500,000 views with typekit in the CC

I saw that the typekit in the creative cloud includes 500,000 views. Is there any FAQ that shows how much extra 1,000,000 views would cost? Is it 500,000 views per site with 5 of the includes sites, or 500,000 total views between all 5 sites?
I may be totally confused as to what this means, so I apologize if my question doesnt make sense.
Thanks

this might help:- https://typekit.com/plans

Similar Messages

How to create a view with parameters; read the documentation but nothing!

Hello!
I'm new to the Oracle world but together with my coworkers we need to very quickly study Oracle to figure out whether we'll add Oracle to our list of supported databases or not.
Question: How do I create a view with parameters?
I've read the documentation but I could not find this! I found the sql syntax to create a view but no parameters whatsoever...
I have found on the web some very complicated way of doing this, but doesn't Oracle support Views with parameters?
The goal here is to return a recordset, don't forget, so,please don't speak about stored procedures unless you are going to tell me how to get a recordset out of a stored procedure! ;)
Thanks for all your help and attention!
Jorge C.

You can set up a parameterized view via context as follows:
1. Set up a procedure to set your context values:
create or replace procedure p_set_context (p_context IN VARCHAR2,p_param_name IN VARCHAR2,p_value IN VARCHAR2)
as
BEGIN
sys.dbms_session.set_context(p_context,p_param_name,p_value);
END;
2. Create your context using the procedure you just created
create or replace context my_ctx using p_set_context
3. This is the test table I'll use
create table my_table(col1 number)
and populate it:
begin
for v_index in 1..10
loop
insert into my_table values(v_index);
end loop;
end;
and the view that will be parameterised
create or replace view v_my_table as select col1 from my_table where col1 between sys_context('my_ctx','start_range') and sys_context('my_ctx','end_range')
4. Now set the parameters using the procedure above.
begin
p_set_context('my_ctx','start_range','1');
p_set_context('my_ctx','end_range','5');
end;
5. Selecting from my_table will give you 1 to 10 (no surprise there :-) )
selectng from v_my_table will give you 1 to 5
You can use the context to set formats etc using the same principle. A common gotcha to watch for is trying to set the context directly using DBMS_SESSION.SET_CONTEXT instead of creating a procedure. This belongs to SYS and SYS won't have the privileges to set your context so you get an insufficient privileges result leading to much headscratching and unnecessary grants (at least that's my understanding of it).
Sorry Jorge, as you're new to Oracle I should also have pointed out for completeness sake, that you can change the parameters at any time through recalling the p_set_context, for example, following on from above, after your "select * from v_my_table" and seeing 1 to 5, you could then do
begin
p_set_context('my_ctx','start_range','3');
end;
and when you requery 'Select * from v_my_table' you will now see rows 3 to 5.
Bit of a simplistic example, but you can see how easy it is. :-)
Message was edited by:
ian512

Creating a view with "today" as the date

Hello!
I have a project tasks list which includes start date and due date. I'm creating a sort of dashboard webpage in which I'd like to have this project tasks list included in two separate webparts, each with a different due date.
The first webpart and view will show all items for which the start date is the current date or "today" (every day it will show different items, as "today" is constantly changing).
The second view will show items which have due dates for the next three upcoming business days.
I'm assuming that this will be a filter on the view, but woul dlike to hear any recommendations.
Thanks!
Tom

Cameron has it spot on. I'd also suggest applying this to a calendar view of the list, so that you have a more visual representation of the dates.
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

How to Send biulk mail for 20,000 people with out blocking the mail server

Hi .......... ALL
I am developing a News module in our project, for this have to write code to send everyday news for 20,000 mail Ids
I Developed a code that can send to one Id or multiple.
Weather this type of mail sending treated as spam mail or blocking the mail server i did not know, any of one can please help me.
If this type is not suitable then what is way to send bulk mails please guide me
please help me......................
BY Ramds
MY Mail ID: [email protected]
Edited by: ramdasteja on Oct 3, 2008 4:13 AM

Hi .......... ALL
I am developing a News module in our project, for this have to write code to send everyday news for 20,000 mail Ids
I Developed a code that can send to one Id or multiple.
Weather this type of mail sending treated as spam mail or blocking the mail server i did not know, any of one can please help me.
If this type is not suitable then what is way to send bulk mails please guide me
please help me......................
BY Ramds
MY Mail ID: [email protected]
Edited by: ramdasteja on Oct 3, 2008 4:13 AM

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

The order doesn't work in my view with join between two lists. And now?

Hi,
I work with sharepoint 2010.
I did the join between two list follow this
post.
I did it and everything is ok, but the order doesn't work.
What can be it?
Thanks
K2rto'4 - Analista Sharepoint
"Hoje melhor do que ontem, amanhã melhor do que hoje!" 改善

Hi,
I've two lists in my view with join. The list A and the list B.
I'm ordering the view with the column list A.
The column list A it's a column for type lookup to list B's column.
In my view i'm ordering with the column list A of type lookup.
The view with join is not ordering in order growing.
I want the view will be ordering by order growing.
Do you understood?
Hugs
K2rto'4 - Analista Sharepoint
"Hoje melhor do que ontem, amanhã melhor do que hoje!" 改善

Hierarchy on HANA Calculation View with Optional Input Parameters Fails

Hi,
Has anyone succeeded in building a hierarchy on top of a calculation view with optional input parameters, where an input parameter is not filled?
The original requirement came from the wish to create a parent child hierarchy on a calculation view that was copied into the customer space from a HANA Live Financial Statement query view, but I have found the following when creating a simple level hierarchy on a calculation view that consumes one table. The Calculation View has one Input Parameter where the 'mandatory' box is unchecked.
Calculation view reads ECC table FAGLFLEXT
Simple level based hierarchy on fields PRCTR, RACCT and SEGMENT
Input parameter is used as a filter for PRCTR with logic ("EMPTY" = '$$P_PROFITCTR$$' or "PRCTR" = '$$P_PROFITCTR$$')
When I run the view I see the following behaviour in HANA Studio and Analysis for Excel
Before building the hierarchy I could run the view with or without the Input Parameter
After building the hierarchy I can run the view with the Input Parameter filled, but it fails when the Input Parameter is not filled.
Error message is "error: search table error: [2426] missing placeholder; missing value for mandatory parameter P_PROFITCTR"
P_PROFITCTR is not a mandatory parameter, but the selection for the hierarchy view thinks it should be. I don't find any notes around this issue, so I don't think it's version related, however the version I have used for this test is 1.00.70.
It's a shame we can't currently build the hierarchy as the parent child relationship is provided in HANA Live view NewGLFinancialStatementQuery.
Thanks,
Ken

Hi Ken,
We have been facing similar issue. We have even tried to set default value and as optional parameter. View still fails to create hierarchy (we are not using HANA live). As mentioned on page 97 of HANA modelling guide input parameter is mandatory from engine point of view. Hierarchy is generated as column view during the initial activation of calculation view and therefore expect a value by caller.
This seems to be a product error. Some one from HANA development team should explain this issue in detail. I would expect someone like Thomas Jung reply to us.
At the moment, we cant use input parameter for date prompt which gives us calendar popup feature for date selection. Hierarchies just don't work with input parameter. We are missing something.
Regards
Angad

Create folder view with files and tasks

Good day to you,
we want to support our software development procces with Vibe. What we are doing is, we make changes to the source code and protocol corresponding things in certain files.
We think in so called "releases" and every release consists of tasks and a list of changes. This list is held in an excel file, so I would like to create a folder view, which consists of tasks and files.
So far I could create a custom folder view with attachments at the top and a task list at the bottom, based on the task family.
The problem is, the attachment view as a standard folder view does not allow colleborative editing of attached files. You can only view and download attached files, but not open them via Office addin. Therefore you can not lock or version files, which is mandatory for collaborative work.
I would like to mix the file folder view with it's possibilities with a task folder view.
Any ideas?
Warm regards
bitschnau

There's no out of the box way to achieve what you're looking for.
Two solutions:
1. Your users would need to open the entry first and then click on the "edit this file" link.
2. You could code your own folder view or landing page element and build what you need.
HTH
Cheers
Erik
PS: Feel free to contact me offlist if you need professional support.

Materialized View with Joins

Dear Dev/DBAs,
I have the following scenario:
SQL> CREATE TABLE T1 (ID NUMBER(3),NAME VARCHAR2(10));
SQL> CREATE TABLE T2 (ID NUMBER(3),NAME VARCHAR2(10));
The T1 contains records having the ID num from 10 to 80 and the T2 having the ID from 90 to 170
SQL> SELECT * FROM T1 JOIN ALL SELECT * FROM T2
It give all records in the 2 tables.
I'm planning to create a materialized view (like CREATE MATERIALIZED VIEW V_TAB REFRESH ON COMMIT AS SELECT * FROM T1 JOIN ALL SELECT * FROM T2) and it seems i can't do with the error ORA-12054, further the oracle documentation says that materialized view can only be used with a simple join.
Do you have another solution??
Note that the materialized views can be used to improve queries.
Thank you in advance

Straight from the link I posted:
*Restrictions on Fast Refresh on Materialized Views with UNION ALL*Materialized views with the UNION ALL set operator support the REFRESH FAST option if the following conditions are satisfied:
* The defining query must have the UNION ALL operator at the top level.
The UNION ALL operator cannot be embedded inside a subquery, with one exception: The UNION ALL can be in a subquery in the FROM clause provided the defining query is of the form SELECT * FROM (view or subquery with UNION ALL) as in the following example:
CREATE VIEW view_with_unionall AS
(SELECT c.rowid crid, c.cust_id, 2 umarker
FROM customers c WHERE c.cust_last_name = 'Smith'
UNION ALL
SELECT c.rowid crid, c.cust_id, 3 umarker
FROM customers c WHERE c.cust_last_name = 'Jones');
CREATE MATERIALIZED VIEW unionall_inside_view_mv
REFRESH FAST ON DEMAND AS
SELECT * FROM view_with_unionall;
Note that the view view_with_unionall satisfies the requirements for fast refresh.
* Each query block in the UNION ALL query must satisfy the requirements of a fast refreshable materialized view with aggregates or a fast refreshable materialized view with joins.
The appropriate materialized view logs must be created on the tables as required for the corresponding type of fast refreshable materialized view.
Note that the Oracle Database also allows the special case of a single table materialized view with joins only provided the ROWID column has been included in the SELECT list and in the materialized view log. This is shown in the defining query of the view view_with_unionall.
* The SELECT list of each query must include a maintenance column, called a UNION ALL marker. The UNION ALL column must have a distinct constant numeric or string value in each UNION ALL branch. Further, the marker column must appear in the same ordinal position in the SELECT list of each query block.
* Some features such as outer joins, insert-only aggregate materialized view queries and remote tables are not supported for materialized views with UNION ALL.
* Partiton Change Tracking (PCT)-based refresh is not supported for UNION ALL materialized views.
* The compatibility initialization parameter must be set to 9.2.0 or higher to create a fast refreshable materialized view with UNION ALL.

Create a view with parameter

it's posible create a view with parameters?
i want to create a view and pass it parameters, in the same way when i create a procedure or function.
i never have seen it, but i would like to know if that's posible
thanks

You cannot create a view with parameters. The only way is to use a stored proc to dynamically create the sql statement. The substitution variable approach does not work. SQL*Plus will prompt for the value of the variable at compile time (i.e. when you create the view) and use the value you provide in the view's query.
SQL> create or replace view jws_test_v as
2 select * from jws_test where flag = '&flg'
3 /
Enter value for flg: AA
old 2: select * from jws_test where flag = '&flg'
new 2: select * from jws_test where flag = 'AA'
View created.
SQL> select * from jws_test_v
2 /
no rows selected
SQL> select text from user_views where view_name = 'JWS_TEST_V'
2 /
TEXT
select "LEV1","LEV2","LEV3","LEV4","LEV5","LEV6","FC","FLAG","ONAFT","ONAPT","CU
PEFT","CUPEPT" from jws_test where flag = 'AA'This makes sense, since substitution vartiables are a sqlplus construct, not a sql or Oracle construct. A view constructed in this way would not be callable from anywhere other than sqlplus.

SQL "View" with TS?

Hello,
is it possible to handel a SQL "View" with TestStand or the Database Viewer?
I can see my tables but not the view.
greetings
schwede

Thankyou,
this is the first thing, the second is that i can`t write to the database.
If i use a table everything is ok. When i took the view i get an error-message:
-2146825037 The recordset don`t support updating. This can be a problem of the constriction of provider or lock type....
Can you help me with this, too?
greetings
schwede

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts. I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly i

Hi I'm running Addressbook and cannot clear previous entry easily when searching my data base of around 5,000 contacts.
I prefer to view in All contacts on a double page spread with details on the right page. Searching doesn't seem to work correctly in this view.
It's always the second search that is problematic.
I've tried typing over and all it seems to do is confine the search to the the entries that have come up for the previous search.
I've tried to use the x to clear the previous entry and then type the next search, same problem. The only way seems to be to move from "All Contacts" to "Groups". Then the searched name appears and I can return to All Contacts to see full details.
Surely three key press' are not the way it's supposed to work?
FYI
Processor 2.7 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 512 MB
Software Mac OS X Lion 10.7.3 (11D50d)
Address book Version 6.1 (1083)
MacBook Pro, Mac OS X (10.7.1), 8Mb RAM 2.7Ghz i7

AddressBook experts are here:
https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion#/?tagSet=1386

Need help in creating a view with Encryption for hiding the code used by the multiple users

Hi,
Can anyone help me out in creating view with encryption data to hide the stored procedure logic with other users.
I have create a stored procedure with encryted view but while running this manually temporary views are getting created, therefore the problem is if there are 500 entries then 500 temp views will get created.
Any solution to aviod creating temporary views, please refer my code below
USE [etl_validation]
GO
/****** Object: StoredProcedure [dbo].[Pr_DBAccess_mod]    Script Date: 05/23/2014 12:53:22 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[Pr_DBAccess_mod](@ETL_CONFIG_ID INT)
AS
BEGIN
DECLARE @openquery NVARCHAR(MAX),
@DATABASENAME NVARCHAR(100),
@HIERNAME NVARCHAR(100),
@TABLENAME NVARCHAR(100),
@SERVERTYPE NVARCHAR(100),
@SERVERNAME NVARCHAR(100),
@USERNAME NVARCHAR(100),
@PASSWORD NVARCHAR(100),
@ETL_CONFIG_IDN NVARCHAR(100);
SET @ETL_CONFIG_IDN=CAST(@ETL_CONFIG_ID AS NVARCHAR);
SET @TABLENAME='Department';
SET @SERVERTYPE='SQL';
SET @SERVERNAME ='192.168.31.176';
SET @DATABASENAME='AdventureWorks2008R2';
SET @HIERNAME = 'HumanResources';
IF @SERVERTYPE='SQL'
BEGIN
/*SET @openquery= 'SELECT * INTO ##TestTable
                 FROM OPENROWSET(''SQLNCLI'',''server=192.168.31.176;Trusted_Connection=yes;'','''+@query+''')'
SET @openquery= 'CREATE VIEW '+@TABLENAME+@ETL_CONFIG_IDN+
                 ' WITH ENCRYPTION AS SELECT * FROM OPENROWSET(''SQLNCLI'',''SERVER='+@SERVERNAME+';TRUSTED_CONNECTION=YES;'',''SELECT * FROM '+@DATABASENAME+'.'+@HIERNAME+'.'+@TABLENAME+''')'
SELECT @openquery
END
EXECUTE sp_executesql @openquery
END

Hi aa_rif,
According to your description and code message, you execute the sp_executesql statement in your stored procedure, it indeed create many views with a tablename and ETL_CONFIG_ID named. If you need not to use these temporary views, you can delete them when
it contains the tablename in one view name.
In addition, if you want to create view with encryption in SQL Server, you can use directly the ENCRYPTION option to encrypt the T-SQL of a view in create view commands, for more information, see:
http://learnsqlserver.in/4/Create-View-With-Encryption.aspx. if not, you can descript more detail about requriements, so that more forum members can involve into the thread and help you
out.
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

What's up with rumored Flashback infection of 500,000 MacBooks?

What's up with rumored Flashback infection of 500,000 MacBooks?

Two Helpful Links Regarding Flashback Trojan
A link to a great User Tip about the trojan: Flashback Trojan User Tip
A related link in the tip to a checker: Malware Checker Dowload Link
A Google search can reveal a variety of alternatives on how the remove the trojan should your computer get infected. This can get you started.

Cache problem is the limitation of 500,000 images. REMOVE

Mac Pro OSX 10.6 thru 10.9.
I have Bridge CS6.
I have a DEDICATED HARD DRIVE for nothing except Bridge Cache.
My problem is....
Bridge only allows for 500,000 images to be cached.
I have nearly 3 million image files.
1. Is there a way to remove this limitation?
If not....
PLEASE !!!!
Provide an option in Bridge Preferences that allows this limitation to be removed.
Simply include a Dialog Warning explaining that Bridge Cache can use up huge amounts of disk space.
Warn the user that this "No Limit" option requires a Dedicated Cache Hard Drive (internal or external) otherwise there will be crashes and hangs and the potential to use up a system boot drive's space.
For those of us who have more than 500,000 images, this change (suggested Bridge Upgrade) would be extremely helpful.
Please do not make me repeat myself.
I have a DEDICATED HARD DRIVE for nothing except Bridge Cache.
This Bride Cache Hard Drive is huge.
My only problem is the limitation of 500,000 images.
This restriction needs removal.

I understand your frustration, but then I'm not Adobe.
This is not a conduit to communicate with Adobe. Remember, you are not addressing Adobe here in the user forums. You are requesting help from volunteers users just like you who give their time free of charge.
Supposedly there are dedicated Adobe forums for feature requests and for reporting bugs. I lost track of where those are, probably because posting there is as futile as posting here.
Perhaps searching the forums directory or searching the forum itself may provide you with a link.

500,000 views with typekit in the CC

Similar Messages

Maybe you are looking for