2 issues with call transaction to LS24

Hello All,
There are 2 issues with call transaction to LS24.
<b>1) It doesn't take batch value and displays stock for all batches.
2) When you go back, it doesn't go back to the calling program.</b>
Any thoughts ?
<u>Here is my code:</u>
PARAMETERS: p_lgnum TYPE lgnum,
            p_matnr TYPE matnr,
            p_werks TYPE werks_d,
            p_lgort TYPE lgort_d,
            p_charg TYPE charg_d.
START-OF-SELECTION.
END-OF-SELECTION.
PERFORM display_stock_per_batch.
*&      Form DISPLAY_STOCK_PER_BATCH
FORM display_stock_per_batch .
SET PARAMETER ID 'LGN' FIELD p_lgnum.
SET PARAMETER ID 'MAT' FIELD p_matnr.
SET PARAMETER ID 'WRK' FIELD p_werks.
SET PARAMETER ID 'LAG' FIELD p_lgort.
SET PARAMETER ID 'CHA' FIELD p_charg.
CALL TRANSACTION 'LS24' AND SKIP FIRST SCREEN.
ENDFORM.                    " DISPLAY_STOCK_PER_BATCH

hello
use this code
perform bdc_dynpro      using 'SAPML01S' '0209'.
perform bdc_field       using 'BDC_CURSOR'
                              'RL01S-CHARG'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RL01S-LGNUM'
                              p_lgnum.
perform bdc_field       using 'RL01S-MATNR'
                              p_matnr.
perform bdc_field       using 'RL01S-WERKS'
                              p_werks.
perform bdc_field       using 'RL01S-LGORT'
                              p_lgort.
perform bdc_field       using 'RL01S-BESTQ'
perform bdc_field       using 'RL01S-SOBKZ'
perform bdc_field       using 'RL01S-CHARG'
                              p_charg.
perform bdc_dynpro      using 'SAPML01S' '0209'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_field       using 'BDC_CURSOR'
                              'RL01S-LGNUM'.
perform bdc_transaction using 'LS24'.
may be it will help u

Similar Messages

How to replace 'CALL DIALOG' with 'CALL TRANSACTION'

IF NOT bkpf-bukrs IS INITIAL.
    CLEAR   buztab.
    REFRESH buztab.
    buztab-zeile = bseg-buzei.
    buztab-bukrs = bkpf-bukrs.
    buztab-belnr = bkpf-belnr.
    buztab-gjahr = bkpf-gjahr.
    buztab-buzei = bseg-buzei.
    APPEND buztab.
    buztab-zeile = bseg-buzei.
    x_nochange = 'X'.
    CALL DIALOG 'RF_ZEILEN_ANZEIGE'
         EXPORTING
              buztab
              buztab-zeile
              tcode        FROM 'FB03'
              x_nochange
         IMPORTING
              buztab
              x_commit.
ENDIF.
CLEAR bkpf.
CLEAR bseg.
The above given is the part of a code. I need to replace the CALL DIALOG part with CALL TRANSACTION. Can any one plz suggest me how to go ahead with it?

Javascript. window.open();

Problems executing batch input with call transaction

When I execute BI with Call transaction the fields disabled are enabled and I do not know why. How to resolve it? I do not want them to be enabled

Can you provide us the BI Program name and Transaction Code???
Regards
Eswar

Problem with "Call Transaction" which calls a view cluster

Hi Colleagues ,
I have a rare issue with the call transaction , here is the use case for it :
1> I call a transaction(calls a screen X) in a report ,
2> I have a button in the screen , which calls another transaction(calls a screen X2) .
3> On the screen X2 i have another button which calls transaction (calls the view cluster ).
problem :
i'm not able to see the navigation pane in the view cluster on the left. its missing .
but when the view cluster is called direclty , i'm able to see the navigation pane in the view cluster ..
My initial doubt was , is this the problem with nesting of 'Call Transaction' calls ????
please answer the thread , i have to fix this ASAP.
regards,
Dilip

problem solved.

Issue with calling custom function in merge command -10g

Hi,
I have ran into issue while calling a custom function in merge command.
It throws error 'Invalid identifier'. Oracle doesnt understand that it is a function and take the function name as column name.
Since no such collumn name exists, it throws 'Invalid identifier'.
Interestingly, merge command works fine when it has a oracle function (replace, decode).
The oracle version is 10.2.0.3
It is very urgent.
Any pointers will be helpful.
Regards,
Ravi

I don't have privileges to create dblink, but this is working for me.
So, i don't think function can be a issue here.
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Elapsed: 00:00:01.02
satyaki>
satyaki>
satyaki>create table hist_tab
2     as
3       select * from emp
4       where sal between 2000 and 4000;
Table created.
Elapsed: 00:00:00.09
satyaki>
satyaki>select * from hist_tab;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
      7844 TURNER     SALESMAN        7698 08-SEP-81       2178          0         30 SALESMAN
Elapsed: 00:00:00.00
satyaki>
satyaki>
satyaki>update hist_tab
2     set mgr = 7794;
1 row updated.
Elapsed: 00:00:00.01
satyaki>
satyaki>commit;
Commit complete.
Elapsed: 00:00:00.00
satyaki>
satyaki>select * from hist_tab;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
      7844 TURNER     SALESMAN        7794 08-SEP-81       2178          0         30 SALESMAN
Elapsed: 00:00:00.00
satyaki>
satyaki>
satyaki>
satyaki>
satyaki>create table tran_tab
2     as
3       select * from emp
4       where sal between 2000 and 7000;
Table created.
Elapsed: 00:00:00.00
satyaki>
satyaki>select * from tran_tab;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
      7844 TURNER     SALESMAN        7698 08-SEP-81       2178          0         30 SALESMAN
      7902 FORD       ANALYST         7566 03-DEC-81    5270.76                    20 ANALYST
Elapsed: 00:00:00.00
satyaki>
satyaki>ed
Wrote file afiedt.buf
1 create or replace function fun(c_in number)
2     return number
3     is
4       c_out number(4);
5     begin
6       if c_in < 7900 then
7          c_out := 0;
8       else
9         c_out := 1;
10       end if;
11       return c_out;
12*    end;
13 /
Function created.
Elapsed: 00:00:01.00
satyaki>
satyaki>merge into hist_tab o
2 using (
3     select empno,
4            ename,
5            job,
6            mgr,
7            hiredate,
8            sal,
9            comm,
10            deptno,
11            job1,
12            dob
13     from (
14              select k.*,
15                     rank() over(order by fun(k.empno)) rn
16              from tran_tab k
17          )
18     where rn = 1
19     ) n
20 on ( o.empno = n.empno)
21 when matched then
22    update set o.ename = n.ename,
23               o.job = n.job,
24               o.mgr = n.mgr,
25               o.hiredate = n.hiredate,
26               o.sal = n.sal,
27               o.comm = n.comm,
28               o.deptno = n.deptno,
29               o.job1 = n.job1,
30               o.dob = n.dob
31 when not matched then
32    insert(
33            o.empno,
34            o.ename,
35            o.job,
36            o.mgr,
37            o.hiredate,
38            o.sal,
39            o.comm,
40            o.deptno,
41            o.job1,
42            o.dob
43          )
44    values(
45            n.empno,
46            n.ename,
47            n.job,
48            n.mgr,
49            n.hiredate,
50            n.sal,
51            n.comm,
52            n.deptno,
53            n.job1,
54            n.dob
55          );
1 row merged.
Elapsed: 00:00:00.03
satyaki>
satyaki>select * from hist_tab;
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO JOB1      DOB
      7844 TURNER     SALESMAN        7698 08-SEP-81       2178          0         30 SALESMAN
Elapsed: 00:00:00.00
satyaki>You can check the final output with old output. It is working perfectly - i guess.
Regards.
Satyaki De.

Issue with calling external web service with authentication details ...

Hi,
     I am facing a deployment issue with Oracle ESB. I am trying to call an external Web Service with authentication from ESB SOAP Service. It is working fine with my local ESB version 10.1.3.3.0 Build PCBPEL_10.1.3.3.0_GENERIC_070615.0525; however it is getting an error at our development ESB version 10.1.3.3.1 Build PCBPEL_10.1.3.3.1_GENERIC_RELEASE.
     I am getting following error.
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception during SOAP invoke: Server was unable to process request. ---> Object reference not set to an instance of an object.; nested exception is: javax.xml.rpc.soap.SOAPFaultException: Server was unable to process request. ---> Object reference not set to an instance of an object. at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.populateFaultMessage(WSIFOperation_JaxRpc.java:3086) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1728) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1473) at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1196) at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:867) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:770) at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:790) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:208) at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:127) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:118) at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:95) at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1424) at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:112) at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:307) at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispat
     Could one of you please help me out to understand why it is happining.
Thanks in advance.
Jyotirmoy.

Hi Mahesh,
One you are missing is authentication token or credentials.
Please refer to the following articles.
http://www.cleverworkarounds.com/2014/02/05/tips-for-using-spd-workflows-to-talk-to-3rd-party-web-services/
A Series of articles related to Web Service in SPD Workflow
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 1
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 2
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 3
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 4
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 5
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 6
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 7
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 8
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 9
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 10
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 11
Trials or tribulation?
Inside SharePoint 2013 workflows–Part 12
Please don't forget to mark it answered, if your problem resolved or helpful

ABAP prog with Call Transaction to SU01 will not add roles in a CUA client

I am modifying a current ABAP program that works in a non-CUA client to hopefully execute in a CUA client. This program performs a Call Transaction to tcode SU01 and adds roles to an existing user. I used tcode SHDB to identify the new BDC commands needed for CUA when using tcode SU01. When executing the program in the CUA client it does not save the roles to the user. There is no error message or abnormal termination.
When I assign the role to the same user that's referenced in my program directly with tcode SU01 it works fine. Its just when I run the ABAP program the role assigment is not retained. I opened a Customer Message with SAP and they referenced OSS Note 93802 and said this was a consulting question. My program is not abending as referenced in Note 93802, it just does not add the role.
Has anyone been able to get this to work in a CUA client?

Hi,
it should be fairly simple to create a new ABAP using the BAPI's related to business object USER. Call BAPI_USER_CREATE1 to create the users, and BAPI_USER_LOCACTGROUPS_ASSIGN to assign roles in a CUA environment. It should go something like this:
[read file with user data into internal table wt_users]
[read file with role assignments into internal table wt_roles]
Loop at wt_users into wa_user.
[create LOGINDATA, ADDRESS and other structures for user in BAPI below, based on the data in wa_user]
call 'BAPI_USER_CREATE1'
exporting
    username                      = [the user name from input file]
NAME_IN                       =
    logondata                     = [structure for logondata]
    password                      = [initial password value]
DEFAULTS                      =
    address                       = [address structure created above]
    [etc.]
if sy-subrc eq 0.
Assign roles for the user
clear wt_activitygroups. refresh wt_activitygroups.
loop at wt_roles into wa_roles where username = wa_user-username.
    [build an internal table, wt_activitygroups, for system/role assignments for the user]
endloop.
    call BAPI_USER_LOCACTGROUPS_ASSIGN
      exporting
        username                      = [the users name]
      tables
        activitygroups           = wt_activitygroups
        return                       = wt_return.
Endloop.
Ideally, you would have two input files: one with the user data (one record per user), and another one containing the data for the BAPI_USER_LOCACTGROUPS_ASSIGN (on the format USERNAME, SYSTEM, ROLENAME); one entry per line. You'd loop at the first table, containing the user data, then create the user, then loop at all entries in the system/role assignment file for the same username, building an internal table of role assignemnts; then call the second BAPI (provided there were any role assignments to assign for that user!)
Hope this makes sense. It's not rocket science really; you can omit most of the parameters of BAPI_USER_CREATE1, and the second BAPI is even simpler. You could consider validating the input data by checking entries in table USRSYSACT, which contains all valid system/role assignments as seen from the CUA system (this table gets updated every time you do a "text compare" from within SU01.
Regards,
Trond

Problem with call transaction and a query

Hi,
Whe have a query that has its own Z tcode, we are working with this "EXIT_SAPLCORF_103" within the tcode CO11N. Inside the include "ZXCOFU13" we call the query Tcode and it is displayed on screen but with no data.
The table "itbdcdata" record well the data of the inputs in the query recording so you can see with the WERKS and the number of reserve (3994) in the recording.
Why the call transaction display the query screen with no data...? and how can i pass the inputs to the query screen so it be executed.
Thanks on advance.
David Fúnez
Tegucigalpa, Honduras.
This is the recording:
AQZZZ_USER_GRMA=Z_QUERY_PP_003     1000X                                                                                BDC_CURSOR     SP$00002-LOW
                                                            BDC_OKCODE     =CRET
                                                            S_WERKS-LOW     1202
                                                            SP$00002-LOW           3994
                                                            %ALV     X
this is the code in the INCLUDE
*& Include           ZXCOFU13
DATA: itbdcdata TYPE bdcdata    OCCURS 0 WITH HEADER LINE,
      optoption TYPE ctu_params.
REFRESH itbdcdata.
CLEAR   itbdcdata.
itbdcdata-program = 'AQZZZ_USER_GRMA=Z_QUERY_PP_003'.
itbdcdata-dynpro   = '1000'.
itbdcdata-dynbegin = 'X'.
APPEND itbdcdata.
itbdcdata-fnam = 'BDC_CURSOR'.
itbdcdata-fval = 'SP$00002-LOW'.
APPEND itbdcdata.
itbdcdata-fnam = 'BDC_OKCODE'.
itbdcdata-fval = '=CRET'.
APPEND itbdcdata.
itbdcdata-fnam = 'S_WERKS-LOW'.
itbdcdata-fval = '1202'.
APPEND itbdcdata.
itbdcdata-fnam = 'SP$00002-LOW'.
itbdcdata-fval = caufvd_imp-rsnum.
APPEND itbdcdata.
itbdcdata-fnam = '%ALV'.
itbdcdata-fval = 'X'.
APPEND itbdcdata.
CLEAR optoption.
optoption-dismode = 'A'. "A is visible
optoption-updmode = 'S'.
CALL TRANSACTION 'ZRESV' USING itbdcdata OPTIONS FROM optoption.

problem solved.

Problem with CALL Transaction syntax

Hi All,
I have created a report in which Im displaying Sales order, planned order n production order details.
In the output if the user double clicks, anyone of the sales order/planned order/production order no, it has to take to concern transaction.
Sales order and planned order are perfectly working.
problem is with production order, it is not displaying, the exact order no.
my code:
WHEN '&IC1'.
      IF rs_selfield-fieldname = 'VBELN'.
     READ TABLE gt_final_so INTO wa_final_so INDEX rs_selfield-tabindex
        SET PARAMETER ID 'AUN' FIELD wa_final_so-vbeln.
        CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
      ELSEIF rs_selfield-fieldname = 'PLNUM'.
     READ TABLE gt_final_so INTO wa_final_so INDEX rs_selfield-tabindex.
        SET PARAMETER ID 'PAF' FIELD wa_final_so-plnum.
        CALL TRANSACTION 'MD13' AND SKIP FIRST SCREEN.
      ELSEIF rs_selfield-fieldname = 'AUFNR'.
     READ TABLE gt_final_so INTO wa_final_so INDEX rs_selfield-tabindex.
        SET PARAMETER ID 'ANR' FIELD wa_final_so-aufnr.
        CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
In debugging I checked, after call transaction, the system executing the following code, here CAUFVD-AUFNR is initial.
So, it has been picking some different no.
      Starten Batchrezept über Einsatzplanung - DO-THANH
MODULE GET_PARAMETER OUTPUT.
    IF CAUFVD-AUFNR IS INITIAL.
      GET PARAMETER ID 'BR1' FIELD *CAUFVD-AUFNR.
      IF NOT *CAUFVD-AUFNR IS INITIAL.
        CAUFVD-AUFNR = *CAUFVD-AUFNR.
      ENDIF.
    ENDIF.
ENDMODULE.                             " GET_PARAMETER OUTPUT
Pls help me how to resolve the above problem.
Valuable suggesstion will be highly appreciated.
regards,
Priya

Hi,
Note that the code as different Parameter id
you are setting the parameter 'ANR'
SET PARAMETER ID 'ANR' FIELD wa_final_so-aufnr.
Where as in that method it is reading the parameter id 'BR1'
GET PARAMETER ID 'BR1' FIELD *CAUFVD-AUFNR.
so try by setting the 'BR1' in set parameter.
ELSEIF rs_selfield-fieldname = 'AUFNR'.
     READ TABLE gt_final_so INTO wa_final_so INDEX rs_selfield-tabindex.
        SET PARAMETER ID 'BR1' FIELD wa_final_so-aufnr.
        CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
Regards,
Kiruba.

Problem with Call Transaction opt-RACOMMIT = 'X'.

Hello Experts
I am having a problem with call transction. I am calling a Z transaction in function module. Within the Z transaction I am furhter calling some function modules and doing commit work and then some more processing after the comit work inside So to make sure the code after comit work is fired I am using opt-RACOMMIT = 'X' in call transaction. Whenever I set this parameter opt-RACOMMIT = 'X' call transaction fails and gives error saying No batch Input data for screen XXXX. However the Z tcode processed succesfully.
By changing the Mode to E i found that it remians at the last screen of call transction after executing the Z transaction and never comes back
But if I donot use RACOMMIT = 'X' everything is fine. Please let me know if anyone came across such problem. Any help will be apreciated.
Thanks,
kamal

Hello,
as you said, if there is more than commit statement in your ztransaction, then you should put RACOMMIT to 'X'.
I think the problem is in your bdcdata: change it to be sure to get back to the 1st screen of your ztransaction. Then, at this point (1st screen) hit "back" button.
Cordialement,
Chaouki

Problem with call transaction KKS2

Hi all,
I am using call transaction method for KKS2 for variance calculation but it is not working.
Could you please let me know what can be the reason ? also do we need to use commit work after call transaction ?
Regards,
Anubhuti

HI ,
It's not working means, are you getting any error?
Did you refresh your BDCDATA internal table?
check the syntanx for call transaction. Paste some code for better understanding. so that it l be easy to resolve the issue.
Regards,
Pravin

Quality issues with calls from US to Korea

I've always been a big fan of Skype. I have a premium account and I use "Skype to go" to call from the US to South Korea. Starting about 5 months ago, the quality of these calls has severely degraded. It is almost not worth the call. It is very difficult for me to hear the people I've called and for them to hear me as well. There is no Skype customer support contact phone number listed anywhere on the Skype website that I can find. Otherwise, I'd be addressing this issue with a real person. Is there a reason for this call quality degradation? Is there a fix in work? Is there a customer service number I can call? Is it time for me to leave Skype?

rates are available on http://www.skype.com/en/rates/ just enter Itay in the destination and check the rates lower down the page.
If you are going to make a lot of calls - check the subscriptions available too...
There are subscriptions that include landlines and mobiles as well

BDC with call transaction VD02 works fin in A mode but not in N mode

Hi All,
I have BDC program developed in 4.6c using call transaction VD02 works fine with mode A but not with mode N.
Now we upgraded to ECC 6.0.Do I need to change anything?

No, you don't have to change anything for ECC. BTW, I wonder why VD02 is not working in the background for you?

FMDERIVE Slow with Call Transaction

HI Everyone,
I am calling FMDERIVE using call Transaction but it is very very slow.
Can anyone advise on how to improve the speed>
Here is an extraxt of my code:
CALL TRANSACTION C_TCODE USING i_bdc_tab MODE z_ctm
update 'S' MESSAGES INTO i_msg_tab.
Here C_TCODE = FMDERIVER
i_bdc_tab is:
Batch input data for call transaction
data: begin of i_BDC_TAB occurs 0.
include structure BDCDATA.
data: end of i_BDC_TAB.
I will appreciate your help

Well,
This is a CATT program that is beeing used and this ticket has come to me to improve the performance.
I still have to find a way to solve this issue.
Thanks

LT04 problems with call transaction

Hello,
I am using RF and creating screens for users to putaway material in a raw material warehouse based on a material document number from the GRN which is linked to a TR (transfer requirement). I am, however, having problems with the TO creation where the material is QM relevant.
I have used function module L_TO_CREATE_TR which works for non-QM relevant items but most of our items are QM relevant. I am trying to process these by creating a TO using LT04 as a call transaction.
However, before I can put in a bin , the screen that appears in order to enter the bin has an error message before anything has been input - 'No destination storage bin to be found in storage type 001 "(L3 009).
Anyone have any suggestions how I can get around this as I cannot create the TO in the background using LT04 because of this error.
Regards
Larissa Maryniuk

As mentioned in my original question, I cannot use the LTOCREATE_FROM_TR FM for items set with stock category Q as these are QM relevant. If you try and create a TO from a TR using L_TO_CREATE_TR you get an error of 2 which is item is QM relevant. I cannot see how I can use WS_LM_TRANSFER_ORDER_CREATE as you cannot put in the TR number anywhere. Other than these 2 cannot see how I can create a TO from a TR without using LT04.
If I use LT04 and set as backrground I get the message specified. The way to get around the error using LT04 is only available if T04 is set as Foreground on the front screen instead of background.
Anyone have any suggestions?
Edited by: Larissa Maryniuk on Jan 25, 2010 11:41 AM

2 issues with call transaction to LS24

Similar Messages

Maybe you are looking for