32 bit coexist with 64 bity on same machine

Can Tuxedo 8.1 32-bit coexist with Tuxedo 8.1 64-bit, on same machine?

Absolutely.
Make sure that when you specify an installation directory, you use a name to explicitly define what you are installing For example, /opt/beahome/tuxedo81.32 and
/opt/beahome/tuxedo81.64. Developers can then set their TUXDIR to point at the right version, or you can build a link, /opt/beahome/tuxedo, to the version you want and then leave the TUXDIR alone.

Similar Messages

How to load both 32 bit and 64 bit version of addon on same machine

Hi,
When deploying an addon using SAP Business One Extension Manager, how can we install both 32 bit and 64 bit version of the addon for same machine?
If the OS is 64 bit, SAP allows to install and use both 32 bit SBO client and 64 bit SBO client. I want that when the 32 bit SBO client is used, my 32 bit addon should get loaded, and when 64 bit client is used, my 64 bit addon should get loaded.
But the SBO Extension Manager loads the addon for a given company; there seems to be no option to specify different addon files for 32 bit and 64 bit.
Is there a way?
Thanks.

Hi Rajesh,
There might be the problem while creating the add-on.
It is the system behavior that once you login to 32 bit SAP Client, you can use only 32 bit Add-on. Means 32 bit add-on will be loaded automatically.
Same is in the case of 64 Bit.
What you have to do is:
If OS is 64 Bit and you have installed both 32 and 64 Bit SAP Client then once open 32 bit client and install only 32 bit add-on
Then open 64 Bit SAP Client and install only 64 bit add-on.
By doing this you will be able to use 32 bit add-on on 32 bit SAP Client and vice versa.
Hope it helps.
Thanks & Regards
Ankit Chauhan

Postinstall for 9iAS with 8i on same machine

hello,
I have just completed install of 9iAS 1.0.2.0.1
with the origin 8i 8.1.7 db on the same Solaris 8 machine.
I am currently trying to do post-install and I'm having
some trouble resolving conflicts in env variables.
Ex: 9iAS post-install says to set ORACLE_HOME to home
directory where 9iAS was installed; but ORACLE_HOME
has previously been set to the 8i home.
How do I resolve this in order to appropriately set the
env variables for 9iAS?
Thanks,
Lauren.

What you can do is run different shell scripts to set the ENV as
required.
Since 817 and iAS are in different homes that should not be a
problem

Recording your live mainstage performances with logic on same machine

Is this possible? What's the best way to route out of Mainstage into logic for the cleanest recording?
thank you friends
that1guy

I do it all the time, on a circa 2008 mbp, seems to work just fine.
you'll want this:
http://cycling74.com/products/soundflower/
the way I do it is that I go into audio midi setup and I create an aggregate device joining my audio interface and the virtual interfaces of soundflower.
Then in mainstage, I'll create two busses: one with an output to my audio interface, and one with an output to soundflower, and I'll send my channel strips to both busses.
Then in logic, I'll load up the same aggregate device. Then I can record multi-tracks from my audio interface, and I can also have a separate track that gets the outputs from soundflower ... so I basically get mainstage on one track and the rest of the band on their tracks. Be sure to mute the main outs in Logic.
works like a charm. runs the cpu pretty hard. you'll want your power adapter for sure.

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM

How to migrate Oracle 9i(32 bit) to oracle 10g(64 bit) DB with ASM on SAME platform RHEL4.0
Scenario My case:
1) DB size 400G.
2) Minimum downtime.
3) oracle 9i(9.2.0.4) source DB.
4) oracle 10g(10.2.0.3) target DB with ASM.
5) Source DB (HOST A) and target DB (HOST B) Machine.
Thanks
Ashutosh

I think Werner is suggesting you ask your question in the appropriate forum.
Go up 2 levels (to Community Discussion Forum) and look for the Database category. It's not that difficult to find, and you will be discussing the question with people who actually care about that kind of question.
The people who read and interact in this forum do so to discuss Documentation questions. Specifically questions about how to improve the documentaiton.

Can I run 64 bit LabVIEW and 32 bit LabVIEW on the same machine?

If I have a 64 bit OS (Windows 7 64 bit or Server 2008 64 bit) can I install and run 32 and 64 bit LabVIEW on the same machine?
John

LabVIEW 64-Bit vs. 32-Bit Applications FAQ
Q. Can I have both LabVIEW 32-bit and LabVIEW 64-bit installed on the same 64-bit machine?
A. Yes.
The FAQ will likely answer other questions you have regarding the restrictions and issues you will have with having both versions and compiling in one vs the other.

Installation steps for 64 and 32 bit on same machine

I'm running Windows Server 2008 R2 64 bit. All my webapps are using 32 bit mode.
I want to install both Oracle 10G 64 and 32 bit on the same machine. Which version should i install first?
64 bit or 32 bit first?
Thanks..

Why do you want to install both Oracle 32-bit and 64-bit? Oracle 32-bit client can communicate with a 64-bit database and vice versa.
Also installing both the 32-bit and 64-bit may result in legal problems when your site is audited by Oracle.
Sybrand Bakker
Senior Oracle DBA

Sharing iMove Projects Libraries with different users on the same machine

I was wonder how two different users on the same machine can
share project libraries. Some Context:
My daughter has some finished projects in her project library and
I either want to import those project into my library or share them
so both user accounts can access the projects (similar to how the
event library is accessible)
Note: I've already moving the project library to a shared disk (the one
the event library is on) with no luck
Using iMove 09
tia...

You need to move each project to the external drive from within iMovie. Be sure to use command-drag so you move, not copy.

Can Xcelsius 2008 Engage coexist on the same machine as SAP Crystal Dashboard Design?

I still have the requirement to maintain dashboards created with Xcelsius 2008 SP5. Will the install of SAP Crystal Dashboard Design: Departmental overwrite or disable the ability to run Xcelsius 2008 on the same machine?

Thank you for the reply. I am not sure I phrased the question very well, as I said in the post I am aware Personal Edition does not require viewing licenses. What I was asking was whether the 'internal business use only' clause in the EULA prevented dashboards built with Personal Edition from being placed on external company sites?
If anyone could provide an answer to this it would be greatly appreciated.
Thank you.

Replace a 2003 (not R2) File Server with a 2012R2 files server and preferably keep the same machine name and IP when finished

I am wanting to replace a 2003 (not R2) File Server with a 2012R2 file server and preferably keep the same machine name and IP when finished. For the moment I just need some "high level" guidance, little details can be worked out once I know
which direction I will go. I was considering that DFS might be a way to help get through the process although when finished the 2012R2 Files server will be by itself with no other file server planned at this time. DFS can stay installed for maybe
future purposes but clearly I wouldn't need the DFS Replication with only one machine.
Here's a few details of the environment....
1. DC's are 2012R2 but it is still 2003 DFL because the old 2003 DCs are still present. But likely they will be gone and the DFL elevated before I start on the File Server project
2. Nearly all machines in the facility have a shortcut on the "All Users" Desktop that points to the existing old File Server. Editing or replacing that shortcut would be a major pain,...hence why I want to keep the same machine name at least,
and maybe the same IP if not too much trouble. This way the existing shortcut would continue to work with the new 2012R2 File Server. The UNC path represented in that shortcut is also configured into one or more of our major business applications,
futher emphasizing the need to keep the UNC path the same throughout the process.
3. The facility runs 24/7/365 but is "light" on weekends. The political environment is such that there is little to no tolerance for any down time at all.
4. Would DFS (based from the 2012R2 machine) be a good tool to get where I need to go?
Thanks for any suggestions.
Phillip Windell

Hi Sharon,
I've done some more reading and have a few new ideas to run past you....
Yes regular DFS wouldn't help and the Namespace would still be different than how it was with just the old server. However I was thinking DFS Replication could replace the purpose of RoboCopy and it would keep the two locations "in sync" until I was ready
to flip over to the new server. DFS Rep can exist independently of a DFS Namespace, so a Namespace is not even needed. It needs a minimum of 2003R2 for the "later & better" DFS Rep but I believe 2003 can do an "in place" upgrade to 2003R2, so I would upgrade
the old server to 2003R2 first. As long as the DFS Rep on 2012R2 and 2003R2 will properly interact I think that will work.
Thanks for the reg info on the Shares. I'm debating if editing that would reg file would really be much better than manually creating the Shares on the new server while the DFS Replication was doing its job. I'll probably export that Key as a
safety move whether I use it or not.
Once the DFS Rep is fully in sync and the Shares are in place on the new server, I figure I would then:
1. Remove the DFS Replication Object (optionally remove DFS Services completely)
2. Rename the old File Server to something else and set it to DHCP
3. Rename the new File Server to the name I want to use and give it the IP the old server had.
How does that sound?
Phillip Windell

Problem with JMX Remote Port - JBoss & Apache on same machine

Hi,
I have a server which hosts Apache that uses mod_jk to pass requests to three Tomcat instances. Apache listens to port 80.
I want to install a different application on the same machine that runs on JBoss. Foreseeing the problem with port numbers, I got a different IP address (Let's say IP2, and original IP for Apache is IP1) on the same machine to run JBoss application. I changed HTTP Connector configuration in server.xml to add "address=IP1:8080" for Tomcat, "address=IP2:8080" for JBoss. I also modified Apache Listen directive in httpd.conf from "Listen 80" to "Listen IP1:80".
Now when I try to start JBoss server by running run.bat, I get below error.
Can any one please suggest how can I resolve this port conflict? Is there even a way to resolve it? As JAVA_HOME can point to a single location and both JBoss & Apache use it?
Thanks.
===============================================================================
JBoss Bootstrap Environment
JBOSS_HOME: C:\jboss
JAVA: C:\Java\jdk1.6.0_01\bin\java
JAVA_OPTS: -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.port=
9004 -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.aut
henticate=false -Dprogram.name=run.bat -server -Xms128m -Xmx512m -Dsun.rmi.dgc.
client.gcInterval=3600000 -Dsun.rmi.dgc.server.gcInterval=3600000
CLASSPATH: C:\Java\jdk1.6.0_01\lib\tools.jar;E:\jboss\bin\run.jar
===============================================================================
Error: Exception thrown by the agent : java.rmi.server.ExportException: Port alr
eady in use: 9004; nested exception is:
java.net.BindException: Address already in use: JVM_Bind
Press any key to continue . . .

What's running on JMX port without the Jboss running ?
Seems that u have something it.
Btw, try to discover how to bind JMX of portal to IP2, not to IP1 or to global Ip.

VS Program to work with SharePoint that is not on the same machine

Hello! I am fairl new to programming in Visual Studio and even newer trying to work with SharePoint. I've just learned that VS and SharePoint must be installed on the same machine, but then a virtual development machine can be set up. If that is the case
I may run into a problem. I am developing programs where I wanted my answers to be written to SharePoint lists. My programs will be spread out across my organization that will not have SharePoint installed on their computer, they will simply be able to access
it through internet explorer. Will my programs be able to write to SharePoint lists in this case? Also, if there is any easier way to develop with this capability I am happy to learn.

I have also attempted to copy some code from a training video out found which is below:
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim lists As New BofaListWebReference.Lists()
lists.Credentials = System.Net.CredentialCache.DefaultCredentials
Dim listName As String = "TestElevated"
Dim viewName As String = "All Items"
Dim query As System.Xml.XmlNode
Dim viewFields As System.Xml.XmlNode
Dim rowLimit As String = "100"
Dim queryOptions As System.Xml.XmlNode
Dim responseNode As System.Xml.XmlNode
Dim itemNode As System.Xml.XmlNode
responseNode = lists.GetListItems(listName, viewName, query, viewFields, vbNull, queryOptions, vbNull)
For Each itemNode In responseNode
Label1.Text = Label1.Text + itemNode.InnerXml
Next
End Sub
However, everytime I run it I get the following error message:
Exception of type 'Microsoft.SharePoint.SoapServer.SoapServerException' was thrown.
I should also note that in the responseNode line, query, viewFields, and queryOptions have green lines underneath and the code I found this from did not include an entry for the final parameter so I just included vbNull as I seen that from a training video.

Oc4j starting with Oracle Database & oc4j App Server on same machine

Hi ALL, can anybody help me(pls read this)
This is Sagar, i have created a GIS Application(java) using Oracle 10g.
Senario I:
oc4j server and oracle 10g Database Server on different machines:
When i start oc4j server with NO. OF Mappers = 64 or 30 in DNS using
1. oc4j -start (normally)
from the path c:/oc4j/bin by setting ORACLE_HOME path normally
application is working fine but when users are increased say 4 to 5 oc4j server gives error:
java.lang.OutOfMemoryError: Java Heap Space
I searched for this error i found a solution for starting oc4j as follows:
2.Java -Xmx1024m -Xms1024m -jar oc4j.jar
from the path c:/oc4j/j2ee/home --- oc4j.jar
Then map & application works fine and fast since heap space is increased to 1GB (speed is noticable)
but if...(in other senario)
Senario II:
oc4j server and oracle 10g Database Server on same machine:
if step 2: is used form above senario, oc4j Server does not gets started only it gets initialized...(server does not gets started)
but Step 1: is used application works fine but again heap space error as mentioned above is seen.
Again if changes are made in oc4j.cmd file in c:/oc4j/bin ....by giving the heap space command oc4j works fine but the application(performance) is very very slow but heap space error is not seen.
Please can any body suggest the solution.. application should work fast and also the heap space should be increased but taking the senario - oc4j App Server & Oracle 10g Database Server on Same machine..

Hello,
How much RAM do you have on the machine? What is the size of the SGA for the database you are using?
if step 2: is used form above senario, oc4j Server does not gets started only it gets >initialized...(server does not gets started)What do you mean by this? Provide the output from the server when you start your server.

Install Oracle Application Server on the same machine with Oracle Database

Hello!
I have already have installed on my laptop the oracle Database 10g, and i want to install on the same machine Oracle Application Server; can I do that? After i look on some threads on this forum I understand that all I have to do is to change the default port 1521 of the database to antoher ..let's say 1523...how can I change the port? what files do i have to modify? Oracle Application server can work in good conditions with Oracle XE or I will have the same problem?
My SO is Windows XP Professional SP II, all updates, 512RAM, 2Ghz-CPU
Thanks!

Well, you'll have some problems to run simultaneously Database and AS with 512 Mb...
Apart from that, you don't need to start two listeners, you can use just one (the highest version) for both DBs.
If, for any reason, you want to use two, you can change the port within LISTENER.ORA file, normally in ORACLE_HOME\network\admin.

When I try to install some plugins I get "Can't find Internet Plug-ins folder". Friends with the same machine using the same browser can download just fine. What gives?

When I try to install a plugin in any browser on my Mac Mini or my MacBook Pro, I get a "Can't find Internet Plug-Ins folder" message. Other friends with the same machines can install the plugin just fine. We can't find any reason why the plugin won't install on mine. Any ideas out there?
Thanks,

Triple-click anywhere in the line below on this page to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted line and select
Services ▹ Show Info
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can only read" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

32 bit coexist with 64 bity on same machine

Similar Messages

Maybe you are looking for