ABAP Proxy in CONS doesnu0092t work!

Hi guys,
Scenario: ERP -> PI
Im using value mapping tables in PI 7.1 and the standard mass data outbound interface as well (ValueMappingReplicationOutSynchronous). In DEV sys everything works fine, but in CONS sys not really!!! I run the transported report that calls this outbound interface and nothing happens, no entries in sxi_monitor of ERP, no entries in smq2 and dont understand what is going on I already debugged the report and it seams ok, it ends like the message has been sent
Do I miss something? Anyone has faced this issue?
Thanks in advance,
Ricardo.

Fixed!
The Integration Engine Configuration, some how, was forgotten by the Admin team...

Similar Messages

How do ABAP Proxy and XI adapter work?

Hi everybody,
I have a general question about the ABAP proxy and XI adapter.
In order to use the ABAP proxy and XI adapter, I must configure the HTTP Destination between the R/3 system and the XI server. I must also maintain the SLD.
After several hours configurations with our administrator, it failed. At least the HTTP Destinations on both servers don't work correctly. We got always HTTP error message. But a scenario with an ABAP Receiver proxy works! It is really strange and laughable. We're very happy about that but don't know why and what happened. Today we tested the ABAP Sender proxy, it doesn't work.
So we decide to ask the XI experts in this forum to give us a general lessen about the ABAP proxy: how it works, why we should create the HTTP destinations, how do the destinations work and so on.
Thanks a lot in advance!
With best regards
Xiang

Hi
Once you create the interface in XI, you generate the proxies on your R3 system.
Client Proxies -->
This is done for outbound interfaces. You generate the proxy and then write a report that fills in the proxy class with the data and pushes it to XI.
Server proxies -->
Generated for inbound interfaces. Generate the proxy and write the implementation for the exectue method that deals with the data sent from XI to the R3 system
Abap Proxy
ABAP Proxies in XI(Client Proxy)
Smarter Approach for coding ABAP Proxies
The specified item was not found.
ABAP Proxy - XML to ABAP Transformation
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
why we should create the HTTP destinations, how do the destinations work and so on.
we create http destiantio because in proxies , adapter is not use so who is goin to send the message to integration server ...by creating http destinatio we create integration engine which send messg to IS . then messg is routed .and all
error in HTTP to file scenario http to file
hope this help's you
Regard's,
Chetan Ahuja

My simple Inbound ABAP Proxy code doesn't work in PI 7.1 EHP1 SP3 ?

Hi,
I just installed and configure new PI 7.1 EHP 1 SP3 and i tried some simple abap proxy but seems like doesn't work.
Please advise what is missing base on my simple abap code below :
=================================================================================================
METHOD zpi711ii_si_syn_in_aaeproxy~si_syn_in_aaeproxy.
**** INSERT IMPLEMENTATION HERE **** ***
DATA: inputdata TYPE ZPI711MT_REQ_1,
outputdata TYPE ZPI711MT_RES_1.
CONCATENATE inputdata-mt_req_1-firstname ' ' inputdata-mt_req_1-lastname INTO outputdata-mt_res_1-fullname.
ENDMETHOD.
=================================================================================================
i have put some break on the CONCATENATE seems like inputdata-mt_req_1-firstname is empty ? why ?
The sample xml input is :
=================================================================================================
<n0:MT_REQ_1 xmlns:n0="http://www.abeam.com/sample/pi" xmlns:prx="urn:sap.com:proxy:ST6:/1SAI/TAS1190827B531A473B357B:700:2008/06/25">
<FIRSTNAME>This is a string 4</FIRSTNAME>
<LASTNAME>This is a string 5</LASTNAME>
</n0:MT_REQ_1>
=================================================================================================
Please advise
Thank You and Best Regards
Fernand

Hi Fernand ,
Few things to check :
1. hope you are accessing the correct node of proxy structure and the correct message type too.
2.. If the occurrence of node is 1 to many than it will be a table type in that case your need to use a loop to access row values.
Make sure that you have used the correct message types for creating variables..
DATA: inputdata TYPE ZPI711MT_REQ_1,
outputdata TYPE ZPI711MT_RES_1.
--->inputdata-mt_req_1-firstname ' ' inputdata-mt_req_1-lastname
>once you have created the variable of particular messagetype than you have to use in this format inputdata-firstname and inputdata-lastname. seems some thing fishy here...inputdata-mt_req_1-firstname/lastname.
Regards ,

ABAP Proxy outbound doesn't work

Hi All,
I want to develop an ABAP Proxy to SQL server scenario.
So, I created a interface in Integration Builder and created a proxy on outbound message interface in SPROXY.
When i execute sender program in R3 , it works fine, but It doesn´t reach the PI system.
Outbound message t doesn´t appear in SXMB_MONI in R3 nor Pi system.
What is wrong?
Thanks, in advance
Carme

Our basis team has changed the hostname of our R3 QAs system , but no changes are made in SLD of Pi system.
I think this could be the cause of this issue.
¿can anyone confirm this point?
If yes, ¿what must i do to recover this functionality?
Thanks,
Carme

SOAP-XI-ABAP Proxy scenario suddenly not working... with some error.

Hi,
My interface is WS-XI-ABAPproxy.
It was working fine. And I was able to test end-to-end using XML spy.
After 5 days when I tested it again it is not working.
I didnt make any changes.
Today when I run, it is giving error in XI box.
Please find trace from XI box.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="2" type="T">Request Line = POST /sap/xi/engine?type=entry HTTP/1.1</Trace>
<Trace level="2" type="T">Host = sapxidev.sw.schwans.net:8080</Trace>
<Trace level="2" type="T">Server protocol = HTTP/1.1</Trace>
<Trace level="2" type="T">Remote address = 10.1.5.143</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = XI1</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSR_XI1</Trace>
<Trace level="1" type="Timestamp">2007-12-27T23:10:34Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = ED93DCC0B4D011DCCE59001438BE3377</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = ED93DCC0B4D011DCCE59001438BE3377</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = ED93DCC0B4D011DCCE59001438BE3377</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 000</Trace>
<Trace level="1" type="T">Message status 000</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">start CHECK_INTERFACE</Trace>
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface SqlSender_MI*</Trace>
<Trace level="1" type="T">select interface namespace http://tsfco:I_CRM_SQL_COM_SC:XX:BpFromSqlToCrm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">end CHECK_INTERFACE</Trace>
<Trace level="1" type="T">Set interface action INIT into *MAST*</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = XI1</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSR_XI1</Trace>
<Trace level="1" type="Timestamp">2007-12-27T23:10:34Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2007-12-27T23:10:34Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2007-12-27T23:10:34Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="2" type="T">...valid Receiver w/o Condition: - Sys_CR1_120</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2007-12-27T23:10:34Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 001</Trace>
<Trace level="1" type="T">Message status 001</Trace>
<Trace level="1" type="T">Interface action INIT</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">start CHECK_INTERFACE</Trace>
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface SqlSender_MI*</Trace>
<Trace level="1" type="T">select interface namespace http://tsfco:I_CRM_SQL_COM_SC:XX:BpFromSqlToCrm</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="T">end CHECK_INTERFACE</Trace>
<Trace level="1" type="T">Set interface action DEL into *MAST*</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2007-12-27T23:10:34Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) Sys_CR1_120 CrmReceiver_MI</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: CrmReceiver_MI</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2007-12-27T23:10:34Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 002</Trace>
<Trace level="1" type="T">Message status 001</Trace>
<Trace level="1" type="T">Interface action DEL</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Set interface action DEL into *MAST*</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- 
<Trace level="1" type="Timestamp">2007-12-27T23:10:34Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- 
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOI___0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 003</Trace>
<Trace level="1" type="T">Message status 001</Trace>
<Trace level="1" type="T">Interface action DEL</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Set interface action DEL into *MAST*</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = XI1</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = XIAFUSR_XI1</Trace>
<Trace level="1" type="Timestamp">2007-12-27T23:25:53Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2007-12-27T23:25:53Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
<Trace level="1" type="Timestamp">2007-12-27T23:25:53Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 4C27809CF7983547B356B100F7AED5D2</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping 038CECC0946411DCBCA5E2130A0104F7</Trace>
<Trace level="1" type="T">Interface Mapping http://tsfco:I_CRM_SQL_COM_SC:XX:BpFromSqlToCrm SqlToCrmFsCB_IM</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_SqlToCrmFsCB_MM_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_SqlToCrmFsCB_MM_.</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._SqlToCrmFsCB_MM_</Trace>
<Trace level="2" type="T">Java mapping com/sap/xi/tf/_SqlToCrmFsCB_MM_ completed. (executeStep() of com.sap.xi.tf._SqlToCrmFsCB_MM_</Trace>
<Trace level="3" type="T">Dynamic configuration is empty</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2007-12-27T23:25:53Z CET End of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 005</Trace>
<Trace level="3" type="T">Message version 005</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 005</Trace>
<Trace level="1" type="T">Message status 009</Trace>
<Trace level="1" type="T">Interface action DEL</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Set interface action DEL into *MAST*</Trace>
</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
<Trace level="1" type="Timestamp">2007-12-27T23:25:53Z CET Start of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- 
<Trace level="3" type="T">Calling pipeline service: PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_OUTBINDING</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV">
<Trace level="2" type="T">O U T B O U N D - B I N D I N G</Trace>
<Trace level="2" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">determine OUTBOUND BINDING for:</Trace>
<Trace level="2" type="T">-Mrs2sqlq02_BSer</Trace>
<Trace level="2" type="T">-Sys_CR1_120</Trace>
<Trace level="2" type="T">http://tsfco:I_CRM_SQL_COM_SC:XX:BpFromSqlToCrm.CrmReceiver_MI</Trace>
<Trace level="2" type="T">Channel found: - Sys_CR1_120 - Rcv_Sys_CR1_XI</Trace>
<Trace level="2" type="T">no header mapping defined</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2007-12-27T23:25:53Z CET End of pipeline service processing PLSRVID= PLSRV_OUTBOUND_BINDING</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- 
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 006</Trace>
<Trace level="3" type="T">Message version 006</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="interface activity determination">
<Trace level="1" type="T">Version 006</Trace>
<Trace level="1" type="T">Message status 009</Trace>
<Trace level="1" type="T">Interface action DEL</Trace>
<Trace level="1" type="T">(must be INIT for a new determination)</Trace>
<Trace level="1" type="T">Set interface action DEL into MAST</Trace>
</Trace>
</SAP:Trace>

Hi VJ,
After a couple of times it is getting 402 error.
The error node says:
Error when receiving by HTTP (error code: 402, error text: ICM_HTTP_TIMEOUT)
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>402</SAP:P1>
<SAP:P2>ICM_HTTP_TIMEOUT</SAP:P2>
<SAP:P3 />
Edited by: ashok sri on Dec 28, 2007 8:44 PM

Debugging ABAP Proxy code

Hi,
I have problem in ABAP Proxy. When i upload a XML and test the ABAP Proxy code it is working fine, but when i trigger the change from sender, its updating the wrong value in the database.
I checked the incoming and the converted XML, everything is correct and there is no prob in the XI.
Please tell me is there any way to debug the ABAP Proxy during the actual proccessing i,e. when the change is triggered from the sender.
Thanks and Regards,
Arunsri

I've had the same problem before...everything seemed fine but the xml was not updating the desired values - you have 2 choices - 1. Enable the debugging, but if you have a high volume scenario, then it may cause some issues. Also, I am not sure if you plan to do this in production - as you know, debugging in production is a big No-No.
Option 2 is to just take the stream and store it as a file in the OS. This is what we followed and we were able to figure out the issue with the xml. Make sure you write it in such a way that you can turn it off immediately. In our case, it worked fine for all suppliers but one and this one supplier was sending a double spaced character in between, which was causing the issue.
Regards,
Srini

Reg:Abap proxy creation

Hi All,
I am trying to create proxy in R/3 system using SPROXY TC but it pops out a message as "No connection to Integration Builder" what does it mean and how to proceed with that.
Thanks in advance
B.Lavanya

Hi
Are you configured the necessary settings in R/3 and XI side.
Please check the following links.
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies. [original link is broken]
Clarifications on How to Activate ABAP Proxies?
First verify if your proxy is properly communicating with XI Integration server. Goto SPROXy transaction and see if the replica of IR is available.
Then just refresh and reactivate the proxy that you are calling.
Please refer below links
Debug your ABAP proxy
/people/stefan.grube/blog/2006/07/28/xi-debug-your-inbound-abap-proxy-implementation
SPROXY not working:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83deb90-0201-0010-189c-8d3ff87572f8
ABAP Proxy configuration:
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm

ABAP Proxy Doesnt work in PI 7.0

Hi All,
We have strange problem with ABAP Proxy under PI system
We are getting proxy communication error in PI 7.0 (NOT FROM Business system).
After reading a lot of threads & notes, I performed all the necessary checks, but still no luck.
--> When I click on integration builder from SPROXY T-code it popups correct XI Screen
--> Following parameters are maintained properly
com.sap.aii.connect.repository.name: Server (for example, pwdf0436)
com.sap.aii.connect.repository.httpport: Port (for example, 1080)
com.sap.aii.connect.repository.contextroot: Root (for example, rep)
com.sap.aii.applicationsystem.serviceuser.name: User
com.sap.aii.applicationsystem.serviceuser.pwd: Password
--> All the RFC like AI_RUNTIME_<SID>, LCRSAPRFC & SAPSLDAPI & SLD_UC etc working fine
Following reports are NOT working
SPROX_CHECK_IFR_ADDRESS
SPROX_CHECK_IFR_RESPONSE
SPROX_CHECK_IFR_CONNECTION
Following report execute SUCCESSFULLY
SPROX_CHECK_HTTP_COMMUNICATION
Thanks in advance

Hi Rakesh,
Has the ABAP system been configured as specified in the XI configuration guide (Section on how to configure a business system)?
This would include Integration Engine Configuration in transaction SXMB_ADM, configuration in transaction SLDAPICUST and RFC destinations in SM59.

Simple Inbound ABAP Proxy doesn't work in my new PI 7.1 EHP 1 SP3 ?

Hi,
I just installed and configure new PI 7.1 EHP 1 SP3 and i tried some simple abap proxy but seems like doesn't work.
Please advise what is missing base on my simple abap code below :
METHOD zpi711ii_si_syn_in_aaeproxy~si_syn_in_aaeproxy.
**** INSERT IMPLEMENTATION HERE **** ***
DATA: inputdata TYPE ZPI711MT_REQ_1,
outputdata TYPE ZPI711MT_RES_1.
CONCATENATE inputdata-mt_req_1-firstname ' ' inputdata-mt_req_1-lastname INTO outputdata-mt_res_1-fullname.
ENDMETHOD.
i have put some break on the CONCATENATE seems like inputdata-mt_req_1-firstname is empty ? why ?
The sample xml input is :
<n0:MT_REQ_1 xmlns:n0="http://www.abeam.com/sample/pi" xmlns:prx="urn:sap.com:proxy:ST6:/1SAI/TAS1190827B531A473B357B:700:2008/06/25">
<FIRSTNAME>This is a string 4</FIRSTNAME>
<LASTNAME>This is a string 5</LASTNAME>
</n0:MT_REQ_1>
Please advise
Thank You and Best Regards
Fernand

Hi,
it's empty because you just declared the inputdata structure locally in the method.
I think you shoud refer to the methods's interface.
T.

ABAP Proxy doesnu2019t Work

Hi all,
We have problem about ABAP Proxy (Inbound). We are using a follow scenario:
Legacy ( JDBC ) -> XI -> ABAP Proxy ( ECC Backend )
Recently The ECC Backend was updated ( only data ) , and since than the ABAP Proxys doesnu2019t work. We tested other Adapter, we used Receiver RFC Adapter, and RFC Adapter worked.
We tried a lot of thinks, we regenerated ABAP Proxys, We activated Proxys, taken Refresh Full CPA Cache, we checked SCIF, SMICM, and we couldnu2019t solved the issueu2026..
Could you help us????
Thanks!!!
Fábio Ferri
SAP Consultant XI/ABAP/Netweaver

Hello,
i think for this scenario..you have used XI adapter.
Check HTTP service number.
It should be same as in:
In SAP R3, Transaction - > SMICM : goto->services -> ..you will find HTTP service number..Use the same in XI adapter.
or
Execute transaction : SPROXY
goto-> connection test.
Regards,
Sreenivas.

Pros & Cons for consuming web services in ABAP using ABAP PROXY

Hi,
Other then performence is there any other disadvantages like security,etc for consuming web services in ABAP using ABAP proxy?
I really appreciate if some one provide the more details(Pros & Cons ) regarding cosuming web services and I also want to know is there any other way to consume web services in ABAP.
Thanks.

<i> is there any other way to consume web services in ABAP</i>
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja

How Abap proxy works?

Hi friends,
Can anybody explain me that how actually ABAP proxy works(in both cases clent and server proxy). when shuld we go for proxy.And how proxy seprates business application from technical infrastructure?
If u have any presentation or document on ABAP proxies ,plz send me
Thanks in advance
Shweta

Hi
Adapters are part of the Adapter Framework. Adapters provide the technical connectivity to enable the integration of SAP and non-SAP applications through XIs Integration Engine.Again, Adapters are used for connectivity from and to external systems with XI that cannot communicate via proxies.Adapters are only required in SAP systems older than 6.20 and external systems.
Systems based on 6.20or higher can communicate directly with proxies.
Proxies
The literal definition of a proxy is an object / process authorized to act for another; an agent or a substitute. In simpler terms, proxies in the XI context are objects used to encapsulate the creation (from a sender system) or parsing of XML (at a receiver system) as well as the communication with the relevant runtime components required to send or receive those messages.
Proxies are generated from Message Interface in IR.
The Proxy Runtime controls these objects / processes, and can itself be controlled by the applications it communicates with. The Proxy Runtime currently has the following components available: 1. ABAP Proxy Runtime Communication using XI or Web Services a. Web Service Runtime 2. Java Proxy Runtime Communication using XI (J2EE) The objects that the Proxy Runtime then controls are created via Proxy Generation, for both ABAP and Java. In the following sections a client proxy is used by an application to send messages outside of the system it resides in (normally to the IS in this context). Conversely, a server proxy is used by an application to receive messages from sources outside itself (again, normally the IS in this context).
Proxies are interfaces which will get executed in the application system. They can be created only in the system from message interfaces using the proxy generation functions. You can use proxies for systems with WAS >=6.20
XI will communicate in native language with SAP systems via proxies. Proxies uses XML - SOAP based communication for both ABAP and Java Proxies.
mainly we go for proxies for adapters less communicaton there
Client Proxy: Proxies created out of Outbound message Interfaces.Here XI is receiving some information and is
acting as a client.
Server Proxy : Proxies created out of Inbound message Interfaces.Here XI sends the information to some other system acting as the Server.
we can create the ABAP proxy in ABAP workbench.
Use
Using ABAP the proxy generation function you can generate ABAP proxy objects to an SAP system from an interface description in the SAP Exchange Infrastructure Integration Repository.
Prerequisites
ABAP proxy objects can only be generated for SAP systems that are based on SAP Web Application Server 6.40.
The proxy generation retrieves the WSDL description of the interface from the Integration Repository using HTTP. The address of the appropriate server is taken from the exchange profile (parameters 1, 2, and 3 u2013 see below). Queries to the Repository are subject to authentication. The user and password for these queries are also taken from here (parameters 5 and 6). Information used to navigate from the ABAP Proxy Generation to the initial page of the Integration Builder is also taken from the exchange profile (parameters 1, 2, and 4).
How to create proxy.
http://help.sap.com/saphelp_nw04/helpdata/en/14/555f3c482a7331e10000000a114084/frameset.htm
How to Activate Proxy.
How do you activate ABAP Proxies?
ABAP Server Proxies (Inbound Proxy)
ABAP Server Proxies
OutBound Proxy (Client Proxy)
Smarter Approach for coding ABAP Proxies
ABAP Proxies in XI(Client Proxy)
File to R/3 via ABAP Proxy with good example
File to R/3 via ABAP Proxy
http://help.sap.com/saphelp_nw2004s/helpdata/en/48/d5a1fe5f317a4e8e35801ed2c88246/frameset.htm
Synchronous Proxies:
Outbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2boutbound%2bprogram%2b-%2bpurchase%2border%2bsend
Inbound Synchronous Proxy
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/abap%2bproxy%2binbound%2bprogram%2b-%2bsales%2border%2bcreation
go thru the weblog How do you activate ABAP Proxies? which explains how to activate proxies
Check this for Use Of Proxies
Choose the Right Adapter to integrate with SAP systems
Hope this is useful and clears your doubts
Thanks
Saiyog

Problem with Configuration in Production ( ABAP Proxy - XI - FILE)

Hi All,
I have a ABAP Proxy -> XI -> FILE scenario wich is working perfectly in DEV and QAS environment.
When the person responsible for transporting tried to transport the objects in QAS to PRD, the following error happened:
Direction of communication channel |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA is incorrect.
Correct the direction or choose another communication channel
BS_MA_FileServer_PRD - Business System (FILE)
CC_File_PedidosServ_MA_FileServer_IA - My FILE Communication Channel
This was what the Basis person sent to me. I don't have access to know exactly what happened. And I really don't know what could be wrong or if maybe a component was created wrongly in Production.
Hope you can help.
Points will be given.
tks.. Daniela

You have mentioned FILE is on the receiving side and ABAP proxy is on sender side.
But the error pasted by you clearly shows syntax of a Sender Agreement .
For receiver agreement it should be |<Sender Service>| |BS_MA_FileServer_PRD | CC_File_PedidosServ_MA_FileServer_IA
Bipin

Error while invoking the ABAP Proxy via SOAP Adapter

Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath

> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan

Error while generating ABAP proxy

Hi,
We created a WSDL using lotus notes (Domino) tools. While creating a proxy object using ABAP (transaction SE80), we get the error message "Cannot generate proxy (object missing in WSDL, see long text)" Message no. SPRX084.
We looked at OSS notes and applied 1046046 - Proxy generation problem with external definitions and all dependent notes as we are on a lower support pack. (WAS 6.40. SAPKB64019).
We are wondering if it is anything to do with the format/defintions in the WSDL. Can anyone send me a sample WSDL file that has been used to create an ABAP proxy object successfully. We would like compare the domino generated file. Please note that XI is not involved, we are using ABAP to call a webservice in the internal network application.
Thanks,
Girish

Hi,
I've implemented this proxy without problem and it's working fine in my case (I didn't have to store WSDL file localy and do any changes in it - Netweaver 7.2). If it's not SAP issue as Brad proposed then maybe network admins have set filters that are blocking communication with this service
Best regards
Marcin Cholewczuk

ABAP Proxy in CONS doesnu0092t work!

Similar Messages

Maybe you are looking for