2 Node RAC with Single Node Standby Help

Hello Everyone -
I'm preparing to set up a 2 node RAC and use a single-node standby database.
I'm a bit confused on how to set up the Standby Redo Logs on the standby to use the LGWR functionality from the RAC instances.
Should I just create a set of standby redo logs (alter database add standby logfile...) like on a single-instance environment or do I need to create standby logfile threads (alter database add standby logfile thread. . . ) one for each cooresponding thread on the RAC?
It just seems odd that 2 RAC redo threads are able to write to one standby redo logfile at the same time (or maybe each RAC redo thread picks the first available standby redo log and writes to it??)
If anyone has some advice or insight, I'd appreciate it.
Andy

Hello Andy,
Did you get answer to your question about RAC with single standby?
Could you please share with me your experience if you have done so.
Thanks
Amit

Similar Messages

Resizing redo log files on a 3 node RAC with single node standby database

Hi
On a 3 node 11g RAC system,I have to resize the redo logs on primary database from 50M to 100M. I was planning to do the following steps:
SQL> select group#,thread#,members,status from v$log;
GROUP# THREAD# MEMBERS STATUS
1 1 3 INACTIVE <-- whenefver INACTIVE, logfile group can be dropped
2 1 3 CURRENT & resized, switch logfile can change logfile group
3 1 3 INACTIVE
4 2 3 INACTIVE
5 2 3 INACTIVE
6 2 3 CURRENT
7 3 3 INACTIVE
8 3 3 INACTIVE
9 3 3 CURRENT
9 rows selected.
SQL> alter database drop logfile group 1;
Database altered.
SQL> ALTER DATABASE ADD LOGFILE THREAD 1
GROUP 1 (
'/PROD/redo1/redo01a.log',
'/PROD/redo2/redo01b.log',
'/PROD/redo3/redo01c.log'
) SIZE 100M reuse; 2 3 4 5 6
Database altered.
However I am not sure what needs to be done for the standby. The standby_file_management is set to auto and it is single instance standby.
SQL> select group#,member from v$logfile where type='STANDBY';
GROUP#
MEMBER
10
/PROD/flashback/PROD/onlinelog/o1_mf_10_7b44gy67_.log
11
/PROD/flashback/PROD/onlinelog/o1_mf_11_7b44h7gy_.log
12
/PROD/flashback/PROD/onlinelog/o1_mf_12_7b44hjcr_.log
Please let me know.
Thanks
Sumathy

Hello;
For Redo and Standby redo this won't help :
standby_file_management is set to auto
On the Standby cancel recovery, then drop and recreate the redo and or Standby redo.
Then start recovery again.
Example ( I have a habit of removing the old file at the OS to avoid REUSE and conflicts )
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;
SQL> ALTER SYSTEM SET STANDBY_FILE_MANAGEMENT='MANUAL';
alter database add standby logfile group 4
('/u01/app/oracle/oradata/orcl/standby_redo04.log') size 100m;
ALTER SYSTEM SET STANDBY_FILE_MANAGEMENT='AUTO'
Notes worth reviewing :
Online Redo Logs on Physical Standby [ID 740675.1]
Error At Standby Database Ora-16086: Standby Database Does Not Contain Available Standby Log Files [ID 1155773.1]
Example of How To Resize the Online Redo Logfiles [ID 1035935.6]
Best Regards
mseberg

2 Node RAC to single node clonning

Hello,
We have 2 Node RAC database for R12 EBS on production now we want to refresh developement enviorenment which is single node so now can anybody tell me process to follow this or any documentaion for same.
Regards
Saransh Soni

Hi Saransh,
Please refer to similar threads in past :
convert RAC to single instance ebs R12
Re: Clone Oracle Apps 11.5.10.2 RacDB to Non-RAC DB
Regards
Rajesh

12.1.3 EBS single node 11.2.0.3 database to 2 node RAC with ASM

Hi,
We are planning to convert single node local/ordinary file system 11.2.0.3 database to 2 node RAC with ASM.
Please help me in creating the roadmap for the same.
e.g
1. Create the shared raw file system
2. Create diskgroup for ASM
3.. Convert the local file system to ASM first
etc, etc
This is the first big task hence need expert guidance.

Please refer to:
Using Oracle 11g Release 2 Real Application Clusters with Oracle E-Business Suite Release 12 (Doc ID 823587.1)
Oracle E-Business Suite Release 12 High Availability Documentation Roadmap (Doc ID 1072636.1)
Thanks,
Hussein

Creating DR standby from RAC to single NODE

OS and Database versions Primary:
node1:- OEL 5.7
node2:- OEL 5.7
inst1:- prod1 Oracle 11.2.0.3
inst2:- prod2 Oracle 11.2.0.3
Standby:
OEL 5.7
Oracle 11.2.0.3
NOTE:- Creating Standby on Single node.
My scenario:
============
node1:- linuxdb1
node2:- linuxdb2
inst1:- prod1
inst2:- prod2
Point1:- We have 2 node RAC with ASM disk and database is okay. Now i want to make DR on single node with ASM disk created already.
Point2:- grid and oracle users are on RAC prod database & also same grid and oracle users on SINGLE node DR
Point3:- Took RMAN backup from prod database ( 2 node RAC ) and copied to DR as shown below:
RMAN>backup device type disk format '/u02/stby/%U' database plus archivelog;
RMAN>backup device type disk format '/u02/stby/%U' current controlfile for standby;
scp -rp /u02/stby/* [email protected]:/u02/stby/
Point4:- Now when i run below command on DR ( oracle@linuxdr2 )
[oracle@linuxdr2 stby]$ rman target sys/pwd@prod1 auxiliary /
Recovery Manager: Release 11.2.0.3.0 - Production on Sun Mar 10 13:18:20 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD (DBID=220323208)
connected to auxiliary database: PROD (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 10-MAR-13
using target database control file instead of recovery catalog
configuration for DISK channel 2 is ignored
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=1142 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 10-MAR-13
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u02/stby/33o464m6_1_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/10/2013 13:19:22
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred
Can you please help me to resolve the issue.
Thanks,
Vikhar

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/10/2013 13:19:22
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred Any errors in alert log file?
Have you tried once again ?
Why cant you go for RMAN duplicate from active database, If you have any concerns then enable trace of RMAN and share the information
rman target / log=/u01/test/rman_log.txt trace=/u01/test/rmantrace.log

How do i licence a two node RAC with ASM infrastructure

AM trying to estimate the licensing of two node RAC with ASM as storage manager and GRID control as management tool

Hi,
Oracle license depends on lot of things, Edition of Oracle your running standard or enterprise, the optional packges you need and etc.
Read through http://docs.oracle.com/cd/E11882_01/license.112/e10594/editions.htm#BABDJGGI
also if you license named users or processor. You can get the price for the from online oracle store
https://oraclestore.oracle.com/OA_HTML/ibeCCtdMinisites.jsp?language=US&ref=ibeCZzpHome.jsp

2 node RAC: one 10gR2 node and one 11.2.0.3 node on Solaris 10.

Is it possible to have a mixed Oracle version 2 node RAC with 10gR2 database on one machine and 11.2.0.3 database installed on the other machine. Has anyone done this?

Hi,
if you are talking about setting up a RAC, and having a database 10g running on one node, and a different database 11g running on the other node this is possible.
You will have to use the newest clusterware/GI (11.2.0.3) and multiple Oracle Homes (One for 10g and one for the 11.2.0.3).
If however you want one database with 2 instances running different versions: Then No.
Regards
Sebastian

Standby setup in 11g R2 RAC to single node

Hi,
How can we setup 11gR2 Standby Setup : Primary Database 2 Node RAC to Standalone Standby Database

ashish wrote:
Hi,
Our requirement is to create single node standby of a 11g R2 RAC 2 node database.To implement there is not much changes in functionality of dataguard, Except some new features like
1) Active dataguard
-- Where you can run MRP even in open status, so that it can be only readable.
2) password file on standby should not be created, it should copy from primary and rename it.
3) from 11g you can perform duplicate from active database without backup.
& so on.
To build a stand alone standby from 2-node RAC, MAA pdf is better one
http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimaryracphysicalsta-131940.pdf
http://www.oracle.com/technetwork/database/features/availability/twp-dataguard-11gr2-1-131981.pdf
*How to create physical standby database with 11g RMAN DUPLICATE FROM ACTIVE DATABASE [ID 747250.1]*

Dataguard configuration from 2-node rac to single instance with out ASM

Hi Gurus,
Oracle Version : 11.2.0.1
Operating system:linux.
Here i am trying to configure data Guard from 2-node rac to a singled instance stanby database . I have done all the changes in the parameter file for both primary and stand by database and when i am trying to duplicate my target database it is giving error as shown below.
[oracle@rac1 dbs]$ rman target / auxiliary sys/qfundracdba@poorna
Recovery Manager: Release 11.2.0.1.0 - Production on Thu Jul 21 14:49:01 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: QFUNDRAC (DBID=3138886598)
connected to auxiliary database: QFUNDRAC (not mounted)
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 21-JUL-11
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
   backup as copy reuse
   targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/orapwqfundrac1' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1//dbs/orapwpoorna'   ;
executing Memory Script
Starting backup at 21-JUL-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=10 instance=qfundrac1 device type=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/21/2011 14:49:29
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 07/21/2011 14:49:29
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-01017: invalid username/password; logon denied
ORA-17629: Cannot connect to the remote database serverHere i was able to connect to my auxiliary database as shown below
[oracle@rac1 dbs]$ rman target /
Recovery Manager: Release 11.2.0.1.0 - Production on Thu Jul 21 15:00:10 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: QFUNDRAC (DBID=3138886598)
RMAN> connect auxiliary sys/qfundracdba@poorna
connected to auxiliary database: QFUNDRAC (not mounted)Can any one please help me .
Thanks & Regards
Poorna Prasad.S

Hi All,
Can any one please find out my both the parameters file and tell me if any thing is wrong.
Primary Database parameters.
qfundrac1.__db_cache_size=2818572288
qfundrac2.__db_cache_size=3372220416
qfundrac1.__java_pool_size=16777216
qfundrac2.__java_pool_size=16777216
qfundrac1.__large_pool_size=16777216
qfundrac2.__large_pool_size=16777216
qfundrac1.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
qfundrac2.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
qfundrac1.__pga_aggregate_target=4294967296
qfundrac2.__pga_aggregate_target=4294967296
qfundrac1.__sga_target=4294967296
qfundrac2.__sga_target=4294967296
qfundrac1.__shared_io_pool_size=0
qfundrac2.__shared_io_pool_size=0
qfundrac1.__shared_pool_size=1375731712
qfundrac2.__shared_pool_size=855638016
qfundrac1.__streams_pool_size=33554432
qfundrac2.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/qfundrac/adump'
*.audit_trail='db'
*.cluster_database=true
*.compatible='11.2.0.0.0'
*.control_files='+ASM_DATA2/qfundrac/controlfile/current.256.754410759'
*.db_block_size=8192
*.db_create_file_dest='+ASM_DATA1'
*.db_create_online_log_dest_1='+ASM_DATA2'
*.db_domain=''
*.DB_FILE_NAME_CONVERT='/u02/poorna/oradata/','+ASM_DATA1/','/u02/poorna/oradata','+ASM_DATA2/'
*.db_name='qfundrac'
*.db_recovery_file_dest_size=40770732032
*.DB_UNIQUE_NAME='qfundrac'
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=qfundracXDB)'
*.fal_client='QFUNDRAC'
*.FAL_SERVER='poorna'
qfundrac2.instance_number=2
qfundrac1.instance_number=1
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(qfundrac,poorna)'
*.LOG_ARCHIVE_DEST_1='LOCATION=+ASM_FRA VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=qfundrac'
*.LOG_ARCHIVE_DEST_2='SERVICE=boston ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=poorna'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.LOG_FILE_NAME_CONVERT='/u02/poorna/oradata/','+ASM_DATA1/','/u02/poorna/oradata','+ASM_DATA2/'
*.open_cursors=300
*.pga_aggregate_target=4294967296
*.processes=300
*.remote_listener='racdb-scan.qfund.net:1521'
*.REMOTE_LOGIN_PASSWORDFILE='EXCLUSIVE'
*.sec_case_sensitive_logon=FALSE
*.sessions=335
*.sga_target=4294967296
*.STANDBY_FILE_MANAGEMENT='AUTO'
qfundrac2.thread=2
qfundrac1.thread=1
qfundrac1.undo_tablespace='UNDOTBS1'
qfundrac2.undo_tablespace='UNDOTBS2'and my standby database prameter file.
poorna.__db_cache_size=314572800
poorna.__java_pool_size=4194304
poorna.__large_pool_size=4194304
poorna.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
poorna.__pga_aggregate_target=343932928
poorna.__sga_target=507510784
poorna.__shared_io_pool_size=0
poorna.__shared_pool_size=176160768
poorna.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/poorna/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/poorna/control01.ctl','/u01/app/oracle/flash_recovery_area/poorna/control02.ctl'
*.db_block_size=8192
*.db_domain=''
#*.db_name='poorna'
#*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=4039114752
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=poornaXDB)'
*.local_listener='LISTENER_POORNA'
*.memory_target=849346560
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sec_case_sensitive_logon=FALSE
*.undo_tablespace='UNDOTBS1'
############### STAND By PARAMETERS ########
DB_NAME=qfundrac
DB_UNIQUE_NAME=poorna
LOG_ARCHIVE_CONFIG='DG_CONFIG=(poorna,qfundrac)'
#CONTROL_FILES='/arch1/boston/control1.ctl', '/arch2/boston/control2.ctl'
DB_FILE_NAME_CONVERT='+ASM_DATA1/','/u02/poorna/oradata/','+ASM_DATA2/','/u02/poorna/oradata'
LOG_FILE_NAME_CONVERT= '+ASM_DATA1/','/u02/poorna/oradata/','+ASM_DATA2/','/u02/poorna/oradata'
LOG_ARCHIVE_FORMAT=log%t_%s_%r.arc
LOG_ARCHIVE_DEST_1= 'LOCATION=/u02/ARCHIVE/poorna VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=poorna'
LOG_ARCHIVE_DEST_2= 'SERVICE=qfundrac ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=qfundrac'
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=ENABLE
REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE
STANDBY_FILE_MANAGEMENT=AUTO
FAL_SERVER=qfundrac
FAL_CLIENT=poornaThanks & Regards,
Poorna Prasad.S

Upgradation of Primary (RAC) two node database and single node standby DB

We have our primary setup in Oracle RAC in 10g R2 (10.2.0.1.0) in HP UX 11i 64bit (PA RISC). It is a two node RAC.
And we have a single node standby database (DR).
Both the primary and standby database are existing in 10.2.0.1.0
We need to upgrade the primary and standby database from 10.2.0.1.0 to 10.2.0.4.0
Am planning to go through the DBUA method for upgrading the database.
I like to know is there any special cases for upgrading both the primary and standby database.
since as i mentioned i will upgrade the database through dbua method, and if i upgrade my standby database as same as primary,
will it forcefully open the database, because while we upgrade the database through dbua it will open the database at the end of installation.
Is it possible to upgrade the standby database with DBUA method even when my standby database is in Mount state.
I will be helpfull if anyone has done this earlier, are there any know issues and is there any good document which i can refer.
with regards
A.Aravind

hi,
thanks for your reply, and i was following the document.
I like to know that is it mandatory to create a new Oracle Home for upgrading from 10.2.0.1.0 to 10.2.0.4.0
or i can proceed the installation of software in the same oracle home.
I will list out my action plan, please correct me if am wrong,
In Primary RAC,
a) Shutdown the database
b) Shutdown the asm instance
c) Stop the nodeapps services
d) Stop the cluster ready services.
e) Stop the enterprise manager
f) Stop the isqlplus
In Standby single node database,
1)Cancel the managed Recovery process
2) shutdown the database
3) Shutdown the asm instance.
PATCHING Process
g) Apply the oracle clusterware patch 10.2.0.4.0 in the same old existing ORA_CRS_HOME
h) Apply the oracle database software patch 10.2.0.4.0 in the same old existing ORACLE_HOME
Note: In my case both the ORACLE_HOME and ASM_HOME are in the same location.
i) Execute dbua to update the database in the primary database.
j) Apply the 10.2.0.4.0 patch in standby database ORACLE_HOME where as ORACLE_HOME and ASM_HOME are in the same location
k) Copy the recently generated archive logs from primary to standby manually and apply in standby database.
l) Mount the database in standby
m) Start the Managed recovery process.
with regards
A.Aravind

CRS & RAC with 3 node

Hi EveryBody,
I am planing to install the Rac in my home, i mentioned the following information below.
i am using 3 system with windows 2000 server, i wan to install the oracle 10gR1 RAC.
my question is, for all nodes they need to install the CRS software ???? or one system is enough, and the same time what about the rac software, its enogh to install in one node or install in all node????
senthil

All nodes will will connected to each other with private IPs.......and you just need to install Clussterware and RAC from one node and add those nodes in your installtion. Oracle will install everything on its own on other nodes.
Hope this helps
Luck
Regards

Datagurad setup from 2 Node RAC to single instance (DR site)

Dear Expert,
I have request from management to setup the DR site from current production RAC database using active dataguard. I have two node rac database 11.2.0.3 running on sun solaris machine. I need proper step or good document can refer to setup between production RAC database to DR site single instance standby database. I only experience setup single instance to single instance .Apreciate expert can provide me some link
Regard
liang

Hello;
This will provide a good start and overview :
Creating a Single Instance Physical Standby for a RAC Primary : ( please note parameter changes for Oracle 11 )
http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimarysingleinstance-131970.pdf
As will this :
http://oracleinstance.blogspot.com/2012/01/create-single-instance-standby-database.html
Oracle 11
Rapid Oracle RAC Standby Deployment: Oracle Database 11g Release 2
http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-rac-standby-133152.pdf
Best Regards
mseberg

How to find thead 2 archive log when i recover from 2-node RAC to single

I backup 2-ndoe RAC and restore to single - node
Control file created.
SQL> recover database iuckup controlfile
SQL> recover database using backup controlfIle;
ORA-00279: change 12100176131169 generated at 07/06/2013 16:36:57 needed for
thread 1
ORA-00289: suggestion : /arch/hop1_566085708_1_212692.dat -- Oracle suggest
ORA-00280: change 12100176131169 for thread 1 is in sequence #212692
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
arch/sch1_566085708_1_212692.dat --- I input
ORA-00279: change 12100176131169 generated at needed for thread 2
==> Oracle didn't suggest thread 2 archive log file/
How can I find ?

You have to query V$ARCHIVED_LOG for THREAD# 2 on the source database to find the first archivelog where 12100176131169 is less than the NEXT_CHANGE#
select SEQEUNCE# from V$ARCHIVED_LOG where THREAD#=2 and 12100176131169 between FIRST_CHANGE# and NEXT_CHANGE#
Once you provide the Sequence# and file name for the first Thread 2 file, the RECOVER command will automatically generate the expected file name for the subsequent archivelogs (of both threads).
Hemant K Chitale

RAC to Single node cloing

Hi all,
We have our production running on 2 node RAC and its in ASM cluster and AppsTier on single node
Node 1 - AppsTier
Node 2 - RAC 1
Node 3 - RAC 2
Now I would like to do a cloning for the production from RAC to Single Instance
Is there any doc or steps to be followed for the RAC to single instance cloning ??..
Regards,
Mahesh

Hi Makesh;
This topic discussed here many times, Just check below links which u can find all notes and also see general search link
CLONE-RAc to nonrac
RAC -> NON RAC ebiz clone
Re: Clone Oracle Apps 11.5.10.2 RacDB to Non-RAC DB
General search:
http://forums.oracle.com/forums/search.jspa?threadID=&q=rac+to+nonrac+clone&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Regard
Helios

Dbms_schduler job is not running on a 2 node rac when 1st node fails

Hi,
I want to create a dbms_scheduler job in a 2 node RAC and the job should always run on the node1 and if node1 is down then it should run on node2. This is Oracle 10gR2 (10.2.0.3 in WINDOWS) .In order to do the same I did following
-- First Step
Using DBCA- Service Managment - Created a service (BATCH_SERVICE) and given node1 as preferred and node2 as available. This created following entry in tnsnames.ora in both nodes.
BATCH_SERVICE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = node1-vip)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = node2-vip)(PORT = 1521))
(LOAD_BALANCE = yes)
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = BATCH_SERVICE)
(FAILOVER_MODE =
(TYPE = SELECT)
(METHOD = BASIC)
(RETRIES = 180)
(DELAY = 5)
--- Step 2
-- Created BATCH job classes.
BEGIN
DBMS_SCHEDULER.create_job_class(
job_class_name => 'BATCH_JOB_CLASS',
service => 'BATCH_SERVICE');
END;
-- Step 3 -- created a job using job_class as BATCH_JOB_CLASS
begin
dbms_scheduler.create_job(
job_name => 'oltp_job_test'
,job_type => 'STORED_PROCEDURE'
,job_action => 'schema1.P1'
,start_date => systimestamp at time zone 'US/Central'
,repeat_interval => 'FREQ=DAILY;BYHOUR=11;BYMINUTE=30;'
,job_class => 'BATCH_JOB_CLASS'
,enabled => TRUE
,comments => 'New Job.');
end;
Now when I monitor this job it runs on node1. Now I started testing for failover. I manually shutdown 1st instance. Then as per my understanding job should run on 2nd node. But job is not picking up.
when I run the followign command
srvctl status service -d db -s BATCH_SERVICE
service BATCH_SERVICE is running on instance node2.
Any help is really appreciated.

It does not show that whether job is running or broken.

2 Node RAC with Single Node Standby Help

Similar Messages

Maybe you are looking for