 3rd Party software, tried 3 different wires, nothing is working. Worked fine for months, then stopped. HELP! This

  • Problem sending HTTP

    I am getting 404 not found error message while sending the message from PI to HTTP application using HTTP receiver adapter. I know it is not finding the proper interface to send this message back. But I cross verified using HTTP application developer

  • Aperture - Once pic is in here how can you save as desktop picture ?

    Thanks

  • Adding Current_Timestamp to HANA table

    Hi, We have tables that are replicated from SAP using SLT. We are trying to add a column to that table, so we can capture insert/update datetime every time a record is inserted or updated in the table. We have two options currently: 1. We can add the

  • Documents print light from a computer

    We have a user that prints documents that are too light.  This is noticeable when printing Word documents, pdf documents, and screens from the internet.  We have replaced her computer and created a new profile.  I had her test printing a page from IE