ABAP: create Popup for Input in selection Table for longer strings

Hello,
I am new in ABAP programming.
I have created an application with SE38, in this application I call a table from an selection-screen. I pass a variable which I got from the selection-screen and call data from an InfoProvider that I have created.
Now in this table the user has to enter some data into certain fields.
There is a character field with a length of 60. This is not enough.
I know that it is possible to have an InfoObject with attributes and split a string into the attributes to transport string with a longer length than 60.
But my inputfield in the table doesn't give me the possiblity to enter data that is longer.
So I am asking here if it is possible to access that field and call an inputfield somehow?
I need an inputfield where I can enter data that is longer than 60 characters (maybe about 600) and after submitting it has to be splittet into several hidden fields. After saving of the table I will call a process-chain which will transfer the data from the table back into the InfoProvider.
If you need any more informations about my application please let me know, I don't know if my question is clear enough..
Regards
Martin

You posted at wrong forum. please repost your issue at below forum.
ABAP Development

Similar Messages

How to create DB partitioning in active data tables for ods?

hi all,
Can anyone let me know how to create DB partitioning in active data tables for ods. if any docs pls share with me at my email id : [email protected]
regds
haritha

Haritha,
The following steps will briefly explain you to improve the performance in terms of DB partitioning as well as loading. Please find the same,
transaction RSCUSTA2,
oss note 120253 565725 670208
and remove 'bex reporting' setting in ods if that ods not used for reporting.
hope this helps.
565725
Symptom
This note contains recommendations for improving the load performance of ODS objects in Business Information Warehouse Release 3.0B and 3.1 Content.
Other terms
Business Information Warehouse, ODS object, BW, RSCUSTA2, RSADMINA
Solution
To obtain a good load performance for ODS objects, we recommend that you note the following:
1. Activating data in the ODS object
In the Implementation Guide in the BW Customizing, you can implement different settings under Business Information Warehouse -> General BW settings -> Settings for the ODS object that will improve performance when you activate data in the ODS object.
1. Creating SIDs
The creation of SIDs is time-consuming and may be avoided in the following cases:
a) You should not set the indicator for BEx Reporting if you are only using the ODS object as a data store.Otherwise, SIDs are created for all new characteristic values by setting this indicator.
b) If you are using line items (for example, document number, time stamp and so on) as characteristics in the ODS object, you should mark these as 'Attribute only' in the characteristics maintenance.
SIDs are created at the same time if parallel activation is activated (see above).They are then created using the same number of parallel processes as those set for the activation. However:if you specify a server group or a special server in the Customizing, these specifications only apply to activation and not the creation of SIDs.The creation of SIDs runs on the application server on which the batch job is also running.
1. DB partitioning on the table for active data (technical name:
The process of deleting data from the ODS object may be accelerated by partitioning on the database level.Select the characteristic after which you want deletion to occur as a partitioning criterion.For more details on partitioning database tables, see the database documentation (DBMS CD).Partitioning is supported with the following databases:Oracle, DB2/390, Informix.
1. Indexing
Selection criteria should be used for queries on ODS objects.The existing primary index is used if the key fields are specified.As a result, the characteristic that is accessed more frequently should be left justified.If the key fields are only partially specified in the selection criteria (recognizable in the SQL trace), the query runtime may be optimized by creating additional indexes.You can create these secondary indexes in the ODS object maintenance.
1. Loading unique data records
If you only load unique data records (that is, data records with a one-time key combination) into the ODS object, the load performance will improve if you set the 'Unique data record' indicator in the ODS object maintenance.
Hope this helps..
****Assign Points****
Thanks,
Gattu

Select Tables for reduction

Hi ,
in step "Select Tables for Reduction" , each table has to be selected one- by- one for reduction.
Is there any functionality to select more than ONE tables starting with Custom Name Space and mark them for "NO Transfer" ?
Possibly with help of maintenance view, table behind above logic can be used...
any input appreciated...let me know if need more explanation...
thank you !
Regards, Santosh

Hi,
This functionality was developed in order to cater to all 3 requirements i.e.
a. The customer may choose to transfer some tables in full -> There are some tables which cannot be set to Full Transfer. So in order to do this verification, it becomes necessary to run a check on the chosen table when the user selects that table which is only possible on choosing one table at a time.
b. Change the reduction criteria for a table -> Now, here we may have differnet reduction criterias / Selection Groups for a single table. This identification of selection groups too is only possible on a table to table basis.
c. Set a table to No Transfer -> Let us assume a situation where we have parent - child relationship between 2 tables. In case the parent was set to "No Transfer" via a maintainence view, then it would result in no data being transferred for the child table either. This inturn might lead to further inconsistencies. Thus, in order to be on the safe side, we have to do it one table at a time currently.
So keeping in mind all the 3 requirements and to maintain simplicity, this was the approach chosen.
Also, we would also like to inform you that this requirement has been taken up with high priority for the new release of TDMS (i.e. TDMS 4.0 which is scheduled to be released next year) and have already started working on arriving at a solution keeping in mind all the above limitations.
Thanks & Regards,
Suman

Using Pages, I have created a document and inserted a Table for use in logging an inventaory. When I came to print this off however the lines for the table were missing but the text was in the Table format, weird! How do I print the Table?

Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

Using Pages, I have created a document and inserted a Table for use logging an inventory. When I came to print this document the lines and boarders of the Table feature did not print however the text did print in the table format. How do I get the lines and boarders to print also?

Closing INDIVIDUAL lines for input in a table control

Right, hopefully I can explain my issue clearly enough to get an answer that will help me resolve this pain in the *** issue.
My table control has a delete function but the client doesn't want the line removed from the control table they simply want the line in question to be greyed out (closed for input). Has anyone achieved this in the past? I know it's possible to grey out columns but I can't see any way of doing individual lines.
For all answers that help me I will shout a beer provided you are in either Sydney or Adelaide.

Hi,
>
Neil Gardiner wrote:
> Right, hopefully I can explain my issue clearly enough to get an answer that will help me resolve this pain in the *** issue.
>
> My table control has a delete function but the client doesn't want the line removed from the control table they simply want the line in question to be greyed out (closed for input). Has anyone achieved this in the past? I know it's possible to grey out columns but I can't see any way of doing individual lines.
>
> For all answers that help me I will shout a beer provided you are in either Sydney or Adelaide.
Refer:-
it_zekpo is my internal table w/o header line,
wa_zekpo is work area.
Name of input/output fields on screen are:-
wa_zekpo-field1,
wa_zekpo-field2, and so on...
Add a field as flag(1) type c in the internal table and work area
And keep a name of SELCOL in the attributes of table control as wa_zekpo-flag
Take the group1 for all textboxes as 'ABC' in the table control
Try using code:-
At screen logic:
PROCESS BEFORE OUTPUT.
* MODULE status_8003.
LOOP WITH CONTROL po_tb.
    MODULE read_data.
ENDLOOP.
PROCESS AFTER INPUT.
* MODULE user_command_8003.
LOOP WITH CONTROL po_tb.
    MODULE modify_data.
ENDLOOP.
In PBO
*&      Module READ_DATA OUTPUT
MODULE read_data OUTPUT.
READ TABLE it_zekpo INTO wa_zekpo INDEX po_tb-current_line. "po_tab is table control name
data : line_count type i.
describe it_zekpo
lines line_count.
po_tb-lines = line_count + 10.
"to increase the number of lines in table control dynamically
if sy-ucomm = 'DELETE'. "<--when user click delete button
    if wa-zekpo-flag = 'X'. "<--if record selected
      if screen-group1 = 'ABC'.
        loop at screen.
          screen-input = 0. "disable
          screen-active = 0.
        endloop.
        modify screen.
      endif.
    else. "<--if record not selected
      if screen-group1 = 'ABC'.
        loop at screen.
          screen-input = 1. "enable
          screen-active = 1.
        endloop.
        modify screen.
      endif.
    endif.
endif.
ENDMODULE.                 " READ_DATA OUTPUT
In PAI
*&      Module MODIFY_DATA INPUT
MODULE MODIFY_DATA INPUT.
MODIFY IT_ZEKPO FROM WA_ZEKPO INDEX po_tb-currentline.
"this will insert a new line
"and will modify the contents of existing line
ENDMODULE.                 " MODIFY_DATA INPUT
Hope this helps you.
Let mw know if you have any doubts.
Regards,
Tarun

How to Create a Parameterized Report - The select "- ALL-" for department and manager not working.

I downloaded the OEHR Sample Objects application and followed the steps in Oracle® Application Express Advanced Tutorials
Release 3.2.
The parameters and report seem to be working correctly except when I enter "all" for department or manager I get no matching hits.
What's the most efficient way to retrieve "all" if the users selects all for dept and mgr - thus we'd want to return all records in the table.
Region snipprt
Enter Search
Search Employee
Dept
- ALL -
Administration
Marketing
Purchasing
Human Resources
Shipping
IT
Public Relations
Sales
Executive
Finance
Accounting
Treasury
Corporate Tax
Control And Credit
Shareholder Services
Benefits
Manufacturing
Construction
Contracting
Operations
IT Support
NOC
IT Helpdesk
Government Sales
Retail Sales
Recruiting
Payroll
Mgr
- ALL -
Steven King
Neena Kochhar
Lex De Haan
Alexander Hunold
Nancy Greenberg
Den Raphaely
Matthew Weiss
Adam Fripp
Payam Kaufling
Shanta Vollman
Kevin Mourgos
John Russell
Karen Partners
Alberto Errazuriz
Gerald Cambrault
Eleni Zlotkey
Michael Hartstein
Shelley Higgins
The following is the sql that was provided as part of the turitoral.
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
     (lower(first_name) like '%' || lower(:P1_NAME) || '%' OR
      lower(last_name) like '%' || lower(:P1_NAME) || '%')
AND department_id = decode(:P1_DEPT,'%null%',department_id,:P1_DEPT)
AND manager_id = decode(:P1_MGR,'%null%',manager_id,:P1_MGR)

Hi,
Use this..
SELECT
   "OEHR_EMPLOYEES"."EMPLOYEE_ID" "EMPLOYEE_ID",
   "OEHR_EMPLOYEES"."FIRST_NAME" "FIRST_NAME",
   "OEHR_EMPLOYEES"."LAST_NAME" "LAST_NAME",
   "OEHR_EMPLOYEES"."EMAIL" "EMAIL",
   "OEHR_EMPLOYEES"."PHONE_NUMBER" "PHONE_NUMBER",
   "OEHR_EMPLOYEES"."HIRE_DATE" "HIRE_DATE",
   "OEHR_EMPLOYEES"."JOB_ID" "JOB_ID",
   "OEHR_EMPLOYEES"."SALARY" "SALARY",
   "OEHR_EMPLOYEES"."COMMISSION_PCT" "COMMISSION_PCT",
   "OEHR_EMPLOYEES"."MANAGER_ID" "MANAGER_ID",
   "OEHR_EMPLOYEES"."DEPARTMENT_ID" "DEPARTMENT_ID"
FROM
   "#OWNER#"."OEHR_EMPLOYEES" "OEHR_EMPLOYEES"
WHERE
    (:P1_NAME IS NULL OR
        (:P1_NAME IS NOT NULL AND
                (lower(first_name) like '%' || lower(:P1_NAME) || '%') OR
                (lower(last_name) like '%' || lower(:P1_NAME) || '%')
    ) AND
    (:P1_DEPT IS NULL OR department_id = :P1_DEPT) AND
    (:P1_MGR IS NULL OR manager_id = :P1_MGR)

Linkage for RSEG and BSIS tables for tax item

Hi,
How to find corresponding tax line item in BSIS or BSAS table for a RSEG line item.
In case of BSET table I could find the linkage by BSET-TXGRP and RSEG-BUZEI.

The obvious link I can see is on bukrs/belnr/buzei/mwskz fields.
All available in all tables. The company code and accounting document number is normally enough but if there are multiple line items use the buzei fields as well. The tax field on is MWSKZ.
Same on both BSIS/BSAS and RSEG.
BSAS is almost the same table as BSIS but has the clearing items as well.
Message was edited by: Barry Neaves

ITunes opens explorer window when searching for updates or selecting restore for any iOS device.

When trying to check for updates from within iTunes for any device, or trying to restore a device in iTunes I click the update/restore button and iTunes opens an explorer window for me to browse to the .ipsw file. I am unable to get iTunes to check the Apple servers for the restore/update files.
Where is this setting stored either in the registry or the iTunes folder?
I have performed a clean uninstall (http://support.apple.com/kb/HT1923) , have removed my apple preferences that were stored in the AppData folders for each user and have reinstalled and still see the explorer box rather than the check apple for updates dialogue.
I have a feeling that the particular setting is somewhere in either the itunes library folder, in the registry or in another plist file... but where is the question?

Have you had any luck in resolving this issue? Seems Apple are a bit quiet on it...

How can I create a Text-Input Field in BexAnalyzer for a Planning Function

Hello,
i want to create a pre calculation(contribution accounting) for Materials in BI-Integrated Planning. These Materials aren't in the master data. So I create a new Info Object for pre calculated materials with only a material-number as key and a text-description.
Now I want to write a Exit-Function, which creates new materials in these Info Object. The user should start this function in a planning application in BexAnalyzer. There the user should have the possibility to enter a text-description for the new material. How can I create such a Text-Field in BexAnalyzer and how can I read this text filed in a planning function (exit).
Thanks in advance

Hi Jürgen,
you can create a parameter for this in the exit function and a variable for the parameter. In BEx Analyzer then create a button for the planning function; in the button parameterization use VAR_NAME = , i.e. use an Excel formula here to get the value from an Excel input field.
The command range should be some 'hidden area' in your Excel sheet.
But may be you don't need this. Use a characteristic without master data. Then ensure that that the query uses the option 'key' as display. In new lines you can then enter the key, the system creates a SID on the fly (but the text table will not be updated). In this scenario you may take text also from the key. May be you can update the text table (online or in batch) by simply using function modules from function group RSNDI_MD (not released by SAP).
But observere that the system in BI Planning reads only the active version, i.e. if you change something on the fly the changes may not be visible.
Regards,
Gregor

How to create a user in SQL database table for FBA in SharePoint 2013

Hi,
I am trying to configure Form Based Authentication on my SharePoint Dev machine. The purpose is to add an external user to a table (using a registration page).The provider used is SQLMembershipProvider.The dev machine is also configured as domain controller
so all users created locally are AD users.
Reference articles that i checked are
Either adding users to the database as a windows user (i.e. under users section in the database). But on my machine, windows user would be same as adding a AD user.
Or by creating a dedicated IIS site for .Net users (after creating a FBA DB using aspnet_sql tool). Right now i have implemented FBA using this method.
Is it possible to add user details in a table of choice and then access that user using people picker? (without any third party tools).
Thanks,
Thomas

Hi,
We can use CreateUserWizard control to achieve it.
Here is a blog for your reference:
Adding Users With SharePoint Forms Based Authentication
http://psterpe.wordpress.com/2009/05/24/adding-users-with-sharepoint-forms-based-authentication/
Best Regards
Dennis Guo
TechNet Community Support

Create user/schema is script, then tables for that user/schema

Hi;
First off, if I phrase this a little wrong - I'm from the Sql Server world and still trying to totally understand Oracle.
I have a schema (.sql file) that creates my database fine. But what I would liek to add to the .sql schema is for it to create a user and then place all the tables, indexes, sequences, and triggers in as belonging to that created user.
This way we can tell people to log in as sysop and run the script to create the schema rather than create the user, log in as the user, then run the script.
What do I need to add?
thanks - dave

Hi;
I have tried:
CREATE USER DAVE IDENTIFIED BY password;
CONNECT DAVE/password AS SYSDBA
I have also tried:
CONNECT DAVE/password AS SYSTEM
CONNECT DAVE AS SYSDBA
CONNECT DAVE
In all cases ApplicationExpress says it does not recognize the CONNECT command. Should I do something different? What I want to accomplish is that all subsequent commands in the script creating tables, indexes, etc are assigned to the user/schema DAVE.
thanks - dave

How can Select tables for master item

Hello
We have EBS R12
and i have reports builder, i just want to view all master items using reports builder since many tables are in the database
how can check or select exact tables
thanks

If you tried to make a purchase from Apple.com, they offer you the opportunity to add a second credit card if you have one. If you do not have one, then you need to contact the back or institution that handles your credit card for them to approve the purchase.
Just so you know, you are not addressing Apple here, we are users like you.

Poor performance for the 1st select everyday for AFRU table

Hello everyone, I have performance problems with AFRU table. Every day, the first time I run a "Z" transaction, it takes around 100-120 seconds, but the second time and following it only takes four seconds. What could I do, in order to reduce the first execution time?
This is the select:
SELECT * FROM AFRU WHERE MANDT = :A0 AND CATSBELNR = :A1 AND BUDAT = :A2 AND PERNR = :A3 AND STOKZ <> :A4 AND STZHL = :A5
The execution plan for this select takes index AFRU~ZCA with an acceptable cost of 6.319. Index AFRU~ZCA is a nonunique index with these colums: MANDT + CATSBELNR + BUDAT + PERNR
I'll appreciate any ideas.
Thanks in advance,
Santi.

What database system are you using (ASE, Oracle, etc?).
If ASE, for the general issue of the first exection of a query taking longer, the two most likely reasons would be
a) the table's data has aged out of cache so the query has to do a lot of physical i/o to read the data back into cache
or
b) the query plan for the query has aged out of statement cache and needs to be recompiled.
This query looks pretty simple, so the data cache seems much more likely.
To get a better feel, some morning run the query with
set statistics io on
set statistics time on
then run it again and look for differences in the physical vs logical i/o numbers and compile vs execution times.
You could use a scheduled event (Job Scheduler, cron job) to run the query or some query very like it a little earlier in the day to prime the data cache with the table data.

Creating QRY and need Serial Number Table for Field SERNR

I am creating a SQVI Query that will give me all material in stock and their serial number or batch number. I was able to create the batch number by using:
LQUA-WERKS = Plant
LQUA-MATNR = Part Number
LQUA-LGPLA = Storage Bin
LQUA-VERME = Available Stock
LQUA-WDATU = Date of Goods Receipt
LQUA-BDATU = Date of Last Movement
LQUA-LGTYP = Storage Type
LQUA-EDATU = Date of Last Placement into Stock
LQUA-CHARG = Batch Number
OK I would like to add the Serial Number and when I review in lets say lQ01 I can't find the table name for the serial number - just the field name which is SERNR.
Does anyone know of the table name and how I can link to table LQUA?
Thanks,
Linda

Quant and the equipment master do not have direct relationship and if you are not using HUM, there is no connection between quant and the equipment master.
If you are using the euqipment master... There are number of tables that stores the serial number by the different type of assignments. For example, if you are looking for serial number assigned to delivery, you can look in SER01. If you search for table SER*, you will see all of them. These tables have the key field of "OBKNR" which can be used to access the table OBJK to find the equipment number for the serial number.
If not, SERI will give you serial number detail.

How do I create a header in the response table for a column I want to use that is not on the form it

Example: My form has 10 fillable questions. The Response table uses 10 columns to show the answers to those questions. I would like to use 3 more columns to record internal information. How do I insert the header titles?

Hi,
You can go to Responses view tab, focus on your last column header and then click menu Table->Add Column After. Or you click + button at the end of table - refer below image.
I am not clear your question "How do I insert the header titles?" Do you mean you want to use your form title as data value in each cell in the column? If yes, you can set formula in the column following below steps.
1. Click +Add a Row button
2. Focus on the cell on column L (I assume you want to set your formular on this column).
3. Input ="your form title" into the cell
Then after you received a submission, the form title would display in the related cell in each row.
Hope it will help you.
Thanks,
Ying

ABAP: create Popup for Input in selection Table for longer strings

Similar Messages

Maybe you are looking for