3640 RAS: modems take 60seconds to accept another call

I have a 3640 running 12.2(29) acting as a back-up RAS box, with an 8-port internal modem card. When a user disconnects from a modem, it takes exactly 60 seconds before that modem will accept another incoming call. I believe my modemcap is wrong. Can someone please advise what I need to change?
modem country microcom_hdms usa
modemcap entry bwmodemcap:MSC=AT&F&C1&D2S0=1H0
interface Group-Async1
ip unnumbered Ethernet0/0
encapsulation ppp
ip tcp header-compression
async mode interactive
peer default ip address pool dialup
ppp authentication pap
group-range 97 104
line 97 104
modem Dialin
modem autoconfigure type bwmodemcap
transport input all
autoselect during-login
autoselect ppp
stopbits 1
flowcontrol hardware
Here is the debug output when a user hangs-up:
6d23h: Modem 3/4 Mcom: in modem state 'Disconnecting'
6d23h: Modem 3/4 Mcom: DISCONNECT, duration = 00:03:12, reason (0xE) Remote Link Disc
6d23h: TTY101: DSR was dropped
6d23h: tty101: Modem: READY->HANGUP
6d23h: TTY101: dropping DTR, hanging up
6d23h: TTY101: Async Int reset: Dropping DTR
6d23h: tty101: Modem: HANGUP->IDLE
6d23h: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async101, changed state to down
6d23h: TTY101: cleanup pending. Delaying DTR
6d23h: TTY101: cleanup pending. Delaying DTR
6d23h: Modem 3/4 Mcom: in modem state 'Idle'
6d23h: %LINK-5-CHANGED: Interface Async101, changed state to reset
6d23h: TTY101: cleanup pending. Delaying DTR
6d23h: TTY101: cleanup pending. Delaying DTR
6d23h: TTY101: cleanup pending. Delaying DTR
6d23h: TTY101: cleanup pending. Delaying DTR
6d23h: TTY101: cleanup pending. Delaying DTR
6d23h: TTY101: cleanup pending. Delaying DTR
6d23h: Modem 3/4 Mcom: switching to character mode
6d23h: TTY101: no timer type 0 to destroy
6d23h: TTY101: no timer type 1 to destroy
6d23h: TTY101: no timer type 3 to destroy
6d23h: TTY101: no timer type 4 to destroy
6d23h: TTY101: destroy timer type 10
6d23h: TTY101: no timer type 2 to destroy
6d23h: Async101: allowing modem_process to continue hangup
6d23h: TTY101: restoring DTR
6d23h: TTY101: autoconfigure probe started
6d23h: TTY101: Modem command: --ATAT&F&C1&D2S0=1H0--
6d23h: %LINK-3-UPDOWN: Interface Async101, changed state to down
6d23h: Modem 3/4 Mcom: in modem state 'Dialing/Answering'
6d23h: Modem 3/4 Mcom: in modem state 'Waiting for Carrier'
6d23h: TTY101: Modem configuration succeeded
6d23h: TTY101: Detected modem speed 9600
6d23h: TTY101: Done with modem configuration
6d23h: Modem 3/4 Mcom: in modem state 'Disconnecting'
6d23h: Modem 3/4 Mcom: DISCONNECT, duration = 00:00:00, reason (0x2) No carrier
6d23h: Modem 3/4 Mcom: in modem state 'Idle'

Hello,
try to change the D2 to D3 in your modemcap entry:
modemcap entry bwmodemcap:MSC=AT&F&C1&D3S0=1H0
AT Command Set and Register Summary for Cisco
http://www.cisco.com/en/US/partner/products/hw/univgate/ps501/prod_command_reference09186a00800a97c9.html#3841
Regards,
GP

Similar Messages

  • 3640 RAS aaa accounting on IAS Server

    Hi gentlemen,
    I have configured aaa accounting on Cisco 3640 RAS and I need collect the aaa remote user time connections (start and end time connections) for time management cost.
    Accounting information received on IAS seems to be only from start remote connection and never to stop connection.
    I don't know if the problem is on 3640 configuration or on IAS configuration, but I would undertood if my configuration is correct.
    I send RAS config file to you.
    Many Thank in advance,
    Luca

    Luca
    I have looked at the config that you posted and I believe that I see an issue. You have configured accounting for DIALER with this method list:
    aaa accounting network DIALER start-stop group radius
    I would expect to see the method list DIALER accounting referenced under interfaces Serial1/0:15, interface Virtual-Template1, and interface Group-Async10. I suggest that you add:
    ppp accounting DIALER
    under these interfaces and let us know if it helps.
    HTH
    Rick

  • Is there a way that my iphon can accept another network?

    Hello I want to know if there is a way that my iphone can accept another network?

    Sure, use an existing unlocked iPhone or have it unlocked by your existing cellular provider.

  • Take the DJ to another lev

    maybe in the new firmware for the zen micro it would be nice to have some kind of mixing option between tracks... like many of you winamp users may already have experienced...
    it would be an option where you can choose your fading time (going from 0sec. to 5sec. for example) and during this time the track that is playing gently fades out while the new track is fading in...
    you can take it even further when you let the player itself adjust the time it fades by analysing the waveform of a track... I think in the newest winamp there is such a tool and it makes very smooth jumps from one track to another...
    offcourse such an option would also resolve the "gap" between tracks.
    If creative couls add something like this in the DJ menu, the zen players will have a serious advantage comparing to other players!
    so my question for creative is wheter this is possible on a new firmware edition...
    It certainly would take my zen to another level!

    The Rio Karma does it up to 5 seconds, although I don't really see this as a DJ feature as such.
    There's certainly a lot more that could be done with the DJ in terms of playlist creation, just take a look at the Karma DJ.

  • Is it possible to buy an iphone 5 in the states and take it back to another country for use?

    Is it possible to buy an iphone 5 in the states and take it back to another country for use?

    Apple has not yet announced the availability of unlocked iPhones in
    the US, but they are for sale in Canada, parts of Europe, and elsewhere.
    Warranty is not international. Service and repair/replacement only in
    country of original purchase. LTE/4G may or may not work in other
    country depending on bands and frequencies used.

  • When I'm in a call, I can hear beeping like I'm getting another call but the name doesn't show up and the only way I can see who called is if they leave a voicemail

    I have an employee who has an issue when on calls. When he is in a call with someone, he can hear another call beeping in but no name shows up. The only way he can see who called is if they leave a voicemail. He says the phone is up to date with software. Wondering if anyone can help me figure out what is going on.

    Morning katesnazzy,
    Thanks for using Apple Support Communities.
    There are different methods for enabling and using the following features, depending on your wireless carrier's network technology
    For more information on this, take a look at this article:
    iPhone: Understanding phone features
    http://support.apple.com/kb/HT4515
    Best of luck,
    Mario

  • When i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this potion. Please give me some solution.

    when i call someone who already connected with another call it doesn't show any wating notification. why? it is very important. all other mobiles have this option. Please give me some solution.

    Your iPhone can take multiple calls. If you answer your phone from one person or call someone and another call comes into you, you will hear a beep and if you pull your phone away from your ear, you will see that you can hang up the call with the 1st person or answer the 2nd call and then swap between the two.
    I have no idea what you mean by you calling someone who is already talking to someone. I've never been able to see on my iPhone that someone I'm calling is already talking to someone else.

  • Why does facetime hang up when I get another call on call waiting?!?!?

    I love facetime, buy my one complaint is, when I get another call if I am in the middle of a facetime chat, it hangs up the facetime call completely. Just to ask if I want to accept or decline the new call. That's one bug that needs to be addressed.

    no, if another call comes in, it will completely hang up the facetime call, and bring you to the incoming call screen and you can accept or decline. Even if you decline it does not resume the old call. You have to call the person back.

  • Can I use touchID for accepting a call?

    In security mode I can only swipe to accept call , sadly can it be a good idea to use TouchID for it?

    Edeke wrote:
    When the iPhone is locked to open you use the 4 digit code or your fingerprint identification to open you're iPhone, this is for security so I call it security/safety mode.
    I know the home button when the iPhone is locked is pretty much useless.
    Therefore my question; can it be a good idea to accept a phone call using TouchID? Maybe with a toggle on/off inside settings.
    Everybody has access to an unattended mobile phone to accept a call even when locked not to your email/messages conversations.
    Not logic in my view.
    TouchID is enough to prevent unattended calls from your trousers or bag, before TouchID we had the push, swipe and a 4 digit code to prevent it.
    So, you want to make it so that only your fingerprint can be used to answer an incoming call to your iPhone, when it is locked?
    If that's correct, let me explain why I think it's a bad idea and it will never be implemented.
    Hypothetical situation:  You accidentally leave your phone at the mall.  An honest person finds it, then turns it in to the security office.
    You try to call your lost iPhone from another phone, hoping someone will answer it and tell you where your phone is.  But even though the security officer has the phone, he cannot answer the incoming call, because you've locked it to just your finger print.
    That's just one of a dozen situations where this feature is a bad idea.  But feel free to submit your input to Apple at www.apple.com/feedfback.

  • On phone and get another call

    When I was talking to my Sister I got another call and I pressed answer and hold call but when I tried to go back to her call she was gone. How do I answer a call and put the one I am on hold? I know I am doing something wrong
    I am not always on here <personal information deleted per the Verizon Wireless Community Terms of Service>
    Message was edited by: Verizon Moderator

    Same thing here---2 days into IPhone and problems:
    1.  When I am on Skype and a call comes in--just the fact that someone is calling me cuts off my Skype call!
    2.  People can't hear me sometimes--and volume is on max.
    3. When I plug in my earpiece my speaker doesn't work--so using it with driving is not happening!
    4.  when I went to the store they want a $35 RESTOCKING FEE---hey  I SPECIFICALLY asked about SKYPE!!!
    5.  When you take a picture you can upload to "Tweet", Email--attach to contact  use a s wallpaper and print--BUT YOU CAN'T UPLOAD TO THE LARGEST NETWORKING SYSTEM IN THE WORLD------NO FACEBOOK!!   You have to leave the camera app--open Facebook click on photos, click on libraries  get you picture and then scroll through all of them to find the picture you want-----***!!!!!!!!
    6.  Phone contacts are alphabetized--but when you create a "favorite contact" list---I have about 32 in my favorites---about 250 phone numbers stored--you can't alphabetize your favorites--so you have to look at EACH one to get to who you want---better to leave them in regular contacts---also the alphabet at the side is so tiny when you on it it will take you directly to calling a person instead of the names in that letters vicinity for you to pick from.

  • Offload Xth Call to another Call Center - UCCX

    I have a customer that wants the Xth call to be off loaded to another call center.  I believe this is possible with UCCE but has anyone done this with UCCX?

    Hi, I see, I was not sure about this interpretation, I mean, it was my misinterpretation, sorry.
    Actually, there's a question: what happens if there are two calls arriving at the same time, which one would be the victim? This is sort of a problem, calls are not arriving sequentially and they are not blocking each other, they may arrive parallelly.
    Anyway, it would be easier to do this with UCCE, since there are Global variables and we could just easily reserve one Global as a counter, incrementing and resetting each and every time. With UCCX, there are, perhaps, sessions and they may hold this counter, but sessions expire, thus making our lives a bit complicated.
    What you could try is to introduce a few steps like this in the script that would distribute the calls:
    1. take a look if there's a session identified by a certain ID exists, if not, create it and set its value to 1,
    2. if it exists, then just increment its value, and save it back to the session, if it's above a threshold, then reset the counter, redirect the call to call center B.
    Yet another way would be to save this information in a database table, perhaps, but this may sound like an overkill.
    G.

  • When a servlet accepts a call from a client, it receives two objects.what??

    hi,
    When a servlet accepts a call from a client, it receives two objects. What are they???

    How will u pass the argument from one servlet to another servlet??Actually, it's dead simple: Just tell servlet #1 that servlet #2 said something nasty about servlet #1's mother and sister, so servlet #1 will head-butt servlet #2 and you have the argument passed along ...

  • How can you auto-accept Video Calls in Messages.app

    In Ichat there used to be a way to select a user and under "alerts" (which is no longer a perference option in messages) choose to auto-accept video calls from that person.
    Is there a way to set up Messages to auto acccept video calls? It was great for when I wanted to check in on my puppy.
    Thanks!

    HI,
    In the normal setting of Messages this is no longer possible.
    I would use here to ask for the feature back
    http://www.apple.com/feedback/ichat.html
    The page was never very good at keeping up to date with iChat version numbers so type your specs into the Free Text area.
    It might be possible to copy the AppleScript that did this  and make a copy and remove the non Video bits  and use it from the Dock.
    10:06 pm      Tuesday; November 26, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • After installing 6.0.1 on my iPhone 4 I no longer get notification when another call comes in when I'm on another call. In phone settings I no longer have the icons for call waiting and call forwarding. My carrier is sprint

    I no longer get notifications that another call is coming in when I'm on the phone. In the settings under phone I do not see any availabilty for call waiting or call forwarding. I had this feature before installing the new update 6.0.1.

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • TS3406 How can I get the phone number of who is calling me when I am talking on another call?

    I have looked everywhere trying to figure out how to look at my phone and see who is calling when I am on another call.  All my other phones have done this automatically and this Iphone 5 is not doing it.  I am afraid I have somthing turned off that shouldn't be.  ANY HELP O

    It will say "mobile" Home", etc under the name.
    You can also tap the blue arrow and see the highlighted number.
    iPhone User Guide (For iOS 5.0 Software)

Maybe you are looking for