ABAP API'S - CONFIGURATION ERROR

Hi All,
I am curently working on ABAP API's. While configuring the connection between the ECC and MDM in Transaction- MDMAPIC,
If the MDM server HOST name and the DBMS HOST name are exactly same, Will the configuration work?
Helpful answer will be rewarded points..
Thanks and regards
Nitin jain

Hi Nitin,
If MDM host and the DBMS host server names are same then it wont matter because in the background the they are mainly connected with the IP address.
Note: Have u entered the Ecc host name in the MDM server host file.
You can find it at the following location or just enter in Start -->> Run -->> drivers
C:\WINNT\system32\drivers\etc\host
Open host file in notepad and make an entry of IP Address and host name.
This host file contains the mappings of IP addresses to host names. Each entry should be kept on an individual line. The IP address should be placed in the first column followed by the corresponding host name.
The IP address and the host name should be separated by at least one space.
Hope dis helps u
Regards Tejas........

Similar Messages

MDM_TECH 554_700 ABAP API giving socket connection error

Hi,
I have recently installed the MDM_TECH 554_700 on a 64Bit R/3 system and configured the ABAP API thru customization for a 32Bit MDM Server. Currently I am facing a problem with 'NiRaw2ConnectError: Connection refused' error and when I checked the detailed log it shows that "ERROR => mdeKernelError, NiRawToConnectError: The attempt to establish a socket connection caused an error (rc=-10) [mdm_mdeClien 265]". I have checked the necessary kernel files ( dw_mdm.dll) to make the socket connection between the MDM system, the OSS note 965209 & 950245 and not able to trace the problem. Is it possible to make the connection between 64Bit R/3 and 32Bit MDM server? Help on this issue is highly appreciated.
Regards,
Velu

Alejandro,
The MDM ABAP API & MDM Server Versions are same. Both of them are in SP04. Here is the details on the versions:
MDM ABAP API - MDM SP04 provider, Server build 5.5.32.48 - 5.5.32.x
MDM Server 5.5 - SP04 ( 5.5.32.65)
Regards,
Velu

ABAP API Configuration

Hi All,
I am trying to make use of ABAP API from my R/3 system.
but I am not able to see the transaction MDMAPIC and many MDM related interfaces.
what could be the exact problem?
Any Service pack need to be added on normal R/3?
My R/3 system version is 4.7 with kernel patch NW2004 (640) dw patch 139 as per the How to guide.
Even I tried with R/3 5.0 with the same kernel patch.
I had maintained allow.ip at MDM server.
waiting for the reply

Hello,
using the MDM ABAP API requires SAP BASIS 6.40/7.00 and the right Kernel Patch level.
The API is not yet in SAP BASIS. That means it has to be downloaded from service marketplace and installed to the SAP System. After that the configuration will be there and the API is accessible.
Hope that helps.
Best regards,
Daniel

Abap api error

Hi All
I am trying to use abap api to fetch data from MDM and I am using the provider class for SP06 for MDM 5.5 SP05 installation .
I get the below dump when I execute my program.
" Protocol header 0108000000010000 has invalid signature"
on debugging I found that the program dumps at the place where the method INIT_SOCKET gets called.
Kindly someone help me resolve this error.
awaiting for reply
Regards

Hi everybody,
I guess this list will help most:
API Provider:>>>>>>>>>>>>>>>>>>>>> MDM Server Version:>>>>>>Name on marketplace:
CL_MDM_PROVIDER_55_SP05_PL00 >> 5.5.40.79 - 5.5.40.xx >>>>>> MDM_TECH_555
CL_MDM_PROVIDER_55_SP05_PL01 >> 5.5.41.29 - 5.5.41.xx >>>>>> MDM_TECH_555: patch 01
CL_MDM_PROVIDER_55_SP05_PL02 >> 5.5.42.30 - 5.5.42.xx >>>>>> MDM_TECH_555: patch 02
CL_MDM_PROVIDER_55_SP06_PL00 >> 5.5.60.59 - 5.5.60.xx >>>>>> MDM_TECH_555: patch 03
CL_MDM_PROVIDER_55_SP06_PL01 >> 5.5.61.43 - 5.5.61.xx >>>>>> MDM_TECH_555: patch 04
CL_MDM_PROVIDER_55_SP06_PL02 >> 5.5.62.29 - 5.5.62.xx >>>>>> MDM_TECH_555: patch 05
Thanks for rewards.
Regards
Andreas

ABAP API Connection Problem

Hi folks,
I am working with the MDM ABAP API and there are some errors that do not make any sense to me.
Here is a list with the technical information:
MDM 5.5 SP 5 (5.5.40.83)
SAP NetWeaver 2004s (700)
MDM API 555/700
I have set up the Repository information in MDMAPIC, using a new created provider of the type CL_MDM_PROVIDER_55_SP05_PL00 ( MDM5.5 SP05 Patch 0, Server Build 5.5.40.79 - 5.5.40.xx ).
I then have tried to establish the connection to the server and repository and so on according to the HowTo Guides.
When I finished yesterday, I managed to connect to my local MDM Server and to retrieve the names of the mounted repositories, but I was not able to retrieve records from a certain repository. When I wanted to solve that problem today, I was not able to connect to my MDM server anymore. There have been no changes in the coding or the configuration since then, only the MDM server has been restarted and the repository has been reloaded. But apart from that, nothing has changed but still I am not able to establish the connection anymore ( Connection refused ). Then I have tried to connect to another MDM server, but there I get another error ( Connection is not trusted ), although I have rechecked a dozen times that there is the allow.ip with the proper ID of my SAP system and the according user in the MDM repository.
From time to time, the errors change without changing anything else, just by trying to execute it a couple of times. I have figured out, that sometimes I get an error out of the above mentioned provider class ( CL_MDM_PROVIDER_55_SP05_PL00 ). Is it possible, that the MDM API is not working properly with the PL00?
Hints are appreciated a lot...!
Thanks and best regards,
Sabine

Hi,
Check whether the server is down or not. If the server is down, u will get the same error message
regards,
Nikhil

Abap API

Hi All,
I am working on a scenario where I need to use abap api to fetch data from mdm system.
Here have coded to fetch data from mdm system and done the required configurations in mdmapic transaction. but I get a dump.
It says "BSEI_MSG_BADCRC" error.
Kindly someone help me resolve this error.
I have done mdmapic configuration to use the provider class of sp06 . I also used the provider class of sp05 .both give the same error.
The build of SAPMDM is 5.5.40.83 and the provider class of spo5 in mdmapic has a build 5.5.42.79 .should the provider system have the same build . I also checked for add on with that build in service market place. It was not available.
Regards
Sudheendra

Hi,
I strongly feel it comes just because of Version Mis-matching. Your MDM Server and Provider Class shold be of same Version. as CRC always indicates Version Mismatching.
E.g. For MDM server version 5.5 SP6 patch1 then install MDM_Tech 5.5.5_640:patch004 or MDM_Tech 5.5.5_700:patch004 as per your R/3 system release.
you could check it using HowTo_07. pdf , on executing this report you could know connection to your MDM Server is estabilishing Properly or not. here in this report you have to change one Parameter logical object name which you have given in transaction MDMAPIC
you could find more Add-on patch on Service Market Place while searching in Searching for All Categories. here search using MDM_TECH
Hope it will Help you,
Rewards if useful....
Mandeep Saini

ABAP API for MDM work flow

Hi SDN,
I need some information related to ABAP API for MDM workflow. I did search in SDN and I found one solution in a thered posted on Jul-2008.
ABAP API - MDM Workflow execute
My dought is: Do we have any ABAP API for call MDM work flow. Please provide me the solution ASAP. Apprciate for your immediate response.
Regards,
Kumar.

Hi LAKSHMAN ,
To answer your question specifically
Using ABAP api you cannot call MDM workflows as of mdm 5.5 there are no functions specific to calling MDM workflows in ABAP.If you want to implement workflows on ABAP side you need to go for SAP ECC workflows which is a different topic than MDM>
To call MDM workflows over the Java stack ie WAS (SAP portal),You have 2 ways
- UWL
- Guided Procedures.
- UWL is a way of calling MDM workflows on EP.Wherein the workflow design will be done in MDM and it will only be called in portal using appropiate connections and configurations.
You can refer the below links to know more on them:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/771f1a61-0e01-0010-daa9-93a52905da09 (uwl)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45 (UWL config)
- GP is a way where by you need to design the entire workflow on SAP portal the logic can be pertaining to MDM but the design is completely on portal using webdynpros and api.
You can refer the below links to know more on them:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92811997-0d01-0010-9584-f7d535177831 (Guided procedures)
Enterprise Master Data Management (EP Guided)
To know more on ABAP api and its provider classes you can refer the below:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/601ddb01-e5c8-2910-d981-b190b51fca44 (abap api webinar)
Re: Abap api error (Abap api provider classes Forum)
Hope It Helped
Thanks & Regards
Simona Pinto

MDM ABAP API.

Hi All,
We have installed MDMTECH_554_700 on our 2004s.
We also configured all post installation steps like
1)MDM Repositories
2)MDM Server Connections
3)Mdm Dbms Hosts
4)ABAP Implementation for MDM Version Support
5)MDM API Trace Configuration.
It seems all connection settings are fine.Is there anyway to test the connection properties/configuration?
We tried to execute MDM_ADMIN_RETRIEVE_ALL_REPS with
1) MDM Connection which we created in the above configuration steps.(i.e..,MDMTECH_554_700)
We are getting like "Error in repository configuration: MDMTECH_554_700 not found"
Please help us.

You actually named your logical object name, MDMTECH_554_700? The logical object name that the function module is looking for is actually the key name that you supplied in transaction MDMAPIC when you setup your MDM Repository.
Also to use MDM_ADMIN_RETRIEVE_ALL_REPS, you also want to supply the DBMS information as well since you want cross repository information.
Actually the function module that I use to test MDM API ABAP connections is MDM_ADMIN_RETRIEVE_USERS. It has a simplier interface, in that you only have to specify the logical object name.
If you have any problems determining what the logical object name refers to, feel free to send me an email (it is in my SDN business card and also not too difficult to figure out standard SAP addresses). If you email me some screen shots of you configuration in MDMAPIC, I can tell you what value you should be using.

Program _____.MDS not registered..PI 7.1 EHP 1-MDM 7.1 Integration-ABAP API

Hi,
I am on the way of integrating ABAP API in PI 7.1 EHP 1 with MDM 7.1
I installed MDM ABAP API in PI system.
In transaction MDMAPIC, created MDM Server Connection with default port, DBMS Hosts and MDM Repository.
After I did the above tasks, I tested the RFC Connection, But its failed with the following error.
Connection Test MDM_API_GEN_DEFIANCEDEP
Connection Type TCP/IP Connection
Logon     Connection Error
Error Details     Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=67
Error Details     ERROR: program DEFIANCEDEP.MDS not registered
Error Details     LOCATION: SAP-Gateway on host DEFIANCEDPI / sapgw00
Error Details     DETAIL: TP DEFIANCEDEP.MDS not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 87
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1714
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 711
Error Details     TIME: Sat Mar 12 13:53:55 2011
Error Details     VERSION: 2
Appreciated if replied with the proper resolution at the earliest.
Thanks in Advance
Pradeep Shetty

Hi Kanstantsin Chernichenka,
Thanks for your reply.
I tried the given suggestion. And even restarted the PI and MDM system.
Still, I am facing the same problem.
My allow.ip file contains
122.183.187.24;
122.183.187.25;
115.242.211.112;
115.184.2.47;
My MDS.ini file contents are
[MDM Server]
XCS Ini Version=1
Accelerator Dir=E:\usr\sap\MDM\MDS02\mdm\accelerators
Log Dir=E:\usr\sap\MDM\MDS02\log
Report Dir=E:\usr\sap\MDM\MDS02\mdm\reports
Archive Dir=E:\usr\sap\MDM\MDS02\mdm\archives
Distribution Root Dir=E:\usr\sap\MDM\MDS02\mdm\distributions
Transport Dir=E:\usr\sap\MDM\MDS02\mdm\transport
Modifications Dir=E:\usr\sap\MDM\MDS02\mdm\modifications
Lexicon Dir=E:\usr\sap\MDM\MDS02\exe\Lexicons\
Extra DBConnection Validation=True
Log SQL Errors=True
String Resource Dir=E:\usr\sap\MDM\MDS02\exe\LangStrings\
Stemmer Install Dir=E:\usr\sap\MDM\MDS02\exe
Wily Instrumentation=False
Wily Instrumentation Level Threshold=10
SLD Registration=True
Skip Unchanged Records=False
Autostart=0
MDS Ini Version=1
RELEASE\UseAssert=True
Tracing Level=3
LogViewer Format Logging=False
LogViewer Format Tracing=False
Trusted SAP Systems=DPI
TrustFiles Dir=E:\usr\sap\MDM\MDS02\config
Max Threads Per Operation=Auto
Lock Account After Failed Password Attempts=5
Lock Account Duration=1800
Minimal Password Length=5
Password Expiration Days=90
Password Expiration Warning=7
Disable Read Access To Corrupt Repositories=False
MDS Scone=
Log SQL Modifications=False
Maximum DBMS Bind Count=512
Oracle\Dll=OCI.DLL
Allow Console to Retrieve Files=True
Oracle Tablespace Files=1
Default Interface Language Code=eng
Default Interface Country Code=US
Client Ping Timeout Minutes=0
Inactive Client Timeout Minutes=30
Value Retrieval Threshold=0
Protect Family Nodes With Locked Data=False
Number Of Stemmers Per Language=2
TrexDllPath=
Import Slice Size=2048
Bulk Import Silo=True
Safe Silo Mode=False
Enable Change Stamp Logging=False
Always Verify DBMS Connection Before Executing SQL Statements=False
Disable Read Access To Repositories That Require Restart=False
Family Retrieval Threshold=30000
Enable Client Dictionaries=False
Restricted Url For Client Export=
Index_Page_Margin=10
Default Slice Size=500
Default Slice Wait Time MS=300
Enable Slicing For Non-Bulk Operations=False
Multithreaded Matching=True
SAP RFC Gateways=
[MDM Server\Databases\MDM_1MDMORCL_5_3_4_3]
Port=2345
Login=SYSTEM
Password+=ES066H2NVHDCFSJ206LJ9I995SLBVSA21OMQPM0
Stemmer Language=
Stemmer Variant=
Valid Keyword Chars=abcdefghijklmnopqrstuvwxyz0123456789
Max Large Text Length=250000
Number of Rows Per Fetch=100
Max Initial MB to Retain=4
Max Send Failure MB to Retain=4
Workflow Detailed Report=False
Mail Server=
Mail SMTP Timeout=1
Here I am requesting you to send your valuable feedback at the earliest.
Thanks
Pradeep Shetty

SQL Server Reporting Services Configuration Error(Subscription)

I have just deployed a new project on the server and i can successfully run report from the BI Site; [Server Name]\Reports and no issue there. But when i try to create Subscription for the same report; I am trying File Share and it throws error as given
below. Do i have to configure anything for subscription in the Reporting Services Configuration Tool???
I also have few questions regarding Configuration;
What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
Here is the error I am getting in the log file..
ReportingServicesService!library!b!06/17/2010-09:35:04:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for
more information., AuthzInitializeContextFromSid: Win32 error: 110;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
ReportingServicesService!library!b!06/17/2010-09:35:04:: i INFO: Initializing EnableExecutionLogging to 'True' as specified in Server system properties.
ReportingServicesService!subscription!b!06/17/2010-09:35:04:: Microsoft.ReportingServices.Diagnostics.Utilities.RSException: The report server has encountered a configuration error. See the report server log files for more information. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Authorization.Native.GetAuthzContextForUser(IntPtr userSid)
   at Microsoft.ReportingServices.Authorization.Native.IsAdmin(String userName)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.IsAdmin(String userName, IntPtr userToken)
   at Microsoft.ReportingServices.Authorization.WindowsAuthorization.CheckAccess(String userName, IntPtr userToken, Byte[] secDesc, ReportOperation requiredOperation)
   at Microsoft.ReportingServices.Library.Security.CheckAccess(ItemType catItemType, Byte[] secDesc, ReportOperation rptOper)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameterDefinitionFromCatalog(CatalogItemContext reportContext, String historyID, Boolean forRendering, Guid& reportID, Int32& executionOption, String& savedParametersXml,
ReportSnapshot& compiledDefinition, ReportSnapshot& snapshotData, Guid& linkID, DateTime& historyOrSnapshotDate, Byte[]& secDesc)
   at Microsoft.ReportingServices.Library.RSService._GetReportParameters(ClientRequest session, String report, String historyID, Boolean forRendering, NameValueCollection values, DatasourceCredentialsCollection credentials)
   at Microsoft.ReportingServices.Library.RSService.RenderAsLiveOrSnapshot(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters)
   at Microsoft.ReportingServices.Library.RSService.RenderFirst(CatalogItemContext reportContext, ClientRequest session, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]& secondaryStreamNames)
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.Execute()
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   --- End of inner exception stack trace ---
   at Microsoft.ReportingServices.Diagnostics.CancelablePhaseBase.ExecuteWrapper()
   at Microsoft.ReportingServices.Library.RenderFirstCancelableStep.RenderFirst(RSService rs, CatalogItemContext reportContext, ClientRequest session, JobType type, Warning[]& warnings, ParameterInfoCollection& effectiveParameters, String[]&
secondaryStreamNames)
   at Microsoft.ReportingServices.Library.ReportImpl.Render(String renderFormat, String deviceInfo)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData data)
   at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.Deliver(Notification notification)
I also get following error when I try to create email Subscriptoin
w3wp!processing!6!6/17/2010-09:58:53:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'EU_Database'. ---> System.Data.SqlClient.SqlException: Could not obtain information about Windows NT group/user 'THRY\RPUser',
error code 0x6e.
   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.ImpersonateUser()
   at Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper.Open()
   at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.ReportRuntimeDataSourceNode.OpenConnection(DataSource dataSourceObj, ReportProcessingContext pc)
   --- End of inner exception stack trace ---
Thanks,
RP

Hi RP,
For your first issue "cannpt create subscriptions", after analyzing the error logs, it seems to be caused to the service account for the Reporting Services service does not have proper permissions to invoke the WIN32 API.
The SQL Server Reporting Services invokes the Win32 API to impersonate user's permissions to write files to shared folder or call COM+ components.
In this case, we can change the service account to a account has permissions to invoke the Win32 API to solve the issue. For example, we can change the account to be NetworkService or LocalSystem:
1. Backup the encryption key using Reporting Serivces Configuration Manager.
2. Change the service account using Reporting Serivces Configuration Manager.
3. Restore the encryptiong key using Reporting Serivces Configuration Manager.
For your others questions, please see the following inline reply:
--What account should i use for the Deployed Data Source on the Server? A valid SQL Server Account I assume!!!
The account should be a Windows account or the SQL Server account, that has read permissions in the source data base at least.
--What account should i use for the Execution Account (For Unattended Operations) ? A valid Windows Account? or SQL Server account?
The account must be a Windows user account. For best results, choose an account that has read permissions and network logon permissions to support connections to other computers. It must have read permissions on any external image or data file that you
want to use in a report. Do not specify a local account unless all report data sources and external images are stored on the report server computer. Use the account only for unattended report processing.
--What account should i use for the File Share Subscription (Credentials used to access the file share:)? A Valid Windows Account with permission for that folder?
You are right. It must be a Windows account, which has permissions to access and write files to the shared folder.
For more information, please see:
Configuring the Report Server Service Account:
http://msdn.microsoft.com/en-us/library/ms160340.aspx
Execution Account (Reporting Services Configuration):
http://msdn.microsoft.com/en-us/library/ms181156.aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

Call to WPG_SESSION API Failed. Error-Code:6550

Can someone please help me figure out what I may be doing wrong? Using recent downloaded versions of 8i and 9iAS I cannot access Portal30 using IE5 browser. Please see error below. During portal configuration I specified connect string of oracle:1521:dba1. The connectstring entry of the DAD is dba1. I ran ssodatan. The database is open, listener is listening and SQL*Plus, DBA Studio, Net8 Assistant all connect to dba1 fine. Discussions mention cookies, upgrades, etc., but nothing definitive. Troubleshooting Guide does not reference error 6550. I am at a loss. Any suggestions would be appreciated.
I downloaded and installed 8.1.7 on NT host oracle then downloaded and installed 9iAS on another NT host. Portal Diagnostics are successful, however I get database login failed when attempting to use IE5 browser to access portal at http://oracle/pls/portal30/PORTAL30.home
Here's the diags:
D:\ora9ias\portal30\admin\plsql>set ORACLE_HOME=d:\ora9ias
D:\ora9ias\portal30\admin\plsql>diag -s portal30 -c dba1
Begining Portal Diagnostics
...portal_schema: portal30
...portal_password: *************
...portal_connect_string: dba1
Loading java class for Portal Diagnostics ...
SQL*Plus: Release 8.1.7.0.0 - Production on Wed Jul 25 08:41:58 2001
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
Creating Table 'wwsec_diagnostic$'
Creating Sequence 'wwsec_diagnostic_seq'
Diagnostics Report v 1.01: Oracle Portal v 3.0.9.8.0
As of 25-Jul-2001 08:42:17 Schema Name: PORTAL30 SSO Schema Name: portal30
_sso
Proxy Server Settings:
HTTP Server:
HTTP Server Port:
No Proxy Servers for Domains beginning with:
URL Connection Time-Out (seconds):
PORTAL30.wwsec_enabler_config_info$
Login Server URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_app_admi
n.ls_login
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : dba1
Authentication mode : Single Sign-On
Partner Application Information
**** The Login Server (portal30_sso) ****
Home URL : http://oracle/pls/portal30_sso/portal30_sso.home
Success URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_home.pro
cess_signon
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : dba1
Authentication mode : Single Sign-On
**** Oracle Portal (portal30) ****
Home URL : http://oracle/pls/portal30/portal30.home
Success URL : http://oracle/pls/portal30/portal30.wwsec_app_priv.process
_signon
DAD : portal30
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30
Connect string : dba1
Authentication mode : Single Sign-On
**** The Login Server (portal30_sso) ****
Home URL : http://oracle/pls/portal30_sso/portal30_sso.home
Success URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_home.pro
cess_signon
DAD : portal30_sso
Host connection : successful.
mod_plsql : working.
JServ : working.
Schema name : portal30_sso
Connect string : dba1
Authentication mode : Single Sign-On
Diagnostics completed successfully!
Disconnected from Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
D:\ora9ias\portal30\ admin\plsql>
Call to WPG_SESSION API Failed.
Error-Code:6550
Error TimeStamp:Wed, 25 Jul 2001 12:33:52 GMT
Database Log In Failed
TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
null

I met that error several times. Check TNS connection from web server box to database server, if applicable. - use tnsping.
That's the only cause that produces the error. If the web server box has more than one Oracle Home, find the correct one. Check $iAS_home/Apache/bin/apachectl script which will tell you its oracle home directory. It may not use $TNS_ADMIN/tnsnames.ora, but $ORACLE_HOME/network/admin/tnsnames.ora.

Configurator Error- Warning while booking the Sales Order

Hello All,
I am working on Order Management. When i try to book the order using (wf pkg) some times it is throwing an error saying "Configurator error" But when i open the configurator its not a Error message, its jsut a Warning. So, i have to manually click on the CONFIGURATOR, clicking on PREVIEW Configurator, and FINISH Button each time.
Is there any API which can ignore this warning and proceed with Booking the order automatically. (Unless there is an Error, not the warning)
It would be really helpful for me, as i am doing this manually, almost 100 Orders daily.
Thank you,
Aush

You are probably getting the error because the order selections were not valid and therefore you could not book the order.
When you open the configurator and click finish, it may APPEAR that you did not do anything. But in reality, when you click Finish, your selections are changing. Some of the selections are done automatically by rules so some of your incorrect selections are getting fixed by simply opening the configurator and clicking on Finish.
You can verify that by opening the configurator but instead of Finish, click on Cancel. And then try to book the order. You will probably get an error because you did not let the auto-rules fix the errors in your order.
If you want to avoid doing this 100 times a day, you need to look at the process that is creating the order lines in ENTERED state. Your problem is somewhere there.
Hope this helps,
Sandeep GAndhi

'Conversion configuration error: Unknown structure

Hi, my scenario is very simple, Proxy->PI->File and there is no mapping.
There is a report that sends all the data to PI with the proxy and that works OK, but when the file adapter must generate the file I get the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'n:WU_MT_BP' found in document', probably configuration error in file adapter (XML parser error)'
The XML can't be wrong because the MT of the proxy service interface is the same that the MT of the file interface.
In the file content conversion I specified all the structures, with fieldFixedLenghts parameter and endSeparator = 'nl'... I checked those parameters too and they look OK too...

>>Unknown structure 'n:WU_MT_BP
This looks clearly like a content conversion issue.
In file content conversion for recordset structure,have you specified WU_MT_BP?
Is this tag required or it shouldn't be coming in payload in first place.
It is possible that the occurrence of this tag is optional and you may be specified/not-specified content conversion parameters for it.
Thanks
Aamir

MDM ABAP API - Language information not valid for repository

Dear all,
We're programming an interface in SAP R/3 to MDM catalog through 'MDM ABAP API's'. Automatically, it creates an RFC connection to MMD, but we're getting the following connection errorwhen executing the API:
E MDM_ABAP_API 078 Language information ENG US USA not valid for MDM repository XXXYYYZZZ*.
*where XXXYYYZZZ is the repository name.
W'e've established the connection in R/3 through transaction MDMAPIC and we've created the same user in R/3 and MDM Console.
This is the code written on the program where we are defining the language (ENG), country (US) and region (USA).
*maintain logon language information
ls_repository_language-language = 'ENG'.
ls_repository_language-country = 'US'.
**no region information needed here
ls_repository_language-region = 'USA'.
How can I see the repository language definition?
Which are the correct codes to be used for language 'English', Country 'United States' and Region 'USA'? And for other countries, like spanish language, country Spain and Region ¿spain?
In fact, we copied this code from website:
http://help.sap.com/saphelp_nwmdm71/helpdata/en/44/93ad8931381053e10000000a422035/frameset.htm
Maybe the problem is that any RFC configuration is missing, and it has to be done in transaction SM59?
Thanks for your feecback,
Carlos Santamaría.

The problem is now solved.
The correct languague information codes for Language Spanish, Country Spain and Region, are as follows:
Language: 'spa'
Country: 'ES'
Region: '___'
It is important to respect the CAPS, otherwise it doesn't work.
Regards,
Carlos Santamaría.

ABAP API--Server return code 0xFFAA2011:

Hello SDN,
I was stuck with new issue regarding ABAP API. I am trying to update the attribute value through ABAP API, but it is giving me the error "Server return code 0xFFAA2011: RC_CM_RECORDS_LINKED_TO_DOMAINVALUE".
we are using the class for APIs CL_MDM_PROVIDER_55_SP06_PL05. MDM version is 5.5 and patch 5.
Please help me out from this issue. I am getting this error.
api that I am using was
"UPDATE_ATTRIBUT".
Waiting for your valuable response.
Regard

done. This API is working from MDM7 version, not available in MDM5

ABAP API'S - CONFIGURATION ERROR

Similar Messages

Maybe you are looking for