A frame containing table looses table info when overflow occurs!
Hi,
This is a case when text frame contains a table.
when we type some content in table cell such that the size of cell increases more than the size of frame, Overflow occurs( a small '+' mark in bottom right corner of frame), and table is no more visually present in the frame.
But the problem occurs when I try to access the table property of frame via. scripting (using JSX) by using below command:
oFrame.tables.length
where oFrame is the frame object.
Note that before the overflow when we can visually see the table in frame, the above call returns '1', but once the overflow occurs(such that table is no more visually present in the frame),
the above call returns '0'.
Is this some kind of Bug in Indesign?? How can I access the table in the frame which has overflow???
Please see the screen shots below, the first one is with just one word in table cell, and next is with more text resulting in overflow.
1) oFrame.tables.length returns 1
2) oFrame.tables.length returns 0
Hi, kapoor_aman27,
try the below line.
oFrame.parentStory.tables.length returns 1
thx,
csm_phil
Similar Messages
-
I have a new iPhone - 5c, if I back my info onto iCloud is that enough so I don't loose my info when switching phones?
Hey Gilly21!
I have an article for you that deals with backups and will hopefully help you understand iOS backups better:
iTunes: About iOS backups
http://support.apple.com/kb/ht4946
You can also find more information about the action of backing up your phone with iCloud or iTunes here:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
Loosing track info when transferring music
I've suddenly started loosing track info when transferring music.
I can take a cd, copy it to My Collection (M4A, Mobile Optimised) and all the info is displayed ok. When I transfer it to my phone (N70) the track data is lost and all music is dumped into the Unknown Artist folder, yet it still shows ok in the phone folder on Music Manager on the PC. Bizarrely, previous tracks that have the correct Artist/Album etc on the phone do not show correctly in the phone folder in Music Manager.
Any clues as to what's going on? I've used Nokia Manager many times before without this problem.
PC - XP SP2
Nokia Music Manager Version 2Hi,
Please read the help topics of Music Manager which may help to resolve your issues (Hope So )
To rip a CD to your phone
Connect your phone to the PC.
Open Nokia Music Manager.
Click Options > Settings... and in the Conversion tab, select the desired conversion format and bit rate. The conversion format to be used depends on the phone model you are using. Not all phone models support the M4A conversion format. If you are uncertain about which format is supported by your phone model, it is recommended that you select the AAC format.
Still in Settings, go to the phone tab, and click Browse... to select whether you want to rip the CD to the phone's memory or to a memory card if inserted. The folder can be located in the phone memory, hard disk or a memory card depending on the phone model you are using.
Click OK to close the Settings dialog.
Insert a CD into the CD or DVD drive of your PC.
Go to the CD view and click Options > Get CD Information if available to retrieve information about the CD from the music recognition service (hosted and owned by Gracenote). Using the service requires an Internet connection. If your phone model does not support the music recognition service, you can edit the CD information manually. For more information, see Editing track information.
Highlight one or more tracks you want to rip to your phone.
Click Copy to phone.
Nokia Music Manager converts the tracks according to the settings you defined above in Step 3 and copies the tracks to your phone.
Tip:
In addition to ripping tracks from a CD to your phone, you can copy the same tracks to the My Collection view. To do this, click Options > Settings... and in the General tab, select the When copying tracks to phone, also copy them to My Collection option.
You can set the CD view to open automatically whenever you insert a CD into the CD or DVD drive of the PC. To do this, click Options > Settings... and in the General tab, select the Automatically open disc view when a CD or DVD is inserted to CD/DVD drive option.
If your PC is running Windows XP or Windows Vista, you can open Nokia Music Manager from the Windows AutoPlay dialog when you insert an audio CD into the CD or DVD drive of your PC.
To rip a CD to your phone
Connect your phone to the PC.
Open Nokia Music Manager.
Click Options > Settings... and in the Conversion tab, select the desired conversion format and bit rate. The conversion format to be used depends on the phone model you are using. Not all phone models support the M4A conversion format. If you are uncertain about which format is supported by your phone model, it is recommended that you select the AAC format.
Still in Settings, go to the phone tab, and click Browse... to select whether you want to rip the CD to the phone's memory or to a memory card if inserted. The folder can be located in the phone memory, hard disk or a memory card depending on the phone model you are using.
Click OK to close the Settings dialog.
Insert a CD into the CD or DVD drive of your PC.
Go to the CD view and click Options > Get CD Information if available to retrieve information about the CD from the music recognition service (hosted and owned by Gracenote). Using the service requires an Internet connection. If your phone model does not support the music recognition service, you can edit the CD information manually. For more information, see Editing track information.
Highlight one or more tracks you want to rip to your phone.
Click Copy to phone.
Nokia Music Manager converts the tracks according to the settings you defined above in Step 3 and copies the tracks to your phone.
Tip:
In addition to ripping tracks from a CD to your phone, you can copy the same tracks to the My Collection view. To do this, click Options > Settings... and in the General tab, select the When copying tracks to phone, also copy them to My Collection option.
You can set the CD view to open automatically whenever you insert a CD into the CD or DVD drive of the PC. To do this, click Options > Settings... and in the General tab, select the Automatically open disc view when a CD or DVD is inserted to CD/DVD drive option.
If your PC is running Windows XP or Windows Vista, you can open Nokia Music Manager from the Windows AutoPlay dialog when you insert an audio CD into the CD or DVD drive of your PC. -
Table number xrefs disappear when roundtripping the XML doc back to FM
I'm using FM 7.2p158 running on Windows XP on a Dell Optiplex GX520 with 1GB RAM. I've converted my legacy FM docs to structured FM, but my (CALS-formatted) table number xrefs disappear when I roundtrip the XML docs back to FM. How can I remedy this?
Initially, I used my own conventions to name the table part elements as I have about 10-15 specific table types and I used those Table Tag names as table elements names (Invisible2, Invisible4, StepTable, ...), so I had 10-15 elements that were true "is fm table element" types in the EDD, DTD, and R/W rules. The table number xrefs worked as they should after roundtripping FM-XML-FM and the tables' shading, ruling, and Table Tags were correct.
I consulted our XSLT developer for proper browser display of the XML files, and he suggested that I should use the CALS table model. I studied the Struct Dev Gd, then I searched this forum for postings on CALS tables and related topics and used suggestions offered by many of you good folks to create an EDD, DTD, and R/W rules to that end.
I've run some tests using many iterations of my files (both CALS and non-CALS types) to roundtrip the FM files, but I cannot get the xrefs of the table number from the CALS-version table title element to display when I roundtrip the XML doc and open it in FM. I get this:
-- In the XML doc text opened in FM, instead of "Table 1-1" for the xref, it leaves a blank space (although the source numbered table title is there).
-- In the Structure View of the same XML doc, I see the following:
- The CROSSREF element text says WHITESPACE.
- Both the CROSSREF element and its source element continue to have the (matching) "Idref" and "Id" number displayed in this view.
- The Idref attribute is disconnected from the CROSSREF element.
- The "table" element is disconnected from its container element (TableAnchor).
Once I apply the File/Import/Element Definitions command in the XML doc in FM, the XML becomes valid and both the CROSSREF Idref attribute and the table element are reconnected, but my xref of the table number is still WHITESPACE.
The XML-converted doc source text reads:
If you're using WebDrive, you will want to use the options shown
in [CROSSREF Idref = "BEHJCAJB" format = "Table Number"/] on the [IndexEntry
type = "Index" text = "WebDrive options"/]WebDrive control panel.[/Para]
[TableAnchor]
[table tabstyle = "Expressroom2" cols = "2"
colwidths = "2.198in 3.500in" colsep = "1" rowsep = "1"
frame = "all"]
[title Id = "BEHJCAJB"][?FM MARKER [Cross-Ref] 86302: TableTitle: Table 1-1
WebDrive control panel options?]WebDrive login values[/title]
[tgroup cols = "2" colsep = "1" rowsep = "1"]
[colspec colnum = "1" colname = "1" colwidth = "2.198in"]
[/colspec][colspec colnum = "2" colname = "2" colwidth = "3.500in"]
[/colspec][thead]
[row rowsep = "1"]
[entry colname = "1"][CellHeading]Field[/CellHeading][/entry]
[entry colname = "2"][CellHeading]Value[/CellHeading][/entry]
[/row]
[/thead]
But when I open the same XML-converted doc back in FM, I get the following:
"If you're using WebDrive, you will want to use the options shown in on the WebDrive control panel."
The CROSSREF Idref "BEHJCAJB" is [WHITESPACE] in the Structure View, so it's a blank space within the actual text in FM.
I have excerpts from my EDD, DTD, and R/W rules that I can post, but would make this even more lengthy. (Sorry about the current length.) What do I need to change to make the xrefs work when I roundtrip the files?
[I don't know whether it makes any difference or not, but I have changed the element names since I originally used a conversion table (to structure my legacy FM files); however, I persisted those element name changes throughout the EDD, DTD, and R/W rules files.]I'm using FM 7.2p158 running on Windows XP on a Dell Optiplex GX520 with 1GB RAM. I've converted my legacy FM docs to structured FM, but my (CALS-formatted) table number xrefs disappear when I roundtrip the XML docs back to FM. How can I remedy this?
Initially, I used my own conventions to name the table part elements as I have about 10-15 specific table types and I used those Table Tag names as table elements names (Invisible2, Invisible4, StepTable, ...), so I had 10-15 elements that were true "is fm table element" types in the EDD, DTD, and R/W rules. The table number xrefs worked as they should after roundtripping FM-XML-FM and the tables' shading, ruling, and Table Tags were correct.
I consulted our XSLT developer for proper browser display of the XML files, and he suggested that I should use the CALS table model. I studied the Struct Dev Gd, then I searched this forum for postings on CALS tables and related topics and used suggestions offered by many of you good folks to create an EDD, DTD, and R/W rules to that end.
I've run some tests using many iterations of my files (both CALS and non-CALS types) to roundtrip the FM files, but I cannot get the xrefs of the table number from the CALS-version table title element to display when I roundtrip the XML doc and open it in FM. I get this:
-- In the XML doc text opened in FM, instead of "Table 1-1" for the xref, it leaves a blank space (although the source numbered table title is there).
-- In the Structure View of the same XML doc, I see the following:
- The CROSSREF element text says WHITESPACE.
- Both the CROSSREF element and its source element continue to have the (matching) "Idref" and "Id" number displayed in this view.
- The Idref attribute is disconnected from the CROSSREF element.
- The "table" element is disconnected from its container element (TableAnchor).
Once I apply the File/Import/Element Definitions command in the XML doc in FM, the XML becomes valid and both the CROSSREF Idref attribute and the table element are reconnected, but my xref of the table number is still WHITESPACE.
The XML-converted doc source text reads:
If you're using WebDrive, you will want to use the options shown
in [CROSSREF Idref = "BEHJCAJB" format = "Table Number"/] on the [IndexEntry
type = "Index" text = "WebDrive options"/]WebDrive control panel.[/Para]
[TableAnchor]
[table tabstyle = "Expressroom2" cols = "2"
colwidths = "2.198in 3.500in" colsep = "1" rowsep = "1"
frame = "all"]
[title Id = "BEHJCAJB"][?FM MARKER [Cross-Ref] 86302: TableTitle: Table 1-1
WebDrive control panel options?]WebDrive login values[/title]
[tgroup cols = "2" colsep = "1" rowsep = "1"]
[colspec colnum = "1" colname = "1" colwidth = "2.198in"]
[/colspec][colspec colnum = "2" colname = "2" colwidth = "3.500in"]
[/colspec][thead]
[row rowsep = "1"]
[entry colname = "1"][CellHeading]Field[/CellHeading][/entry]
[entry colname = "2"][CellHeading]Value[/CellHeading][/entry]
[/row]
[/thead]
But when I open the same XML-converted doc back in FM, I get the following:
"If you're using WebDrive, you will want to use the options shown in on the WebDrive control panel."
The CROSSREF Idref "BEHJCAJB" is [WHITESPACE] in the Structure View, so it's a blank space within the actual text in FM.
I have excerpts from my EDD, DTD, and R/W rules that I can post, but would make this even more lengthy. (Sorry about the current length.) What do I need to change to make the xrefs work when I roundtrip the files?
[I don't know whether it makes any difference or not, but I have changed the element names since I originally used a conversion table (to structure my legacy FM files); however, I persisted those element name changes throughout the EDD, DTD, and R/W rules files.] -
Hi all,
i am facing problem while generating Test Result word document after successful execution of TestStand.
The Problem is :
i want to add rows Formatted as table headings, table headings are repeated when a table spans more than one page(marked as Red).
Example:
Page No. 1
| Test case Number | Test Step number |
| 100 | 100 |
Page No. 2
| Test case Number | Test Step number |
| 200 | 300 |
Test Result word document should generate with Table headings(marked as Red) in every pages of the document, but i am not getting as per above example.
Please through light on this.
Regards,
Susa.Hi Santiago,
Thank you very much for your valuable reply.
i want to generate MS-word report for TestStand after successful testing using MS-word2000.
Test report contains Actual values, Expected values and Pass/Fail status.
In my program i have customized all fields i can able to generate test report which contains Verification engineer name , test mode, test date, start time, end time Actual values, Expected values and Pass/Fail status.etc....
To put all values of test case number, Test step number, Actual values, Expected values and Pass/Fail status in to table for each time, i will
insert a row into table every time values arrives, once the table exceedes its page size it moves to the next page, next page should start with table row header but it start with values of above said parameters.
so i'm not able to repeat table row header for each page.
Please find the attached file for your reference.
Attched file expected.doc : This file contains what i wanted to generate MS-word report. Here table row header "Test Case Number and Test Step Number " is repeated in second page.
Attached file Actual output from source code.doc : This report generated from the source code. Here table row header "Test Case Number and Test Step Number" is not repeated in second page.
Do you know any property to set "repeat as header row at the top of each page" using MS-word ActiveX in CVI/Labwindows.
i think this information is sufficient for you,
Still if you need some information please ask me.
Thanks
Susa.
Attachments:
Actual output from source code.doc 25 KB
expected.doc 26 KB -
Frame 9 solution for table column + side head does not work in Frame 10 and 11
In Frame 9 structured (DITA) we could force Frame to record the actual widths of table columns in the DITA XML. Frame 9 would respect the widths when opening the file. This was particularly useful for forcing tables to be wide -- to go across the column and the side head -- and for the columns to never resize.
In Frame 9 this was done by commenting out the line
"writer use proportional widths;"
like this
"/* writer use proportional widths; */"
in the topic.rules.text" file located in
"...\FrameMaker9\Structure\xml\DITA\app\DITA-Topic-FM"
This no longer works in Frame10 and Frame 11. Even though the same line is commented out in all the "NAME.rules.txt" files in all the subdirectories of
"...\AdobeFrameMaker11\Structure\xml\DITA_1.2\app"
and
"...\AdobeFrameMaker11\Structure\xml\DITA\app"
and
"...\AdobeFrameMaker10\Structure\xml\DITA_1.2\app"
and
"...\AdobeFrameMaker10\Structure\xml\DITA\app" .
Commenting out the line does force Frame 10 and 11 to record the absolute column width (2.357" etc.) in the DITA XML.
However, on Open, Frame 10 and 11 force the table to fit in the column, not the column and sidehead. That is they behave as though they were still using proportional column widths. It seems the original values (as inserted by Frame 10 and 11 before closing!) are recalculated on Open, thereby mimicking the default proportional width behavior.
For example, this on Save then Close from Frame 10 or 11
<table frame = "topbot" colsep = "0" rowsep = "1">
<tgroup cols = "4" colsep = "0" rowsep = "1" outputclass = "FormatB">
<colspec colnum = "1" colname = "1" colwidth = "1.796in" colsep = "0"/>
<colspec colnum = "2" colname = "2" colwidth = "1.852in" colsep = "0"/>
<colspec colnum = "3" colname = "3" colwidth = "1.179in" colsep = "0"/>
<colspec colnum = "4" colname = "4" colwidth = "2.152in" colsep = "0"/>
goes to this on Open then Save:
<table frame = "topbot" colsep = "0" rowsep = "1">
<tgroup cols = "4" colsep = "0" rowsep = "1" outputclass = "FormatB">
<colspec colnum = "1" colname = "1" colwidth = "1.351in" colsep = "0"/>
<colspec colnum = "2" colname = "2" colwidth = "1.393in" colsep = "0"/>
<colspec colnum = "3" colname = "3" colwidth = "0.887in" colsep = "0"/>
<colspec colnum = "4" colname = "4" colwidth = "1.618in" colsep = "0"/>
Any help at all would be appreciated!
We have 8,000 to 10,000 pages to PDF in the next few days and about 33% of those pages are messed up tables!
Message was edited by: borealforestHi...
Unfortunately, I don't have any insight into the default DITA table handling in FM10 or FM11 .. so can't give you the answer you're looking for. Since both FM10 and FM11 offer ExtendScript, you could write a script (or have one written) that processes all of your files to reset the table widths. Or, perhaps the best short term solution may be to reinstall FM9 to get the job done, then spend more time later to figure out a better solution.
One alternative would be for you to use DITA-FMx, which supports the table/@pgwide attribute for controlling which tables span the page and which don't. Since your tables probably don't make use of this attribute, it won't help in the near term, but might make sense going forward.
Cheers,
Scott Prentice
Leximation, Inc.
www.leximation.com -
Table update visible only when changing table selection
I'm running java 1.6.0_07 on Linux and I'm experiencing a strange problem: I've got a table model that extends AbstractTableModel and when I selectes a row and then change such row data (thru the setData() and fireTableDataChanged() methods) I don't see the row update. If I reclick on the row or select another row in the table, the table refreshes and I can see the row updated. Is it a problem of the Java version or what? Should I change my code and force a table update in any way? Any suggestion?
Thanks,
LucaI've got a table model that extends AbstractTableModel Why? Whats wrong with the DefaultTableModel?
Is it a problem of the Java version or what?So you've written custom code and it doesn't work so the problem must be with the Java version?
Any suggestion?Use the DefaultTableModel.
If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area. -
Table Header not Recurring - when Generate PDF from HTML with tables
Hello, It is not working as expected...and I'm not sure if the functionality is supported. Want to create PDF from html document. The html document contains a html table that typically contains a large number of rows. To make reading easier the html table used thead and tbody elements, and their children, so that when the table extends across pages when printed the header element recurs on each page. However, the header element is not recurring in the generated PDF document (it only occurs in the first row of the table). Just wondering if you have tried or used this functionality (created PDF from html with table with headers and the PDF included the table with recurring table header. And if so, did you do anything special to make it work. Thanks for any insight.
If there's a problem with that package, I suggest you speak to the developer of that package and ask them to investigate. It's not an Oracle supplied package so you are wrong to look for help here.
-
Error reading table TOBJ - System Error when accessing Analysis of Change Requests
Hi Experts,
When I am trying to access Status Report or Processing time I get the following errors:
Error reading Table TOBJ - system error, An error occurred when getting data from the
processor and Log not found (in main memory).
I am not sure how this table gets populated or how to check for inconsistencies.
We have already checked the patch levels and they are on the same level for all environments.
We never had these errors in our Dev and Qa environments. We recently got a new TREX environment, could that be causing any of these errors.
Any ideas how to troubleshoot this problem?
Thanks
RiaanFor info. The problem was revolved with 2 notes.
1668882 and then apply the NWBC runtime 1963267. -
Table does not exist when creating FK Constraint across schemas
Hi all,
This will probably boil down to a permissions issue since I'm sketchy on the various levels....
I'm testing a conversion to Oracle from our legacy system. There are 4 schemas which I've created and each of those schema users have been granted DBA roles.
After creating a number of tables I wrote the SQL to create the FK Constraints. Most of them went in, but the ones crossing schemas don't. Logged in as SYS, I can do a select from each table, I can even JOIN the two in the SELECT. However when I try creating the constraint it give me a: ORA-00942: table or view does not exist
ALTER TABLE USERA.TABLEA ADD FOREIGN KEY (COLA) REFERENCES USERB.TABLEB (COLA) ON DELETE CASCADE
Again, I have scads of commands that went in correctly so this must be a permissions type thing. I'm the only one logged into the database since it's my own test system. This is 10g BTW.
If you have any suggestions as what to look into, please explain how to actually perform the checks since I'm still learning how to get around.
Thanks very much!To bulk grant, you can use dynamic SQL; somthing like this:
<BR><BR>
SQL> declare
2 l_grantor VARCHAR2(30) := 'USERA';
3 l_grantee VARCHAR2(30) := 'USERB';
4 begin
5 for table_rec in (select owner,table_name from all_tables where OWNER=l_grantor) loop
6 execute immediate 'GRANT REFERENCES ON '||table_rec.OWNER||'.'||table_rec.TABLE_NAME||' TO '||l_grantee;
7 end loop;
8 end;
9 / -
Which field ,table gets the entry when we refresh cube statistics
Hey,
I just want to know into which field or table entry is made when we Refresh statistics using the manage tab of the Infocube.. I saw the fields of the table RSDCUBE , there are two includes as given below and their fields, Im noy able to quite figure out which field gets the entry when i click on refresh statistics button in the Performance tab.
1) RSDCUBEDBFLAGS (InfoCube: DB Performance Flags): which has the following fields namely
CLEAR_INDEX Boolean
DELTA_INDEX Boolean
REBUILD_STAT Boolean
DELTA_STAT Boolean
PERCENTAGE internal use
NULLCOMP Zero elimination in the summarization module
COMP_DISJ Flag: only disjunct records
REFUPDATE No update of the non-cumulative marker
2)RSDCUBEBWSTAT (InfoCube: BW Statistics)
BWSTATISTICS Boolean
BWSTATWHM Boolean
However , when i click on refresh statics, there is a job which runs from my id which triggers the program RSDSTAT1 with variant as the cube name..
its kinda urgent... helllpp
Thanks,
vaishHey,
I just want to know into which field or table entry is made when we Refresh statistics using the manage tab of the Infocube.. I saw the fields of the table RSDCUBE , there are two includes as given below and their fields, Im noy able to quite figure out which field gets the entry when i click on refresh statistics button in the Performance tab.
1) RSDCUBEDBFLAGS (InfoCube: DB Performance Flags): which has the following fields namely
CLEAR_INDEX Boolean
DELTA_INDEX Boolean
REBUILD_STAT Boolean
DELTA_STAT Boolean
PERCENTAGE internal use
NULLCOMP Zero elimination in the summarization module
COMP_DISJ Flag: only disjunct records
REFUPDATE No update of the non-cumulative marker
2)RSDCUBEBWSTAT (InfoCube: BW Statistics)
BWSTATISTICS Boolean
BWSTATWHM Boolean
However , when i click on refresh statics, there is a job which runs from my id which triggers the program RSDSTAT1 with variant as the cube name..
its kinda urgent... helllpp
Thanks,
vaish -
How to transport the data contains in the table from development to product
How to transport the data contains in the table from development to production.
Please let me know ASAP.Hello Dilip
Create a workbench request and add the following entries to the request:
Object key: R3TR TABU <name of z-table>
For this object add the following value key:
- client-independent table: '*'
- client-dependent table (e.g. client 100): '100*'
See also: [SAP Network Blog: Transport Table Entries|/people/community.user/blog/2007/01/07/transport-table-entries]
Regards
Uwe -
Tables do not import when importing from 10gR2 to 9iR2
Hello forum members
I take full database dump from 10g database as below:
C:\Documents and Settings\Vugar>exp
Export: Release 9.2.0.1.0 - Production on Thu Aug 6 19:05:47 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: sys/sys_pass@prod as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
tion
With the Partitioning, OLAP and Data Mining options
Enter array fetch buffer size: 4096 >
Export file: EXPDAT.DMP > c:\full6.dmp
(1)E(ntire database), (2)U(sers), or (3)T(ables): (2)U > E
Export grants (yes/no): yes >
Export table data (yes/no): yes >
Compress extents (yes/no): yes >
And import the dump file in 9i database as below:
C:\Documents and Settings\Vugar>imp
Import: Release 9.2.0.1.0 - Production on Thu Aug 6 19:08:18 2009
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: sys/sys_pass as sysdba
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Import file: EXPDAT.DMP > c:\full6.dmp
Enter insert buffer size (minimum is 8192) 30720>
Export file created by EXPORT:V09.02.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
List contents of import file only (yes/no): no >
Ignore create error due to object existence (yes/no): no >
Import grants (yes/no): yes >
Import table data (yes/no): yes >
Import entire export file (yes/no): no > Y
Everything goes alright, all of the users and their grants created in the target database. But the tables and other objects of users do not create. After the full import I import every user with the from user to user clause. After that all of the objects create under each user. Can anyone tell me the reason of that, why the objects of users do not create when perfomin full import?? What is my mistake in full importing?
Thanks.Shafi Rasulov wrote:
Thanks for reply
Virendra, I exported from 10g with 9i exp utility, so 9i exp utility doesn't export incompatible objects from 10g, so it is possible full export import from 10g to 9i.
Anand, as you say, I exported/imported with 9i utility from 10g. In tha documentation and another tutorials I haven't seen any notification about missing table and another objects in the export/import.
Pavan, as you say there is several ways for migrating from 10g to 9i but I'm interested in why full export/import doesn't create tables and another objects when I do.
I say again, after I full import, I import each user with the FROM USER TO USER statement and all of the objects are created under relevant user. I want to learn the reason why the tables and another objects are not created in full import??I don't have 9i database with me to check what is happening but there should not be any error if you have used proper binary of the right version to do the export. What are those "incompatible objects" that you are talking about which are not exported/imported? You don't need to use from user/to user, if you are going to mention a 10g schema and Full=y , your import would work properly.
HTH
Aman.... -
NESTED Tables for Sub-types when creating table for Super-type
If I create the following types, as an example:
Person with subtypes: Employee and Customer
Appointment
CREATE OR REPLACE TYPE Person_OT AS OBJECT (
person# NUMBER,
personSurname VARCHAR2(50),
personForenames VARCHAR2(50),
personDateOfBirth DATE,
personAddress Address_OT,
) NOT FINAL ;
CREATE OR REPLACE TYPE Employee UNDER Person_OT (
empSalary NUMBER,
empNoSales NUMBER,
makes Appointment_List_OT
) FINAL ;
CREATE OR REPLACE TYPE Appointment_OT AS OBJECT (
some attributes
CREATE OR REPLACE TYPE Appointment_List_OT AS TABLE OF REF Appointment_OT ;
When creating the table to hold objects of Person type, how can the requisite nested table for representing 'makes' be declared? The below approach is not correct, however the table will not compile without naming the nested tables.
CREATE TABLE Person_TBL OF Person_OT (
Person# PRIMARY KEY)
NESTED TABLE makes STORE AS Appointment_List_NTBL;
Advice very much appreciated!CREATE TABLE Person_TBL OF Person_OT(
Person# PRIMARY KEY)
NESTED TABLE TREAT(SYS_NC_ROWINFO$ AS EMPLOYEE).MAKES STORE AS Appointment_List_NTBL
Table created.
SQL> select * from user_nested_tables
2 /
TABLE_NAME TABLE_TYPE_OWNER
TABLE_TYPE_NAME PARENT_TABLE_NAME
PARENT_TABLE_COLUMN
STORAGE_SPEC RETURN_TYPE ELEMENT_SUBSTITUTABLE
APPOINTMENT_LIST_NTBL SCOTT
APPOINTMENT_LIST_OT PERSON_TBL
TREAT(SYS_NC_ROWINFO$ AS "SCOTT"."EMPLOYEE")."MAKES"
DEFAULT VALUE N
SQL> SY. -
Calculated Percentage Columns in Pivot Table loose formating in Excel
I have a simple report built using pivot table ( OBIEE 11.1.1.5.0)
1 Metric and 1 dimension using pivot table. and I duplicated the metric column and change it to % column.(Show data as % of column). SO far so good. Below is the snapshot
http://tinypic.com/r/2s14xa9/7
Now i download the report in excel and all the % values are messed up . Below is how it looks
http://tinypic.com/r/bede90/7
I tried messing with data formats etc..nothing works.. I cannot add a custom column format to the metric column since it will impact the derived % column.
Is this a bug ?Any pointers ..
ThanksHi,
Follow up this SR:
SR 3-5060435331: Calculated Percentage Columns in Pivot Table loose formating in Excel
Workaround: (not sure may be give a try)
also give a try like below one then try to download it may work.
In that % column -->add the below statement in the Custom CSS section of the column properties:
mso-number-format:"\@"
Refer snapshot here:
http://i53.tinypic.com/a09kqv.jpg
This will treat the data in the column as text while downloading to excel, hence retaining any leading or trailing spaces.
Thanks
Deva
Maybe you are looking for
-
Issues updating/setting multi value lookup columns via powershell
Hi All, I have an issue updating multi values in a lookup field via powershell I can update a single value lookup field as below but can't get to update if its multi value. As stated below when I hardcode it. It works. No idea what 'm missing.
-
I'm trying to give a mailbox user Send As right for a distribution group. But the cmdlet comes back with this: Get-DistributionGroup MyGroup | Add-ADPermission -user albert -ExtendedRights Send-As Active Directory operation failed on <DC fqdn>. This
-
Unable to renew Nokia Maps license, 6600 Slide, SW...
Please can anyone help,. I have a Nokia 6600 Slide with the latest software (V6.55). I was successfully using Nokia Maps GPS navigation having purchased a license key for UK/Ireland in January 2011. I have an external bluetooth GPS device. Howver,
-
can any one tell me what are the tools of backup and recovery in the Oracle database?
-
my droid want get passed the loading screen what do i need to do