5g 30gig iPod not working after update, Please Help!

I have a 5th gen 30gig iPod and a yesterday I tried to update it. During the update after it shut itself off and started back up the updater froze around 20%. After about two hours of waiting I forced the updater to quit (restarted it with menu/select) and then tried to turn it back on to no avail. So right now the iPod is dead.
I've tried the whole hold menu/select to reset (even for up to a min) then I did the flip hold on and off and try again method. I also tried with the iPod plugged into my PC and my Mac. I also tried using the AC adapter. All attempts resulted in failure. Because it stopped working after the update I'm confident that it isn't the battery or that the iPod is physically damaged and that this is just a software issue.
Any help would be greatly appreciated. I've had the iPod for a little over a year and therefore have no warranty for it.

I am having the same exact problem as you, it just won't boot up. The apple logo lights up on the screen for a little while and tried to boot up, then the screen goes black, and it starts over, the ipod trying,(and failing)to boot up. This goes on like this until the battery is dead. I'll repost if I figure out how to fix this.

Similar Messages

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please help

Hi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

Itunes not working after update..help please

I updated my itunes to 10.4 and since then it will not connect to the itunes store and synching is not working either. I've emailed Apple and tried their suggestions with no luck. There was a recent post on here in June with success and it was something to do with a proxy server??? Can someone help me reinstate my itunes please...i miss it!!!

Disconnect all devices from your computer. If you have not already done so after updating iTunes, repair permissions and restart your computer. If this does not work, b oot up from your install DVD and run "Repair Disk" from the Utility menu.

SA30 USB do not work after reinstall, please help!!

Hi, my SA30's USB do not work at all after reintalling, I do not have the original CD with the laptop as it is a gift from my mate.... I couldnt find the driver from the website, please could anyone help me???
I could use the USB mouse but when I plug the external hard disk in, it has no responses, I tried to search for new hardware, it couldnt detect it. Any information would be appreciate, cheers.

When you instll another OS than the recovery OEM OS you have to install the drivers and tools in a right order!
This order is on the Tools & Utilities CD in a html file! When you follow these order all hardware should be detect!
Also you can go to http://eu.computers.toshiba-europe.com and download the drivers
Bye Hans

Sales Api Is not working After Intializing(Please help it's urgent)

Hi all,
When i am executing an sales api to create lead in sql+ it s executing fine,but when i am executing the same api after intializing in SQL+ or in concurrent request,it is troughing an error like
AS_SALES_MEMBER_PVT Using Fn....
Please help Me and also look into the code...
DECLARE
q_sales_lead_id NUMBER (8);
q_sales_lead_line_out_tb VARCHAR2 (300);
q_sales_lead_cnt_out_tbl VARCHAR2 (500);
q_return_status VARCHAR2 (10);
q_msg_count NUMBER (10);
q_msg_data VARCHAR2 (800);
a_return_status VARCHAR2 (10);
a_msg_count NUMBER (10);
a_msg_data VARCHAR2 (800);
q_noteid NUMBER (4);
x_sales_lead_line_out_tbl as_sales_leads_pub.sales_lead_line_out_tbl_type;
x_sales_lead_cnt_out_tbl as_sales_leads_pub.sales_lead_cnt_out_tbl_type;
l_sales_lead_rec as_sales_leads_pub.sales_lead_rec_type;
l_sales_lead_line_tb1 as_sales_leads_pub.sales_lead_line_tbl_type;
v_party_id NUMBER (10);
v_resource_id NUMBER (10);
v_group_id NUMBER (10);
v_person_id NUMBER (10);
v_org_id NUMBER (10);
v_customer_id NUMBER (10);
v_primary_application VARCHAR2 (150);
v_secondary_application VARCHAR2 (150);
v_lead_provider_type VARCHAR2 (150);
v_nomenclature_final VARCHAR2 (150);
v_segment VARCHAR2 (150);
v_nomenclature VARCHAR2 (150);
v_nomenclature_1 VARCHAR2 (150);
v_segment_1 VARCHAR2 (150);
v_fleet_mix VARCHAR2 (150);
v_category_set_id NUMBER (10);
v_category_id NUMBER (10);
e_msg VARCHAR2 (500);
v_party_name VARCHAR2(150);
out_param VARCHAR2(150);
CURSOR c1 IS
SELECT a.*, ROWID
FROM al_vendor_sms_crmlead_in a
WHERE a.msg_flag = 'N' AND a.customer_code IS NOT NULL
AND a.models IS NOT NULL
AND a.fleet_mix IS NOT NULL
AND a.segments IS NOT NULL
AND a.lead_provider IS NOT NULL
AND a.secondary_app IS NOT NULL
AND a.cp_mobile_no IS NOT NULL
AND a.id='L';
BEGIN
For i in c1 LOOP
BEGIN
out_param :='phone validation';
SELECT ppf.party_id
INTO v_party_id
FROM per_phones pp, per_all_people_f ppf
WHERE ppf.person_id = pp.parent_id
AND pp.phone_type = 'M'
AND pp.phone_number = i.cp_mobile_no
and rownum<=1;
out_param:='Resource_invalid';
SELECT jtf.resource_id, jtm.GROUP_ID, jtf.source_business_grp_id,
jtf.source_id
INTO v_resource_id, v_group_id, v_org_id,
v_person_id
FROM apps.jtf_rs_resource_extns jtf, apps.jtf_rs_group_members jtm
WHERE jtf.resource_id = jtm.resource_id
AND jtf.end_date_active IS NULL
AND jtm.delete_flag = 'N'
AND jtf.user_name NOT LIKE 'ALM%'
--AND jtf.attribute5='Sales'
AND jtf.person_party_id = v_party_id
AND ROWNUM <= 1;
out_param:='Party_invalid';
SELECT party_id,party_name
INTO v_customer_id,v_party_name
FROM apps.hz_parties
WHERE status = 'A' AND party_number = i.customer_code;
out_param:='Sec_prim_application_invalid';
SELECT parent_flex_value_low, flex_value
INTO v_primary_application, v_secondary_application
FROM apps.fnd_flex_values_vl
WHERE parent_flex_value_low IN (
SELECT flex_value
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009667
AND enabled_flag = 'Y')
AND enabled_flag = 'Y'
AND TO_NUMBER (TRUNC (SUBSTR (attribute1, 1, 2))) =
i.secondary_app ;
out_param:='Segment_map_invalid';
SELECT Upper(REPLACE (regexp_replace (i.models, '(\s*[[:punct:]])'), ' '))
INTO v_nomenclature
FROM DUAL;
SELECT flex_value
INTO v_nomenclature_final
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009798
AND enabled_flag = 'Y'
AND end_date_active IS NULL
AND REPLACE (regexp_replace (flex_value, '(\s*[[:punct:]])'), ' ') =
v_nomenclature
AND ROWNUM <= 1;
SELECT flex_value
INTO v_segment
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009632
AND enabled_flag = 'Y'
AND end_date_active IS NULL
AND TO_NUMBER (TRUNC (SUBSTR (flex_value, 1, 2))) = i.SEGMENTS;
SELECT ffvh.flex_value, ffv.flex_value
INTO v_nomenclature_1, v_segment_1
FROM apps.fnd_flex_values_vl ffvh, apps.fnd_flex_values_vl ffv
WHERE ffv.flex_value = ffvh.parent_flex_value_low
AND ffvh.enabled_flag = 'Y'
AND ffv.flex_value_set_id = 1009632
AND ffv.enabled_flag = 'Y'
AND ffvh.flex_value_set_id = 1009798
AND ffvh.parent_flex_value_low = v_segment
AND ffvh.flex_value = v_nomenclature_final;
out_param:='Lead_provider_invalid';
SELECT flex_value
INTO v_lead_provider_type
FROM apps.fnd_flex_values_vl
WHERE flex_value_set_id = 1009718
AND end_date_active IS NULL
AND TO_NUMBER (TRUNC (SUBSTR (flex_value, 1, 2))) =
i.lead_provider;
out_param:='vehicle_res_invalid';
SELECT lookup_code
INTO v_fleet_mix
FROM apps.fnd_lookup_values_vl
WHERE lookup_type = 'VEHICLE_RESPONSE_CODE'
AND enabled_flag = 'Y'
AND TO_NUMBER (TRUNC (SUBSTR (description, 1, 2))) = i.fleet_mix;
out_param:='Category_invalid';
SELECT mic.category_set_id, mic.category_id
INTO v_category_set_id, v_category_id
FROM apps.mtl_item_categories mic, apps.mtl_categories_tl mc
WHERE mic.category_id = mc.category_id
AND organization_id = 106
AND description = v_nomenclature_final
AND ROWNUM <= 1;
out_param:='api-Error';
l_sales_lead_rec.customer_id := v_customer_id;
l_sales_lead_rec.status_code := 'NEW';
l_sales_lead_rec.attribute15 := v_segment_1;
l_sales_lead_rec.attribute12:=To_Char( i.expected_closedate,'YYYY/MM/DD HH24:MI:SS');
l_sales_lead_rec.attribute10 := v_lead_provider_type;
l_sales_lead_rec.attribute9 := v_secondary_application;
l_sales_lead_rec.attribute8 := v_primary_application;
l_sales_lead_rec.assign_to_salesforce_id := v_resource_id;
l_sales_lead_rec.assign_sales_group_id := v_group_id;
l_sales_lead_rec.assign_to_person_id := v_person_id;
l_sales_lead_rec.vehicle_response_code := v_fleet_mix;
l_sales_lead_rec.description:=v_party_name||' '||v_nomenclature;
l_sales_lead_line_tb1 (1).category_id := v_category_id;
l_sales_lead_line_tb1 (1).category_set_id := v_category_set_id;
l_sales_lead_line_tb1 (1).organization_id := v_org_id;
l_sales_lead_line_tb1 (1).quantity:=1;
as_sales_leads_pub.create_sales_lead
(p_api_version_number => 2.0,
p_init_msg_list => fnd_api.g_false,
p_commit => fnd_api.g_true,
p_validation_level => fnd_api.g_valid_level_full,
p_check_access_flag => 'Y',
p_admin_flag => 'Y',
p_admin_group_id => v_group_id,
p_identity_salesforce_id => v_resource_id,
p_sales_lead_profile_tbl => as_utility_pub.g_miss_profile_tbl,
p_sales_lead_rec => l_sales_lead_rec,
p_sales_lead_line_tbl => l_sales_lead_line_tb1,
p_sales_lead_contact_tbl => as_sales_leads_pub.g_miss_sales_lead_contact_tbl,
x_sales_lead_id => q_sales_lead_id,
x_sales_lead_line_out_tbl => x_sales_lead_line_out_tbl,
x_sales_lead_cnt_out_tbl => x_sales_lead_cnt_out_tbl,
x_return_status => q_return_status,
x_msg_count => q_msg_count,
x_msg_data => q_msg_data);
as_sales_leads_pub.Build_Lead_Sales_Team (
P_Api_Version_Number =>2.0,
P_Init_Msg_List=>FND_API.G_TRUE,
p_Commit=>FND_API.G_TRUE,
p_Validation_Level=> FND_API.G_VALID_LEVEL_FULL,
P_Admin_Group_Id =>v_group_id,
P_identity_salesforce_id=>v_resource_id,
P_salesgroup_id=> v_group_id,
P_Sales_Lead_Id=>q_sales_lead_id,
X_Return_Status=>q_return_status,
X_Msg_Count=>a_msg_count,
X_Msg_Data =>a_msg_data);
IF q_return_status = 'S'
THEN
UPDATE al_vendor_sms_crmlead_in
SET conv_status = 'S'
WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
ELSE
UPDATE al_vendor_sms_crmlead_in
SET conv_status = 'E' WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
END IF;
EXCEPTION
WHEN No_Data_Found THEN
UPDATE al_vendor_sms_crmlead_in a
SET a.conv_status = 'ERROR',error_description=out_param
WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
COMMIT;
END;
UPDATE al_vendor_sms_crmlead_in SET msg_flag='Y' WHERE unique_identifier = i.unique_identifier AND ROWID = i.ROWID;
END LOOP;
END;

Please post this question in the CRM On Demand Integration Development forum.

Restore iPod not working...please help!

I plugged in my nano recently to be met with this message "iTunes has detected an iPod in recovery mode. You must restore it before it can be used with iTunes." So I clicked on the 'restore' button in iTunes. I go through the restore process and it tells me "Your iPod has been restored to factory settings, and is restarting. Please leave the iPod connected, and it will appear in the source list once it completes the restore process". The ipod never appears in the source list and iTunes gives me the original message that it has detected an iPod in recovery mode and that I need to restore it! What is going on???!?!??!
2nd gen iPod NANO Windows XP Pro

Try changing the drive letter as indicated here.
http://docs.info.apple.com/article.html?artnum=304503

HT201412 my ipod 4G power button and volume button not working after updated to ios6. i also experience wifi issue. so deppresing!

my ipod 4G power button and volume button not working after updated to ios6.
i also experience wifi issue. my ipod can't detect any wifi signal.
so deppresing!
what should i do?
i can't put my ipod to sleep, can't adjust volume, can't shut off.
should i update to ios 6.1?
HELP

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
When iOS 6.1 comes out I would update.

My new iPad sound is not working after updating to ios 6.1

My new iPad sound not working after updating to ios 6.1. Headphones are working fine. I tried all the troubleshoot. can anyone know the answer, plz share with me

Hi,
I have exactly the same issue as everyone above. I only get sound through the slider on the ringtone in settings and through my headphones. I do not get any sound anywhere else at all.
I Have tried:
- Updating to iOS 6.1.3
-re starting the device
-checking that the device is not muted. My slider switch is set to mute rather than lock and is unmuted.
-going into general settings and reset all settings
-the device reset several times (waiting until I saw the all important apple logo)
-removing the last few apps I installed.
Nothing at all has worked, please help!
New iPadiPad

My wi-fi on my iPhone 4S is not working after updating to ios7 and is a few weeks out of warranty, the Apple store wants me to pay £160 for a new one, are they joking?!

My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!

Hi there Juicy Guava,
You may find the troubleshooting steps in the article below helpful.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
-Griff W.

My mail icon is not working after update ios 6.1.1 ????

dear sir please give me soluction.
my mail icon is not working after update of ios 6.1.1

You can only purchase apps and other media for the county's sore in which yu are located. You account, included payment method, also must be associated with that country.
Sam applies for updating apps. Note that not all apps are available in all country so y will not be able to update an app if you are in another country and that app is not available in that country or your account is not associated with that country.
You can change the country and other things by:
iOS: Changing the signed-in iTunes Store Apple ID account

Print size in Photoshop CC does not work after updating

Print size in Photoshop CC does not work after updating, it was working fine before but now when I click to go to print size either from the menu of right chicking when the hand tool is selected, the image just zooms right out until it is a tiny little box in the centre of the screen, no good what so ever, as I say it was working fine before the update.
I am using window 7 with 8 gb of ram and an I7 with a 1GB graphics card.
Can anyone help please?
thanks
Fujibill

Check the Image>Image Size and see what the print size is supposed to to be for the open document.
Also, resetting the photoshop cc preferences might fix it.
http://forums.adobe.com/thread/375776?tstart=0

Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick

After upgrading to Maverick OSX on the iMac printing from CS5 via Epson R3880 is not working correctly. In Print Settings menu the drop downs for Colour and Colour Settings are greyed out. I already re-installed PS and installed the new drivers from epson. Any ideas?

but after choosing PS manages color, the options in the print menu for choosing color (color or b&W) and color settings are not available anymore. They used to be the last three years I printed with photoshop/epson 3880.
Instead they are greyed out now.
attached screenshot:
Op 30 mei 2014, om 01:47 heeft Chris Cox <[email protected]> het volgende geschreven:
Photoshop CS5 - colour settings in Print menu not working after update Mac OSX maverick
created by Chris Cox in Photoshop General Discussion - View the full discussion
If Photoshop managed color, then the controls in the printer driver are supposed to be grayed out - that's how Apple specifies drivers to work (because only one party should be managing the print color).
So what you're describing is perfectly normal.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6420209#6420209
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Y510P SLI not working after update to Win 8.1

Hi, my SLI is not working after update to win 8.1. (i just factory reset my computer recently). i know that i have to update my vBIOS in order for my 2nd GPU to work in win 8.1. I have updated it and reboot my computer, but nothing happens and my 2nd GPU is still not working. I have checked in device manager that my 2nd gpu is working properly. I have not update my drivers to the latest since the factory reset. Please help me out

Hi Thanks for the help, i appreciate it. But, i have already updated my BiOS for the SLI before i posted this, the actual problem is that the 2nd GPU still does not work even after the update

My 4g not working after update to ISO 7`0`3

the internet conection 4G not working After update to ISO 7-0-3 please what can i do to solv the poplem

Hi there tarig azhari,
You may find the troubleshooting steps in the article below helpful.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
-Griff W.

C7 browser not working after update to anna

c7 browser not working after update to anna.. Plz help

Hi bluz,
Welcome to the Nokia forum.
If the default browser doesn't work after updating to Anna, hard reset the device and then reinstall Anna with Nokia Suite.
Take a back up with Nokia Suite by going to Tools > Back up. When making the backup, don't tick the Settings box as this will back up the bug. Now hard reset the phone with *#7370# and default security code 12345 unless you've changed this code yourself. Once the phone has rebooted you will have an empty phone.
Now click on the green icon in Nokia Suite and reinstall the current software. Once you've done this, click on Tools > Restore to place the back up back onto your phone.
After doing the above you will be able to use the default browser again.
Let me know how you get on so that I can troubleshoot, if necessary.
Iris9290
If my post has helped you in any way, please accept it as a solution or click on the white star, so that other users will be able to benefit from it too.

5g 30gig iPod not working after update, Please Help!

Similar Messages

Maybe you are looking for