2 message areas in tab strip

Hi,
I am facing the following problem:
My application has 2 tabs in a tab strip. each tab hosts 1 view.
I need to have 1 message areas in each view.
However, if I define 2 message areas, one for each view, all the messages I raise, go to only one of the views...
Is it impossible to have 2 message areas in the application?
This is how i raise messages to the messager area:
errorMsg = wdComponentAPI.getTextAccessor().getText(IMessageTaskList.MSG__TASK__NAME__ALREADY__EXISTS);
wdComponentAPI.getMessageManager().reportException(errorMsg, true);
Please assist.
Reagrds,
Oren.

Hi,
Create a event handler on onSelect of the tab Control UI.
Map the parameter tab as one of the parameter.
@tab will return you the currently selected tab.
Your method signature will be as shown below
public void onActionTabSelectionChange(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent, java.lang.String tabName )
tabName should be mapped to tab.
write the following code snippet in wdDoModify
if(firstTime)
IWDTabStrip tabStrip = (IWDTabStrip)view.getElement("tab");
                 IWDParameterMapping mapping = tabStrip.mappingOfOnSelect();
                 mapping.addSourceMapping("tab", "tabName");
Regards
Ayyapparaj
Message was edited by:
        Ayyapparaj KV

Similar Messages

Messages issue in message area of Tab Strip

Hi ,
Iu2019m having 2 tabs in my Tab strip.
Tab1 u2013 First tab.
Tab2 u2013 Second tab.
In both the tabs I have message areas.
On click of a button in Tab1, iu2019m displaying an error message in the message area,
but the same message is appearing in the message area of the tab2.
I want to display messages to its corresponding tab only.
Thanks,
Shravan

Hello Shravan,
the message area is a common container so the messages that are raised in that serverrountrip will be displayed in all the message area ui element.
solution would be to create an action handler method for the tabStrips' onSelect event (inorder to trigger the server roundtrip). this roundtrip will flush the stateless messages and you can raise new messages for second tab elements.
hope this solves your problem.
BR, Saravanan

After upgrading to 3.6.12 my browser is not opening pop-up windows and while closing the browser giving a message that some tabs are open and shall the same be closed? I have not encountered this problem with eralier version. Is there any known issues?

Some of my web pages open a new pop-up window for entering credentilas and display sensitive information. After upgrading t0 3.6.12 i found that firefos is not opening pop-up windows (earlier version allowed). When I close the browser, it gives a quit message saying there are unclosed tabs and windows of firefox. shall they be saved for next time start.
Also observed that the memory usage (from Task manager)is very high compared to earlier ones and the process is not closed even if I close the browser.

3.6.13 is also behaving similarly.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

I am unable to see any POP3 or IMAP tab when I set up an account in my iphone 4S. Hence by default all my email accounts become IMAP and the messages are deleted from the server when I delete them from the iphone.

ok sorry everyone but i solved it myself but the solution is so nuts i've posted it here to help others who have the same problem.
to setup a comcast imap account on your iphone:
go to mail, contacts, etc in settings
under accts, select add account
select "other"
new screen, choose "add mail account"
now on the new acct screen you must enter your name, email address and password for your GMAIL acct ! (yes i said your gmail acct !, or some other acct with a NON comcast address).
hit next
then the acct verifies
when verified a screen will open with all the acct settings for this acct AND @ the top of the screen are the 2 buttons > imap or POP
select imap and THEN CHANGE ALL THE ACCOUNT information to the comcast account !
then hit next and the account will take a couple minutes to verify but it will verify and now you have a comcast imap acct set up on your iphone. The problem must be that when the iphone sends the initial verify acct info to comcast (if you enter that information first) the comcast server is simply not setup yet to signal the iphone that there is an imap option.

User changes in tab strip ui element are not recorded in context change log

Hi All,
We are using a tab strip ui element in webdynpro component. But user changes inside tab strip ui element are not getting recorded to the context change log. I have an input field on the same view besides tab strip ui element. User changes to this input field are getting recorded to the context change log.
Is there any restriction on context change log usage with tab strip ui element?
Could you please suggest If there is any way to record changes inside tab strip ui element.
Thanks,
Sudheer.

I think there are some limitations exists, context change logs are not complete when you do value help , i am not sure about tab strip.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm]

How to pass error message for an additional tab strip in MIGO

Hi,
I have created one additional tab strip in MIGO transaction,In that tab i have 5 text fields,In that 4 text fields i want to make as mandatory fields,In the existing screen MIGO is using " Application log" for passing any error message It is calling as include program in SAPLMIGO report program,In that "lmigolo2 " is the include program name.Now i am struggling how to make use that in my newly created screen.
Regards
Ambili B

Hi rahul,
Can u try these
:Object failed to run due to an error while processing on the Job Server.
2 )Object failed to run due to an error
3 )Object failed to run due to an error while proc... | SCN

Open tabs are not on tab strip. Have to click on List All Tabs button to find tabs. Tabs used to display on tab strip and stopped doing this. Suggestions?

Been using Firefox for years, running Windows XP. This morning when I opened pages in another tab, did not see them on tab strip. Only way to find them is to click on List All Tabs Button and it shows list. Cannot get them to display on tab strip. If I open in another window, it works, like it should. If I click on plus sign on tab strip it opens another tab, but can't see the previous ones except with List All Tabs Button. Any suggestions on how to turn tab strip back on? Thanks, jayem33

If it works in a new window then you can drags tabs from the not working window to that new window.
You can also try to close the tabs via Ctrl+W and restore the closed tabs via Shift+Ctrl+T

How to Disable message area

Hi ,
   I have a message area and i had linked the "Enable" property of the message area to the context attribute , even if i set the Contex attribute to TRUE the message is still disabled , can some one explain me how to disable message area by linking to the context attribute.
Regards,
Ravi.

HI Shriram,
           Let me explain my problem . I have two tabs in my tab strip control and each tab has its own message area , but the problem is when 2nd tab is selected and if i raise some exception is doesnt show in the message area of the 2nd tab as it is taking the first tab message area as default , so i had put the following logic in the modifyview.
   <b>if(selectedTab.equals("Tab1"))
             IWDMessageArea Tab2MsgArea =(IWDMessageArea) view.getElement("Tab1MessageArea");
             Tab2MsgArea.setEnabled(false);
             IWDMessageArea Tab1MsgArea =(IWDMessageArea) view.getElement("Tab1MessageArea");
             Tab1MsgArea .setEnabled(true);
        else
            IWDMessageArea Tab2MsgArea =(IWDMessageArea) view.getElement("Tab1MessageArea");
             Tab2MsgArea.setEnabled(true);
             IWDMessageArea Tab1MsgArea =(IWDMessageArea) view.getElement("Tab1MessageArea");
             Tab1MsgArea .setEnabled(false);
        }</b>
   This logic is working fine for most of the cases , but When i selcect a TAB, in the event handler of the selection, i am performing some logic and raising exceptions, for these exceptions it is not working fine as my event handler is fired first before the "WDModifyView" . Is there any other way to control the "ENABLE" property of the MessageAreas.

Sent Messages are not saved in Sent Mailbox

It was working correctly but suddenly all my sent messages are not saved in the Sent Mailbox. I follow all the Mail Help instructions but nothing seems to work. Hope that someone can help me. I asked for help on december 14 but it was not helpful

The mailboxes drawer contains all mailboxes under In, Drafts, Sent, Trash and Junk (if you have Junk Mail set to automatic).
If you have a .Mac or IMAP type account, you also have an account named icon for the .Mac or IMAP type account at the bottom of the mailboxes drawer. It is named by the Account Description you provided/entered for the account under the Account Information tab for the account preferences.
If you select save Sent messages on the server for a .Mac or IMAP type account, the account's Sent mailbox will be available under the account named icon in the mailboxes drawer along with all other server stored mailboxes.
To open the account named icon for your .Mac account to reveal the server stored mailboxes including the account's Sent mailbox, select the black triangle beside your .Mac account icon in the mailboxes drawer pointing it down.
Select the account's Sent mailbox and at the menu bar, go to Mailbox > Use This Mailbox For and select Sent.
If you deselect store Sent messages on the server for the account preferences, the account's Sent mailbox will be available under Sent in the mailboxes drawer and you can't use "Use This Mailbox For" for mailboxes stored locally on the hard drive. It can only be used for .Mac or IMAP type account mailboxes that are stored on the server.

Creation of Tab Strips control

Hi Guy's,
Please help me How to create the Tacbstript control in Screen painter(SE51) step-by-step procedure.
Thanks,
Sai

Hi,
Very good docu....
Tabstrip Controls
A tabstrip control is a screen object consisting of two or more pages. Each tab page consists of a tab title and a page area. If the area occupied by the tabstrip control is too narrow to display all of the tab titles, a scrollbar appears, allowing you to reach the titles that are not displayed. There is also a pushbutton that allows you to display a list of all tab titles.
Tabstrip controls allow you to place a series of screens belonging to an application on a single screen, and to navigate between them easily. The recommended uses and ergonomic considerations for tabstrip controls are described in the Tabstrip Control section of the SAP Style Guide.
From a technical point of view, a tab page is a subscreen with a pushbutton assigned to it, which is displayed as the tab title.
The tabstrip control is the set of all the tab pages. Tabstrip controls are therefore subject to the same restrictions as subscreens. In particular, you cannot change the GUI status when you switch between pages in the tabstrip control. However, they are fully integrated into the screen environment, so present no problems with batch input.
To use a tabstrip control on a screen, you must be using a SAPgui with Release 4.0 or higher, and its operating system must be Motif, Windows 95, MacOS, or Windows NT with version 3.51 or higher.
When you create a tabstrip control, you must:
Define the tab area on a screen and the tab titles.
Assign a subscreen area to each tab title.
Program the screen flow logic.
Program the ABAP processing logic.
You must then decide whether you want to page through the tabstrip control at the SAPgui or on the application server. In the first case, each tab page has its own subscreen. In the second, there is a single subscreen area that is shared by all tab pages.
Defining the Tabstrip Control Area and Tab Titles
You define both the tabstrip area and the tab titles in the screen layout.
The tabstrip area has a unique name and a position, length, and height. You can also specify whether the tabstrip area can be resized vertically or horizontally when the user resizes the window. If the area supports resizing, you can specify a minimum size for it.
When you define a tabstrip area, it already has two tab titles. Tab titles are technically exactly the same as pushbuttons. To create additional tab titles, simple create pushbuttons in the row containing the tab titles. Tab titles have the same attributes as pushbuttons, that is, each has a name, a text, and a function code. You can also use icons and dynamic texts with tab titles.
Assigning a Subscreen Area to a Tab Title
You must assign a subscreen area to each tab title. There are two ways of doing this:
Paging in the SAPgui
You need to assign a separate subscreen area to each tab title, and define the function codes of the tab titles with type P (local GUI function). In the screen flow logic, you call all the subscreens in the PBO event. This means that all of the tab pages reside locally on the SAPgui.
When the user chooses a tab title, paging takes place within the SAPgui. In this respect, the tabstrip control behaves like a single screen. In particular, the PAI event is not triggered when the user chooses a tab title, and no data is transported. While this improves the performance of your tabstrip control, it also has the negative effect that when the user does trigger the PAI event, all of the input checks for all of the subscreens are performed. This means that when the user is working on one tab page, the input checks may jump to an unfilled mandatory field on another page.
Local paging at the SAPgui is therefore most appropriate for screens that display data rather than for input screens.
Paging on the Application Server
One subscreen area is shared by all tab titles and called in the PBO event. You define the function codes of the individual tab titles without a special function type. When the user chooses a tab page, the PAI event is triggered, and you must include a module in your flow logic that activates the appropriate tab page and assigns the correct subscreen to the subscreen area.
Since the PAI event is triggered each time the user chooses a tab title, this method is less economical for the application server, but the input checks that are performed only affect the current tab page.
Procedure in Either Case
You create the subscreen areas within the tabstrip area. You assign the subscreen areas to one or more tab titles in the Screen Painter by selecting one or more titles. You can also assign a subscreen area to a tab title in the tab title attributes by entering the name of the subscreen area in the Reference field attribute.
The procedure for the alphanumeric Screen Painter is described under Creating Tabstrip Controls.
If you are paging at the SAPgui, create a subscreen area for each tab title. If you are paging at the application server, select all tab titles and create a single subscreen area. The subscreen areas may not cover the top line of the tab area. However, within a tab area, more than one subscreen area can overlap.
Programming the Flow Logic
In the flow logic, all you have to do by hand is include the correct subscreens. The screen flow and data transport to the ABAP program is the same as for normal subscreens. There are two ways of programming the screen flow logic, depending on how you have decided to page through the tabstrip control.
Paging in the SAPgui
When you page in the SAPgui, you must include a subscreen for each subscreen area:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN: <area1> INCLUDING [<prog 1>] <dynp 1>,
                  <area2> INCLUDING [<prog 2>] <dynp 2>,
                  <area3> INCLUDING [<prog 3>] <dynp 3>,
PROCESS AFTER INPUT.
CALL SUBSCREEN: <area1>,
                  <area2>,
                  <area3>,
Paging on the Application Server
When you page on the application server, you only have to include a subscreen for the one subscreen area:
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN <area> INCLUDING [<prog>] <dynp>.
PROCESS AFTER INPUT.
CALL SUBSCREEN <area>.
Handling in the ABAP Program
Before you can use a tabstrip control in your ABAP program, you must create a control for each control in the declaration part of your program using the following statement:
CONTROLS <ctrl> TYPE TABSTRIP.
where <ctrl> is the name of the tabstrip area on a screen in the ABAP program. The control allows the ABAP program to work with the tabstrip control. The statement declares a structure with the name <ctrl> . The only component of this structure that you need in your program is called ACTIVETAB.
Use in the PBO event
Before the screen is displayed, you use the control to set the tab page that is currently active. To do this, assign the function code of the corresponding tab title to the component ACTIVETAB:
<ctrl>-ACTIVETAB = <fcode>.
When you page at the SAPgui, you only need to do this once before the screen is displayed. This initializes the tabstrip control. The default active tab page is the first page. After this, the page activated when the user chooses a tab title is set within SAPgui.
When you page on the application server, you must assign the active page both before the screen is displayed for the first time, and each time the user pages. At the same time, you must set the required subscreen screen.
You can suppress a tab page dynamically by setting the ACTIVE field of table SCREEN to 0 for the corresponding tab title.
Use in the PAI event
In the PAI event, ACTIVETAB contains the function code of the last active tab title on the screen.
When you page in the SAPgui, this allows you to find out the page that the user can currently see. When you page at the application server, the active tab page is controlled by the ABAP program anyway.
The OK_CODE field behaves differently according to the paging method:
Paging in the SAPgui
When you page in the SAPgui, the PAI event is not triggered when the user chooses a tab title, and the OK_CODE field is not filled. The OK_CODE field is only filled by user actions in the GUI status or when the user chooses a pushbutton either outside the tabstrip control or on one of the subscreens.
Paging on the application server
If you are paging at the application server, the PAI event is triggered when the user chooses a tab title, and the OK_CODE field is filled with the corresponding function code.
To page through the tabstrip control, you must assign the function code to the ACTIVETAB component of the control:
<ctrl>-ACTIVETAB = <ok_code>.
This statement overwrites the function code of the last active tab page with that of the new tab title. At the same time, you must ensure that the correct subscreen is inserted in the subscreen area.
Otherwise, tabstrip controls are handled like normal subscrens in ABAP programs, that is, the ABAP program of a subscreen screen must contain the dialog modules called from the flow logic of the subscreen.
Examples
Tabstrip control, paging at SAPgui
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ENDIF.
ENDMODULE.
The next screen (statically defined) for screen 100 is itself. It has the following layout:
The screen contains a tabstrip area called MYTABSTRIP with three tab titles PUSH1, PUSH2 and PUSH3. The function codes have the same name, and all have the function type P. One of the subscreen areas SUB1 to SUB3 is assigned to each tab title. The pushbutton has the name BUTTON and the function code OK.
In the same ABAP program, there are three subscreen screens 110 to 130. Each of these fits the subscreen area exactly. The layout is:
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN: SUB1 INCLUDING SY-REPID '0110',
                  SUB2 INCLUDING SY-REPID '0120',
                  SUB3 INCLUDING SY-REPID '0130'.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN: SUB1,
                  SUB2,
                  SUB3.
MODULE USER_COMMAND.
The screen flow logic of subscreens 110 to 130 does not contain any module calls.
When you run the program, a screen appears on which the second tab page is active, since the program sets the ACTIVETAB component of the structure MYTABSTRIP to PUSH2 before the screen is displayed. The user can page through the tabstrip control without the PAI event being triggered. One of the three subscreens is included on each tab page.
When the user chooses Continue, the PAI event is triggered, and an information message displays the function code of the tab title of the page that is currently active.
Tabstrip control with paging on the application server.
REPORT DEMO_DYNPRO_TABSTRIP_LOCAL.
CONTROLS MYTABSTRIP TYPE TABSTRIP.
DATA: OK_CODE TYPE SY-UCOMM,
      SAVE_OK TYPE SY-UCOMM.
DATA NUMBER TYPE SY-DYNNR.
MYTABSTRIP-ACTIVETAB = 'PUSH2'.
NUMBER = '0120'.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'SCREEN_100'.
ENDMODULE.
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE.
MODULE USER_COMMAND INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
IF SAVE_OK = 'OK'.
    MESSAGE I888(SABAPDOCU) WITH 'MYTABSTRIP-ACTIVETAB ='
                                  MYTABSTRIP-ACTIVETAB.
ELSE.
    MYTABSTRIP-ACTIVETAB = SAVE_OK.
    CASE SAVE_OK.
      WHEN 'PUSH1'.
        NUMBER = '0110'.
      WHEN 'PUSH2'.
        NUMBER = '0120'.
      WHEN 'PUSH3'.
        NUMBER = '0130'.
    ENDCASE.
ENDIF.
ENDMODULE.
The statically-defined next screen for screen 100 is itself, and its layout is the same as in the above example. However, the function codes of the three tab titles have the function type <blank> and they all share a single subscreen area SUB.
The same subscreen screens 110 to 130 are defined as in the last example.
The screen flow logic for screen 100 is as follows:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
CALL SUBSCREEN SUB INCLUDING SY-REPID NUMBER.
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
CALL SUBSCREEN SUB.
MODULE USER_COMMAND.
In this example, the program includes a subscreen screen in the subscreen area SUB dynamically during the PBO event.
The screen flow logic of subscreens 110 to 130 does not contain any module calls.
This example has the same function as the previous example, but the paging within the tabstrip control is implemented on the application server. Each time the user chooses a tab title, the function code from the OK_CODE field is assigned to the ACTIVETAB component of structure MYTABSTRIP. At the same time, the variable NUMBER is filled with the screen number of the subscreen that has to be displayed in the subscreen area SUB of the tabstrip control.
Pls. reward if useful...

Messages are failed in Adapter Engine

Hi Experts,
give me solution as early as possible pls
There is a problem with production system in XI.
I am getting the error in Adapter Engine level in Runtime workbench.
"Attempt to process file failed with
com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution:
com.sap.aii.adapter.file.varsubst.VariableDataSourceException: Caught SAXException while parsing XML payload:Fatal Error:com.sap.engine.lib.xml.parser.parserException: XMLparser: No data allowed here(:main:,row:,col:75)"
The scenario is IDOC to JMS & File.
There are 2 conditions
if the data is coming from ECC is valid then Msg will go to the JMS
other wise it will be dropped into File System.There is no problem with valid data.
when ever invalid data will come 70% Messages are processed succefully and few Messages not processed.
if i resend this error message 2 or 3 times it is processed succefully, iam getting huge number of messages like this,
it is difficult to resend because if i select all Msg's it is not processed only one Msg will be processing when iam trying to re-send
please can any body give me the permanent solution for it.
Thanks & Regards
Sankar

Well,
Take account the following considerations.
1. Check your source code for the variable substitution(Maybe you can show us).
2. check in the tab "Advanced" on you file adapter configuration, there are many checkBox, for example is you are replcainf the file name in you mapping The "File Name" check(in Adapter specific attributes) has to be checked, and if you are using other variables you need to do the same.
I hope It helps you.
Ivan

OSX: 10.9.4 Safari: 7.0.5 message: "Are you sure you want to send a form again?"

My system:
Mac Mini
Processor 2.6 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Mavericks 10.9.4 (13E28)
Safari 7.0.5
Most annoying message keeps coming up on several websites.
If you go here:
http://www.bedbathandbeyond.com/store/s/laundry-sorter
and click on the "Honey-Can-Do® Wicker Corner Hamper"
and once in that item's site, you click to go back, I'm getting
a message, "Are you sure you want to send a form again?"
I don't enter anything into the screen of the item. All I do is
look at it, and try to click back and I keep getting this annoying
message.
And it happens with all other items on the BBB site.
How to turn off this blankety-blank message??
Its such a pain to have to keep clicking "Send" !!
HALP!!

Hi ...
I followed your instructions, went back a page but no warning on Safari. Might be a cookies, cache, or extensions issue.
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If nothing above helped, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Sent messages are no longer saved

Hi guys!
Mail does no longer save my sent messages although the setting are set that way! Any suggestions? It's pretty annoying because you never know if messages are sent. I also doesn't make that "sending sound" anymore.
Thanks for your help - will try to help you too if i know answers...
luc

If store sent messages on the server is not selected under the Mailbox Behaviors tab for the account preferences, quit Mail first and using the Finder go to Home > Library > Mail > Mailboxes > Sent Messages (name of your IMAP account in parenthesis).mbox.
Confirm there is only one Sent Messages.mbox folder for this account in the Mailboxes folder.
If so, move this mailbox folder to the Desktop.
Launch Mail and a new Sent Messages.mbox folder for the account will be created automatically by Mail within the Mailboxes folder when sending the next message with the account. Send a test message to yourself to confirm if the sent message is available within the account's Sent mailbox under Sent in the mailboxes drawer.
If so, you can use the Import Mailboxes feature to import the old Sent Messages.mbox for this account moved to the Desktop.

Messages are not moving to Error Queue in OSB if Error is Raised

Hi All,
My OSB process is as below.
Queue1-->OSB-->Queue2.
OSB Proxy is listening to the Queue1.When messages comes to Queue1 Proxy will pick the message and after applying the business logic it will put the message to Queue2.
If OSB is not able to deliver the message succesfully to Queue2 then it should retry for 2 times.If retry exhausted then the message should move to the error Queue.
I have configured Queue 1 with delivery failure paramaters redelivery limit and redelivery delay.Also the Connection factory is XA enabled.Even if any error happens (i am not using reply activity in the error handler) its retrying infinitely and messages are not coming to the error Queue.If i use reply activity its not retrying its failing at first time and the message is moved out of the main Queue1.
Can any one please help me on this?
Thanks.
Edited by: 892479 on Dec 21, 2011 6:31 AM

Since the messages are getting retried, it means that messages are getting rolled back to Queue1 when any errors happen. So transactional behavior is configured correctly.
Now the problem yu face is that the messages are not moving to error queue.
Make sure that you have configured following in the delivery failure tab of the queue>
Redelivery Delay Override - delay in miliseconds between retries
Redelivery Limit - number of retries
Expiration Policy - Redirect
Error Destination - Choose the error queue here
After that make sure that the Server is restarted, even though a server restart sign is not mentioned on the config page, some of these settings might not take effect without a restart.

Messages are in Backlog without any status

Hi All,
Today morning when I came and observed that, in the Engine-Status page i saw some 3000 messages under column
"Processing Backlog (without errors)". When I went into Messaging Overview Tab, I see these messages are in 'To Be Delivered' status. Now How to reprocess these messages? Can anyone tell me how come out from this situation?
Regards,
Rahul

Hi Achaari,
This is related to Queues problem.U r messages are struck in Queues.Please do following steps.
1)Go to SMQ2.Then check ur queues.if u found any queues just select it and activate the queue.It will automatically sent the data.
2)Go to SXMB_ADM->Manage Queues->Register Queues->Activate Queues.Before doing this activity in SXMB_ADM please delete or activate the queues in SMQ2 other wise it will give error.
3)Cancel the System Error Messages in Adapter engine in RWB Message Monitoring.
4)Refresh Cache Objects SXI_CACHE.
Thanks
Ravi

2 message areas in tab strip

Similar Messages

Maybe you are looking for