ABAP Classes and BADIs for HR
Hi all,
Can anyone give me a list of classes SAP has released for HR use by customers and all utility ABAP classes. Also any utility abap classes that would be useful for future. I am only interested in those relevant for ECC 5 and up.
Could you supply the BADIs or Enhancement Spots for HR too.
Thanks
Wayne
The BADI's I have found most useful are the BADI exits that duplicate the existing PA30 PAI / PBO User exits. If you trace back to where the exits are called you will find the BADI call within a few lines of code - but the difference is that the BADI is called outside one layer of IF logic, so it gets called in some circumstances where the user exits do not - I think this was to do with certain change or copy data situations.
Can't remember the name of the BADI, and do not have a system available to check at present, but it was not hard to find when I looked in the system.
Others I have used are as exits in the HR to FI posting interface, and also some in the travel to vendor interface. There is also an exit for customising the PERNR search help - cannot remember if this was a class or a FM.
For moving data inside the user exits in a unicode compliant way there are classes for moving data from the flat PRELP character structure to individual infotype structures - CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN and CL_HR_PNNNN_TYPE_CAST=>PNNNN_TO_PRELP.
For general unicode compliant constants such as a Tab character there is class CL_ABAP_CHAR_UTILITIES with attributes like CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
Also if you go to SE38, select the Blue "Online Help" button, and then go to the ABAP Overview, you will find under the ABAP by Theme branch an entry "ABAP System Classes and Interfaces" which documents 20+ general ABAP classes
Hope this helps
Andrew
Similar Messages
-
Information on ABAP Classes and BADI's
Hi All,
I am looking for good starting material to learn 'Advanced ABAP Programming' like Classes,methods and BADI..etc.
1) Any "How to.." material availble?
2) Any recorded sessions avaible?
3) Any suggestions from your side breifly?
I have got comfortable experience in reports,BDCs and transaction like basic stuff..
thanks for your time.
Regards,
Hari
Message was edited by: Hari KiranHi Hari,
There are some nice tutorials and introductory articles and presentations in SDN.
If you do a media search on ABAP Objects you will find:
1)Eight Reasons Why Every ABAP Developer Should Give ABAP Objects a Second Look by Horst Keller
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/37c5db90-0201-0010-3a9b-d0a5288f3c15
2) Questions: Why use ABAP Objects
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3e59b790-0201-0010-88aa-bc8a7f95f6fb
3) Why use ABAP Objects Exercise
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3412d190-0201-0010-aaaa-ff5a315ae5fe
4) ABAP Objects for Java Developers:
https://media.sdn.sap.com/public/eclasses/teched04/ABAP151_files/Default.htm#nopreload=1
There is also an excellent class offered by SAP Education called BC401 that describes Objects and BADIs in exruciating detai ;-).
http://www8.sap.com/useducation/curriculum/course.asp?rid=276&cid=60167031
cheers,
Marilyn -
HI
Can anyone give me the link for ABAP Objects and BADI'S.
I would like to have ABAP Objects with Example as well as BADIS.
Please tell me as iam new to those.
Thanks in advanceHi,
ABAP objects have an elaborated list plz mention specific objects u want to know.
These are few of the links which I got through the sdn.sap for the objects like ALV,LSMW,IDOCS, etc..
Start with this.Refer this
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
some more materials.
Go through the following Documents Links & Materials for ABAP Objects
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/09/understandingABAPObjects&
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
FOR BADI'S:
Check this blogs 2 find a BADI:
How to find if we have a BADI in Transaction VB02
Re: BADI for screen enhancement in MM01 transaction
Re: BADI and User exits
How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
When to Use a BAdI?)
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
How to implement a BAdI And How to Use a Filter
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Introducing Business Add-Ins
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
How to implement BAdi in Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Business Add-Ins
http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
BAdI: Customer-Defined Functions in the Formula Builder
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
You can check the links for Step by Step Badi Implemntation
(very helpful self learning docs).
BADI Step by Step Implementation.
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316afbd1
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
ALV using ABAP Classes and Objects
Hi All,
I am trying to print the values in my internal table using ALV, using ABAP classes and objects. Here the title for columns are picked based on the title specified in the data element. I want to set the title of my columns by my own. how to achieve this ?. Please provide me a sample code if possible.
thanks & regards,
Navneeth.KHello Navneeth
The following sample report shows how to build and modify a fieldcatalog (routine <b>BUILD_FIELDCATALOG_KNB1</b>).
*& Report ZUS_SDN_ALVGRID_EVENTS
REPORT zus_sdn_alvgrid_events.
DATA:
gd_okcode TYPE ui_func,
gt_fcat TYPE lvc_t_fcat,
go_docking TYPE REF TO cl_gui_docking_container,
go_grid1 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1.
PARAMETERS:
p_bukrs TYPE bukrs DEFAULT '2000' OBLIGATORY.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
* define local data
DATA:
ls_knb1 TYPE knb1,
ls_col_id TYPE lvc_s_col.
READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row_id-index.
CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
CASE e_column_id-fieldname.
WHEN 'KUNNR'.
SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
WHEN 'ERNAM'.
* SET PARAMETER ID 'USR' FIELD ls_knb1-ernam.
* NOTE: no parameter id available, yet simply show the priciple
CALL TRANSACTION 'SU01' AND SKIP FIRST SCREEN.
WHEN OTHERS.
* do nothing
ENDCASE.
* Set active cell to field BUKRS otherwise the focus is still on
* field KUNNR which will always raise event HOTSPOT_CLICK
ls_col_id-fieldname = 'BUKRS'.
CALL METHOD go_grid1->set_current_cell_via_id
EXPORTING
is_row_id = e_row_id
is_column_id = ls_col_id.
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = p_bukrs.
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_docking
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR go_grid1.
* Build fieldcatalog and set hotspot for field KUNNR
PERFORM build_fieldcatalog_knb1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
CHANGING
it_outtab = gt_knb1
it_fieldcatalog = gt_fcat
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form BUILD_FIELDCATALOG_KNB1
* text
* --> p1 text
* <-- p2 text
FORM build_fieldcatalog_knb1 .
* define local data
DATA:
ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
* I_BUFFER_ACTIVE =
i_structure_name = 'KNB1'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_BYPASSING_BUFFER =
* I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT gt_fcat INTO ls_fcat
WHERE ( fieldname = 'KUNNR' OR
fieldname = 'ERNAM' ).
ls_fcat-hotspot = abap_true.
ls_fcat-scrtext_s = '<short text>'. " short text of column
ls_fcat-scrtext_m = '<medium text>'. " medium text of column
ls_fcat-scrtext_l = '<long text>'. " longtext text of column
ls_fcat-tooltip = '...'. " ALV control: Tool tip for column header
ls_fcat-coltext = '...'. " ALV control: Column heading
MODIFY gt_fcat FROM ls_fcat.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG_KNB1
Regards
Uwe -
FM/Class to find the class and characterstics for a given material
Hi All,
Is there any Class/FM to find the class and characterstics for a given material.I tried some BAPI_OBJCL* BAPI's but lot of the BAPI's need classnum as input parameter. But i need a BAPI or tables or class which can give the class and its characterstic values for a given material.Hi Ben
Try ..
BAPI_OBJCL_GETCLASSES
BAPI_OBJCL_CREATE -
FBL3N/FBL5N/FAGLL03 user exits and badis for authorization
Hi Gurus,
I have tried userexit and badis for FBL3N , FBL5N and FAGLL03 for the purpose of user want to display documents created by him and other users documents should not display . Please suggest me any user exit or badi and logic for the same.
Moderator message: last warning, if you continue to disregard moderator messages and post the same question nevertheless, I will initiate deletion of your user ID.
Edited by: Thomas Zloch on May 10, 2011 9:57 AMHi,
1. Execute report FBL3n and in the output goto menu SETTINGS -> SPECIAL FIELDS and add the entry BKPF-USNAM and save. Now the user who have created the entry will be available in your FBL*N report.
2. Goto BTE event 00001650 - SAMPLE_INTERFACE_00001650, and copy the FM SAMPLE_INTERFACE_00001650 to custom FM. Inside this custom FM, first pass the value of I_POSTAB to E_POSTAB. i.e
E_POSTAB[] = I_POSTAB[].
Now loop E_POSTAB and check whether E_POSTAB-USNAM NE SY-UNAME, then delete that entry from the internal table E_POSTAB.
3. Now create a custom product in FIBF transaction and check the activate checkbox. Attach the event 00001650 and custom FM to the P/S module customer part.
Hope this will meet your requirement.
Regards,
Harish
Moderator message: please be more selective when replying to questions (especially the "do my work" kind), better check the posters history before investing effort.
Edited by: Thomas Zloch on May 10, 2011 9:59 AM -
User Exit and BADI for Sales Order
Dear Experts,
please give me available user exits and BADI for sales order .i want to take the data from sales order at the time of sales order posting .Hi,
In debugging you can find some Enhancement Spots where you can implement your code. This lets you ignore the need for access key, but its a time consuming process spotting out the exact enhancement point.
Regards
Karthik D -
ABAP class or function for retrieving BEx query properties at runtime
Hello Experts,
I'm working on BADI RSR_OLAP_BADI and for a special calculation I need to know which characteristics are in the drill-down of the BEX query, sol later on I can aggregate some key figures using only these characteristics.
Problem is that structure C_s_DATA in method COMPUTE contains all fields of the query (filters, free chars, chars in the rows, etc) and I need to now which characteristics are currently being showing in the Bex analyzer.
So is there an ABAP class or function module I can use to find out this kind of information at run time?
Any suggestion?
Thank youTank you for the feedback,
I tried to use the class you provided, but I'm stuck now in how to get from within my class that implements RSR_OLAP_BADI interface, a handle, reference, o whatever represent my runtime query (not the query at design time) . As the class you provide must be instantiated before I can use
In pseudo code could be something like this
DATA my_query type query_ref.
my_query = get_rt_query().
my_query->get_state()
regards -
Can I use classes and methods for a maintenance view events?
Hello experts,
Instead of perform/form, can I instead use classes and methods, etc for a given maintenance view event, lets say for example I want to use event '01' which is before saving records in the database. Help would be greatly appreciated. Thanks a lot guys!Hi viraylab,
1. The architecture provided by maintenance view
for using EVENTS and our own code inside it -
It is provided using FORM/PERFORM
concept only.
2. At this stage,we cannot use classes.
3. However, inside the FORM routine,
we can write what ever we want.
We can aswell use any abap code, including
classes and methods.
(But this classes and methods won't have any
effect on the EVENT provided by maintenance view)
regards,
amit m. -
File to Proxy Scenario using ABAP Class and DB Multi Connect
Hello Friends,
I have a scenario below and a proposed solution. I would like some input as to whether i am headed the right way.
Scenario: Thousands of records come in from the legacy accounting system. The fields of these records need to be mapped to SAP fields using cross-reference tables stored in DB2. Finally, summarize the records by deleting a few fields and feed to R/3.
Solution i proposed:
(1) File Adapter is used to send the file
(2) Although JDBC adapter comes first to mind but since i need to access the DB2 tables multiple times for each record i propose to use an ABAP class for the mapping. Within the ABAP class the intent is to open an database connection to DB2, read the relevant cross tables using native SQL and finally generate the output XML.
(3) Reciever is Proxy which feeds this generated XML to SAP for creating posting via BAPI_ACC_DOCUMENT_POST
Question: Is the above solution correct or is there a better method to implement this scenario?
Please let me know.
Thanks,
Minhaj.Looks fine. Few observations -
1. Whether it is ABAP class or Mapping in RFC lookup, you are making multiple trips to the database.
2. It looks like PI is being used only for reading the file and converting it to XML.
3. If using PI is not mandatory, then a complete ABAP class on ECC it self would be faster than swtching between PI Java, PI ABAP then round trips to DB2 finally data push to ECC.
If you could look at something like fetching all the required RFC look up data in one go and then map the fields according, might save u on processor and network resources.
VJ -
Replace Abap-class by Java for Error
hi,
i tried what was said in Michal tutorial :
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
but i faced some problems, first of all i dont have Abap-class in the settings of my Interface mapping i just only have java , XSL and also MM it s weird but anyway could i replace the Abap-class that read the dynamic configuration with a java-class mapiing that could write in the error tag of the soap header.
i followed the steps described in the tutorial i mean the code in the UDF but i cant use the Abap-class mapping in my interafce mapping is there any other way to write in the Error tag of soap header in the SXMB_moni
thanxHey
You need to add a parameter to exchange profile before you can see ABAP-class in Interface mapping,please follow the below steps:
Go to http://<host:port>/exchangeProfile in internet explorer
Expand IntegrationBuilder ->IntegrationBuilder.Repository->click on com.sap.aii.repository.mapping.additionaltypes link ,then on right hand side just type
R3_ABAP|Abap-class in i/o field. and save.
You may need to restart Java engine for this take effect.
Thanks
Aamir
Edited by: Aamir Suhail on Aug 5, 2009 1:02 PM
Edited by: Aamir Suhail on Aug 5, 2009 1:02 PM -
Deleted standard class and BAdI. Need to re-generate/re-import.
Hello SAPients,
My buddy was working on the implementation of a BAdI. He arrived to a point where he couldn't save the Implementation because the system showed the error "Interface doesn't exist". He thought that deleting the implementation and re-creating it he would be able to save the implementation but then the system requested for an Access Key to modify the object, he requested the Key to the Basis guys, they provided it and my buddy deleted the implementation (that's what he thought). Actually, something weird happened and he deleted the class and the BAdI. Now, we are having trouble with short dumps in standard TCodes. The question is, is it posible to re-generate/re-import this standard objects? How?
Thanks in advance for your kind help.I already told him that.
BAdI: FTR_CUSTOMER_EXTENT.
Class: CL_EX_FTR_CUSTOMER_EXTENT.
We have too many developers working on this system, if we restore it from a backup we'll lose their work.
Any other idea?
Thanks. -
How we can use class and methods for the FM of reuse_alv_list_display
Hi Abapers,
Please provide the sample code of class and method of REUSE_ALV_LIST_DISPLAY.
Which Class i can use for this Function module.
I need to write a code using OOPS concept.
I was done the GRID display using this class cl_gui_alv_grid.
But i want only List Display using the class & methods.
Plz provide sample code.
Thanks
Nani.Hi Nani,
This is the sample code..
*& Report Z_OO_ALV
*& We can Use Two containers in OOALV
REPORT z_oo_alv LINE-COUNT 50.
*types gt_struct type sflight.
DATA BEGIN OF gt_struct.
INCLUDE STRUCTURE sflight.
DATA rcol(4) TYPE c.
DATA colors TYPE lvc_t_scol.
DATA END OF gt_struct.
*ALV GRIDs
DATA gr_alvgrid TYPE REF TO cl_gui_alv_grid.
DATA gr_alvgrid1 TYPE REF TO cl_gui_alv_grid.
DATA gc_custom_control_name TYPE scrfname VALUE 'CC_ALV'.
DATA gc_custom_control_name1 TYPE scrfname VALUE 'CC_ALV1'.
*CONTAINERs
DATA gr_ccontainer TYPE REF TO cl_gui_custom_container.
DATA gr_ccontainer1 TYPE REF TO cl_gui_custom_container.
*FIELDCATALOGs
DATA gt_fieldcat TYPE lvc_t_fcat WITH HEADER LINE.
DATA gt_fieldcat1 TYPE lvc_t_fcat WITH HEADER LINE.
*LAYOUTs
DATA gs_layout TYPE lvc_s_layo.
DATA gs_layout1 TYPE lvc_s_layo.
DATA pt_exclude TYPE ui_functions. "internal table declaration to be passed.
*DATA pt_cell TYPE lvc_t_cell with header line.
DATA : gt_list LIKE gt_struct OCCURS 50 WITH HEADER LINE,
gt_list1 LIKE gt_struct OCCURS 50 WITH HEADER LINE.
*DATA v_ucomm TYPE sy-ucomm.
CALL SCREEN 100.
*& Module display_alv OUTPUT
text
MODULE display_alv OUTPUT.
PERFORM display_alv.
ENDMODULE. " display_alv OUTPUT
*& Module PAI INPUT
text
MODULE pai INPUT.
CASE sy-ucomm.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN 'PICK'.
PERFORM cell_info.
ENDCASE.
ENDMODULE. " PAI INPUT
*& Form display_alv
text
FORM display_alv.
PERFORM prepare_field_catalog CHANGING gt_fieldcat[].
PERFORM prepare_layout CHANGING gs_layout.
PERFORM data_retrival.
IF gr_alvgrid IS INITIAL.
CREATE OBJECT gr_ccontainer
EXPORTING
container_name = gc_custom_control_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT gr_alvgrid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM exclude_tb_functions CHANGING pt_exclude.
PERFORM set_col.
CALL METHOD gr_alvgrid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
it_toolbar_excluding = pt_exclude "excluding toolbar functions
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = gt_list[]
it_fieldcatalog = gt_fieldcat[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
PERFORM prepare_field_catalog1 CHANGING gt_fieldcat1[].
PERFORM prepare_layout1 CHANGING gs_layout1.
PERFORM data_retrival1.
IF gr_alvgrid1 IS INITIAL.
CREATE OBJECT gr_ccontainer1
EXPORTING
container_name = gc_custom_control_name1
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
ENDIF.
CREATE OBJECT gr_alvgrid1
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = gr_ccontainer1
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
I_FCAT_COMPLETE = SPACE
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_col1.
CALL METHOD gr_alvgrid1->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout1
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = gt_list1[]
it_fieldcatalog = gt_fieldcat1[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ELSE.
CALL METHOD gr_alvgrid1->refresh_table_display
EXPORTING
IS_STABLE =
I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDFORM. "display_alv
*& Form prepare_field_catalog
text
-->GT_FIELDCAT text
FORM prepare_field_catalog CHANGING pgt_fieldcat TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-fieldname = 'CARRID'.
ls_fieldcat-scrtext_m = 'Air line code'.
ls_fieldcat-col_pos = 0.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO pgt_fieldcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'CONNID'.
ls_fieldcat-scrtext_m = 'Connection code'.
ls_fieldcat-emphasize = 'C900'.
APPEND ls_fieldcat TO pgt_fieldcat.
ls_fieldcat-tabname = 'gt_list'.
ls_fieldcat-fieldname = 'PRICE'.
ls_fieldcat-scrtext_m = 'PRICE'.
APPEND ls_fieldcat TO pgt_fieldcat.
ENDFORM. "prepare_field_catalog
*& Form prepare_layout
text
-->GS_LAYOUT text
FORM prepare_layout CHANGING gs_layout TYPE lvc_s_layo.
gs_layout-stylefname = 'FIELD_STYLE'.
gs_layout-zebra = 'X'.
gs_layout-grid_title = 'FLIGHT'.
gs_layout-sel_mode = 'A'.
gs_layout-ctab_fname = 'COLORS'.
ENDFORM. "prepare_layout
*& Form data_retrival
text
FORM data_retrival.
SELECT carrid
connid
price
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE gt_list
UP TO 50 ROWS.
ENDFORM. "data_retrival
FORM EXIT_PROGRAM *
FORM exit_program.
CALL METHOD gr_ccontainer->free.
CALL METHOD gr_ccontainer1->free.
LEAVE TO SCREEN 0.
ENDFORM. "exit_program
*& Module STATUS_0100 OUTPUT
text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STAT'.
SET TITLEBAR 'xxx'.
IF W_CUSTOM_CONTAINER IS INITIAL.
**sets TITLEBAR
PERFORM TITLEBAR.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form prepare_field_catalog1
text
-->GT_FIELDCAT text
FORM prepare_field_catalog1 CHANGING pgt_fieldcat1 TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'gt_list1'.
ls_fieldcat-fieldname = 'SEATSMAX'.
ls_fieldcat-scrtext_m = 'MAX. SEATS'.
ls_fieldcat-col_pos = 0.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = ' '.
APPEND ls_fieldcat TO pgt_fieldcat1.
ls_fieldcat-tabname = 'gt_list1'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'SEATSOCC'.
ls_fieldcat-scrtext_m = 'SEATS OCCUPIED'.
APPEND ls_fieldcat TO pgt_fieldcat1.
ENDFORM. "prepare_field_catalog
*& Form prepare_layout1
text
-->GS_LAYOUT text
FORM prepare_layout1 CHANGING gs_layout1 TYPE lvc_s_layo.
gs_layout1-stylefname = 'FIELD_STYLE'.
gs_layout1-zebra = 'X'.
gs_layout1-grid_title = 'DETAILS'.
gs_layout-sel_mode = 'C'.
gs_layout1-info_fname = 'RCOL'.
gs_layout-no_toolbar = 'X'.
ENDFORM. "prepare_layout
*& Form data_retrival1
text
FORM data_retrival1.
SELECT seatsmax
seatsocc
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE gt_list1
UP TO 50 ROWS.
ENDFORM. "data_retrival
*& Form exclude_tb_functions
&---- subroutine to exclude toolbar options -
text
-->PT_EXCLUDE text
FORM exclude_tb_functions CHANGING pt_exclude TYPE ui_functions.
DATA ls_exclude TYPE ui_func.
ls_exclude = cl_gui_alv_grid=>mc_fc_maximum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_minimum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_subtot.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_sort.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_fc_sum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_subtot.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_sum.
APPEND ls_exclude TO pt_exclude.
ls_exclude = cl_gui_alv_grid=>mc_mb_filter.
APPEND ls_exclude TO pt_exclude.
ENDFORM. "data_retrival1
*& Form cell_info
text
FORM cell_info. "CHANGING pt_cell TYPE lvc_t_cell.
DATA lt_cell TYPE lvc_t_cell WITH HEADER LINE.
CALL METHOD gr_alvgrid->get_selected_cells
IMPORTING
et_cell = lt_cell[].
LOOP AT lt_cell.
WRITE : lt_cell-col_id , lt_cell-row_id.
ENDLOOP.
MODIFY pt_cell[] from lt_cell[].
ENDFORM. "cell_info
*& Form set_col
text
FORM set_col .
DATA ls_cellcolor TYPE lvc_s_scol.
LOOP AT gt_list.
IF gt_list-price GT 500.
ls_cellcolor-fname = 'PRICE'.
ls_cellcolor-color-col = 5.
ls_cellcolor-color-int = 1.
ls_cellcolor-color-inv = 0.
APPEND ls_cellcolor TO gt_list-colors.
else.
ls_cellcolor-fname = 'PRICE'.
ls_cellcolor-color-col = 3.
ls_cellcolor-color-int = 1.
APPEND ls_cellcolor TO gt_list-colors.
ENDIF.
MODIFY gt_list.
ENDLOOP.
ENDFORM. "set_col
*& Form set_col1
text
FORM set_col1.
data : ind type sy-tabix,
indx type sy-tabix.
loop at gt_list1.
ind = sy-tabix / 2.
indx = sy-tabix - ind.
if indx eq ind.
gt_list1-rcol = 'C500'.
endif.
MODIFY gt_list1.
endloop.
ENDFORM. "set_col
*FORM TITLEBAR.
*SET TITLEBAR 'TITLE'.
*ENDFORM.
*double click on TITLE and write ur title
Thanks,
Samantak.
Rewards points for useful answers. -
Project settlement to CO-PA and BAdI for automatic creation of rules
Hello SAP experts!
I have managed to implement settlement rule strategy to CO-PA for sales project WBS-elements, which automatically creates the settlement rules for WBS-elements with billing indicator. One or more sales order items are assigned to the WBS-elements. When the system derives settlement rules, it generates profitability segments that contain the characteristic values of the WBS elements and the sales orders assigned to them. The problem is, that only one single settlement receiver is determined for each WBS-element. And if more that one sales order item is assigned to the same WBS-element only those characteristics are copied to the settlement rule that are same in all sales order items.
For example; it products are different in all sales order items, the automatically created settlement rule does not contain the characteristic value product or neighter other caracteristics derived from product.
Do You have experience of using BAdI for influencing the generation of settlement rules? What it actually makes possible?
Br, NinaDear Waman,
thank you for your reply !
Yet - this still does not solve our problem. In that note (and also in the related note 201445) there is no valuable information included concerning transaction currency:
Our WBS elements (and also other cost objects, e.g. sales order items) are being debited in all of the three currencies.....but the credit (during settlement) only takes place in two of them: object and CO area currency.
I really appreciate additional help on this. It would be hard to believe that we are the only SAP customer having this kind of problem.
Best regards,
Thomas -
Can I create a class and package for my inframe AS and access it global
Ls,
I made an app using only inframe actionscript in a .fla;
transfrerring variables from frame 1 to frame 2 is unreliable.
Some sources say the persist over frames but i found that not to be reliable.
Arrays seem to be filled with the right values. Normal int vars declared in frame 1 fail some time.
You should have used classes i hear you say, and right you are.
But I didnt.
Now im using either reloading, re-initing and/or the sharedobject.
Anyhoe..
Question:
If I declare a class for my main .fla file.,
then declare, instantiate and load the globals i want in this main class,
will I be able to acces these variables in my main .fla timeline script?
If so, I could slowely reconstruct my .fla into smaller objects/classes and make it a real app.
Just starting from scratch is. welll..i dont even want to think about that.
Highest regards,
MacYes! I got it to run as Mobile project.
Now, how to test on my mobile thru USB.
I'm more/only used to working from FLASH CS5.5
Although I like the builder, it feels really flexible, it also seems more work(yeah still lazy).
Is there an advantage to using the builder over Flash CS?
Thank you.. again...again
Mac
Maybe you are looking for
-
HT202360 Why does email forwarding not work with external addresses?
I have tried to setup an internal email account which is meant to forward emails to an external account. Under the account's mail options i have set "Mail should be: " to Forwarded and typed in the email address underneath. However, both with an exte
-
HTTP tunneling is disabled in weblogic 9.2
I have restarted my weblogic server on last saturday, after that i am getting the following exception continuously. ####<Jun 5, 2010 11:27:44 PM MEST> <Info> <ServletContext-/bea_wls_internal> <aberdeen> <IAEABEADMP> <[ACTIVE] ExecuteThread: '1' for
-
Best practice migrate file server
I have 3 file servers n two different domains: FileS01 and FileS02 in domainA (FileS01 / FileS02: Windows 2003R2) FilesS03 in domainB (FileS03: Windows 2003R2) Should I migrate to a new corporate server to be FileS01 (Windows 2012) also call and be i
-
Query regarding screen designing
Hi Experts, I am designing a page using sap webdynpro java in which page header should contain 5 buttons as follows. Home Porders Corders Inventory GReciepts By clicking GReciepts i should get 4 buttons As follows. OFSummery GReciept
-
Image and label location in JButton
I have a class MyButton that extends JButton. I'm trying to override the contains(int x, int y) method of MyButton in such a way so as to return true if and only if the point x,y is contained within either the button's image or the button's label. So