41052 Cannot find window. Invalid ID. error message in 10g
Hi guys, after migrating to 10g from 6i I am getting the above message when trying to go to another form by double clicking on an item. Can someone please help me why this is happening... and what should I do?
any help will be greatly appreciated...
hi
if u r using the following code please then u have to mention the window1 here is an example:.
set_window_property (FORMS_MDI_WINDOW, window_state, maximize);
set_window_property( 'WINDOW1' ,window_state,maximize);sarah
Similar Messages
-
Develop query_find encountering 'FRM-41052: cannot find window: invalid ID
hi,dear all.
I 'm using forms 6i to develop query_find function.
I have Written the query_find trigger on the datablock as follows:
app_find.query_find('W_MAIN', --'Window name of Data Block'
'W_QF', --'Window Name of Query Find Block'
'B_QF'); --'Query Find Block Name'
but when I click the torch , the query_find window come out after three times of showing of the error message 'FRM-41052: cannot find window: invalid ID'. So every time I have to click three times 'OK' to close the annoying message.
Can anybody give me some guides how to realise query_find?? how to avoid this error message??
thanks in advance!set_window_property('MAIN_WINDOW', TITLE, 'PACKAGE DETAILS');
Make sure that you have a window named 'MAIN_WINDOW';
YES, I do have.
form_setup_pkg.event('WHEN-NEW-FORM-INSTANCE');
IF :PARAMETER.P_PACKING_ID is NOT NULL THEN
EXECUTE_QUERY;
END IF;
Which is the code of this package?
PACKAGE BODY FORM_SETUP_PKG IS
PROCEDURE EVENT ( i_event IN VARCHAR2 )
IS
BEGIN
Modify this package body to add events during form startup
and to modify the window name and window title
IF i_event = 'PRE-FORM' THEN
SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW,WINDOW_STATE,MAXIMIZE);
SET_WINDOW_PROPERTY('BLOCKNAME',WINDOW_STATE,MAXIMIZE);
SET_WINDOW_PROPERTY(FORMS_MDI_WINDOW, TITLE, 'GEMS');
set_window_property('BLOCKNAME', TITLE, 'Template Form');
ELSIF i_event = 'WHEN-NEW-FORM-INSTANCE' THEN
null;
ELSE
null;
END IF;
END EVENT;
END;
SELECT ORDER_NUMBER,CLIENT,QUANTITY,PACKING_ID,LETTER_ORDER_CODE,
ACTUAL_CARRIER,LETTER_ORDER_NUMBER,ACTUAL_SHIPMENT_TYPE,WEIGHT,PACKAGE_NUMBER FROM PACKING WHERE CLIENT = :1
Where you set field client?
This is my code I am not selecting client anywhere, I dont know from where "Display error" is fecthing client query.
Thanks a lot for your help.
PACKAGE BODY ORDERS IS
PROCEDURE post_query IS
BEGIN
SELECT pa.ship_to_last_name,
pa.ship_to_first_name,
pa.ship_to_address1,
pa.letter_order_number,
pa.letter_order_code,
INTO :ORDERS.SHIP_TO_LAST_NAME,
:ORDERS.SHIP_TO_FIRST_NAME,
:ORDERS.SHIP_TO_ADDRESS1,
:ORDERS.LETTER_ORDER_NUMBER,
:ORDERS.LETTER_ORDER_CODE,
:ORDERS.DC
FROM packing_attr pa
WHERE pa.packing_id = :ORDERS.PACKING_ID;
end post_query;
END orders;
Thanks
Sandy -
FRM-41052:Cannot Find Window : Invalid Id
Hello,
I have developed a New Form and wanted to use the calendar in the date fields. I had added all the codes and when I added the APPSTAND.fmb in the same directory where my form lies, it gives this error : -
"FRM-41052:Cannot Find Window : Invalid Id" .
The First window gets displayed, where I feed in the parameters using LOV and then when I click on the FIND button, I get this error message window for 4-5 times before I get into the next window.
If the APPSTAND.fmb is removed from that directory, the Form runs fine without displaying the Calendar for the Date field.
Please letme know how should I go about in handling this issue.
Any suggestions would be helpful.
Thanks,
DevHi Dev,
Can you send me screen shot.
My mail id is [email protected]
aessk -
Frm 41052: cannot find window. Invalid window id
Hi,
I have a form which is opening only to half its size where i have given width=650 and height=500 in formsweb.cfg. Also i get error
frm 41052: cannot find window0. Invalid window id
but i have asscoiated the canvas with window0 in the property palette.
What do i do? Pls helpThis is probably a silly question, but does window0 exist in the form?
-
"System cannot find the path specified" error message !HELP !
Hi
In doing a program to read a string from the buffer, I am getting an error message that says "cannot find the file specified"
The file was created in a previous program and I verified it does
exist at the specified location on my hard disk.
Below is the "ReadAString" program and "WriteAString" program where the String was created.
Thanks
Joe
import java.io.*;
import java.nio.ByteBuffer;
import java.nio.channels.FileChannel;
public class ReadAString
public static void main(String[] args)
File myFile = new File("C:Documents and Settings/Gateway User/jbproject/ssd_ch10p407/src/ssd_ch10p407/charData.txt");
FileInputStream myInputFileInAStream = null;
try
myInputFileInAStream = new FileInputStream(myFile);
catch (FileNotFoundException e)
e.printStackTrace();
System.exit(1);
FileChannel myInputChannel = myInputFileInAStream.getChannel();
ByteBuffer myByteBuffer = ByteBuffer.allocate(48);
System.out.println("\nNew buffer: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
try
//size() will return the length of the file
System.out.println("\nFile contains " + myInputChannel.size() + " bytes");
//The FileChannel object keeps track of the file's current position
System.out.println(
"The file's current position before the read into the buffer is: " +
myInputChannel.position());
while (myInputChannel.read(myByteBuffer) != -1)
System.out.println("\nBuffer after read: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
System.out.println(
"The file's current position after it read into the buffer is: " +
myInputChannel.position());
System.out.println("\nString read: " +
( (ByteBuffer) (myByteBuffer.flip())).asCharBuffer().
toString());
System.out.println("Buffer after flip: \tposition = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
// set the limit to capacity and the position to 0
myByteBuffer.clear(); //clear the buffer for the next read
} //end of while loop
System.out.println("\nEOF reached.");
myInputFileInAStream.close(); //close the file and the channel
catch (IOException e) {
e.printStackTrace(System.err);
System.exit(1);
System.exit(0);
import java.io.*;
import java.nio.*;
import java.nio.channels.FileChannel;
//This program takes a text phrase (in Unicode characters;(2 bytes each character)
//and puts it into a buffer via a CharBuffer,
//then loads the buffer contents into a file channel
//then outputs to a file.
//When you have successfully run the program, go to Start | Search |
//type in "charData.txt" and examine the contents of the file. OR
//go to the notepad and open
// C:
//Documents and Settings
//GateWay User
//jbproject
//ssd_ch10p407
//src
//ssd_ch10p407
//you should see charData so right click on it and choose "open with " "Notepad"
// and verify the contents are "Garbage in Garbage out"
// each time you run the program, "Garbage in Garbage out " should be concatenated.
public class WriteAString
public static void main(String[] args)
String phrase = new String("Garbage in Garbage out\n");
String dirname = "C:/Documents and Settings/Gateway User/jbproject/ssd_ch10p407/src/ssd_ch10p407";
String filename = "charData.txt";
File dir = new File(dirname);
//now checkout the directory
if (!dir.exists()) {
if (!dir.mkdir()) { //.....create it
System.out.println("Cannot create directory: " + dirname);
System.exit(1);
else if (!dir.isDirectory()) {
System.err.println(dirname + " is not a directory");
System.exit(1);
//create the fielstream
File myFile = new File(dir, filename);
FileOutputStream myOutputFileInAStream = null; //place to store the stream reference
try
myOutputFileInAStream = new FileOutputStream(myFile, true);
System.out.println("File stream created successfully");
catch (FileNotFoundException e)
e.printStackTrace(System.err);
ByteBuffer myByteBuffer = ByteBuffer.allocate(1024); //ByteBuffer object created
CharBuffer myCharBuffer = myByteBuffer.asCharBuffer(); // create view buffer
//transfer the phrase to myByteBuffer via mycharBuffer
myCharBuffer.put(phrase);
//update myByteBuffer limit (position times 2 because each Unicode
// character takes 2 bytes) to store in the ByteBuffer
myByteBuffer.limit(2 * myCharBuffer.position());
System.out.println("myCharBuffer position is " + myCharBuffer.position());
//create the file output stream channel object
FileChannel myOutputChannel = myOutputFileInAStream.getChannel();
System.out.println("new buffer: position = " +
myByteBuffer.position() +
"\tLimit = " + myByteBuffer.limit() +
" \tcapacity = " + myByteBuffer.capacity());
//each time the program is run, the phrase is again loaded into the buffer.
// Run the program several times and open charData.txt to verify that the
//data went into the file.
//Load the data into the buffer
for (int i = 0; i < phrase.length(); i++)
myByteBuffer.putChar(phrase.charAt(i));
System.out.println("Buffer after loading : position = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
myByteBuffer.flip(); //flip the buffer ready for file write
System.out.println("Buffer after flip: position = " +
myByteBuffer.position() + "\tLimit = " +
myByteBuffer.limit() + " \tcapacity = " +
myByteBuffer.capacity());
//write this file
try
myOutputChannel.write(myByteBuffer); //write the buffer to the file channel
System.out.println("The file contains " + myOutputChannel.size() + " bytes" +
" Do you see this number double every time you run the program?");
//you should see 48 characters writen to the file each time (phrase has 24 characters)
myOutputFileInAStream.close(); //close the output stream and channel
System.out.println("Buffer contents written to file");
catch(IOException e)
e.printStackTrace(System.err);
System.exit(0);
//After running the program once my output was:
//File stream created successfully
//myCharBuffer position is 23
//new buffer: position = 0 Limit = 46 capacity = 1024
//Buffer after loading : position = 46 Limit = 46 capacity = 1024
//Buffer after flip: position = 0 Limit = 46 capacity = 1024
//The file contains 46 bytes //Do you see this number double every time you run the program?
//Buffer contents written to fileRight - File is smart. Otherwise, you'd have to build
platform-specific paths by hand, using file.seperator,
to keep your code multi-platform. Ew.
Grant
IC..
Aldaris84 bows his head in honour of the man/woman that created the clearly intelligate File class
:) -
"cannot find symbol : class Scanner" error message
I have an error message that says:
"cannot find symbol : class Scanner"
I tried typing at the top of the program
import java.util.Scanner;but I still have the same error message.
What should I do ?
Thank you in advancehttp://java.sun.com/j2se/1.5.0/docs/api/java/util/Scanner.html
Since:
1.5
look at the javadoc, it says since 1.5 so it's not there in earlier versions.
just a guess -
None of the links in my TOC or INDEX work. Cannot find file is the error message.
The files are on a networked drive. Win7. FM 8. I've renamed files. Regenerated. Created a new book. Nothing works.
I do have hyphens and underscores in the file names but no other special characters.
Need help urgently.
The error message is:
Cannot find file named
\SOL\Data\TechDocs\DRAFT\Shiva\OperatorManual\096-0461-001C-1.
fm.
Make sure that the file exists.
Note that the TOC and INDEX are listed in the book w/o a path while the body chapter has the entire path (above) listed in the book view.
ThanksIIRC, FM8 had an issue with a path having more than 5 (or 6?) sub-folders. Try bringing the files up a few levels or create a mapped network drive down to the lower levels.
-
TOC - Receiving a "Cannot find the file named" error when pressing Ctrl+alt
When I generate a TOC, it comes out beautifully. However, when I press control + alt to check my links, I receive a "cannot find the file named" error message. This happens for the majority of the links. All of the files are present along with the graphics. Everything is in the same folder. They are saved on our network. However, I have packaged and copied the files to my desktop to see if that makes a difference. I am still receiving the same error message.
Has anyone seen this before? Any solutions in Adobe world? All help is appreciated.
Salome>>> ... avoid using & in your document titles.
>> By that do you mean in your file names?
> Yes. That's correct.
That's not at all surprising. & is commonly found on lists of random "characters to avoid in directory and file names".
A comprehensive list of such characters might be impossible to assemble. Even though FM only runs on Windows these days, it could be in a VM on another OS (with its own restrictions, e.g. Mac), using a CMS (with its own restrictions) and working with virtual directories actually located on completely different operating systems (with their own restrictions, e.g. Unix, Linux/Samba, random cloud).
And then there are naming issues in the FM app itself (and other Adobe apps that might need to process the files, like Distiller), which apparently is the case for the comma problem (it may only pop up during render to PDF). -
Windows 7 Backup "The System cannot find the path specified" - Error Code 0x80070003
I'm having severe problems backing up my own machine to a share on our
FILE-SERVER as \\FILE-SERVER\Backup\
I have already backed up another PC successfully using exactly the same settings I have used on my own PC. So I presume it is nothing to do with the
FILE-SERVER or the Backup settings. It has to be something to do with what I'm trying to backup from my machine.
First some background.
This exercise all began when the Windows Server 2008 r2
O/S fell over on one of our Servers. I tried reinstalling the O/S several times, without success. In the end I grabbed another drive and re-built the O/S. I then had problems promoting it to a Domain Controller on the network.
In the end I renamed the Server from FILESERVER
to FILE-SERVER.
We routinely share four folders on what is now
FILE-SERVER:
\\FILE-SERVER\Backup
- a Folder where backups from all other machines are written, so that they will be backed up with the Server
\\FILE-SERVER\Company
- holds all our Company data
\\FILE-SERVER\GEM
- this is the application folder for our own database
\\FILE-SERVER\Install
- holds all Install files for the software we use
These are all held on a RAID 1 Array that is separate from the System Disk that fell over.
Prior to the Server falling over, I had Backup working fine on my machine.
On my Notebook PC I had made these shared folders 'Available Offline', so that I still had everything available to me when I was out of the office. They were
of course shared as \\FILESERVER\... not \\FILE-SERVER\...
Having got the Server up and going again, I began to get the Backups from the Windows 7 Client PC's going again.
I started with a Desktop, which of course did not have any Offline Files.
That proved relatively straight-forward.
I then started with my machine. Initially I did not make the above shared folders 'Available Offline'. I set up my Backup using exactly the same settings that
had worked OK on the desktop machine. But when I ran the backup I got:
The System cannot find the path specified, Error Code 0x80070003
I tried all sorts of things to get it to work:
I restored the system to the earliest point possible,
I ran chkdsk,
I defragged the drive
All to no avail, so I tried backing up:
with and without a system image,
reducing the backup to a single folder,
a single Folder with only one .txt file in it,
making the Folders 'Available Offline' again.
Nothing made any difference.
In the end I looked in the Sync Center to look at the Offline Files Folder.
Under Mapped Network Drives I discovered I still had the Files and Folders from
\\FILESERVER. In their Shortcut Menu 'Always Available Offline' was greyed out. So I deleted the Offline Copies. This deleted the Files in the Folders but not the Folders.
Since I could find no way of deleting the old Mapped Network Drives, I decided I'd painted myself into a corner by renaming the Server.
So I bit the bullet and re-installed my Notebook too. This did get rid of the unwanted old Mapped Network Drives - BUT NOT THE ERROR!!
I’ve been through all the troubleshooting procedures in:
http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
Method 1
It had none of the symptoms reported in
http://support.microsoft.com/kb/973455
but I scanned for ‘reparse’ points anyway. Found several “Junction Points” but none that were “Mounted Volumes”, just ordinary ‘File Folders’.
Method 2
Check a drive for errors.
Looked at:
http://windows.microsoft.com/en-us/windows7/Check-a-drive-for-errors
Checked
both boxes. I closed machine down, to check for errors when it re-started.
It didn’t seem to find anything.
I say seem, because I did not actually see it finishing checking the empty space, but stages 1-4 found no problems and Windows 7 restarted normally.
It did detect 66 ‘Reparse’ Points, which is more than it found when I scanned for them earlier.
Method 3
Yes, I am an administrator or my own machine and, as such, I have ‘Full Access’.
I downloaded an ran the Process Monitor, filtering for Process Name “Wbengine.exe”, but did dot get a single event.
So I’m not sure what’s going on.
HELP - I'm out of ideas!
I have a WORD Document that documents all the Settings I've used on both the Server and the Clients, together with the reasoning behind those settings, but
I cannot find a way of uploading it.I am having the exact same problem with Windows 7 Professional. Out of the blue, this issue just started a few months ago when running my monthly Windows Backup where I have used a USB drive for the last 3 years, and never ever had this issue before. Most
of the solutions listed on the Microsoft websites and answers deal with
"Restore" functions, not the
"Backup" itself. I have 3 folders being skipped during the backup.
So I went and changed the Backup from "let Microsoft choose files, directories, etc" to "Let me choose". I included the files and folders that were being skipped, and ran the "Backup" again, and got the same error message,
but the files that were skipped the first time were "Backed up" finally. This issue is somehow related to my "Libraries"?
The 3 backup problems are:
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book Recordings. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book CD Label-Cover Art. Error:(The system cannot find the path specified. (0x80070003))
Backup encountered a problem while backing up file C:\Windows\System32\config\systemprofile\My Audio Books\Audio Book MP3 Tag Art. Error:(The system cannot find the path specified. (0x80070003))
Did a "checkdisk" - no problems. Ran a program to fix registry - no problems. All updates up to date. I guess I could eliminate these folders from the Backup folders in the
Library, and just choose them under the "Users" locations, and be done with it. But I really want to understand this, and fix it. This is within Windows 7 and may be related to Windows Media Player or
some recent Windows update. Thanks. -
Cannot reinstall iTunes. Receive error message Error 7 (Window error 127)
Cannot reinstall iTunes. Receive error message, Error 7 (Windows error 127)
Have you tried working through the user tip Troubleshooting issues with iTunes for Windows updates yet? If not try that, if you get stuck ask for help...
tt2 -
I am confused. I cannot get Gmail because an error message says the password or id id wrong. Also, I cannot find my iphone id.
<Personal Information Edited by Host>Friend,
When you set a Gmail account you just need to enter your email account and password. It is impossible you enter the right information but it says "wrong". Double check it.
If you mentioned "iPhone ID" as your Apple ID, you can find it going to Settings>> iCloud. Check if you already sign in to. If not, sign in with your Apple ID and password. If you haven't created one, you can do it there.
Hop it will be helpful -
FRM - 41219 CANNOT FIND REPORT INVALID ID - CALLING REPORT FROM FORM
I am using Developer Suite 10g (forms 9i, reports 9i) . windows XP.
I am using the following code in WHEN-BUTTON-PRESSED-PRESSED trigger in form to call report.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
BEGIN
repid := find_report_object('C:\EMP.RDF');
v_rep := RUN_REPORT_OBJECT(repid);
END;
as as result It is displaying FRM - 41219 CANNOT FIND REPORT INVALID ID.
I have used the EMP.JSP also in find_report_object built-in. But there is no difference.
what could be the reason - plz give the solution.
with thanks
by GMSUnless you made a mistake and overlooked it, what I suggested should work. Having said that, you did not mention the exact Forms version you are using. There may have been a problem in the version you are using which was corrected in a later release. I tested the example I offered using Forms 10.1.2.3 and it works correctly. Carefully review what you did. Verify that the file actually exists in the file system. Also, I would recommend renaming the file with all lower case letters and referencing it in the form with all lower case letters. Here is the complete code of the form I tested. I will also include the property values from the Report object.
Report1 settings:
Name - REPORT1
Subclass Information -
Comments -
Filename - dummy.rdf
Execution Mode - Batch
Communication Mode - Synchronous
Data Source Data Block - <Null>
Query Name -
Report Destination Type - File
Report Destination Name -
Report Destination Format -
Report Server -
Other Reports Parameters - On the form create the following items in BLOCK1:
Text fields:
<li>SERVERNAME
<li>REPNAME
<li>OTHERPARAMS
Button:
<li>CALL_REP
In the WHEN-BUTTON-PRESSED trigger add this code:
Declare
repid REPORT_OBJECT;
v_rep varchar2(256);
rep_status varchar2(256);
Begin
repid := find_report_object('REPORT1');
-- Set Report Object properties
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'HTML');
-- Comm mode 1 = SYNCHRONOUS
-- Comm mode 2 = ASYNCHRONOUS
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, 1);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER, :block1.SERVERNAME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME, :block1.REPNAME);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,:block1.otherparams);
SYNCHRONIZE;
-- Run report and get status
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
SYNCHRONIZE;
-- Wait for Reports to generate results
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
SYNCHRONIZE;
-- If DESTYPE is appropriate for displaying to user, execute WEB.SHOW ;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||:block1.SERVERNAME,'_blank');
ELSE
message(rep_status);
END IF;
END; When you run the form, enter the Report Server name and the Report filename (include the path if you have not configured REPORTS_PATH). Then click on the button. Note that the substr logic may need to be altered slightly if you are using an old version of Forms/Reports.
. -
FRM-41045 cannot find item invalid id
Hi All,
I was working with custom form my form version is 10g.
We have developed a custom form in that we have a field called invoice_date
Invoice_date declare as Date column.
And we have given all other in the property pallatte correctly.
When we click the invoice_date field this pop message is coming
FRM-41045 cannot find item invalid id 10-15 times and then we are selecting the date.
Regards
SrikkanthHi,
You better post it on e-business suite dedicated forum, you will have people with more expertise on customization there. Its always good that you give complete information in your post like your version,environment,etc
See if you disable the call to the calendar.show and clicking the field is giving you any error.
Regards
Yoonas -
Intermittent "Cannot find server or dns error"
We are getting "Cannot find server or dns error" intermittently. It happens most frequently using internet explorer on https. Anyone else getting this or have any suggestions?
(I have logged as TAR 1525537.999)
nullAfter many, many hours or research and corresponding with other
Oracle resources, we resolved the issue. We still receive the
"Cannot find server or DNS error" but with much, much less
frequency.
Here are the complete details:
Environment:
Windows NT 4.0 SP 6
Oracle 9iAS 1.0.2.2
Oracle 9iAS Portal 3.0.9.8.0
Oracle 8i Database 8.1.7.0.0
Apache HTTP Server: 1.3.19 (win32)
mod_ssl: 2.8.1
OpenSSL: 0.9.5a
SSL port: 443
Problem:
We were running into the following error intermittently (but very
frequently) when accessing pages in the Oracle Portal application
with SSL enabled:
"Cannot find server or DNS error" at the bottom of a "Page cannot
be displayed" error page.
Resolution:
7 Applied patchset for Oracle8i 8.1.7.1.1 (to database client and
server)
7 Applied patchset for Oracle8i 8.1.7.1.5 (to database client and
server)
7 Applied patchset for Oracle Portal 3.0.9.8.1
7 Implemented solution for Oracle Bug No. 1822053 (HTTP 404 Doing
Portal Development) by changing (and un-commenting) the following
line in our Apache http.conf file:
From: #SetEnvIf User-Agent ".*MSIE.*" nokeepalive
ssl-unclean-shutdown
To: SetEnvIf User-Agent ".*MSIE.*" ssl-unclean-shutdown
7 Implemented solution for Oracle Bug No. 1821195 (When uploading
large file using modplsql & SSL error reading data from client)
by replacing the existing ApacheModuleSSL.dll file with the
patched file referenced in the bug details.
Note: Bug No. 1821195 is for Oracle9iAS 1.0.2.2. It references
Bug No. 1773627 for Oracle9iAS 1.0.2.1.
I feel the biggest help was finding out about Bug No.
1821195/1773627. We were provided the bug details by a local
Oracle technical consultant, Dave McMarlin, referred to us by the
Oracle Joint Staff Account Manager. That solved our problem with
receiving the noted error message when we tried to add items to
the content area. Applying the change to the http.conf file
identified by Bug No. 1822053 (removing the nokeepalive entry) in
combination with the Oracle8i and Oracle Portal upgrade seems to
have solved our problems with the other intermittent occurrences
of the noted error message.
According to the details for the ApacheModuleSSL.dll patch, there
was mention of a bug in the "select" function in Windows NT 4.0:
"When checking a socket, if data can be read without blocking,
select () returns yes, but when actually reading from the socket
with recv(), that function returns WSAEWOULDBLOCK, which says
that reading would block. It seems that this problem does not
occur in usual operation, but only in an SSL enabled Apache
(modssl or apache-ssl) with https. The code for WIN32, which
handles writing to a socket, already contains a workaround for
this. The code for reading from a socket did not have a
workaround."
Oracle Technical Assistance Report and Bug Information:
TAR Number: 1727314.999
BUG Reference: 1924408
Open Date: 07/31/2001
Abstract: Intermittent "Cannot find server or DNS error" -
How do you download i-tunes onto Windows XP when error message occurs, 'This application pack could not be opened. Verify that hte package exists and that you can access it, or contact the application vendor to verify that this is a valid window installation package'.
I wish I knew because i'm having the same problem. As soon as I find the answer I will post.
Maybe you are looking for
-
Hello everybody. I have a question that I have thoroughly researched on the web with no results. I am trying to get the default After Effects "Render and Email" script to run properly. I have only been able to successfully send FROM one specific emai
-
Added target property not visible in EM12c
Hi, I have added some new target properties using emcli "add_target_property" command. I see them on targets and set values but they are not visible for selection on any EM12c screens i.e. pull down manues or setting up filters for group creation etc
-
How to start with Oracle Forms???
Hi all, I Want to develope some oracle form application and want to deploy it on web using oracle form 6i.. I go thorough some of document but now i m confuse ..... I have some question in my mind, and i want help on that..... 1)what to be require to
-
How to find out old tds certificate number for vendors who r asking duplica
Dear Expert, We have a vendor to whom we have issued tds certifcate in the year 2008 . Now the same party is asking for reprinting duplicate one. But how to get the old certificate number. If any table can be informed with document number we can trac
-
Existing iTunes Library re-written as an empty library
Occasionally (no pattern that I can discover), my library is overwritten with an empty one. I have multiple libraries to keep my content seperate and not bog down one library with my content, so I am aware of how to select one of my libraries specif