ABAP program is cancel , Function ROLLBACK on connection failed

We have an ABAP program (Z), the following program executes this task:
1.-Read table A (about 3 million records)
2.-Read table B (about 6 million records)
3.-Instert in to B table the match between A and B table
When the program run in batch or dialog process, it stops without apparently reason, it don not trace any log in ST22 transaction. When we trace it in SM21 trace the following log:
18:30:23
DIA
004
100
SE38
BZ
Y
Unexpected return value 1 when calling up DbSlR
18:30:23
DIA
004
100
SE38
BY
J
Function ROLLBACK on connection R/3 failed
18:30:24
DIA
004
100
SE38
R3
9
Error in DB rollback/SyFlush, return code 016384
18:30:25
DIA
004
100
SE38
Q0
2
Stop Workproc 4, PID 8583
18:30:47
DIA
004
100
R4
7
Delete session 003 after error 023
The tables and ABAP program are in a BW system in a DB2 v9 database
Some idea?
Best Regards

Hi Malte, I did not find dev_w4, but we found:
dev_rfc4 bwdadm 25.11.2008 18:30:41
stderr1 bwdadm 25.11.2008 18:30:25
The stderr1 file was created on the same time that "Stop Workproc 4" event, at 18:30:25
The stderr1 trace the next log:
(8558) New Child Process created.
(8558) Starting local Command:
Command: dw.sapBWD_DVEBMGS00
pf=/usr/sap/BWD/SYS/profile/BWD_DVEBMGS00_MXMLNBW01
[Thr 1] MtxInit: 30002 0 2
ICM up and operational (pid: 8577)
work process W20 died => ThIRollBack: db_rollback
work process W19 died => ThIRollBack: db_rollback
work process W1 died => ThIRollBack: db_rollback
work process W19 died => ThIRollBack: db_rollback
work process W22 died => ThIRollBack: db_rollback
work process W19 died => ThIRollBack: db_rollback
work process W19 died => ThIRollBack: db_rollback
work process W21 died => ThIRollBack: db_rollback
The issue is. Why the process is aborted?
Best Regards
Edited by: Carlos Orencio on Nov 26, 2008 5:52 PM

Similar Messages

ABAP program is terminated with error Function ROLLBACK on connection R/3

Hi,
We are reading a DB table A and matching with table B and placing into a internal table and further looping at the internal table.
Table A has 3- 5 million records
Table B has 2-4 million records
When the program run in batch or dialog process, it stops without apparently reason, it don not trace any log in ST22 transaction. When we trace it in SM21 trace the following log:
22:18:33 BTC 014 100                BZ Y Unexpected return value 1 when calling up DbSlR
22:18:33 BTC 014 100                BY J Function ROLLBACK on connection R/3 failed
22:18:33 BTC 014 100                R3 9 Error in DB rollback/SyFlush, return code 016384
22:18:33 BTC 014 100                Q0 2 Stop Workproc14, PID 729286
22:18:33 BTC 014 100                F3 T Invalid object name for TemSe object: " "
22:18:33 BTC 014 100                EC F Failed to create log for job BIDTPR_291659_1 22085900%_IMMEDIATE %NEWSTEP/
22:18:33 BTC 014 100                F2 0 Calling program reports invalid handle for TemSe object (magic==X'NULL-ptr'
22:18:33 BTC 014 100                R4 7 Delete session 001 after error 023
The tables and ABAP program are in a BW system.
Any idea what would be the cause. I found a similar problem in the forum but no solution provided there..
Regards
Rob

Hi Rob,
Please check the entries in the work process trace file from this time (dev_wp14 from the work directory)
Error in DB rollback/SyFlush, return code 016384
usually has a preceding entry in the wp log of
SHO: Could not allocate SHO segment of ..... bytes (rc=1)
Usually this is a result of a SELECT statement that returns a very large result set is executed.
While the result set is fetched the ABAP heap is exhausted. Since no
more memory is available the ABAP engine abruptly cancels the execution
and begins error handling. The database interface rejects to execute a
ROLLBACK statement while the SELECT statement is still active. As the
rollback fails the task handler restarts the SAP work process and no
ABAP short dump or job log entries can be written.
The rejected ROLLBACK is a direct result of the lack of ABAP heap memory
and does not represent an error in itself.
The solution here is to increase the memory areas "extended memory" and
/ or "heap". Please check/adjust your SAP memory settings!
As mentioned, Similar issues have been resolved with the note #741864.
The key is that the abap/shared_object_size_MB is too small for the
system and the operation performed, please increase this to 100MB to
start from the default of 20MB and then increase further if the dump
persists as more maybe needed of course. There is no problem increasing
this parameter since you have a 64bit system and SAP kernel.
Similar issues have been resolved with the note #741864 and note #986790
along with the increase in abap/shared_object_size_MB. These notes may
not be necessary just the increase but this issue frequently occurs in
these areas so perhaps they can help.
Hope this helps,
Paul

ABAP program to Cancel messages in Scheduled/Recorded status?

Hi,
Thanks for reading my post...
Can anyone tell me whether there is an ABAP program available (or a variant) that will Cancel messages that are in Scheduled (or Recorded) status?
Messages to be sent from ECC to PI were not sent and are left in Recorded status in ECC. I cannot find the documentation to explain what this status is, but I'm presuming that it's similar to the Scheduled status in PI (though there's not much documentation about that either - for example, what's the difference between the 'green flag' Scheduled and the 'green flag' Released for Processing (WS)? ). {Note to SAP: Could we have a state transition diagram please? Simple, concise and effective.}
Anyway, the 'tick-pencil' button in SXMB_MONI (aka. CTRL-F8) can be used to cancel the messages in Scheduled/Recorded status. But I'm looking for an ABAP program to do this. The documentation seems to 'suggest' that this button might do the same thing as the ABAP program RSXMB_CANCEL_MESSAGES. However, this ABAP program does not cancel messages in Scheduled status (only the messages in Error), whereas the SXMB_MONI CTRL-F8 'tick-pencil' will cancel messages in Scheduled status if they are selected.
Is there another ABAP program available to cancel messages in Scheduled status - or is it possible to create a variant of RSXMB_CANCEL_MESSAGES that will do this? (I'm not an ABAP programmer and I've never created a variant, but looking at the code, it seemed it might be possible to get the program to read messages in Scheduled status rather than Error status.)
Many thanks for any help.
Mark

Messages are in scheduled status because they still in the queue in either 'READY' status or 'EXECUTING' status (see SMQ1/SMQ2). You don't want to automatically cancel messages that are in scheduled status because that means you are also going to cancel good messages. However, in some cases, you may want to cancel such messages especially when the message in the queue has been in 'Executing' status for long time (happens in case of long running mapping program or dropped connection etc). Such cases warrant manual intervention and hence the behavior as noted by you.
If you can tell me why exactly you want to cancel messages that are in scheduled status, I can help you more.
Thanks
KK

How to create Inbound Idocs in a ABAP program? Any function Module?

Hello Experts,
My requirement is : I have sales order data which I extracted from third party system in my internal tables. In the same box I need to create inbound Idocs and then consequently create sales orders.
I have used the function module IDOC_INBOUND_WRITE_TO_DB to create inbound Idocs from Sales Orders data in internal tables. I have populated all the data records with correct PSGNUM and HLEVEL values. My plan is to create inbound idocs with this function module and send those to IDOC_INPUT_ORDERS function module which creates Sales Orders.
If a sales order in the internal table in ABAP program contains only one item, then I am getting correct idocs. But if more than one item exists for a sales order then the line item segments which got repeated in Idoc are having PSGNUM and HLEVEL values as zero when I checked in WE02. As a result the hierarchy from the second item segment is getting disturbed and getting the status 60.
I populated T_EDIDD with data records from IDOC_INBOUND_WRITE_TO_DB.
To the function module IDOC_INPUT_ORDERS, T_EDIDC and T_EDIDD are the input. I observed that in T_EDIDD also the PSGNUM and HLEVEL values are blank.
I am getting Status 60 with message 'EDI: Syntax error in IDoc (segment cannot be identified)' for idocs which have more than one item.
I need to extract sales data from third party and create inbound idocs and create sales orders in one ABAP program only. I need to display corresponding Idoc numbers for the corresponding third party sales order number in a listoutput.
Can anybody please provide inputs?
Regards.

Hi Anjali,
Thanks for the response.
I have passed the PSGNUM and HLEVEL values while populating the data records. Then I sent the data records and control record information to the function module IDOC_INBOUND_WRITE_TO_DB. Inside this function module there is code to clear the PSGNUM values and HLEVEL values.
for compatibility: clear administration data of data records
           perform data_records_wipe
                                  tables
                                      t_data_records.
FORM DATA_RECORDS_WIPE
                  TABLES
                      T_DATA_RECORDS_IN STRUCTURE EDIDD.
LOOP AT T_DATA_RECORDS_IN.
    CLEAR: T_DATA_RECORDS_IN-MANDT,
           T_DATA_RECORDS_IN-DOCNUM,
           T_DATA_RECORDS_IN-SEGNUM,
           T_DATA_RECORDS_IN-PSGNUM,
           T_DATA_RECORDS_IN-HLEVEL.
    modify t_data_records_in.
ENDLOOP.
ENDFORM.                               " DATA_RECORDS_WIPE
This is the code which is clearing all the PSGNUM and HLEVEL values. After coming out of this function module we are getting the error idocs created with disturbed hierarchy.
I need to create INBOUND Idocs with the data in ABAP program.
Please let me know if any inputs? Is there any function module existing to create Inbound Idocs inside an ABAP program?
Regards

Call an ABAP program or a function module from command prompt/python script

Dear All,
I want to call a function module/ABAP program from command prompt or a python script.
Let me explain with an example.
There is a function module "z_add" that takes two integers as input parameters and generates their sum.
the sum is the output parameter.
Now i want to call this function module from command prompt / python script and pass parameters to this function module.
In return i must get the sum(i.e. the output of function module).
I tried using STARTRFC ,was able to call the FM but could not get the return value(output) from FM.
Can you please provide me the code of such a function module and the method to call it thereby passing parameters and getting the sum.
Thanks and regards,
Gaurav
Edited by: gauravkec2005 on Mar 4, 2010 7:41 AM

thank you both! helpful answers! :o)
anyway!
i have written the program which is called from the SAPScript:
    /:       PERFORM GET_VATNUMBER IN PROGRAM ZFI_F140_OPERATIONS
    /:       USING &BKPF-BUKRS&
    /:       CHANGING &VATNUMBER&
    CE       VAT Registration No : &VATNUMBER&
    REPORT zfi_f140_operations.
    FORM get_vatnumber TABLES in_par STRUCTURE itcsy
                              out_par STRUCTURE itcsy.
      DATA: lv_co_code TYPE bukrs,
            lv_vat_no TYPE stceg.
      READ TABLE in_par WITH KEY name = 'BKPF-BUKRS'.
      MOVE in_par-value TO lv_co_code.
      SELECT SINGLE stceg FROM t001
        INTO lv_vat_no WHERE bukrs = lv_co_code.
      out_par-name = 'VATNUMBER'.
      WRITE lv_vat_no TO out_par-value.
      CONDENSE out_par-value.
      MODIFY out_par INDEX 1.
    ENDFORM.
it is not working and i cannot work out why...
i have not been ABAPing for very long but have had a go....
any thoughts as to what i have done wrong?
or point me where i should be looking? thank you!

ABAP Programing help regarding function modules coding

Hi,
i'm currently creating a function module that retrieve a number from a table and add one to it and return back the value to the table.
the codes are as follow:
FUNCTION ZFM_NUMBER
" * " Local Interface:
" EXPORTING
"      VALUE (ZZNUMBER) TYPE ZNUMBER
"      VALUE (ZENUMBER) TYPE ZNUMBER
SELECT ZNUMBER FROM ZTAB_NUM into ZZNUMBER.
END SELECT.
ZENUMBER = ZZNUMBER + 1.
UPDATE ZTAB_NUM SET ZNUMBER = ZENUMBER WHERE ZNUMBER = ZZNUMBER.
END FUNCTION.
this function module works finely, but now i need to concatenate the number with the year to store it into another table.
i know something about the sysdatum where i select only the first 4 characters...but i'm not sure how could i do that?
do i need to create another function module to call the above function module and concatenate it with the year?
or i just need to continue the codes in the same function module?
and how should i code it?
i'm very new to abap coding and i could'nt get help from anyone in my team. your help is very much appreciated!!!
Thanks,
leesyy

hi you can do it in the same function module.
SELECT ZNUMBER FROM ZTAB_NUM into ZZNUMBER.
END SELECT.
instead of the above statement use the following statement, it improves performance of your program
SELECT single ZNUMBER FROM ZTAB_NUM into ZZNUMBER.
in the above statement you can also specify some where condition
ZENUMBER = ZZNUMBER + 1.
UPDATE ZTAB_NUM SET ZNUMBER = ZENUMBER WHERE ZNUMBER = ZZNUMBER.
data: var_date type sy-datum,
      var_yyyy(4) type c,
      var_numyear(10) type c.
var_date = sy-datum.
var_yyyy = var_date+0(4).
concatenate ZENUMBER var_yyyy into var_numyear.
UPDATE ZTAB_NUMyear SET ZNUMyear = var_numyear WHERE ZNUMBER = ZZNUMBER.
Regards
Sajid
Edited by: shaik sajid on Jan 14, 2010 5:08 AM
Edited by: shaik sajid on Jan 14, 2010 5:09 AM

How to create crystal reports from ecc abap program?

Hi all,
I am new to sap ecc to bo report!!
I heard that abap program cannot be directly connected to crystal reports,
So created a function module which is equivalent to the abap program!!
And happened to connect the same in crystal !!
Can anyone let me know how to proceed !!
will be there any performance issue ?
can anyone guide me how to do reporting from ecc function module to crystal reports directly?
Thanks

Hi Pooja,
From what I know, not all ABAP programs can be accessed in Crystal Reports. The program should return rows and columns, otherwise, CR would not be able to report off it.
I'm not sure if there are any performance issues if we follow your path. Do you experience any?
And, do you need help in creating a report on the function module, I mean do you also have any design related queries?
-Abhilash

Call ABAP Program from outside SAP

Hi all,
How can I call an ABAP program from outside SAP, for example from a C++ executable, a .NET assembly or a JAVA package ? Are their "adapters" provided by SAP for this ?
Angela

Hi Angela,
as mho already stated:
For external connections to ABAP, the sap-proprietary "remote function call (RFC)" is a common way.
SAP delivers an RFC-library for this, and for some development environments SAP even offers a connector on top of this library to make connectivity more easy (SAP Java Connector, SAP Business Connector, SAP Connector for Microsoft .Net). An RFC is always starting function modules in ABAP, not ABAP programs, and these function modules need the attribute "remote-enabled".
(Remark: in the context of SAP NetWeaver Process Integration, SAP offers adapters for connectivity, also for ABAP systems.)
For ABAP systems on basis code line 6.20 and above, the remote-enabled function modules can externally be used as web services.
Information on RFC can be found in the SAP Help Portal http://www.help.sap.com, e.g. [RFC Call - Example Program|http://help.sap.com/saphelp_nw04/helpdata/en/3d/733760ccb411d2b4550060941936e3/frameset.htm]. A search in SDN provides links to the Help Portal as well.
>
Angela GALACY wrote:
> For example, what if I develop an EJB inside NetWeaver, will I be able to access this from any J2EE client ?
This part is beyond the ABAP question, and my guess is pretty simple: like on any other J2EE server.
Regards, Boris

What to write in ABAP program at R/3 to call proxy classes.

Hi
I am working on R/3 to File scenario and using ABAP Proxy for outbound.
I have generated proxy in XI server and have coded the program in R/3 but can one tell me wht code needs to be written in ABAP program at R/3 end to connect to ABAP proxy. How those objects will be available in R/3 side.
Please help as it's urgent.
thanks
Ria

Hi Rekha,
Thanks for the link, I did write this code already as follows.
data prxy type ref to zxico_zproxy_interface_po .
create object prxy.
data it type zxipurch_order_info_snd.
try.
     it-purchorderinfo_snd-ebeln = '000010'.
     it-purchorderinfo_snd-werks = '2320'.
     it-purchorderinfo_snd-bedat = '10/11/2005'.
     it-purchorderinfo_snd-potype = '0'.
     call method prxy->execute_asynchronous
       exporting
         output = it.
      commit work
   catch cx_ai_system_fault .
     data fault type ref to cx_ai_system_fault .
     create object fault.
     write :/ fault->errortext.
endtry.
When I do syntex check it give me error message:
The type "ZXICO_ZPROXY_INTERFACE_PO" is unknown. SInce this object was created in XI client so is not available in the R/3 just wondering do i need to create this in R/3 side.
Regards
Ria

Trigger process chain in ABAP program

Hi Experts,
We have a requirement to trigger the process chain from an ABAP program. I used the function module RSPC_API_CHAIN_START to trigger the process by passing the process chain name in 'I_CHAIN' and it worked. However, the client wants to trigger this using batch user name as few planners do not have authorization when they executed the custom transaction.
Based on the return code of the function module I am capturing the status for tracking.
Please suggest if there is any alternate solution to pass the user name while triggering a process chain in an abap program.
Thanks and Regards,
Pavithra

hi Chintai,
in bw side, you create a abap program to trigger an event in r/3,
and include this abap program in your process chain, the abap program like
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
eventid = 'ZRUNJOB_DEL'
and in r/3 schedule the program to delete previous data with 'after event',
the event name is same as raise by bw process chain, in this sample ZRUNJOB_DEL.
hope this helps.

Fork in process chain using ABAP program

Hello everyone.
I need a fork in my chain. Depending on the values in some db table I will make a decision: do some process or skip and go further. The only solution I can see is using ABAP program. But unfortunately It doesn't return status. Any suggestion will be appreciated.

Hi,
You have few process to run after the abap program. So make all those process as a different chain, and at the end of the ABAP program include a function module to trigger this chain, based on your condition.
If you like this idea, please revert for more information.
Hope this helps.
Thank you,

Print the result of an ABAP Program (in an infoset) in a ABAP List viewer.

Hi ,
Here is my question :
I have created an user group in SQ03
I have created an infoset in SQ02 and a query in SQ01.
In my infoset I have a piece of program which looks like that :
SELECT EVVERTRAG EVBSTATUS EVANLAGE EVVKONTO EV~EINZDAT
EVAUSZDAT EVCOKEY ETABRDATS ETABRVORG ETSPARTE ETTRIGSTAT
ETABLEINH EUIINSTLNINT_UI EUITRANS~EXT_UI
INTO (T_OFB-CONTRAT,T_OFB-STATUT_TRAIT,T_OFB-INSTAL,T_OFB-CMPTE_CONTRAT,
T_OFB-DATE_IN,T_OFB-DATE_OUT,T_OFB-GSR, T_OFB-DATE_CALCUL
,T_OFB-OPE_CALCUL,T_OFB-SECTEUR,T_OFB-STATUT_ORDRE,T_OFB-UNITE,
T_OFB-CLE_PDL,T_OFB-DES_PDL )
FROM ( ever as ev inner join etrg as et
ON evanlage = etanlage )
     inner join euiinstln
     ON euiinstlnanlage = evanlage
     inner join euitrans
     ON euitransint_ui = euiinstlnint_ui
WHERE ET~TRIGSTAT = '2'
ORDER BY EV~ANLAGE.
This program works fine, but when I create my query, I can just see the result in abap list.
When I choose "abap list viewer" or "Excel format", the result is more like :
" select * from all tables "
Is there a way to show the result in the viewer ?
I added a "WRITE :/ <column1>, <column2>, but the result is the same.
I also wonder if we can do a "group by " in ABAP.
And do you know how to make a condition " where my_date < today -19 days" ?
Thank you in advance for your answers.
I've been around the others posts and you did such a great job.
Laurent.

hi Chintai,
in bw side, you create a abap program to trigger an event in r/3,
and include this abap program in your process chain, the abap program like
CALL FUNCTION 'BP_EVENT_RAISE'
EXPORTING
eventid = 'ZRUNJOB_DEL'
and in r/3 schedule the program to delete previous data with 'after event',
the event name is same as raise by bw process chain, in this sample ZRUNJOB_DEL.
hope this helps.

How to execute Infopackage with an ABAP program

Dear All,
I would like to execute an infopackage every 6th day of the month.
Therefore I would like to integrate a program in a process chain executed on a daily basis, and call with this program the execution of the infopackage if day = 6.
Do you know how to execute an infopackage inside an ABAP program ? Which function module use ?
Thanks,
Greg

Hello luminy13,
Just to answer your question on how to start an InfoPackage inside an ABAP program: you can use function module BAPI_IPAK_START. You might also need to use FM BAPI_IPAK_CHANGE to change the scheduling.
However, if the only reason you are creating the ABAP program is to run the InfoPackage at the 6th day of the month, then I don't recommend that you create the ABAP program at all. You can simply schedule the InfoPackage (or the process chain that contains it) on the 6th day of the month. Here's how to do it:
In the scheduling dialog, click the ">>" button. Enter the factory calendar, put 6 is in the workday and then choose "beginning of the month".
Hope this helps.

Mass tcode creation from abap programs

Experts,
Is there any way to create tcodes for 200 abap programs through any function modules or any abap programs..
Regards,
Suresh
Edited by: Suresh Palani on Dec 5, 2009 8:02 AM

hi
through recording method (BDC) u will do this thing.
create recording through SHDB in transaction se93.
regards,
Abhilash

How to generate an OUTBOUND INVOICE IDOC from the ABAP Program?

How to generate an OUTBOUND INVOICE IDOC from the ABAP Program? Any Function Module that can be used for this?

Hi
This is more of configuration
(1) Create a Output type with Medium 6 ( Check with your functional consultant)
(2) Maintain Partner Profiles using WE20 transaction
       Idoc type - INVOIC02
       Message type - INVOIC
       Process Code - SD09
Regards
Madhan D

ABAP program is cancel , Function ROLLBACK on connection failed

Similar Messages

Maybe you are looking for