ABAP and java....... Suggestions needed
Hi All,
Just wanted to know how important is knowing java incase if u wanna continue your profession in ABAP. If yes then where should I strat from as in which all chapters ........... plz let me know where and how can learning java be useful for me.
Thanks for your time.
Rgds,
Anu.
Hey I know ABAP Objects and abap syntaxes but since I have never read java, I wanna know how important is it to know / learn syntaxes of java, when u use java with abap for technologies like XI and others do u use java syntaxes or abap object syntaxes or both............ If java Syntaxes then which all topic am I suppose to prepare to do well in this field.
Thanks.
Anu
Similar Messages
-
Error during VM container communication between ABAP and JAVA
Hello,
While creation of SC, I am getting error "Error during VM container communication between ABAP and JAVA"
Based on earlier responses in this forum, I checked following activity.
1. T Code - BBP_CND_CHECK_CUST
Result - IPC Pricing is Active and IPC is now running in VMC
2. Run Report - RSVMCRT_HEALTH_CHECK
Result - The Java component is deactivated
3. As per OSS note 854170, Profile parameters were existed as below
a) vmcj/enable - on
b) vmcj/option/maxJavaHeap = 200M
So, How to get Java component activated?
Thanks,
Rahul MandaleThanks Markus,
For SM53, I am getting resulets as " Java is not active on this application server - Message no. SVMCRT011"
Can you suggest, what I need to do for it? I can't use SRM Shopping cart because of it. thanks in advance, Rahul
and dev_w0 trace ....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Aug 31 15:45:40 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 04
M sid CUS
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 456
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 456) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 31 15:45:41 2011
M ThInit: running on host crmsys
M
M Wed Aug 31 15:45:42 2011
M calling db_connect ...
C Prepending D:\usr\sap\CUS\DVEBMGS04\exe to Path.
C
C Wed Aug 31 15:45:47 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server CRM (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Wed Aug 31 15:45:48 2011
C Now '/@CRM' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=061A3EC8,usrhp=061CA558)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C Now 'SAPSR3/<pwd>@CRM' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance CRM is running on CRMSYS with ORACLE version 10.2.0.1.0 since 20110831
B
B Wed Aug 31 15:45:49 2011
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20110831 154542 CRMSYS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 31 15:46:12 2011
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0A7C0040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AC00040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CB50040, size: 615040)
M SHM_PAGING_ADM (addr: 0CBF0040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0CC80040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0CD10040
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10E700C8, size: 30000000, end: 12B0C448)
B dbtbxbuf: Buffer TABLP (addr: 12B100C8, size: 10240000, end: 134D40C8)
B dbexpbuf: Buffer EIBUF (addr: 0FBA00D0, size: 4194304, end: 0FFA00D0)
B dbexpbuf: Buffer ESM (addr: 134E00D0, size: 4194304, end: 138E00D0)
B dbexpbuf: Buffer CUA (addr: 138F00D0, size: 3072000, end: 13BDE0D0)
B dbexpbuf: Buffer OTR (addr: 13BE00D0, size: 4194304, end: 13FE00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Wed Aug 31 15:46:15 2011
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1946AA80
S
S Wed Aug 31 15:46:16 2011
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D6D00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D6D0430
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Wed Aug 31 15:46:18 2011
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 4kb, total admin_size: 5132kb, dir_size: 5076kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Wed Aug 31 15:46:20 2011
A ABAP ShmAdm attached (addr=57A40000 leng=20955136 end=58E3C000)
A >> Shm MMADM area (addr=57EB5E58 leng=126176 end=57ED4B38)
A >> Shm MMDAT area (addr=57ED5000 leng=16150528 end=58E3C000)
A RFC Destination> destination crmsys_CUS_04 host crmsys system CUS systnr 4 (crmsys_CUS_04)
A
A Wed Aug 31 15:46:21 2011
A RFC Options> H=crmsys,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 13730 bytes at 0FFB0040
N
N Wed Aug 31 15:46:22 2011
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\CUS\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\CUS\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Wed Aug 31 15:46:23 2011
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 15, max_in_blocking_factor = 5,
B min_blocking_factor = 10, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W
W Wed Aug 31 15:46:24 2011
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.52.20050900]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [10]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume crmsys_CUS_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Wed Aug 31 15:46:48 2011
B table logging switched off for all clients
M
M Wed Aug 31 15:47:55 2011
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05BD0040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05BD07A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05BD07E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05BD07EC
A
A Wed Aug 31 15:48:44 2011
A RFC FRFC> fallback on the central gateway crmsys sapgw04 activ
B
B Wed Aug 31 15:49:47 2011
B dbmyclu : info : my major identification is 3232288873, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is D98FA690E8AA314D9B69930868792664.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2. -
Hello,
We are having MI 7.0 at SPS15.Am trying to apply add to our system(we created SDA file from NWA as an addon).SDA addon getting deployed but its not getting sync between ABAP and Java stack even if is run reload sever time from NWA->Administrator->Mobile Infrastructure->Mobile Components.I can see add-on when i check from SDM but it cannot see when i search under Mobile component in NWA.Application logs shows below error.
#703543993#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##8e6d577024d511e1a299001635730592#SAPEngine_Ap plication_Thread[impl:3]_10##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592001800000015000030100004B3E6C1311ED1#1323703575929#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##a19424a024d511e18ede001635730592#SAPEngine_Ap plication_Thread[impl:3]_9##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBea n#Plain####
#1.#001635730592000F00000016000030100004B3E6C662CEBE#1323703663073#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_ADMIN#47##n/a##d588777024d511e1c64a001635730592#SAPEngine_A pplication_Thread[impl:3]_18##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerB ean#Plain####
#1.#001635730592002000000015000030100004B3E6CDC2D7E4#1323703786809#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##1f482a9024d611e18dc1001635730592#SAPEngine_Ap plication_Thread[impl:3]_29##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#00163573059200260000000C000030100004B3E6D02A2DDA#1323703827137#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##37527e6024d611e1a43c001635730592#SAPEngine_Ap plication_Thread[impl:3]_39##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#00163573059200350000000B000030100004B3E6D1150767#1323703842528#/Applications #sap.com/tcwddispwda#com.sap.ip.mi.admin.wd.paramset.Details.Method-->wdDoModi fyView()#J2EE_ADMIN#56##uwsvt729.merck.com_VZ1_12609950#J2EE_ADMIN#2e05832024d61 1e1b753001635730592#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#com.sap .ip.mi.admin.wd.paramset.Details#Plain###Specify all parameters#
#1.#00163573059200250000007C000030100004B3E6F8460AEE#1323704500063#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##c86ab33024d711e185b5001635730592#SAPEngine_Ap plication_Thread[impl:3]_22##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592002F00000015000030100004B3E728C1AF02#1323705313486#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##ad1da59024d911e1a138001635730592#SAPEngine_Ap plication_Thread[impl:3]_37##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592000F0000000000002A400004B3E754A629F8#1323706045836#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.serverAPI.CmsOrganizerAdapter#J2E E_GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[im pl:3]_26##0#0#Info#1#com.sap.cms.pcs.serverAPI.CmsOrganizerAdapter#Plain###CMS o rganizer proxy is waiting for requests#
#1.#001635730592000F0000000100002A400004B3E754A659EE#1323706045848#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.serverAPI.CmsManagerAdapter#J2EE_ GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl :3]_26##0#0#Info#1#com.sap.cms.pcs.serverAPI.CmsManagerAdapter#Plain###CMS manag er proxy is waiting for requests#
#1.#001635730592000F0000000200002A400004B3E754A6715D#1323706045854#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.transport.proxy.CmsLogViewer#J2EE GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngineApplication_Thread[imp l:3]_26##0#0#Info#1#com.sap.cms.pcs.transport.proxy.CmsLogViewer#Plain###CMS Log Viewer is waiting for requests#
#1.#001635730592000F0000000300002A400004B3E754A67B77#1323706045857#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###CMS recovery servlet is wai ting for requests#
#1.#001635730592000F0000000400002A400004B3E754A67CE5#1323706045857#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###start recovery#
#1.#001635730592000F0000000500002A400004B3E754AA7F91#1323706046120#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###CMS recovery found 0 QueueItem(s) wi th state Import running in 0 queue(s). Start check if they are really running or need recovery.#
#1.#001635730592000F0000000600002A400004B3E754AA8344#1323706046121#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###Finished check and recovery for all CMS QueueItems of state Import running. Checked Items: 0; Recovered Items: 0; Re covery Failed Items: 0; Real running Items: 0#
#1.#001635730592000F0000000700002A400004B3E754AAACBA#1323706046132#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###CMS recovery found 0 QueueItem(s) wi th state Assembly running in 0 queue(s). Start check if they are really running or need recovery.#
#1.#001635730592000F0000000800002A400004B3E754AAAEE5#1323706046132#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###Finished check and recovery for all CMS QueueItems of state Assembly running. Checked Items: 0; Recovered Items: 0; Recovery Failed Items: 0; Real running Items: 0#
#1.#001635730592000F0000000900002A400004B3E754AAB68F#1323706046134#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###finished recovery#
#1.#00163573059200140000000300002A400004B3E7AA40154F#1323707482010#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##b9c439d024de11e1a4ee001635730592#SAPEngine_Ap plication_Thread[impl:3]_10##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
ThanksHi,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Ever wondered how and where the XI pipeline gets executed? It happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Take a look at the XI overview doc to understand this better,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a3d3c390-0201-0010-c490-bd85917138c8
Regards,
Bhavesh -
WebDispatcher on ABAP and JAVA on serperate Servers
Hi all,
i read a lot of hours trough post concerning issues about web dispatcher, but i didn't find anything that suits my problem.
We have a MSCS-Cluster. One Node has the db which is for ABAP and JAVA (different schemas).
Than we have an SCS for ABAP and one for JAVA.
So the ABAP and JAVA-Instances are physically separated.
Now we want to use a web dispatcher to pass the requests to the right destination.
But i am not sure how to set it up. Do we need 2 dispatcher, or can one handle the requests. How does the dispatcher knows, where to redirect the requests ?
Is that done with the parameter icm/HTTP/redirect_<xx> ?
in hope of any advise to this problem
yours
BjoernTrabesSo, i tested around a little bit.
i am not clear with the function of the dispatcher.
When i bind the ABAP Dispatcher, than all requests to /sap/ are handled by the ABAP-Stack an are working, but when i browse to an Adress like /irj/portal/ the dispatcher says that the Adress is noch reachable.
When i bind the dispatcher to the Java-Stack, than all Java-Adresses work, but the /sap/ not, which is the ABAP Stack.
so, i don't know exactly where my fault is.
How knows the Dispatcher, where the ABAP or JAVA-Stack is.
On an other Machine where the java is an add-in, it works quite well, but on this server the abap and Java Servers are physically separated.
greets
Bjoern
Edited by: Björn Trabes on May 18, 2009 10:59 AM -
Wanted to confirm my understaing for ABAP and JAVA mapping.
Am I correct in my assumption that these mapping techniques can be used only if input and ouput is in XML format ?
So if XI is receiving a flat comma separated text/non-XML file or an IDOC for that matter and output is NOT in XML format, say again flat text file or IDOC, I cannot use above two techniques?
All the docs I have read suggest that 'Execute' method is called when XML file/data is received, paresed using DOM/SAX/JAXB (for Java mapping) or IXML lib (for ABAP mapping) and then create a output XML file.
-Thanks in advanceHi Bob,
Here you have a code sample for deescaping. I have have written this code a couple of time ago. The incoming file can be any text format. It might be XML, but not necessarily.
The main method is not reqired, but good for testing.
Regards
Stefan
* Created on 28.09.2005
* To change the template for this generated file go to
* Window>Preferences>Java>Code Generation>Code and Comments
package sample;
import com.sap.aii.mapping.api.*;
import java.io.*;
import java.util.Map;
public class Deescaping implements StreamTransformation{
public static void main (String[] args) {
try {
InputStream in = new FileInputStream(new File("in.xml"));
OutputStream out = new FileOutputStream(new File("out.xml"));
Deescaping change = new Deescaping();
change.execute(in, out);
} catch (Exception e) {
e.printStackTrace();
public void setParameter (Map map) {
public void execute (InputStream in, OutputStream out)
throws StreamTransformationException {
try {
int c;
while ((c = in.read()) != -1) {
if (c != '&') {
out.write(c);
} else {
// ampersand
String help = "&";
boolean exit = false;
// check the next 5 chars, if there is a ';'
for (int i = 0; i < 5 && !exit; i++) {
c = in.read();
if (c == -1) {
exit = true;
} else {
// another ampersand?
if (c == '&') {
out.write(help.getBytes());
help = "&";
i = 0; // check the next 5 chars
} else {
help = help + (char) c;
if (c == ';') {
exit = true;
if (help.equals("&")) {
help = "&";
if (help.equals("<")) {
help = "<";
if (help.equals(">")) {
help = ">";
if (help.equals(""")) {
help = """;
if (help.equals("'")) {
help = "'";
} // for
out.write(help.getBytes());
} // while
out.flush();
} catch (Exception e) {
throw new StreamTransformationException(e.getMessage(),e); -
Time out parameters for ABAP and JAVA instance
Hello All,
We are looking for Time out parameters for our ABAP and JAVA instances.
As users are complaining that they are getting time out error
while they are trying to access Cprojects from Portal.
I was able to check/collect the ABAP instance parameters from SMICM Tcode.
Can anybody tell me which parameters we need to look for JAVA instance.
Thanks in advance.
Regards,
Amber Sjstart/shutdownTimeout
(jstartup/shutdown_timeout)
Specifies the shutdown timeout, i.e. the grace period for the AS Java instance to shut down before the Java process terminates itself. Unt is in Seconds. Default is 120
j2ee/ms/connectTimeout
(jstartup/wait_for_scs)
Specifies the timeout for the first connection to the message server. The AS Java instance fails to start if this timeout expires.Unt is in Seconds.Default is 60
j2ee/ms/reconnectTimeout
(jstartup/wait_for_reconnect)
Specifies the timeout for the reconnecting to the message server.The AS Java instance shuts down when this timeout expires.Unt is inSeconds.Default is 3600 (one hour)
Thanks -
RSPOR_SETUP = Different ABAP and Java support packages.
Hi all,
We have an ECC 6.0 system with abap+java stacks. When we run the RSPOR_SETUP report we get this error:
Different ABAP and Java support packages. Combination of support packages invalid
And with some more clicking we find this:
6. Compare version information of Java support package (com.sap.ip.bi classes) with ABAP support package (SAP BI)
ABAP Support Package: 13
Java Support Package: 0
On the Java stack we see (among others) these components:
sap.com BI-IBC 7.00 SP12 (1000.7.00.12.0.20070509050058)
sap.com BI_MMR 7.00 SP12 (1000.7.00.12.0.20070507084106)
sap.com BI_UDI 7.00 SP12 (1000.7.00.12.0.20070507084125)
sap.com BI-BASE-S 7.00 SP12 (1000.7.00.12.11.20080324092518)
sap.com BI-WDALV 7.00 SP12 (1000.7.00.12.1.20071105133039)
sap.com BI-REPPLAN 7.00 SP12 (1000.7.00.12.3.20080104101916)
So I believe all components are correctly installed.
What are we doing wrong?Hello.
Please be aware, that report RSPOR_SETUP should NOT be used with a Netweaver 04s system. This report has been replaced by the support desk tool. I request you to run the support desk tool as per note 937697 to check if there are any configuration issues in your system.You can resolve any red traffic lights that might be reported by the tool by following the corresponding actions suggested.
I hope I can be helpful.
Thanks,
Walter Oliveira. -
How to connect separated ABAP and Java stacks ?
Hi,
I have installed two separate ABAP and Java Stacks and trying to connect both the stacks together.
As per my understanding, only JCO RFC is the mean of communication between ABAP and Java stacks.
But still even after configuring the JCO RFC successfully, I am unable to view, configure or control
J2EE stack's status from smicm (ABAP).
Would you please suggest me, if there is any more configuration to be done on abap or Java stack side.
Thanks,
Cheers !!!
AshishHi Sunny,
JCO RFC is tested and it is working fine. So no issues from JCO RFC side. Hope you would have read carefully.
>
Ashish Mishra wrote:
> But still even after configuring the JCO RFC successfully, I am unable to view, configure or control
> J2EE stack's status from smicm (ABAP).
>
========================================================
Hi Anil ,
Thanks for your reply. but
>
Ashish Mishra wrote:
>
> I have installed two separate ABAP and Java Stacks and trying to connect both the stacks together.
>
Hope I am able to clear your doubt. Java is completely separated stack and not add-on.
Suggest me how can I proceed further on this connectivity.
=========================================================
Hi Olivier,
I am grateful to you for your reply. I understood your point but now except a successful JCO RFC test,
is there any mean to check and ensure that both the stacks are connected properly and ready to use.
Regards,
Ashish -
Individual business system for ABAP and Java Stack
Hi All,
I need to send message from a system to XI via ABAP proxy and Java proxy. The sender's ABAP and Java proxy use the same message interface to communicate with XI. Should I create one business system for the ABAP stack and one for Java stack of the sender system?
Thanks + Best Regards
JeromeAre you sending same message type from ABAP proxy and Java Proxy to XI?
If you have ABAP proxy, why do you need Java Proxy? Actually you cannot create any Java proxies on ABAP bases systems. What kind of system sender is? Java proxies are created for pure Java based applications.
Let me know if I didnt understand your question correctly. If so, please explain in detail why you need both proxies and what is your sender application.
--Archana -
Diff in web dynpro abap and Java
Hi Friends,
I am new to web dynpro ABAP and Java.
1) Please give me idea about about these two
2) In which Scenarios these are helpfull
3) From which version onwards these are existing
Thanks for your help.
Thanks,
AshaHi Ravi,
The following are basic differences between ABAP and JAVA WD.
1. ABAP WD can be developed in ABAP Workbench thru transaction SE80 whereas Java WD needs SAP NetWeaver Developer Studio.
2. Since ABAP WD is a part of the ABAP Workbench, it has direct access to ABAP dictionary. Hence access is faster.
3. In order to develop on ABAP WD, you will need basic knowledge of ABAP objects, whereas in Java WD, dev is using Java -
Hi all,
When i started studying about for implementing each and every thing in EP/EP-related things it can be done in ABAP and JAVA as well.
I am really worried about this i am already an ABAP consultant and though i have knowledge of J2EE i prefer to follow ABAP version of EP i.e. Dynpro in ABAP and Adobe forms in ABAP..
But i heard that market is good only Java version of implementing the EP.
and SAP it self is suggesting to go for JAVA version.. in that case why has it created ABAP dynpro,ADOBE forms etc etc.
why there are 2 ways (JAVA and ABAP) is it to confuse?? please help .. even if i learn ABAP version of everything will that be useful or not?? As u r already into EP,you guys can tell me is there market for ABAP version of implementing EP related things!!
Please reply.
Thanks in advance.
==============
Srini...hi srinivas....
this is what i feel abt the question......
to answer ur question, one has to think in the perspective of SAP Labs.
there are two ways of doing what u have mentioned and its not to confuse.....
ABAP is the proprietary language of SAP and therefore u dont find as many developers or intellectual manpower in ABAP as u can find for JAVA.....
SAP is trying to focus and capture the medium and small scale markets and industries for which it requires lot of manpower.....
so JAVA is its choice.....
there can be a lot more reasons behind it.....but this is what i feel.....
Regards,
Sudheer -
ADS in ABAP and JAVA on different servers
Dear community,
I need to run ADS with ABAP and JAVA on different servers but after read and apply every step on The ADS Configuration Guide, still getting doubts and problems. Those steps work succesfully on a server with ABAP+JAVA on same server. Those are the problems:
When I perform the report test FP_TEST_00 i get this error:
ADS: com.adobe.ProcessingException: Problem accessing d(200101)
I haven't found a a detailed procedure to set on ABAP and JAVA on different servers...
Do you know any procedure to set this scenario??
As a result, I don't know which role i must assign to adsuser on Java UME because i did not found any SAP_ADSCALLER role as i have ridden on some forums or blogs...
I try to set ADS on ABAP+JAVA on different servers by this official guides:
The ADS Configuration Guide:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30a9630b-4f89-2a10-6fab-e311b3ffd9a6
The ADSConfiguration Guide for Print Scenarios
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a04ef746-4c89-2a10-0f8e-eb2b3460fb7c
Thanks in advance
Kind regards
ScottieHI again,
ADS_AGENT now has sap_all but still same problem:
Creating or Changing the Destination Service, On Visual Administrator/Destinations/HTTP/ FP_ICF_DATA_<SID>
When I set the URL http://<hostname>:<HTTP_port> i am getting error Received HTTP response 502
- If I paste the http://<hostname>:<HTTP_port> +
- Enter the appropriate client number of the system, where the service user ADS_AGENT exists into the client field. Keep the other fields System ID and Language empty +
- Under Logon Data, choose BASIC in the Authentication field. +
- Enter ADS_AGENT in the Username field and enter the same password as given for this service user in the SAP NetWeaver AS ABAP in the Password field
- Choose Save and Test and Received HTTP response 502 appears.
But if I paste on Explorer http://<hostname>:<HTTP_port>/sap/bc/fp/form/layout/fp_test_00.xdp, request User (ADS_AGENT) +Pwd and work ok, so error only appears by Visual Administrator...
Anybody knows how can resolve this doubt?
Thanks in advance -
Level of Knowledge in ABAP and Java?
Hi All,
I am seeking a career in SAP Netweaver Process Integration - XI and would like to know what level of knowledge would i need to have in ABAP and Java. If i should have any what are the area's that would be expected. Please Clarify.
Your advice will be greatly appreciated.
Thank You,
Ajay C Indukuru.Hi Ajay
in addition to chirag's comment
We use ABAP Proxies in case of we are dealing with the ABAP Based Applications
We use JAVA Proxies in case of we are dealing with the JAVA based application
in SAP XI We have two ways of connectivity
1) adapter
2)proxy
in applications based on WAS 6.20 or above we can directly communicate to XI through Proxies
while application based on below WAS 6.20 you have to use adaptyer to communicate to XI
proxies seperate business application logic from the integration logic of integration logic
proxy generation converts non language specific interface description in WSDL into executable interface
Java proxy is generated from the WSDL description opf interface and this is generated as a JAR file in IR
while ABAP proxy is generated by transaction SPROXY
on Application server based on WSDL description of message interface
PROXIES have same mode and direction as Interfaces have
To learn Java you should know only basic concepts of java means you must have basic java programmin skill
Java proxy can be generated through wizard also this is an inbuild functionality of SAP XI
to lear java follow this link
java.sun.com/docs/books/tutorial/
To learn ABAP you should know beginner level ABAP4GL
ABAP is very simple language and coding is like that you are writing simple english sentence so you would be feeling comfortable withABAP with a little practice
GO to T CODE se24 and start developing
learn ABAP with this link
http://www.itquestionbank.com/sams-teach-yourself-abap-4-in-21-days.html
for more advance version you may follow SDN
in my opinion nothing is so hard to learn
i hope this may assist you
if helpful kindly reward points
Regards
Sandeep Sharma -
Upgrade of CRM 5.0 abap and java
Hi,
I have to upgrade CRM 5.0 to CRM 7.0 with EhP1. In my system landscape, CRM 5.0 ABAP (CRA) and CRM 5.0 Java (CRJ) are installed on different servers. CRJ is a portal available for end user for which CRA is acting as backend server and database. I have experienced that when we install CRM 7.0, installer automatically creates 2 seperate instances each for abap and java. I am not able to presume what exactly will happen in this kind of upgrade. My doubts are:
1. Will this upgrade CRA (abap) and CRJ (java) seperately on different server? and i connect them as i am doing currently (CRA being the UME for CRJ)?
2. While upgrading CRA, upgrade tool will ask the path of CRJ and both the instance will be upgraded simultaneously. And CRJ will behave as web ui instance after upgrade.
3. CRA will be upgraded and a new instance for WebUI will be created (let us call it CRW) and i will connect CRW with CRJ for all practical purposes? where CRJ will act as portal for CRW.
Kindly help.
Thanks.
- gauravHi,
> 1. Will this upgrade CRA (abap) and CRJ (java) seperately on different server? and i connect them as i am doing currently (CRA being the UME for CRJ)?
Yes. You need to upgrade both the servers separately. You need not to reconnect it as both the systems are already connected with each other.
> 2. While upgrading CRA, upgrade tool will ask the path of CRJ and both the instance will be upgraded simultaneously. And CRJ will behave as web ui instance after upgrade.
> 3. CRA will be upgraded and a new instance for WebUI will be created (let us call it CRW) and i will connect CRW with CRJ for all practical purposes? where CRJ will act as portal for CRW.
>
No, new instance will be created. You need to upgrade CRA and CRJ separately. WEBUI will be automatically upgraded.
Thanks
Sunny -
ABAP and JAVA: Different SP Levels
Dear Experts,
We have a newly installed DEV system for SAP PI7.1 with Ehp1 , the ABAP stack has been upgraded to SP level 5 while JAVA stack is still on basic SP (less than 5).
Now my question is will this SP mis-match cause any impact (no/ low/ medium/ high) on the performance/ working of our SAP PI7.11 system? Will we be able to do the normal development and testing with this SP level difference?
It will be very helpful if there is any document/ blog/ article which deals with such a scenario.
Thanks.Dear,
If yes then it should be fine no need to check any thing.
I found below two threads which indicate that SP level difference can cause an issue (may be while testing/ transporting).
Re: Error while posting messages to SOAP sender adapter SP 13
Re: ABAP and JAVA stack on different SP Level
Any more inputs on this topic please.
Thanks. -
Short dump Error during VM container communication between ABAP and JAVA.
Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
Error during VM container communication between ABAP and JAVA
Information on where terminated
Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!hi Willie,
this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text |
| Error during VM Container communication between ABAP and JAVA. |
|What happened? |
| The current program had to be terminated because of an |
| error when installing the R/3 System. |
| Error in the RFC layer. |
|What can you do? |
| Note which actions and entries caused the error to occur. |
| |
| Consult your SAP administrator. |
| |
| Using transaction ST22 for ABAP dump analysis, you can view, manage, |
| and retain termination messages for longer periods. |
|Error analysis |
| An error has occurred in the RFC layer during communication between |
| JAVA and the ABAP stack. This prevents data from being passed correctly |
| between the two stacks. |
| |
| Message = TH_VMC_SERV_NOT_ACTIVE |
| Return code = -1007 |
| Pointer = "000007DD348F6138" |
|How to correct the error |
| Check whether the VMC is active on your application server. To do this, |
| run transaction SM52. If the VMC is not active, contact your SAP |
| administrator. |
Regards
Charles
Maybe you are looking for
-
Installing Photoshop Elements in Windows 7
How do I install Adobe Photoshop Elements in Windows 7 ? < thread title edited by forum host >
-
A bit of a newbie here with a problem. I'm actually just doing an exercise from a book and I'm a little confused about something. I have a composition that I have set to NTSC D1. I have imported .swf footage that was created at 720x534, wider than th
-
Windows 7 64 bit ESET antivirus The sites in question are all sites that I've used frequently, they are trusted. When I read the details on the warning page at least one site had a valid certificate based on the dates. The reasons given are not all "
-
/usr/sap/trans (data/cofiles) is empty before upgrading 46C- ECC60
After homogeneous system copy from a 46C production system (PRO) to an upgrade test server (DES), and after the execution of SE06, the DES import queue is empty (/usr/sap/trans/cofiles and /usr/sap/trans/data directories doe not contain files). Some
-
Do you have to pay for updates to iPhoto and garageband?
I can't update my iPhoto and Garageband without buying the programs that I already have preinstalled on the Macbook Pro...is this normal?