9.0.1 any early reports??

9.0.1 has been released. Anybody have any early reports??
Thanks,
Curtis

OK, here goes.
In Logic Pro 9, if you instantiate an EXS24 and go under Options in the GUI, you will see a Virtual Memory options area. 2 new options were added: "On, optimized for EXS 24 instances" and On, optimized for AU SI instances"
They mean exactly what they say. In 9.0, if you choose the former, you can run a ton of EXS 24s (the memory pool kicks in at a little after 1.5 GB) but ten if you start to add i.e. Omnispheres, Logic goes kablooey. If you choose the latter, you can load a surprisingly large number of 3rd party software instruments, but then if start adding more EXS24s, Logic goes kablooey.
So its is do you wish to die by drowning or by burning? Laughing
But Apple has done something under the hood with 9.0.1. Now if you choose the option prioritizing the AUs , you can also add a considerable number of EXS24s.
I have a now lowly Quad Core with 13 GB RAM under 10.6.1 and I was able to successfully load and run:
28 EXS24s
17 Kontakts
1 Play for Stormdrum 2, 4 sounds loaded
1 Omnisphere
1 Altiverb
UAD-2 FX, 1 each: Plate 140, Pultec, Precision EQ, Precision Limiter
At that point Logic became 2 sluggish to be practical.
But there is more. When you are adding instruments, at some point Logic will give you a warning that you are doing so and suggest you cut it out. (If you do not, Logic will tell you that the project has crashed, save it for you, and quit.)
When you get the warning, if you quit Logic and then re-open the project, suddenly you can add even more. I tried this 4 times and each time I could ad a little more.
Now I am not advocating pushing it to the max as I am sure Logic will get flakey and between EXS24's memory management scheme and Kontakt's memory server, I no longer trust anything Activity Monitor tells me, but clearly this is a big improvement in LP 9.0.1.
With today's computers and LP 9.0.1 and something like VE Pro and/or Plogue Bidule, I think we are at the beginning of an era where the CPU and RAM bottlenecks for running lots of software instrument instances will be a thing of the past. Very exciting.

Similar Messages

  • Links to early reports of Leopard problems

    I have collected a few links to early reports of problems with Leopard. They are mainly for my reference but others may find them useful:
    http://users.tpg.com.au/aoaug/mac_osx.html#news
    As with any major upgrade, it is evident that users should prepare for the upgrade while they are still running Tiger: Backup data and 3rd party apps, repair permissions with Disk Utility, maybe run Tech Tools to check hardware, do some further housekeeping with 3rd party apps like Macjanitor or Cocktail (links on above page). Then check out the advice for the type of upgrade and the (sometimes tedious) steps that are needed to get everything working again. Oh - and make sure you have access to the internet via another computer - just in case you need to search for advice and/or updates.
    I think I will wait a week or two until some of my favourite 3rd party apps are shown to be running happily under Leopard. Then I can enjoy all its great new features.
    Message was edited by: Michael Paine

    Brother Multi-function printer drivers need updating:
    http://www.brother.com/index.htm
    to get Twain scanning to work.
    Java does not seem to be working in Firefox (eg select fields in web forms) but the fields work OK with Safari.

  • Any standard report on INTERNAL ORDERS:Overview

    Hi Experts,
    Report I need to develop INTERNAL ORDERS:Overview with Following requirement: R u talking about this, Can u help me out with this? Do u know <b>if there is any standard report</b> as well..Many thanks1
    Report Layout
    Sample Layout 1
    Rows
    Total Direct Expenses\Total Labor Expenses
    Internal Order Number
    G\L Account (Cost Element)
    Columns
    Month (1 through 12 months)
    Actual Posting
    Sample Layout 2
    Rows
    Total Direct Expenses\Total Labor Expenses
    Internal Order Number
    G\L Account (Cost Element)
    Columns
    Projected
    Annual Total
    Month (1 through 12 months)
    Commitments
    Sample Layout 3
    Rows
    Cost Center Expense
    Cost Centers
    Internal Order Expense
    Internal Orders
    Columns
    Month (1 though 12 months)
    Actual Postings
    Note
    Division between Direct and Labor expenses is defined by cost element range. The definition is query based rather than InfoCube or ODS object based.
    Report Fields
    [Please provide the fields and their descriptions in the report layout]
    Field Name--Description-Data Element-- Info Source
    Company-- Code Company Code --SAP ECC
    Cost Element (G\L Account)--- Cost Element SAP ECC
    Cost Center --Cost Center Number SAP ECC
    Internal Order --Internal Order Number SAP ECC
    Order Group --Internal Order Group SAP ECC
    Cost Center Group --Cost Center Group SAP ECC
    Cost Element Group--- Cost Element Group SAP ECC
    Fiscal Year --Fiscal Year (same as calendar year) SAP ECC
    Month ---Month (same as fiscal period) SAP ECC
    Version (plan\actual\commitment) --Internal Order version SAP ECC
    Plan Version SAP ECC
    Amount Total Postings SAP ECC
    <b>How to do 3 different Layouts, is it 3 different reports or the user needs drag&drop watever is required for him... </b>

    You can have 3 queries embedded into a single workbook.
    May be you can also provide with all the query elements needed ( Structures, RKF, CKF )...so users can create on their own ( Query Writers ).
    You can searh Help.SAP for Buss Content queries, change em accordingly...
    First search if the datatargets provide you all information...

  • Is there any standard report for capacity of machines used /ideal

    Hi,,
    i am interested in knowing any standard report which tells us how long is my machine ( work center) ideal and how many hours i have used during a period of  say one month.
       how can we use capacity planning and work scheduling in repetitive manufacturing . pls tell me a the procedure to be followed.
    thanks in advance
    regards
    madan mohan

    Hi,
      thanks for your reply . but i am not able to get a report on  total capacity available in  the  last month and capacity i have utilized  for that month . so that i can derive my  work center ideal time during that past month.this gives  the time i have kept  the machine ideal . Is there any standard report meeting this requirement.
    pls give me  some solution
    regards
    madan

  • Is there any  standard report  for GR / IR to see as on particular date

    Hi ,
    Is there any standard report for GR/ IR  to see as on paricular date.
    please help me. points will be given.
    regards,
    Hari priya

    Hi,
    Please go to MR11.
    It may help you.
    Regards,
    Jigar

  • Is ther any standard report for GR/IR Maintenance Main Tool

    is ther any standard report for GR/IR Maintenance Main Tool ?

    Hi Salsa,
    Use Tcode MB5S --> List of GR/IR Balance.
    Assign pts, if found useful
    Regargds
    Sandeep Acharya

  • How to add a specific order type into any particular report

    Hi All,
    How to add a specific document type(order type) into any particular report in order to review OTD performance.
    I need to add one specific order type to existing reports which will help to check the performance of the delivery type for that particular order type to the users.
    Thanks,
    Raj

    Hi Rajesh,
    thanks for the reply when i tried as the way you said.. but the system is asking more details like varient. so if you can clearly specify the process for order type (VOV8-- table TVAK) so it will helpful for me.
    Thanks
    Raj

  • Is thr any std report to find vendor excise details

    Guru's
    is thr any std report to find vendor excise details like CST,LST,ECC no.
    Plz guide
    Thamks in advance

    go to SE16
    enter table name J_1IMOVEND enter
    remove Maximum No. of Hits
    press F8
    Shift+ F8
    click spreed sheet
    give file name and select path
    save
    ur excle file is ready
    reward if usefull

  • Is there any standard report which give all information about purchase orde

    hi
    is there any standard report which give all information about purchase order.
    i need following information from Purchase Order.
    Vendor No, vendorname, PO No, basic , Excise , insurance , Frieght.
    thanks .

    Hi,
    Try following
    MC$G  PURCHIS: Material Purchase Val Selection
    MC$I  PURCHIS: Material Purch Qty Selection
    Kedar K

  • Is there any standard report which give all info about purchase order.

    hi
    is there any standard report which give all information  about purchase order.
    i need following information from Purchase Order.
    Vendor No,  vendorname, PO No, basic     Excise      insurance     Frieght.
    Thanks.

    Hi,
    Following are reports for PO list.
    ME2C           Purchase Orders by Material Group  
    ME2J           Purchase Orders for Project        
    ME2K           Purch. Orders by Account Assignment
    ME2L           Purchase Orders by Vendor          
    ME2M           Purchase Orders by Material        
    ME2N           Purchase Orders by PO Number
    Message was edited by:
            Vigneswaran S

  • Purchase order field EKPO - AFNAM displayed in any standard report?

    Hello gurus,
    I can't find any standard report which contains in the layout the field Requisitioner (EKPO-AFNAM) of the Purchase Orders.
    Can you please advise if there is any? Do I need to make a query between EKKO and EKPO to get this field displayed together with the PO number?
    Thanks!!
    Marc

    Hello,
    @Venu, dynamic selections would allow me to have this field in the selection screen but not in the layout of the report (which is exactly where I need it).
    @Antony, you're confirming my fears; there is no standard PO report which contains the Requisitioner field in the layout. I know ME5A does include it, but it doesn't include the Purchase Order number as it is Purchase Requisition related.
    @All, any other suggestion besides the query? Are we missing something?
    Best,
    Marc

  • Any Standard Report to track Warranty

    Dear Experts,
                             Is there any standard report to track warranty which I am maintaining in Equipment Master???
    e.g. If i wanna see how many warranties are pending for a particular month etc.
    Thanks
    Warm regards
    Rahul
    Edited by: RManchanda on Mar 21, 2011 8:17 AM
    Edited by: RManchanda on Mar 21, 2011 8:17 AM

    Rahul,
    The reason I asked is because if you use Master Warranties, then the system does not store the end date in any tables and you would need to create a bespoke ABAP program.
    Since you populate the start/end dates, then this data is stored in the tables and can be retrieved.
    There have been a few posts on this issue (see [here|Table for warranty data of equipment; for one example)
    PeteA

  • Any standard report to show WBS,settlement, asset no and asset cost/value

    Hi All,
    Please advice . Is there any standard report to show WBS,settlement, asset no and asset cost/value ? I tried tcode kosrlist_pr but it does not show asset cost/value.. it shows only WBS,settlement and asset no.
    Thank you.
    Best Regards,
    Nies

    Dear,
    der is no such standard report to show WBS,settlement, asset no and asset cost/value as perv my knowlwdge. so do one thing select one standard report which is more similar to standard report to show WBS,settlement, asset no and asset cost/value but some of like asset no or asset cost or some other values not reflecting in that std report. den u take the Table name and field name of that particular fields which u wann reflect in the report. use the logic of STD TC of SAp which more similar to which u wanna preapre the New TC. tae help of Abaper. tell ur querry and content of ur report . he will definately do it
    if ur get my ans reward with points
    Regards
    Rakesh

  • Does SAP have any WBS report able to drill downdown detail to PO level

    Hi Expert,
    Would like to seek for your advise as below:
    a) Does SAP have any WBS report able to drill downdown detail to PO level for the assign cost?
        What is the T-code?
    b) What is the table contain WBS information with related PO level for the assign cost?
    Please help.
    Regards,
    KH

    Hi,
    a) Try CJI5 as menioned by Gokul.
    b) Try a query combining EKKN, EKPO and PRPS (if you need any other WBS detail).
    regards
    Sreekanth

  • AUC details in any Standard Report ?

    Hi PS gurus,
    Request pl let me know is there any standard report which can give details of AUC details projectwise before or after capitalisation of projects.
    Thanks in advance
    regards
    Srihari

    Hi sudhakar,
    i have tried with cjid but not getting desired info.
    i have to know the AUC positings after capitalisation of project. auc postings are  possible if the project is not closed. Once the project is closed at cj02 level, then the AUC is deactivated, u can see deactivation at as03 with auc no. in this case no one can post any costs in network-wbs-auc
    My requirement:
    After capitalisation of project, if the project is not closed by project dept and the project engineer is booked some costs and done gr/ml81n in network of the same project, then the costs are going to sit in network, and then we have to do cj88 to move from network-wbs-auc, in this case i would like to see the auc postings in any standard report. is it possible. ?
    pl help if any solution available.
    thanks in advance
    regards
    srihari

Maybe you are looking for

  • Updated to Snow Leopard 10.6.7, now wireless won't work?

    Today I installed the new Snow Leopard OS X 10.6.7 on my MacBook Pro, and now I cannot connect to wireless networks.  I've searched everywhere for answers all night to no avail.  Other macbooks and pc's can connect to the network just fine, so it's d

  • Saving as PDF with crop marks.

    I'm trying to create a Printready PDF from my Structured FM file. I recently upgraded to FM9. With earlier versions of FM we've had issues with colours not exporting correctly from FM, and I've had to print .ps files, run a colour correction script a

  • Error when using F9

    We have a problem with Outlook 2013 integration. Couple of users are facing the issue. We are on Application Version: 8.1.1.11 SIA [23030]. .When user hits F9, Outlook gets the message and opens the editor as expected. However, when he sends the lett

  • Sharing albums and keywords

    I am attempting to share an album over a lan and would like to use keywords, titles, etc. so that the other users can also search the photos. The titles are showing up but the keywords aren't showing up on the other computers. Is there something I ne

  • Worried About My Installation Method

    I'm new to Mac and just got Acrobat 9 Pro today.  I didn't read the "Readme" file before my installation attempt.  So, instead of dragging the Acrobat Pro icon to my Applications Folder, I double-clicked on it and then double-clicked on the Acrobat 9