4 series in a chart setup
I have 4 series in a chart and I want to have 3 using the left axis and 1 using the right, how can I set this up?
thanks
Select the chart then the series to delete by clicking on the series' header. It should look like this:
Then use the delete key. You're right, the "Edit"/"Delete" is not enable. This is probably a bug.
Message was edited by: 5|=vv... clicking on the series in the chart, while it selects the series does not then allow deletion (probably another bug).
Similar Messages
-
Function returning SQL query for mutiple series in a chart
Hi,
I would like to know if there is a way to specify a single PL/SQL function returning the queries for multiple series in a 2D Line Flash Chart. I have multiple series in my chart that has different values in the where clause. I can write a PL/SQL function that can return all these queries in one shot. Is there anyway that I can specify this function as returning the queries for all the series in the chart?
As an example, assume that I am using the following three queries for the series in my chart:
select deptno, count(*) from emp where deptno = 10 group by deptno
select deptno, count(*) from emp where deptno = 20 group by deptno
select deptno, count(*) from emp where deptno = 30 group by deptno
I can't write a PL/SQL function that returns a query in the multiple series syntax (SELECT link, label, series_1_value [, series_2_value [, ...]]FROM ...) as I am using an aggregate function and my where clause is different for each series.
Thanks,
RupeshHi Roel,
Thanks for your reply. I am already using an analytical function (RATIO_TO_REPORT(COUNT(*)) OVER () ) in my actual report. My problem is that the query for one series differs from the other only in one where clause. I will be able to dynamically able to generate all the queries for all the series in one pl/sql function. But the chart definition screen does not allow us to define a single function that returns queries for the all the series - possibly seperated by some seperator like S1: select.... S2:select and so on.
Regards,
Rupesh -
Scatter plot using time series function - Flash charting
Apex 3 + XE + XP
I am trying to build a time series scatter plot chart using flash chart component.
Situation :
On each scout date counts are taken within each crop. I want to order them by scout dates and display them in a time series chart. Each series represents different crop.
I am posting the two series queries I used
Queries:
Series 1
select null LINK, "SCOUTDATES"."SCOUTDATE" LABEL, INSECTDISEASESCOUT.AVERAGECOUNT as "AVERAGE COUNT" from "COUNTY" "COUNTY",
"FIELD" "FIELD",
"VARIETYLIST" "VARIETYLIST",
"INSECTDISEASESCOUT" "INSECTDISEASESCOUT",
"SCOUTDATES" "SCOUTDATES",
"CROP" "CROP"
where "SCOUTDATES"."CROPID"="CROP"."CROPID"
and "SCOUTDATES"."SCOUTID"="INSECTDISEASESCOUT"."SCOUTID"
and "CROP"."VARIETYID"="VARIETYLIST"."VARIETYLISTID"
and "CROP"."FIELDID"="FIELD"."FIELDID"
and "FIELD"."COUNTYID"="COUNTY"."COUNTYID"
and "INSECTDISEASESCOUT"."PESTNAME" ='APHIDS'
and "VARIETYLIST"."VARIETYNAME" ='SUGARSNAX'
and "COUNTY"."COUNTNAME" ='Kings' AND CROP.CROPID=1
order by SCOUTDATES.SCOUTDATE' ASC
Series 2:
select null LINK, "SCOUTDATES"."SCOUTDATE" LABEL, INSECTDISEASESCOUT.AVERAGECOUNT as "AVERAGE COUNT" from "COUNTY" "COUNTY",
"FIELD" "FIELD",
"VARIETYLIST" "VARIETYLIST",
"INSECTDISEASESCOUT" "INSECTDISEASESCOUT",
"SCOUTDATES" "SCOUTDATES",
"CROP" "CROP"
where "SCOUTDATES"."CROPID"="CROP"."CROPID"
and "SCOUTDATES"."SCOUTID"="INSECTDISEASESCOUT"."SCOUTID"
and "CROP"."VARIETYID"="VARIETYLIST"."VARIETYLISTID"
and "CROP"."FIELDID"="FIELD"."FIELDID"
and "FIELD"."COUNTYID"="COUNTY"."COUNTYID"
and "INSECTDISEASESCOUT"."PESTNAME" ='APHIDS'
and "VARIETYLIST"."VARIETYNAME" ='SUGARSNAX'
and "COUNTY"."COUNTNAME" ='Kings' AND CROP.CROPID=4
order by SCOUTDATES.SCOUTDATE' ASC
Problem
As you can see the observations are ordered by scout date. However when the chart appears, the dates dont appear in order. The chart displays the data from crop 1 and then followed by crop 4 data, which is not exactly a time series chart. Does flash chart support time series or they have no clue that the data type is date and it should be progressive in charting ? I tried to use to_char(date,'j') to converting them and apply the same principle however it did not help either.
Any suggestions ?
Message was edited by:
tarumugam
Message was edited by:
aruArumugam,
All labels are treated as strings, so APEX will not compare them as dates.
There are two workarounds to get all your data in the right order:
1) Combine the SQL statements into single-query multi-series format, something like this:
select null LINK,
"SCOUTDATES"."SCOUTDATE" LABEL,
decode(CROP.CROPID,1,INSECTDISEASESCOUT.AVERAGECOUNT) as "Crop 1",
decode(CROP.CROPID,4,INSECTDISEASESCOUT.AVERAGECOUNT) as "Crop 4"
from "COUNTY" "COUNTY",
"FIELD" "FIELD",
"VARIETYLIST" "VARIETYLIST",
"INSECTDISEASESCOUT" "INSECTDISEASESCOUT",
"SCOUTDATES" "SCOUTDATES",
"CROP" "CROP"
where "SCOUTDATES"."CROPID"="CROP"."CROPID"
and "SCOUTDATES"."SCOUTID"="INSECTDISEASESCOUT"."SCOUTID"
and "CROP"."VARIETYID"="VARIETYLIST"."VARIETYLISTID"
and "CROP"."FIELDID"="FIELD"."FIELDID"
and "FIELD"."COUNTYID"="COUNTY"."COUNTYID"
and "INSECTDISEASESCOUT"."PESTNAME" ='APHIDS'
and "VARIETYLIST"."VARIETYNAME" ='SUGARSNAX'
and "COUNTY"."COUNTNAME" ='Kings'
AND CROP.CROPID in (1,4)
order by SCOUTDATES.SCOUTDATE ASC2) Union the full domain of labels into your first query. Then the sorting will be applied to the full list, and the values of the second series will be associated with the matching labels from the first.
- Marco -
Programitically creating column series to flex chart not showing the chart
I want to create n number of series dynamically when i run my
application.
where n can be any value it depends on the data which i
retrieve from database. below i pasted the example
( in this example i have taken n = 4 i.e., CountMax=4 if i
change the CountMax=6 then it should generate 6series dynamically
after calculating the values. ). just copy the below code and paste
it in Flex builder and run the application.
in this example i am facing problem, chart series are not
showing. i dont know the reason why its not showing, if anyone got
the solutions for the problem please let me know. my actual
requirement is to retrieve data from Salesforce account and want to
populate the arraylist then display the chart.
<?xml version="1.0"?>
<!-- Example showing using mx:LineSeries vs using AS to
create chart series programmatically -->
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="drawChart()" layout="absolute">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.charts.series.ColumnSeries;
import mx.charts.series.LineSeries;
import mx.collections.ArrayCollection;
[Bindable]
public var categoryArray:ArrayCollection = new
ArrayCollection();
[Bindable]
public var sArray:ArrayCollection = new ArrayCollection();
public function drawChart():void
var histMax:int = 25;
var histMin:int = 5;
var countMax:int = 6;
var tmpArr:Array = new Array();
categoryArray.removeAll();
for(var n:int = 0; n < 10; n++)
tmpArr[n] = histMin + Math.round((2 * n) / 20 * (histMax -
histMin));
categoryArray.addItem({data:tmpArr[n]});
// Add a series to the chart with the x-values and y-values
// from the arrays and set the series type to a column chart
for(var chartSeries:int = 0; chartSeries < countMax;
chartSeries++)
var tmpseries:Array = new Array(10);
for(var i:int = 1; i < 10; i++)
tmpseries = 3 * Math.random();
var cs:ColumnSeries = new ColumnSeries();
columnchart1.series.join( = [cs];
sArray.addItem({data:tmpseries});
//columnchart1.dataProvider = sArray;
cs = new ColumnSeries();
cs.dataProvider= sArray;
cs.displayName = 'Series';
cs.yField = 'data';
columnchart1.series[chartSeries] = cs;
]]>
</mx:Script>
<mx:Panel title="Dynamic Series Adding Sample"
width="195%" height="90%" layout="absolute">
<mx:ColumnChart id="columnchart1" height="338"
width="396" showDataTips="true" type="stacked" x="10" y="0">
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="{categoryArray}"
categoryField="data"/>
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:LinearAxis baseAtZero="true" maximum="3"
autoAdjust="true"/>
</mx:verticalAxis>
</mx:ColumnChart>
</mx:Panel>
</mx:Application><?xml version="1.0"?>
<!-- Example showing using mx:ColumnSeries vs using AS to
create chart series programmatically -->
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="drawChart()" layout="absolute">
<mx:Script>
<![CDATA[
import mx.graphics.SolidColor;
import mx.charts.HitData;
import mx.controls.Alert;
import mx.charts.series.ColumnSeries;
import mx.charts.series.LineSeries;
import mx.collections.ArrayCollection;
[Bindable]
public var categoryArray:ArrayCollection = new
ArrayCollection();
public function drawChart():void
var histMax:int = 25;
var histMin:int = 5;
var countMax:int = 3;
var tmpArr:Array = new Array();
categoryArray.removeAll();
for(var n:int = 0; n < 10; n++)
tmpArr[n] = histMin + Math.round((2 * n) / 20 * (histMax -
histMin));
categoryArray.addItem({data:tmpArr[n]});
var cs:ColumnSeries = new ColumnSeries();
columnchart1.series = [cs];
// Add a series to the chart with the x-values and y-values
// from the arrays and set the series type to a column chart
for(var chartSeries:int = 0; chartSeries < countMax;
chartSeries++)
var tmpseries:Array = new Array(10);
for(var i:int = 0; i < 10; i++)
tmpseries
= 1 * Math.random();
if(tmpseries > 0.5)
tmpseries
= 1;
else
tmpseries = 0;
var testArrCol:ArrayCollection = new ArrayCollection();
for(var j:int =0; j < 10; j++)
var m:Number = tmpArr[j];
var m1:Number = tmpseries[j];
testArrCol.addItem({mData:m.toString(),nData:m1.toString()});
cs = new ColumnSeries();
cs.dataProvider = testArrCol;
cs.displayName = 'Series' + chartSeries;
cs.xField = 'mData';
cs.yField = 'nData';
columnchart1.series[chartSeries] = cs;
public function myTipFunction(hitData:HitData):String
return(ColumnSeries(hitData.element).displayName +" - "+
hitData.item.mData + "\n" + "Value : "+ hitData.item.nData);
]]>
</mx:Script>
<mx:Panel title="Dynamic Series Adding Sample" width="98%"
height="90%" layout="absolute">
<mx:ColumnChart id="columnchart1" height="338"
width="396" showDataTips="true" type="stacked" x="10" y="0"
dataTipFunction="{myTipFunction}">
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="{categoryArray}"
categoryField="data"/>
</mx:horizontalAxis>
<mx:verticalAxisRenderer>
<mx:AxisRenderer visible="false"/>
</mx:verticalAxisRenderer>
</mx:ColumnChart>
</mx:Panel>
</mx:Application> -
Programitically adding column series in flex chart is not showing the chart
<?xml version="1.0"?>
<!-- Example showing using mx:LineSeries vs using AS to
create chart series programmatically -->
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="drawChart()" layout="absolute">
<mx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.charts.series.ColumnSeries;
import mx.charts.series.LineSeries;
import mx.collections.ArrayCollection;
[Bindable]
public var categoryArray:ArrayCollection = new
ArrayCollection();
[Bindable]
public var sArray:ArrayCollection = new ArrayCollection();
public function drawChart():void
var histMax:int = 25;
var histMin:int = 5;
var countMax:int = 6;
var tmpArr:Array = new Array();
categoryArray.removeAll();
for(var n:int = 0; n < 10; n++)
tmpArr[n] = histMin + Math.round((2 * n) / 20 * (histMax -
histMin));
categoryArray.addItem({data:tmpArr[n]});
// Add a series to the chart with the x-values and y-values
// from the arrays and set the series type to a column chart
for(var chartSeries:int = 0; chartSeries < countMax;
chartSeries++)
var tmpseries:Array = new Array(10);
for(var i:int = 1; i < 10; i++)
tmpseries
= 3 * Math.random();
var cs:ColumnSeries = new ColumnSeries();
columnchart1.series.join( = [cs];
sArray.addItem({data:tmpseries});
//columnchart1.dataProvider = sArray;
cs = new ColumnSeries();
cs.dataProvider= sArray;
cs.displayName = 'Series';
cs.yField = 'data';
columnchart1.series[chartSeries] = cs;
]]>
</mx:Script>
<mx:Panel title="Dynamic Series Adding Sample"
width="195%" height="90%" layout="absolute">
<mx:ColumnChart id="columnchart1" height="338"
width="396" showDataTips="true" type="stacked" x="10" y="0">
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="{categoryArray}"
categoryField="data"/>
</mx:horizontalAxis>
<mx:verticalAxis>
<mx:LinearAxis baseAtZero="true" maximum="3"
autoAdjust="true"/>
</mx:verticalAxis>
</mx:ColumnChart>
</mx:Panel>
</mx:Application><?xml version="1.0"?>
<!-- Example showing using mx:ColumnSeries vs using AS to
create chart series programmatically -->
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="drawChart()" layout="absolute">
<mx:Script>
<![CDATA[
import mx.graphics.SolidColor;
import mx.charts.HitData;
import mx.controls.Alert;
import mx.charts.series.ColumnSeries;
import mx.charts.series.LineSeries;
import mx.collections.ArrayCollection;
[Bindable]
public var categoryArray:ArrayCollection = new
ArrayCollection();
public function drawChart():void
var histMax:int = 25;
var histMin:int = 5;
var countMax:int = 3;
var tmpArr:Array = new Array();
categoryArray.removeAll();
for(var n:int = 0; n < 10; n++)
tmpArr[n] = histMin + Math.round((2 * n) / 20 * (histMax -
histMin));
categoryArray.addItem({data:tmpArr[n]});
var cs:ColumnSeries = new ColumnSeries();
columnchart1.series = [cs];
// Add a series to the chart with the x-values and y-values
// from the arrays and set the series type to a column chart
for(var chartSeries:int = 0; chartSeries < countMax;
chartSeries++)
var tmpseries:Array = new Array(10);
for(var i:int = 0; i < 10; i++)
tmpseries
= 1 * Math.random();
if(tmpseries > 0.5)
tmpseries
= 1;
else
tmpseries = 0;
var testArrCol:ArrayCollection = new ArrayCollection();
for(var j:int =0; j < 10; j++)
var m:Number = tmpArr[j];
var m1:Number = tmpseries[j];
testArrCol.addItem({mData:m.toString(),nData:m1.toString()});
cs = new ColumnSeries();
cs.dataProvider = testArrCol;
cs.displayName = 'Series' + chartSeries;
cs.xField = 'mData';
cs.yField = 'nData';
columnchart1.series[chartSeries] = cs;
public function myTipFunction(hitData:HitData):String
return(ColumnSeries(hitData.element).displayName +" - "+
hitData.item.mData + "\n" + "Value : "+ hitData.item.nData);
]]>
</mx:Script>
<mx:Panel title="Dynamic Series Adding Sample" width="98%"
height="90%" layout="absolute">
<mx:ColumnChart id="columnchart1" height="338"
width="396" showDataTips="true" type="stacked" x="10" y="0"
dataTipFunction="{myTipFunction}">
<mx:horizontalAxis>
<mx:CategoryAxis dataProvider="{categoryArray}"
categoryField="data"/>
</mx:horizontalAxis>
<mx:verticalAxisRenderer>
<mx:AxisRenderer visible="false"/>
</mx:verticalAxisRenderer>
</mx:ColumnChart>
</mx:Panel>
</mx:Application> -
Add data series to excel chart
I have an envelope on a chart in Excel. I would like to add same test data to the chart. I can open the workbook and get my data on a worksheet, but can't figure out how to add the data series to the chart using ActiveX.
Here is some vi's that I forgot that I had for excel. In it is one vi in particular called create chart.vi have alook at it. I'm sending you the whole llb. i have not tested them in LV 8 yet.
hope they help.
Joe.
"NOTHING IS EVER EASY"
Attachments:
excel.llb 2092 KB -
How to remove series from a chart?
Hi,
I want to remove a serie from a chart with 2 series. I've tried app.columnChart.removeChild(app.columnChart.series[1]);
to remove the second serie, but it doesn't work. The error it writes is:
The supplied DisplayObject must be a child of the caller. Please help.
ReneThanx for reply.But this is not what i am looking for.I need
to apply different colors for each bars.I am generating charts
dynamically.The item renderer is working fine.But at specific
condition the item renderer shold ne removed from the chart series -
Series Implementation in chart components
Hi Everybody,
I want to design a custom line chart component for xcelsius. Unfortunately I could not add series to my chart component as it implemented in xcelsius line chart. I am new to xcelsius and I am not getting idea, when I will modify a property in component, how it will reflect in the property sheet. I don't know how the series part works in xcelsius components and each series holds its respective data.
Please help me.
Thanks.Let me explain you with a simple example:
Data:
Product 1, Product 2
2007, 10 , 20
2008, 30 , 50
2009, 40 , 60
Drag and drop line chart on canvas, and go to properties of the chart.
Select radio button By Series and click +
Name: Product 1
Values(Y): select the cells under product 1 i.e. 10, 30 and 40
Category Labels(X): Select cells that contains year i.e. 2007, 2008, 2009
Click + to add another series
Name: Product 2
Values(Y): select the cells under product 1 i.e. 20, 50 and 60
That's it...save and preview...you will understand how the series in this chart works.
-Anil -
Title says it all. I don't know how I can hide certain series
in a linechart. Searched the docs and different sites, but I just
can't find a method to do it. Setting the alpha of a serie to 0 is
no option because the datatips will still popup.
To make it more clear, watch
[url=http://www.wowhealers.com/healbot1.40.html]this
application[/url]. Clicking the black dots there also hides a
certain serie.
Thanks in advance :)I think you only have two options: use the alpha as you have
done and use your own function or class to handle the dataTips,
preventing the ones you don't want to show up from appearing. Or
remove the series from the chart (you don't have to destroy it,
just remove it and it can be added back).
The problem with the latter is that, say you have 3 clustered
series so there are 3 bars showing up. If you remove a series, the
other 2 bars spread out to occupy the remaining space.
If you still want to go with the alpha solution, try setting
enabled="false" on the series. I have no idea if that will work,
but if it does and you have set the alpha to 0, then it should
prevent the data tips from appearing and you won't have to write
some function or class to handle it. -
How to provide different plor series for plot chart
How to provide different plot series for a Plot Chart.
The IDs of the series are given in a ComboBox controlSeries are stored in an array. If there is only one series, then you can change it simply by "pushing" a series into a new array, and then assigning that series array to the chart. If you are replacing one series in the chart series array, then you have to figure out which to remove and put the new one in.
This LiveDocs link may help:
http://livedocs.adobe.com/flex/3/html/help.html?content=charts_intro_7.html
If this post answers your question or helps, please mark it as such. -
I have a chart in its own sheet. The chart has one series from another sheet. I'd like to add a series from yet another sheet, but can't figure out how. I can't drag the new series to the chart... thoughts?
From the user's manual:
To add a chart based on data in more than one table, first select a single table or
contiguous range of cells and create a chart, then click Charts in the toolbar, and
choose a chart type. Select the chart and hold down the Command key while clicking
or dragging cells in another table to add their data to the chart.
Whoops, that won't let you choose from different sheets, just different tables on the same sheet.
Maybe there's an easier way but what I found would work is to create the chart in the first sheet then cut and paste it into the other one so you can select the second set of data.
Message was edited by: Badunit
Message was edited by: Badunit -
Add dinamically series to a chart
Hi all,
Is there any way to dinamically add series to a chart? I.e. based on the results of a query by using pl/sql or api or similar.
Many thanksHi Javier,
why don't you use the Query Source Type="Function Returning SQL Query" feature of the series?
Create 1 series with the above type and depending how many columns you return in your chart query that many series you have. Or do I miss something?
eg.
DECLARE
vQuery VARCHAR2(32767);
BEGIN
vQuery := 'select null, to_char(o.order_timestamp, ''MON RRRR'') label, ';
IF :P1_OPTION = 'NO CLUE'
THEN
vQuery := vQuery || 'sum (decode(p.category,''Computer'',oi.quantity * oi.unit_price,0)) "Computer",
sum (decode(p.category,''Video'',oi.quantity * oi.unit_price,0)) "Video" ';
ELSE
vQuery := vQuery || 'sum (decode(p.category,''Computer'',oi.quantity * oi.unit_price,0)) "Computer",
sum (decode(p.category,''Audio'',oi.quantity * oi.unit_price,0)) "Audio",
sum (decode(p.category,''Phones'',oi.quantity * oi.unit_price,0)) "Phones" ';
END IF;
RETURN vQuery ||
'from demo_product_info p, demo_order_items oi, demo_orders o
where oi.product_id = p.product_id
and o.order_id = oi.order_id
group by to_char(o.order_timestamp, ''MON RRRR''), to_char(o.order_timestamp, ''RRRR MM'')
order by to_char(o.order_timestamp, ''RRRR MM'')';
END;Patrick
My APEX Blog: http://inside-apex.blogspot.com
The ApexLib Framework: http://apexlib.sourceforge.net
The APEX Builder Plugin: http://sourceforge.net/projects/apexplugin/ -
Interactive report Several series within same chart?
Hi
I'm about to develop a Chart-report showing several series within same chart
ex
serie1: Product A , amounts, dates
serie2: Product B , amounts, dates
etc.
It would be nice to use IntractiveReports in this case but is it possible?
Thanks for any tips & hints
Regards GASonHi Gunnar,
It's not actually possible to create a multiple-series chart using the Actions menu for an Interactive Report. Only single series charts can be generated using that option. You will need to generate a separate chart to handle your requirements, which you could obviously position on the same page as your Interactive Report. The advantage of generating a separate chart means that you can choose from a wider range of Flash chart types exposed via the Create wizards. We only support the generation of 4 chart types (Horizontal Bar, Column, Line, Pie) via the Charts Action menu on Interactive Reports, but we support 26 chart types (ranging from 2D Column to Gantt charts) via the Create wizards. You might find it useful to take a look at my sample application (http://apex.oracle.com/pls/apex/f?p=36648), and also the AnyChart online documentation (http://anychart.com/products/anychart/overview/) and chart gallery, for further information on charts.
I hope this helps.
Regards,
Hilary -
Dynamic series in flash chart & color specified for each series
Example of data:
Date Series 1 Series 2 Series 3 Series 4 Series 5 Series 6 Series 7 Series 8
A 12 22 23 22 22 10 10 10
B 10 9 55 8 8 20 20 20
C 55 2 5 88 5 15 15 15
In excel, I can get a stacked horizontal bar chart with the numbers of different series stacked and it is easy to specify the color for each series (it works with Dephi aslo).
I use a PL/SQL to generate the dynamic series for the chart. And in my application, I need to show some serires with the same color (group of series, each has a specified color). One of the solution I am trying is to input a fixed color sequence and loop it many times in the custom color theme and then insert dummy series into the SQLS. But this could be a disaster while the number of group goes up.
Anyone has better idea on this? Or is this a limiation of apex?
Thanks.As I tried, apex can support 300 series at most. Dynamic series here is not a good solution still.
-
Dynamic change color of series in line chart
Hi
I would like to be able to dynamically change the color of the individual series in a line chart, based on user preference. It works excellent having dynamic labels on the series using the &item. syntax and a before header computation.
The same approach for the color does not seem to work. I get errors like undefined entity....
Any ideas?
Best regards JesperVery surprisingly the following code (also generated by the macro recording) works ok.
(I selected the serie inside the chart instead of selecting the serie in the legend)
ActiveChart.FullSeriesCollection(1).Select
With Selection.Format.Fill
.Visible = msoTrue
.ForeColor.ObjectThemeColor = msoThemeColorAccent3
.ForeColor.TintAndShade = 0
.ForeColor.Brightness = -0.25
.Transparency = 0.3000000119
.Solid
End With
If an MVP or Microsoft official come accross this, I suggest further testing as it is very likely a bug (with the first set of code generated by Excel)
Maybe you are looking for
-
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Pl
-
Why does my lightening wire not fit the ipod nano 7th gen
Could someone tell me why does my lightening wire now not fit the ipod nano (7th gen)? I push it in but it seems to spring out and not fully connect. I only bought it 1 year ago and it is been great, but now I think it needs to go in the bin
-
My daughters ipod is disabled it says try again in 22,360, 982 minutes what do I do to make it work?
My daughter's ipod touch has locked - it says ipod disabled try again in 22, 360, 976 minutes! How do I unlock it?
-
I've just noticed that the quality of the TOC icons on my app look poor. Lots of jpg compression artifacts. This is on an iPad2 using the new IOS7 update. The TOC icons were created 70px x 70px. If they look bad on standard display they must look ter
-
Hi, I'm installing some used 7906 phones for some simple single line needs. I've got something interesting going on though - the phones boot up and register fine but then launch the services screen. If I press exit, or press the services button to